Phase behavior and morphology of equimolar mixed cationic-anionic surfactant monolayers at the air/water interface: isotherm and Brewster angle microscopy analysis

The phase behavior and morphological characteristics of monolayers composed of equimolar mixed cationic-anionic surfactants at the air/water interface were investigated by measurements of surface pressure-area per alkyl chain (pi-A) and surface potential-area per alkyl chain (DeltaV-A) isotherms with Brewster angle microscope (BAM) observations. Cationic single-alkyl ammonium bromides and anionic sodium single-alkyl sulfates with alkyl chain length ranging from C(12) to C(16) were used to form mixed surfactant monolayers on the water subphase at 21 degrees C by a co-spreading approach. The results demonstrated that when the monolayers were at states with larger areas per alkyl chain during the monolayer compression process, the DeltaV-A isotherms were generally more sensitive than the pi-A isotherms to the molecular orientation variations. For the mixed monolayer components with longer alkyl chains, a close-packed monolayer with condensed monolayer characteristics resulted apparently due to the stronger dispersion interaction between the molecules. BAM images also revealed that with the increase in the alkyl chain length of the surfactants in the mixed monolayers, the condensed/collapse phase formation of the monolayers during the interface compression stage became pronounced. In addition, the variations in the condensed monolayer morphology of the equimolar mixed cationic-anionic surfactants were closely related to the alkyl chain lengths of the components.     

Brewster angle microscopy study of poly(epsilon-caprolactone) crystal growth in Langmuir films at the air/water interface

Surface pressure-induced crystallization of poly(epsilon-caprolactone) (PCL) from a metastable region of the surface pressure-area per monomer (Pi-A) isotherm in Langmuir monolayers at the air/water (A/W) interface has been captured in real time by Brewster angle microscopy (BAM). Morphological features of PCL crystals grown in Langmuir films during the compression process exhibit four fully developed faces and two distorted faces. During expansion of the crystallized film, polymer chains slowly detach from the crystalline domains and diffuse back into the monolayer as the crystals "melt". Typical diffusion-controlled morphologies are revealed by BAM during the melting process as the secondary dendrites melt away faster, that is, at a higher surface pressure than the principal axes. Electron diffraction on Langmuir-Schaefer films suggests that the lamellar crystals are oriented with the polymer chain axes perpendicular to the substrate surface, while atomic force microscopy reveals a crystal thickness of approximately 7.6 nm.     

Spontaneous polymerization at the air-water interface: a Brewster angle microscopy study

When a dioctadecyldimethylammonium bromide (DODA) monolayer is spread onto a styrene sulfonate (SSt) aqueous solution, this monomer undergoes a spontaneous polymerization process [Fichet, O; Teyssié, D. Macromolecules 2002, 35, 5352]. However, the polymer synthesized in this monolayer cannot be investigated by classical characterization techniques. Brewster angle microscopy has thus been used as a complementary method in order to study this spontaneous polymerization. From these measurements, the threshold concentration above which the spontaneous polymerization occurs has been determined more precisely; the monomer adsorption under the DODA monolayer has been evidenced as being very fast, as supposed previously; moreover, sodium bicarbonate is confirmed as an inhibitor of the polymerization. Also, the replacement of SSt by toluene sulfonate (TSt) confirms the SSt spontaneous polymerization. Finally, the molecular weight and/or the structure of the polymer synthesized in the monolayer seems to be different from those synthesized in solution.     

Insoluble monolayers of irisresorcinol at the air/water interface

Monolayer properties of irisresorcinol [5-(cis-10-heptadecenyl) resorcinol] were measured at the air/water interface. TheA-T isobars of the monolayers at 10 and 15 mN/m gave two-dimensional thermal expansivities of 1.4 × 10^–4/K and 1.3 × 10^–4/K at a temperature span from 7–40 C, respectively. The- A isotherms of the material showed only a little dependence on temperature from 5–35 C and onpH except at highpH, where monolayers expanded by ionization of resorcinol headgroups. Some types of saccharose in the subphase exhibited a characteristic interaction with irisresorcinol in monolayers, and there is a possibility that this material will be used for molecular recognition of some saccharoses.     

Nystatin in Langmuir monolayers at the air/water interface

The paper presents a thorough characteristics of Langmuir monolayers formed at the air/water interface by a polyene macrolide antibiotic-nystatin. The investigations are based on the analysis of pi/A isotherms recorded for monolayers formed by this antibiotic at different experimental conditions. A significant part of this work is devoted to the stability and relaxation phenomena. It has been found that nystatin forms at the air/water interface monolayers of the LE state. A plateau region, observed during the course of the isotherm compression, is suggested to be due to the orientational change of nystatin molecules from horizontal to vertical position. Quantitative analysis of the desorption of the monolayer material into bulk water indicates that the solubility of nystatin monolayers increases with surface pressure. At low surface pressures, the desorption of nystatin from a monolayer is controlled both by dissolution and by diffusion. However, at the plateau and in the post-plateau region, the desorption does not achieve a steady state and the monolayer is less stable than in the pre-plateau region. However, the presence of membrane lipids, even at a low mole fraction, considerably increases the stability of nystatin monolayers. This enables the application of the Langmuir monolayer technique to study nystatin in mixture with cellular membrane components, aiming at verifying its mode of action and the mechanism of toxicity.     

Surface viscoelasticity of phospholipid monolayers at the air/water interface

The surface viscoelastic properties of monolayers of two phospholipids DPPC (L--dipalmitoylphosphatidylcholine) and DMPE (L--dimyristoylphosphatidyl-ethanolamin), at the air-water interface have been investigated. Two techniques were used for the investigation. One involved use of an interfacial shear rheometer (torsion pendulum apparatus ISR1), to provide measurements of the shear viscosity _s as a function of surface pressure, and the second, a modified LB trough with an oscillating barrier to generate periodie dilation and compression so as to measure the dilational elastic modulusE as a function of surface area.Results indicate a strong dependence of _s andE upon monolayer phases. This suggests that the viscoelastic relaxation of monolayers can be understood as molecular rearrangements, domain exchange and molecular reorientations between different monolayer states.     

Attachment of 80S ribosome to lipid monolayers at air/water interface: An electron microscopy study

The adsorption of 80S ribosome from rat liver to the surface of lipid monolayers at the air/water interface was examined by electron microscopy (EM) using a negative staining method. The results showed that, a large number of 80S ribosomes can be adsorbed to the lipid monolayers containing positively charged octadecylamine (SA), whereas the adsorption of ribosomes to the surface of neutral or negatively charged lipid monolayers was negligible. There existed a proper ratio of SA to complemented neutral lipids which facilitated the maximum binding of ribosomes. Increasing the subphase pH value will enhance the adsorption of ribosome, but when raising the subphase concentrations of K⁺, Mg²⁺ and glycerol, the adsorption of ribosomes can be weakened, suggesting that the driving forces of the adsorption mainly come from the electrostatic interactions between the ribosome and the lipids. The important characteristics of such interactions between the 80S rat liver ribosomes and the lipid membranes, as revealed by this new technology, which may help in the further understanding of the protein biosynthesis is discussed.     

X-ray investigation of monolayers formed at the soft air/water interface

Gibbs or Langmuir monolayers formed at the soft air/liquid interface are easy to handle and versatile model systems for material and life sciences. The phase state of the monolayers can be modified by lateral compression of the film while the layer structural changes are monitored by highly sensitive surface characterization techniques. The use of high brilliant synchrotron light sources for X-ray experiments is essential for the monolayer research. The present review highlights the recent achievements recorded in the monolayer field with a special emphasis on different synchrotron based X-ray characterizing methods as: grazing incidence X-ray diffraction, X-ray reflectivity and total reflection X-ray fluorescence. Some examples of single-chain surfactants, special sugar lipids, and semifluorinated compounds are given. Additionally, thin layers formed by peptides, polymers or nanoparticles are highlighted.     

Anomalous spreading behaviour of polyethyleneglycoldistearate monolayers at air/water interface

Spreading behaviour of the dimeric surfactant polyethylene-glycoldistearate (PEGDS) monolayer at air/water interface has been studied using surface pressure-area (π-A) isotherms as a function of temperature. The isotherms show a plateau suggesting a transition between a liquid expanded (LE) and a condensed state. The condensed state possibly arises due to nucleation and growth of multilayers from the monolayer. Isobaric measurements of bothA-T and π-T at constant area show transitions atT = 295 K. These plots suggest a melting followed by formation of condensed microcrystallites. Structure optimization carried out using various angles of orientation of the alkyl tails with respect to the backbone in PEGDS reveals tilt transitions of the tails in different states which can be related to the packing behaviour seen in the isotherms. Optical microscopy has been used to confirm the structures in these states.     

Polyhedral oligomeric silsesquioxane amphiphiles: isotherm and brewster angle microscopy studies of trisilanolisobutyl-POSS at the air/water interface

A trisilanol derivative of polyhedral oligomeric silsesquioxanes (POSS), trisilanolisobutyl-POSS, has recently been reported to form stable monolayers at the air/water interface. Moreover, the trisilanolisobutyl-POSS monolayer undergoes a nonequilibrium structural transition (collapse) around a surface pressure of Rho approximately 18 mN.m(-1). This paper explores the mono- and multilayer properties of POSS molecules at the air/water interface by the Wilhelmy plate technique and Brewster angle microscopy. Surface concentrations are controlled by four mechanisms: (1) compression at a constant rate, (2) stepwise compression followed by surface pressure relaxation to an "equilibrium" value, (3) successive additions of spreading solution followed by relaxation to a stable surface pressure value, and (4) hysteresis loops to test the reversibility of the structural transitions. Results show that both an increasing compression rate and a decreasing temperature lead to an increase in the surface pressure of the structural transition, which is consistent with the formation of solidlike multilayer domains during the collapse process. For the case of compression at a constant rate, small domains initially form and later aggregate to form large solid masses. Cessation of compression allows these large solid masses to relax into equilibrium ringlike structures with a lower surface pressure, Rho approximately 13 mN.m(-1). In contrast, if the film is expanded rapidly, these large solidlike domains relax into "spaghetti" like networks with a residual surface pressure that depends on the initial amount of the solidlike collapsed phase. Finally, successive addition and stepwise compression isotherm experiments lead to different and time-dependent morphologies. Understanding these surface properties of POSS molecules affords an excellent opportunity to design and study POSS/polymer blends for coating applications where POSS molecules with rigid inorganic cores, soft organic coronae, and dimensions comparable to polymeric monolayers can serve as perfectly monodisperse nanofillers.     

Miscibility of mixed stereoregular PMMA/PVPh monolayers at the air/water interface

The mixed monolayer behavior of stereoregular poly(methyl methacrylate) (PMMA) and poly(vinyl phenol) (PVPh) was investigated from the measurements of surface pressure–area per molecule (π–A) isotherms. The π–A isotherms indicated that isotactic PMMA (iPMMA) and PVPh were miscible at the air/water interface. The miscibility and non-ideality of the mixed monolayers were examined by calculating the excess area as a function of composition, and negative deviations from ideality were observed, which suggest the existence of attractive interactions between iPMMA and PVPh. However, the π–A isotherms of mixed syndiotactic PMMA (sPMMA)/PVPh monolayers showed positive deviation from ideality, which might suggest that non-favorable interactions exist between sPMMA and PVPh.The π–A isotherms of mixed atactic PMMA (aPMMA)/PVPh monolayers exhibited complicated excess area behavior. Both positive and negative deviations from ideality were observed at various surface pressures. These isotherm results of mixed polymers correlate approximately well with the miscibility of the corresponding mixtures in the bulk state. The formation of hydrogen bonding between PMMA and PVPh was substantiated in the bulk state by means of Fourier transform infrared (FTIR). Regardless of tacticity, an increase of hydrogen-bonded carbonyl fraction was observed.     

Long-range nanometer-scale organization of semifluorinated alkane monolayers at the air/water interface

We have determined the structure formed at the air-water interface by semifluorinated alkanes (C(8)F(17)C(m)H(2m+1) diblocks, F8Hm for short) for different lengths of the molecule (m = 14, 16, 18, 20) by using surface pressure versus area per molecule isotherms, Brewster angle microscopy (BAM), and grazing incidence x-ray experiments (GISAXS and GIXD). The behavior of the monolayers of diblocks under compression is mainly characterized by a phase transition from a low-density phase to a condensed phase. The nonzero surface pressure phase is crystalline and exhibits two hexagonal lattices at two different scales: a long-range-order lattice of a few tens of nanometers lateral parameter and a molecular array of about 0.6 nm parameter. The extent of this organization is sufficiently large to impact larger scale behavior. Analysis of the various compressibilities evidences the presence of non organized molecules in the monolayer for all 2D pressures. At room temperature, the self-assembled structure appears generic for all the F8Hm investigated.     

Lateral quantized charge transfer across nanoparticle monolayers at the air/water interface

Lateral quantized charge transfer was observed with gold nanoparticle monolayers at the air/water interface. The electronic conductivity was measured by using an interdigitated arrays (IDA) electrode perpendicularly aligned at the air/water interface where a particle ensemble was trapped between the IDA fingers. The overall voltammetric responses were analogous to that of the Coulomb blockade with a relatively flat central gap. This gap was found to shrink with increasing surface pressure. Differential pulse voltammetry revealed a series of well-defined voltammetric peaks within this central gap, which are ascribed to the single electron transfer of the particle ensemble. This observation was interpreted on the basis of relatively weak electronic coupling between neighboring particles where the particles behave more individually.     

Competition between atmospherically relevant fatty acid monolayers at the air/water interface

Competition and oxidation of fatty acids spread at the air/water interface were investigated using surface-specific, broad-bandwidth, sum frequency generation spectroscopy. At the air/water interface, a monolayer of oleic acid replaced a monolayer of deuterated palmitic acid at equilibrium spreading pressure. Subsequent oxidation of the oleic acid monolayer with ozone resulted in products more water soluble than the palmitic acid; therefore, the palmitic acid monolayer reformed at the surface. Results indicate that the surfactants on the surface of fat-coated tropospheric aerosols will only possess oxidized acyl chains after all less soluble species in the aqueous subphase have been removed through the processes of replacement at the surface and atmospheric oxidation.     

Interactions between phosphatidylcholines and cholesterol in monolayers at the air/water interface

Mixtures of cholesterol and synthetic phospholipids, differing in saturation of phosphatidylcholine (PC) acyl chains, such as distearoyl phosphatidylcholine (DSPC), stearoyl-oleoyl phosphatidylcholine (SOPC) and dioleoyl phosphatidylcholine (DOPC) have been studied as floating Langmuir monolayers at the air/water interface. In order to examine the influence of a polar group, distearoyl phosphatidylethanolamine (DSPE) was chosen. The films were spread at room temperature on aqueous subphases and characterized by the surface pressure-area (pi-A) isotherms and compression modulus (C(s)(-1)) values. The interactions were examined by analyzing the mean molecular areas and quantified by the excess free energy of mixing values. The obtained results indicate that the affinity of cholesterol to saturated/unsaturated phosphatidylcholines does not differ significantly, and revealed strong influence of the kind of a polar group on the cholesterol-phospholipid interactions. On the other hand, the apolar group structure was found to modify the stoichiometry of sterol-PC complexes.     

Catalase monolayers at the air/water interface I. Reversibilities and irreversibilities

/A-isotherms of catalase monolayers established at the air/water-interface are discussed quantitatively on the basis of molecular data: A relationship between a critical value of the surface pressure, the corresponding molecular area, and the molecular dimension of the molecules at the interface is proposed. It is shown that the unfolding of molecules at the water surface is pH-dependent. For each pH-value there is a distinct degree of unfolding; the molecules keep their globular state at neutral pH. Establishment at the surface of bulk solutions corresponding to globular and partly unfolded states, respectively, catalase molecules keep their original configuration on changing the pH-value of bulk-phase. The monolayers are confirmed to show reversibility with regard to lateral changes of state as well as irreversibility with respect to desorption of molecules.A model is proposed to explain the nature of the critical/A-value occurring in the/A-isotherms: on compression beyond _c, molecular segments are transferred from the surface into the bulkphase via a subsurface layer. From the experiments it is concluded that the surface pressure is determined, not only by the surface itself, but also by this subsurface layer.     

Mixed monolayers of Gemini surfactants and stearic acid at the air/water interface

The properties of mixed monolayers composed of the cationic Gemini surfactant ([C(18)H(37)(CH(3))(2)N(+)(CH(2))(3)N(+)(CH(3))(2)C(18)H(37)],2Br(+), abbreviated as 18-3-18,2Br(-1)) and stearic acid (SA) at the air/water interface were investigated by using a Langmuir film balance. The excess areas at the different mixed monolayer compositions were obtained and used to evaluate the miscibility and nonideality of mixing. Due to the electrostatic attractive interactions between 18-3-18,2Br(-1) and SA, the excess areas indicated negative deviations from ideal mixing. Moreover, 18-3-18,2Br(-1) and SA were miscible at the air/water interface, as was confirmed by atomic force microscopy (AFM) images of the LB films transferred onto mica substrates. The attenuated total reflectance (ATR) infrared spectra showed that SA in the mixed monolayers was ionized completely at a composition X(SA)=0.67 and formed a "cationic-anionic surfactant," i.e., the carboxylate, with 18-3-18,2Br(-1) owing to the electrostatic interaction between the head groups.     

Degradation behaviors of polyester monolayers at the air/water interface: Alkaline and enzymatic degradations

The degradation kinetics of Langmuir monolayer films of a series of biodegradable polyesters has been studied to investigate the effect of degradation medium, alkalinity and enzymes. The degradation behavior of polyester monolayers strongly depended on both degradation medium and surface pressure. As the surface pressure was increased, the degradation rates of poly(l-lactide) (PLLA) and poly[(R)-3-hydroxybutyrate] (P(3HB)) increased in both degradation media. When monolayers were exposed to an alkaline subphase, the degradation of PLLA monolayers occurred at relatively low surface pressures; the PLLA monolayers were hydrolyzed at pH 10.5 regardless of surface pressure, while the alkaline degradation of P(3HB) monolayer occurred over a constant surface pressure of 7 mN/m at pH 11.8. These results have been explained by the difference in hydrophilic/hydrophobic balance of the polymers; PLLA is more hydrophilic than P(3HB). In contrast, the enzymatic degradations of both polymer monolayers occurred at higher constant surface pressures than those of the alkaline treatment; 7 mN/m for PLLA and 10 mN/m for P(3HB). This behavior was attributed to the enzymes being much larger than the alkaline ions: the enzymes need a larger contact area with the submerged monolayers to be activated.