Sonocatalytic degradation of Acid Blue 92 using sonochemically prepared samarium doped zinc oxide nanostructures

Pure and Sm-doped ZnO nanoparticles were synthesized applying a simple sonochemical method. The nanocatalysts were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS) techniques which confirmed the successful synthesis of the doped sonocatalyst. The sonocatalytic degradation of Acid Blue 92 (AB92), a model azo dye, was more than that with sonolysis alone. The 6% Sm-doped ZnO nanoparticles had a band gap of 2.8 eV and demonstrated the highest activity. The degradation efficiency (DE%) of sonolysis and sonocatalysis with undoped ZnO and 6% Sm-doped ZnO was 45.73%, 63.9%, and 90.10%, after 150 min of treatment, respectively. Sonocatalytic degradation of AB92 is enhanced with increasing the dopant amount and catalyst dosage and with decreasing the initial AB29 concentration. DE% declines with the addition of radical scavengers such as chloride, carbonate, sulfate, and tert-butanol. However, the addition of enhancers including potassium periodates, peroxydisulfate, and hydrogen peroxide improves DE% by producing more free radicals. The results show adequate reusability of the doped sonocatalyst. Degradation intermediates were recognized by gas chromatography–mass spectrometry (GC–MS). Using nonlinear regression analysis, an empirical kinetic model was developed to estimate the pseudo-first-order constants (k_app) as a function of the main operational parameters, including the initial dye concentration, sonocatalyst dosage, and ultrasonic power.     

Sorption and decomposition of crude oil using exfoliated graphite/ZnO composites

Exfoliated graphite/ZnO composites (EG/ZnO) were prepared by impregnating expandable graphite with Zn(OH)₂, abruptly expanding at 700 °C for 40 s, and heating at 500 °C for 3 h. The composites were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), nitrogen adsorption and mercury porosimetry. The sorption capacity of the composites for spilled crude oil was measured and under UV irradiation the decomposition of the absorbed crude oil was investigated. The results showed that the composites provided with the adsorption and photocatalysis capacity for crude oil at the same time. The sorption capacity of the composites decreased gradually on increasing the ZnO content of the composites. Moreover, the decomposition ratio of the absorbed crude oil increased on increasing the ZnO content or decreasing the weight ratio of crude oil to composites.     

Sonochemical synthesis of Ce-TiO2 nanocatalyst and subsequent application for treatment of real textile industry effluent

Treatment of real textile industry effluent using photocatalysis, sonocatalysis, sonophotocatalysis and H₂O₂ assisted sonophotocatalysis have been studied based on the use of Ce-TiO₂ nanocatalyst synthesized using sonochemical co-precipitation method. Characterization studies of the obtained catalyst revealed crystallite size as 1.44 nm with particles having spherical morphology. A shift of the absorption edge to the visible light range was also observed in UV–Vis diffuse reflectance spectra (UV-DRS) analysis. The effects of different operational parameters viz catalyst dose (0.5 g/L-2 g/L), temperature (30 °C-55 °C) and pH (3–12) on the COD reduction were studied. The reduction in the COD was higher at lower pH and the optimum temperature established was 45 °C. It was also elucidated that the required catalyst dose was lesser in combined sonophotocatalysis when compared with individual photocatalysis and sonocatalysis. Combination of processes and addition of oxidants increased the COD reduction with the sonophotocatalytic oxidation combined with H₂O₂ treatment showing the best results for COD reduction (84.75%). The highest reduction in COD for photocatalysis was only 45.09% and for sonocatalysis, it was marginally higher at 58.62%. The highest reduction in COD achieved by sonophotocatalysis was 64.41%. Toxicity tests coupled with Liquid Chromatography Mass Spectrometry (LC-MS) analysis revealed that there were no additional toxic intermediates added to the system during the treatment. Kinetic study allowed establishing that generalized kinetic model fits the experimental results well. Overall, the combined advanced oxidation processes showed better results than the individual processes with higher COD reduction and lower requirement of the catalyst.     

Different strategies for the synthesis of graphene/ZnO composite and its photocatalytic properties

Owing to its unique physical and chemical properties, graphene has attracted tremendous attention in the preparation of graphene-based composites for various applications. In this study, two different strategies have been developed to load zinc oxide (ZnO) nanorods onto reduced graphene oxide (RGO) sheets, i.e., in situ growth and a self-assembly approach. The microstructure and morphology of the synthesized RGO/ZnO nanocomposites was investigated by X-ray diffraction (XRD), Raman spectroscopy, field emission scanning electron microscopy (FESEM) and Brunauer–Emmett–Teller (BET) measurements. Fluorescence emission spectra (PL) of RGO/ZnO composites were performed to attribute quality of combination between RGO and ZnO. Significantly enhanced photocatalytic activity of RGO/ZnO nanocomposites in comparison to bare ZnO nanoparticles was revealed by the degradation of methylene blue under irradiation, which can be attributed to the inhibition of electron–hole pair recombination and enhanced adsorption due to the presence of RGO sheets.     

Sonocatalytic degradation of a textile dye over Gd-doped ZnO nanoparticles synthesized through sonochemical process

The present study was performed to sonochemically synthesize Gd_xZn_1 − xO (x = 0–0.1) nanoparticles for sonocatalysis of Acid Orange 7 (AO7) in an aqueous medium. The results of X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) analysis confirmed proper synthesis of Gd-doped sonocatalyst. 5% Gd-doped ZnO nanoparticles with band gap of 2.8 eV exhibited the highest sonocatalytic decolorization efficiency of 90% at reaction time of 90 min. The effects of initial dye concentration and sonocatalyst dosage on decolorization efficiency were evaluated. In the presence of sodium sulfate, sodium carbonate and sodium chloride the decolorization efficiency decreased from 90 to 78, 65 and 56%, respectively. Among various enhancers, the addition of potassium periodate improved the decolorization efficiency from 90 to 100%. The highest decolorization efficiency was obtained at pH value of 6.34 (90%). The decolorization efficiency decreased only 6% after 4 repeated runs. Therefore, Gd-doped ZnO nanoparticles can be used as a promising catalyst for degradation of organic pollutants with great reusability potential.     

Comparison of catalytic activities for photocatalytic and sonocatalytic degradation of methylene blue in present of anatase TiO2-CNT catalysts

Anatase TiO(2)-CNT catalysts with high specific surface areas were prepared by depositing TiO(2) particles on the surface of carbon nanotubes (CNTs) using a modified sol-gel technique. These catalysts prepared with different amounts of CNTs were characterized by nitrogen adsorption, Fourier Transform infrared (FT-IR) spectroscopy, scanning electron microscope (SEM), Transmission Electron Microscope (TEM), X-ray diffraction (XRD), Raman spectroscopy, energy dispersive X-ray (EDX) and ultraviolet-visible (UV-Vis) spectroscopy. The catalytic activity of the anatase TiO(2)-CNT catalysts was assessed by examining the degradation of methylene blue (MB) from model aqueous solutions as a probe reaction under visible light and ultrasonic irradiation. The synergistic effect of the greater surface area and catalytic activities of the composite catalysts was examined in terms of the strong adsorption ability and interphase interaction by comparing the different amounts and roles of CNTs in the catalysts.     

紫外吸收光谱法研究ZnO/碳纳米管复合材料催化降解偶氮染料

以Zn(NO₃)₂和酸化多壁碳纳米管为原料采用水热法合成了ZnO/碳纳米管复合材料,产物经X射线粉末衍射(XRD)和透射电子显微镜(TEM)表征,表明六方晶相的ZnO颗粒大小约为28 nm。紫外吸收光谱研究表明, 该复合材料在太阳光照下具有较高的光催化降解偶氮染料的活性。探究了光照时间﹑催化剂用量﹑染料浓度以及不同的染料结构等因素对催化效率的影响,结果表明随光照时间的延长,偶氮染料位于400 nm的特征峰强度逐渐减弱,且偶氮染料的降解呈准一级的反应。该复合材料对三种染料：酸性橙﹑酸性大红﹑酸性嫩黄的溶液都具有较好的降解能力,反应速率分别为0.09,0.28,0.22 mg· L-1·min-1,此光催化降解速率的差异是由于偶氮染料分子中有机官能团的不同所造成。当选用最优条件时,该复合材料可以迅速降解染料,且经过五次循环后,其催化效率仍高于50％。     

水热法制备In2O3/ZnO异质结及其高的光催化性能

采用简单的两步水热法合成了不同In₂O₃质量比的In₂O₃/ZnO异质结复合材料．通过X射线衍射仪(XRD)、紫外-可见分光光度计(UV-vis)和扫描电子显微镜(SEM)对复合材料的结构、形貌和性能进行了表征．同时还使用UV-vis分光光度计测试了异质结降解罗丹明B(RhB)的光催化活性．实验结果表明,与纯ZnO和In₂O₃相比,In₂O₃的引入将ZnO的吸收光谱扩展到可见光区域,从而提高了其光生电子和空穴的分离．此外,In₂O₃/ZnO异质结在可见光照射对RhB具有较高的光催化活性．5 wt%-In₂O₃/ZnO异质结对RhB的降解率为84.3%,且具有良好的光催化稳定性．In₂O₃/ZnO异质结复合材料在有机染料废水的降解中有更广阔的应用前景．     

Visible light induced sonophotocatalytic degradation of Reactive Red dye 198 using dye sensitized TiO2

In this paper we are reporting the accelerated sonophotocatalytic degradation of Reactive Red (RR) 198 dye under visible light using dye sensitized TiO(2) activated by ultrasound. The effect of sonolysis, photocatalysis and sonophotocatalysis under visible light has been examined to study the influence on the degradation rates by varying the initial substrate concentration, pH and catalyst loading to ascertain the synergistic effect on the degradation techniques. Ultrasonic activation at 47kHz contributes through cavitation leading to the splitting of H(2)O(2) produced by both photocatalysis and sonolysis. This results in the formation of oxidative species, such as singlet oxygen ((1)O(2)) and superoxide (O2-*) radicals in the presence of oxygen. Sonication increases the amount of reactive radical species, inducing faster oxidation of the substrate and degradation of intermediates and also the deaggregation of the photocatalyst which are responsible for the observed synergy. Further, the photocatalytic activity of RR 198 dye sensitized TiO(2) is demonstrated by the degradation of phenol under visible light and ultrasound. A comparative study using TiO(2), Hombikat UV 100 and ZnO was also carried out.     

Preparation, characterization and photocatalytic activity of the neodymium-doped TiO2 hollow spheres

Nd-doped titania hollow spheres were prepared using carbon spheres as template and Nd-doped titania nanoparticles as building blocks. The Nd-doped titania nanoparticles were synthesized at low temperature. The prepared hollow spheres were characterized by X-ray diffraction (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS) and UV-vis diffuse reflectance spectrum (DRS). The effects of Nd content on the physical structure and photocatalytic activities of doped titania hollow sphere samples were investigated. Results showed that there was an optimal Nd-doped content (3.9 at.%) for the photocatalytic degradation of dye X-3B (C.I. Reactive Red 2). The apparent rate constant of the best one was almost 9 times as that of P25 titania. The mechanism of photocatalytic degradation of dyes under visible light irradiation was also discussed.     

Eu-doped ZnO nanoparticles: Sonochemical synthesis,characterization, and sonocatalytic application

Undoped and europium (III)-doped ZnO nanoparticles were prepared by a sonochemical method. The prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS) analysis. The crystalline sizes of undoped and 3% Eu-doped ZnO were found to be 16.04 and 8.22 nm, respectively. The particle size of Eu-doped ZnO nanoparticles was much smaller than that of pure ZnO. The synthesized nanocatalysts were used for the sonocatalytic degradation of Acid Red 17. Among the Eu-doped ZnO catalysts, 3% Eu-doped ZnO nanoparticles showed the highest sonocatalytic activity. The effects of various parameters such as catalyst loading, initial dye concentration, pH, ultrasonic power, the effect of oxidizing agents, and the presence of anions were investigated. The produced intermediates of the sonocatalytic process were monitored by GC–Mass (GC–MS) spectrometry.     

Deposition of silver nanoparticles on carbon nanotube by chemical reduction method: Evaluation of surface,thermal and optical properties

Silver was stabilized on multi-walled carbon nanotubes (MWCNTs) by chemical-reduction technique using N,N-dimethylformamide (DMF) as a reducing agent. The influence of silver on the performance of carbon nanotubes (CNTs) was investigated by employing Fourier-transform infrared spectra (FTIR), Raman spectroscopy (RAS), thermal gravimetric analysis (TGA), zeta potential measurement, scanning electron microscope (SEM), electron dispersive X-ray spectrometer (EDX), transmission electron microscopy (TEM), and reflectance spectroscopy (RS). FTIR as well as RS methods evidenced the synthesis procedure using chemical reduction method was successful. Performing TGA of the samples under oxygen atmosphere demonstrated that the silver nanoparticles (Ag NPs) generated on MWCNTs surface can decrease the thermal stability of the particles by the catalytic oxidation of CNTs. In contrary, the thermal stability of the MWCNTs has improved under nitrogen atmosphere. EDX results showed the presence of Ag, Au and Co on the surface of deposited sample. The synthesised silver multi-walled carbon nanotubes (Ag–MWCNTs) were found to have higher UV reflection activity compared with untreated particles. The Ag–CNTs can be used in producing anti-UV composites.     

Visible-light photocatalytic degradation of methylene blue with laser-induced Ag/ZnO nanoparticles

The preparation of Ag doped ZnO nanoparticles conducted through the method of laser-induction is presented in this work. The Ag/ZnO nanoparticles attained from various weight percentages of added AgNO₃ relative to ZnO were applied under visible-light irradiation for evaluating the heterogeneous photocatalytic degradations of methylene blue (MB) solutions. It was shown that the catalytic behavior of Ag/ZnO nanoparticles in the visible-light range is notably improved through the Ag deposition onto ZnO nanoparticles by the method of laser-induction with a maximum effectiveness of 92% degradation. The properties of the nanoparticles were characterized by the employments of UV-vis spectroscopy (UV-vis), X-ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDX), and selected-area electron diffraction (SAED).     

Rapid microwave-assisted synthesis and electrochemical characterization of gold/carbon nanotube composites

Hybrid nanostructures composed of gold nanoparticles (NPs) and carbon nanotubes (CNTs) have been prepared by a microwave-assisted method in the mixed solvents of oleylamine and oleic. The morphology, structure and composition of as-obtained Au/CNT composites are characterized by transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD). The composites show characteristic plasmon absorption of Au NPs in the Ultraviolet–visual spectrum. Fourier transform infrared spectrum shows the successful introduction of functional groups on the surface of CNTs, which are crucial factors to assist the nucleation in situ of Au NPs on the surface of CNTs. Electrochemical measurements show the enhancement electrochemical response for the gold electrode modified with Au/CNT composites.     

Preparation of highly efficient Al-doped ZnO photocatalyst by combustion synthesis

Novel Al-doped ZnO (AZO) photocatalysts with different Al concentrations (0.5–6.0 mol%) were prepared through a facile combustion method and followed by calcination at 500 °C for 3 h. The obtained nanopowders were characterized by powder X-ray diffraction (XRD), scanning electron microscope (SEM) combined with EDX, transmission electron microscope (TEM), Fourier transform infrared spectroscopy (FTIR), UV–vis spectroscopy and photoluminescence spectroscopy. The XRD patterns of AZO nanopowders were assigned to wurtzite structure of ZnO with the smallest crystallite size about 11 nm consistent with the results from TEM. The doping of Al in ZnO crystal structure successfully suppressed the growth of ZnO nanoparticles confirmed by XRD patterns. The absorption spectra analysis showed that the optical band gap energy (E_g) for the AZO nanopowders were in the range of 3.12–3.21 eV and decreased with increasing of Al dopant. The photocatalytic activities of the samples were evaluated by photocatalytic degradation of methyl orange under visible light (λ ≥ 420 nm) and sunlight irradiation. The results showed that the AZO photocatalyst doped with 4.0 mol% Al exhibited five times enhanced photocatalytic activity compared to pure ZnO. The enhanced photocatalytic activity could be attributed to extended visible light absorption, inhibition of the electron–hole pair's recombination and enhanced adsorptivity of MO dye molecule on the surface of AZO nanopowders.     

Preparation,characterization and photocatalytic performance of noble metals (Ag,Pd, Pt,Rh) deposited on sponge-like ZnO microcuboids

Novel sponge-like ZnO microcuboids with a hierarchical structure were fabricated via an alcoholic thermal process. Then a series of noble metals (Ag, Pd, Pt, Rh) was loaded onto the microcuboids. The samples obtained were characterized by nitrogen physical adsorption, powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-vis diffuse reflectance spectroscopy (DRS), and X-ray photoelectron spectroscopy (XPS). The results show that the ZnO microcuboids have a high surface area and a sponge-like hierarchical structure. Activity tests for the degradation of acid orange II dye showed that the noble metals enhanced the activity of ZnO to different extents. For loading of 0.5 wt.%, the activity enhancement decreased in the order Pd>Ag>Pt>Rh. Co-loading of Pd and Ag had a detrimental effect on activity compared to single loading. The enhanced photocatalytic performance can be attributed to an increase in the rate of separation of photogenerated e^–/h⁺ pairs induced by the noble metals.     

Sonocatalytic removal of naproxen by synthesized zinc oxide nanoparticles on montmorillonite

ZnO/MMT nanocomposite as sonocatalyst was prepared by immobilizing synthesized ZnO on the montmorillonite surface. The characteristics of as-prepared nanocomposite were studied by scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HR-TEM) and X-ray diffraction (XRD) techniques. The synthesized samples were used as a catalyst for sonocatalytic degradation of naproxen. ZnO/MMT catalyst in the presence of ultrasound irradiation was more effective compared to pure ZnO nanoparticles and MMT particles in the sonocatalysis of naproxen. The effect of different operational parameters on the sonocatalytic degradation of naproxen including initial drug concentration, sonocatalyst dosage, solution pH, ultrasonic power and the presence of organic and inorganic scavengers were evaluated. It was found that the presence of the scavengers suppressed the sonocatalytic degradation efficiency. The reusability of the nanocomposite was examined in several consecutive runs, and the degradation efficiency decreased only 2% after 5 repeated runs. The main intermediates of naproxen degradation were determined by gas chromatography–mass spectrometry (GC–Mass).     

Synthesis of a composite consisting of carbon nanotubes and graphite shell-encapsulated cobalt nanoparticles using plasma-enhanced chemical vapor deposition

We report a simple and effective one-step synthesis route for synthesizing a composite consisted of carbon nanotubes (CNTs) and graphite shell-encapsulated cobalt nanoparticles using plasma-enhanced chemical vapor deposition on Si (1 0 0) substrate covered with catalyst Co particles, discharging a mixture of H₂ and CH₄ gas, and characterize the obtained composite by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, high resolution transmission electron microscope, and X-ray photoelectron spectroscopy. The results show that CNTs align perpendicularly to the substrate and graphite shell-encapsulated Co nanoparticles clung to the external surfaces of aligned CNTs. The diameter of the graphite shell-encapsulated Co nanoparticles increases with increasing the H₂ content in H₂ and CH₄ carbonaceous gas. A possible growth mechanism of the CNTs and graphite shell-encapsulated cobalt nanoparticles composite has been explored.     

Preparation and photocatalytic properties of silver nanoparticles loaded on CNTs/TiO2 composite

In this study, new nanoscale photocatalyst based on silver and CNTs/TiO₂ was successfully prepared by photoreduction method. The prepared Ag-CNTs/TiO₂ was characterized by TEM, XRD and XPS. The photocatalytic activity was also evaluated by photocatalytic degradation of Reactive Brilliant Red X-3B dye. The results indicated that the photocatalytic efficiency of CNTs/TiO₂ increased in the presence of Ag nanoparticles and the photocatalysis reaction followed a first order kinetics. The kinetic constant of Ag-CNTs/TiO₂ for dye degradation was nearly 1.2 times than that of CNTs/TiO₂, which indicated decorating Ag nanoparticles on CNTs/TiO₂ could enhance the photocatalytic ability.     

Preparation and optical properties of ZnO@PPEGMA nanoparticles

The poly(poly(ethylene glycol) methyl ether monomethacrylate) (PPEGMA) grafted zinc oxide (ZnO) nanoparticles were successfully prepared via the surface-initiated atom transfer radical polymerizations (ATRP) from the surfaces functionalized ZnO nanoparticles. The 2-bromoisobutyrate (BIB) was immobilized onto the surface of the ZnO nanoparticles through the reaction between 2-bromoisobutyryl bromide (BIBB) and the hydroxyl groups on nanoparticles, serving as the initiator to induce the ATRP of poly(ethylene glycol) monomethacrylate (PEGMA). Well-defined polymer chains were grown from the surfaces to yield hybrid nanoparticles comprised of ZnO cores and PPEGMA polymer shells having multifunctional end groups. The structure and morphology of the nanoparticles were characterized using Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), X-ray diffraction (XRD) and transmission electron microscopy (TEM). The optical properties of the nanoparticles were investigated by UV-vis absorption spectroscopy and photoluminescence spectroscopy (PL). The results showed that the dispersion and near-band edge (NBE) emission of ZnO nanoparticles could be improved by the grafted PPEGMA polymer segments.