Kinetic modeling of ultrasound-assisted extraction of phenolic compounds from grape marc: Influence of acoustic energy density and temperature

The effects of acoustic energy density (6.8–47.4 W/L) and temperature (20–50 °C) on the extraction yields of total phenolics and tartaric esters during ultrasound-assisted extraction from grape marc were investigated in this study. The ultrasound treatment was performed in a 25-kHz ultrasound bath system and the 50% aqueous ethanol was used as the solvent. The initial extraction rate and final extraction yield increased with the increase of acoustic energy density and temperature. The two site kinetic model was used to simulate the kinetics of extraction process and the diffusion model based on the Fick’s second law was employed to determine the effective diffusion coefficient of phenolics in grape marc. Both models gave satisfactory quality of data fit. The diffusion process was divided into one fast stage and one slow stage and the diffusion coefficients in both stages were calculated. Within the current experimental range, the diffusion coefficients of total phenolics and tartaric esters for both diffusion stages increased with acoustic energy density. Meanwhile, the rise of temperature also resulted in the increase of diffusion coefficients of phenolics except the diffusion coefficient of total phenolics in the fast stage, the value of which being the highest at 40 °C. Moreover, an empirical equation was suggested to correlate the effective diffusion coefficient of phenolics in grape marc with acoustic energy density and temperature. In addition, the performance comparison of ultrasound-assisted extraction and convention methods demonstrates that ultrasound is an effective and promising technology to extract bioactive substances from grape marc.     

Kinetic modeling and optimization of maceration and ultrasound-extraction of resinoid from the aerial parts of white lady’s bedstraw (Galium mollugo L.)

In this paper, extraction of resinoid from the aerial parts of white lady’s bedstraw (Galium mollugo L.) using an aqueous ethanol solution (50% by volume) was studied at different temperatures in the absence and the presence of ultrasound. This study indicated that ultrasound-assisted extraction was effective for extracting the resinoid and gave better resinoid yields at lower extraction temperature and in much shorter time than the maceration. A phenomenological model was developed for modeling the kinetics of the extraction process. The model successfully describes the two-step extraction consisting of washing followed by diffusion of extractable substances and shows that ultrasound influences only the first step. The extraction process was optimized using response surface methodology (RMS) and artificial neural network (ANN) models. For the former modeling, the second-order polynomial equation was applied, while the second one was performed by an ANN-GA combination. The high coefficient of determination and the low MRPD between the ANN prediction and the corresponding experimental data proved that modeling the extraction process in the absence and the presence of ultrasound using ANN was more accurate than RSM modeling. The optimum extraction temperature was determined to be 80 and 40 °C, respectively for the maceration and the ultrasound-assisted extraction, ensuring the highest resinoid yield of 22.0 g/100 g in 4 h and 25.1 g/100 g in 30 min, which agreed with the yields obtained experimentally for the same time (21.7 and 25.3 g/100 g, respectively).     

Optimization of ultrasound-assisted extraction of total monomeric anthocyanin (TMA) and total phenolic content (TPC) from eggplant (Solanum melongena L.) peel

The present study describes the extraction of total monomeric anthocyanin (TMA) and total phenolic content (TPC) from eggplant peel using ultrasonic treatments and methanol and 2-propanol as extraction solvents. The extraction yields were optimized by varying the solvent concentration, ultrasonic frequency, temperature and time of ultrasonic treatment. Box–Behnken design was used to investigate the effect of process variables on the ultrasound-assisted extraction. The results showed that for TPC extraction the optimal condition were obtained with a methanol concentration of 76.6%, 33.88 kHz ultrasonic frequency, a temperature of 69.4 °C and 57.5 min extraction time. For TMA the optimal condition were the following: 54.4% methanol concentration, 37 kHz, 55.1 °C and process time of 44.85 min.     

Development and validation of an efficient ultrasound assisted extraction of phenolic compounds from flax (Linum usitatissimum L.) seeds

Flaxseed accumulates in its seedcoat a macromolecular complex composed of lignan (secoisolariciresinol diglucoside, SDG), flavonol (herbacetin diglucoside, HDG) and hydroxycinnamic acids (p-couramic, caffeic and ferulic acid glucosides). Their antioxidant and/or cancer chemopreventive properties support their interest in human health and therefore, the demand for their extraction. In the present study, ultrasound-assisted extraction (UAE) of flaxseed phenolic compounds was investigated. Scanning Electron Microscopy imaging and histochemical analysis revealed the deep alteration of the seedcoat ultrastructure and the release of the mucilage following ultrasound treatment. Therefore, this method was found to be very efficient for the reduction of mucilage entrapment of flaxseed phenolics. The optimal conditions for UAE phenolic compounds extraction from flaxseeds were found to be: water as solvent supplemented with 0.2 N of sodium hydroxide for alkaline hydrolysis of the SDG–HMG complex, an extraction time of 60 min at a temperature of 25 °C and an ultrasound frequency of 30 kHz. Under these optimized and validated conditions, highest yields of SDG, HDG and hydroxycinnamic acid glucosides were detected in comparison to other published methods. Therefore, the procedure presented herein is a valuable method for efficient extraction and quantification of the main flaxseed phenolics. Moreover, this UAE is of particular interest within the context of green chemistry in terms of reducing energy consumption and valuation of flaxseed cakes as by-products resulting from the production of flax oil.     

Bio-refinery of orange peels waste: A new concept based on integrated green and solvent free extraction processes using ultrasound and microwave techniques to obtain essential oil,polyphenols and pectin

In this study, extraction of essential oil, polyphenols and pectin from orange peel has been optimized using microwave and ultrasound technology without adding any solvent but only “in situ” water which was recycled and used as solvent. The essential oil extraction performed by Microwave Hydrodiffusion and Gravity (MHG) was optimized and compared to steam distillation extraction (SD). No significant changes in yield were noticed: 4.22 ± 0.03% and 4.16 ± 0.05% for MHG and SD, respectively. After extraction of essential oil, residual water of plant obtained after MHG extraction was used as solvent for polyphenols and pectin extraction from MHG residues. Polyphenols extraction was performed by ultrasound-assisted extraction (UAE) and conventional extraction (CE). Response surface methodology (RSM) using central composite designs (CCD) approach was launched to investigate the influence of process variables on the ultrasound-assisted extraction (UAE). The statistical analysis revealed that the optimized conditions of ultrasound power and temperature were 0.956 W/cm² and 59.83 °C giving a polyphenol yield of 50.02 mg GA/100 g dm. Compared with the conventional extraction (CE), the UAE gave an increase of 30% in TPC yield. Pectin was extracted by conventional and microwave assisted extraction. This technique gives a maximal yield of 24.2% for microwave power of 500 W in only 3 min whereas conventional extraction gives 18.32% in 120 min. Combination of microwave, ultrasound and the recycled “in situ” water of citrus peels allow us to obtain high added values compounds in shorter time and managed to make a closed loop using only natural resources provided by the plant which makes the whole process intensified in term of time and energy saving, cleanliness and reduced waste water.     

Ultrasound-assisted extraction of d-pinitol from carob pods using Response Surface Methodology

This study reports on the optimization of the conditions of extraction of d-pinitol compound from carob pods by using ultrasonication. For this purpose, the Box–Behnken design, which is a widely used form of Response Surface Methodology, was used to investigate the effects of parameters on the ultrasound-assisted extraction. Four independent variables, temperature (°C), ultrasonic power (W), dilution rate (material:water ratio) and time (min), were studied. The results showed that the highest d-pinitol concentration of 11.98 g/L was obtained with an extraction temperature of 50 °C, ultrasonic power of 207 W, a dilution rate of 1:4 and an extraction time of 120 min. It was found that the d-pinitol concentration of carob extract increased with the effect of ultrasonication during the extraction process. Therefore, ultrasound-assisted extraction could be used as an alternative to conventional hot water extraction with respect to the recovery of d-pinitol from carob pods with the advantages of lower extraction temperatures, shorter extraction time and reduced energy consumption.     

Effect of acoustic frequency and power density on the aqueous ultrasonic-assisted extraction of grape pomace (Vitis vinifera L.) – A response surface approach

Aqueous ultrasound-assisted extraction (UAE) of grape pomace was investigated by Response Surface Methodology (RSM) to evaluate the effect of acoustic frequency (40, 80, 120 kHz), ultrasonic power density (50, 100, 150 W/L) and extraction time (5, 15, 25 min) on total phenolics, total flavonols and antioxidant capacity. All the process variables showed a significant effect on the aqueous UAE of grape pomace (p < 0.05). The Box–Behnken Design (BBD) generated satisfactory mathematical models which accurately explain the behavior of the system; allowing to predict both the extraction yield of phenolic and flavonol compounds, and also the antioxidant capacity of the grape pomace extracts. The optimal UAE conditions for all response factors were a frequency of 40 kHz, a power density of 150 W/L and 25 min of extraction time. Under these conditions, the aqueous UAE would achieve a maximum of 32.31 mg GA/100 g fw for total phenolics and 2.04 mg quercetin/100 g fw for total flavonols. Regarding the antioxidant capacity, the maximum predicted values were 53.47 and 43.66 mg Trolox/100 g fw for CUPRAC and FRAP assays, respectively. When comparing with organic UAE, in the present research, from 12% to 38% of total phenolic bibliographic values were obtained, but using only water as the extraction solvent, and applying lower temperatures and shorter extraction times. To the best of the authors’ knowledge, no studies specifically addressing the optimization of both acoustic frequency and power density during aqueous-UAE of plant materials have been previously published.     

Thermosonication as a potential quality enhancement technique of apple juice

Enzymatic browning and microbial growth lead to quality losses in apple products. In the present study, fresh apple juice was thermosonicated using ultrasound in-bath (25 kHz, 30 min, 0.06 W cm⁻³) and ultrasound with-probe sonicator (20 kHz, 5 and 10 min, 0.30 W cm⁻³) at 20, 40 and 60 °C for inactivation of enzymes (polyphenolase, peroxidase and pectinmethylesterase) and microflora (total plate count, yeast and mold). Additionally, ascorbic acid, total phenolics, flavonoids, flavonols, pH, titratable acidity, ^°Brix and color values influenced by thermosonication were investigated. The highest inactivation of enzymes was obtained in ultrasound with-probe at 60 °C for 10 min, and the microbial population was completely inactivated at 60 °C. The retention of ascorbic acid, total phenolics, flavonoids and flavonols were significantly higher in ultrasound with-probe than ultrasound in-bath at 60 °C. These results indicated the usefulness of thermosonication for apple juice processing at low temperature, for enhanced inactivation of enzymes and microorganisms.     

Effect of ultrasonic treatment on the polyphenol content and antioxidant capacity of extract from defatted hemp,flax and canola seed cakes

The effectiveness of ultrasonic extraction of phenolics and flavonoids from defatted hemp, flax and canola seed cakes was compared to the conventional extraction method. Ultrasonic treatment at room temperature showed increased polyphenol extraction yield and antioxidant capacity by two-fold over the conventional extraction method. Different combinations of ultrasonic treatment parameters consisting of solvent volume (25, 50, 75 and 100 mL), extraction time (20, 30 and 40 min) and temperature (40, 50, 60 and 70 °C) were selected for polyphenol extractions from the seed cakes. The chosen parameters had a significant effect (p < 0.05) on the polyphenol extraction yield and subsequent antioxidant capacity from the seed cakes. Application of heat during ultrasonic extraction yielded higher polyphenol content in extracts compared to the non-heated extraction. From an orthogonal design test, the best combination of parameters was 50 mL of solvent volume, 20 min of extraction time and 70 °C of ultrasonic temperature.     

Optimization of ultrasonic cell grinder extraction of anthocyanins from blueberry using response surface methodology

Ultrasonic cell grinder extraction (UCGE), using water as the solvent, was firstly applied to extract anthocyanins from blueberry. Extraction yield was related with four variables, including ratio of solution to solid, extraction power, buffer time, and extraction time. On the basis of response surface methodology (RSM), the optimal conditions were determined to be the ratio of solution to solid as 25:1 (mL/g), the extraction power as 1500 W, the buffer time as 3.0 s, and the extraction time as 40 min. The experimental yield of anthocyanins using UCGE was 2.89 mg/g higher than that of conventional ultrasound-assisted extraction (CUAE). This study indicated that UCGE was an innovative, efficient, and environment friendly method in ultrasonic extraction fields, and had a potential to effectively extract other bioactive constituents.     

Green ultrasound-assisted extraction of carotenoids from pomegranate wastes using vegetable oils

The objective of this work was to develop a new process for pomegranate peels application in food industries based on ultrasound-assisted extraction of carotenoids using different vegetable oils as solvents. In this way, an oil enriched with antioxidants is produced. Sunflower oil and soy oil were used as alternative solvents and the effects of various parameters on extraction yield were studied. Extraction temperature, solid/oil ratio, amplitude level, and extraction time were the factors investigated with respect to extraction yield. Comparative studies between ultrasound-assisted and conventional solvent extraction were carried out in terms of processing procedure and total carotenoids content. The efficient extraction period for achieving maximum yield of pomegranate peel carotenoids was about 30 min. The optimum operating conditions were found to be: extraction temperature, 51.5 °C; peels/solvent ratio, 0.10; amplitude level, 58.8%; solvent, sunflower oil. A second-order kinetic model was successfully developed for describing the mechanism of ultrasound extraction under different processing parameters.     

Green ultrasound-assisted extraction of carotenoids based on the bio-refinery concept using sunflower oil as an alternative solvent

A green, inexpensive and easy-to-use method for carotenoids extraction from fresh carrots assisted by ultrasound was designed in this work. Sunflower oil was applied as a substitute to organic solvents in this green ultrasound-assisted extraction (UAE): a process which is in line with green extraction and bio-refinery concepts. The processing procedure of this original UAE was first compared with conventional solvent extraction (CSE) using hexane as solvent. Moreover, the UAE optimal conditions for the subsequent comparison were optimized using response surface methodology (RSM) and ultra performance liquid chromatography – diode array detector – mass spectroscopy (UPLC–DAD–MS). The results showed that the UAE using sunflower as solvent has obtained its highest β-carotene yield (334.75 mg/l) in 20 min only, while CSE using hexane as solvent obtained a similar yield (321.35 mg/l) in 60 min. The green UAE performed under optimal extraction conditions (carrot to oil ratio of 2:10, ultrasonic intensity of 22.5 W cm^?2, temperature of 40 °C and sonication time of 20 min) gave the best yield of β-carotene.     

Ultrasound-assisted extraction of polysaccharides from Rhododendron aganniphum: Antioxidant activity and rheological properties

In this study, we aimed to optimize the extraction of polysaccharides from the leaves of Rhododendron aganniphum and investigate its rheological properties and antioxidant activity. After optimizing the operating parameters using a Box-Behnken design (BBD), the results showed that the optimal ultrasound-assisted extraction conditions were as follows: extraction temperature, 55 °C; liquid-solid ratio, 25:1; extraction time, 2.2 h; and ultrasound treatment power, 200 W. The optimized experimental yield of polysaccharides by ultrasound-assisted extraction (PUAE) was 9.428%, higher than that obtained by hot water extraction (PHWE) for 12 h at the same liquid-solid ratio and extraction temperature. In the in vitro antioxidant activity tests, PUAE had higher positive radical scavenging activity for hydroxyl, superoxide and 1,1-diphenyl-2-picrylhydrazyl (DPPH) radicals than PHWE. However, PUAE and PHWE solutions had similar intermolecular interactions in the steady-shear flow and dynamic viscoelasticity tests, resulting in similar macroscopic behaviour. With respect to the apparent viscosity, storage modulus (G′) and loss modulus (G″) of PUAE were lower at the same shear rate or angular frequency. All PUAE solutions exhibited non-Newtonian shear-thinning pseudoplastic behaviour that was accurately described by the Carreau model but was better fit by the power-law model at high shear rates (≥1/s), which demonstrated that the variation in the apparent viscosity dependence was greater at higher concentrations and shear rates. The G′ and G″ of the solutions increased as the experimental frequency increased from 0.05 to 500 rad/s under all experimental concentrations, and the modulus crossover point decreased gradually with increasing PUAE concentration. The above results demonstrated that the ultrasound-assisted extraction methods gave a higher yield of polysaccharides from the leaves of R. aganniphum with a shorter extraction time than the hot water extraction method, which could affect the apparent viscosity and dynamic viscoelasticity. PUAE presented good radical scavenging activity for DPPH, superoxide and hydroxyl radicals in vitro and could be used as a natural antioxidant in the food and medical industries.     

Ultrasound induced green solvent extraction of oil from oleaginous seeds

Ultrasound-assisted extraction of rapeseed oil was investigated and compared with conventional extraction for energy efficiency, throughput time, extraction yield, cleanness, processing cost and product quality. A multivariate study enabled us to define optimal parameters (7.7 W/cm² for ultrasonic power intensity, 40 °C for processing temperature, and a solid/liquid ratio of 1/15) for ultrasound-assisted extraction of oil from oilseeds to maximize lipid yield while reducing solvent consumption and extraction time using response surface methodology (RSM) with a three-variable central composite design (CCD). A significant difference in oil quality was noted under the conditions of the initial ultrasound extraction, which was later avoided using ultrasound in the absence of oxygen. Three concepts of multistage cross-current extraction were investigated and compared: conventional multistage maceration, ultrasound-assisted maceration and a combination, to assess the positive impact of using ultrasound on the seed oil extraction process. The study concludes that ultrasound-assisted extraction of oil is likely to reduce both economic and ecological impacts of the process in the fat and oil industry.     

Ultrasound-assisted extraction of rare-earth elements from carbonatite rocks

In view of the increasing demand for rare-earth elements (REE) in many areas of high technology, alternative methods for the extraction of these elements have been developed. In this work, a process based on the use of ultrasound for the extraction of REE from carbonatite (an igneous rock) is proposed to avoid the use of concentrated reagents, high temperature and excessive extraction time. In this pioneer work for REE extraction from carbonatite rocks in a preliminary investigation, ultrasonic baths, cup horn systems or ultrasound probes operating at different frequencies and power were evaluated. In addition, the power released to the extraction medium and the ultrasound amplitude were also investigated and the temperature and carbonatite mass/volume of extraction solution ratio were optimized to 70 °C and 20 mg/mL, respectively. Better extraction efficiencies (82%) were obtained employing an ultrasound probe operating at 20 kHz for 15 min, ultrasound amplitude of 40% (692 W dm⁻³) and using a diluted extraction solution (3% v/v HNO₃ + 2% v/v HCl). It is important to mention that high extraction efficiency was obtained even using a diluted acid mixture and relatively low temperature in comparison to conventional extraction methods for REE. A comparison of results with those obtained by mechanical stirring (500 rpm) using the same conditions (time, temperature and extraction solution) was carried out, showing that the use of ultrasound increased the extraction efficiency up to 35%. Therefore, the proposed ultrasound-assisted procedure can be considered as a suitable alternative for high efficiency extraction of REE from carbonatite rocks.     

Effects of various factors of ultrasonic treatment on the extraction recovery of drugs from fish tissues

In the present research, a combined extraction method of ultrasound-assisted extraction (UAE) in conjunction with solid phase extraction (SPE) was applied to isolation and enrichment of selected drugs (metoprolol, ticlopidine, propranolol, carbamazepine, naproxen, acenocumarol, diclofenac, ibuprofen) from fish tissues. The extracted analytes were separated and determined by ultra-high performance liquid chromatography with UV detection (UHPLC–UV) technique. The selectivity of the developed UHPLC–UV method was confirmed by comparison with ultra-high performance liquid chromatography–tandem mass spectrometry (UHPLC–MS/MS) analysis.The important parameters, such as composition of type and pH of extraction solvent, solid/liquid rate volume of extraction solvent and number of extraction cycles were studied. The ultrasonic parameters, such as time, power and temperature of the process were optimized by using a half-fraction factorial central composite design (CCD). The mixture of 10 mL of methanol and 7 mL of water (pH 2.2) (three times) was chosen for the extraction of selected drug from fish tissues. The results showed that the highest recoveries of analytes were obtained with an extraction temperature of 40 °C, ultrasonic power of 300 W, extraction time of 30 min.Under the optimal conditions, the linearity of method was 0.12–5.00 μg/g. The determination coefficients (R²) were from 0.979 to 0.998. The limits of detection (LODs) and limits of quantification (LOQs) for the extracted compounds were 0.04–0.17 μg/g and 0.12–0.50 μg/g, respectively. The recoveries were between 85.5% and 115.8%.     

Impact of ultrasound on solid–liquid extraction of phenolic compounds from maritime pine sawdust waste. Kinetics,optimization and large scale experiments

Maritime pine sawdust, a by-product from industry of wood transformation, has been investigated as a potential source of polyphenols which were extracted by ultrasound-assisted maceration (UAM). UAM was optimized for enhancing extraction efficiency of polyphenols and reducing time-consuming. In a first time, a preliminary study was carried out to optimize the solid/liquid ratio (6 g of dry material per mL) and the particle size (0.26 cm²) by conventional maceration (CVM). Under these conditions, the optimum conditions for polyphenols extraction by UAM, obtained by response surface methodology, were 0.67 W/cm² for the ultrasonic intensity (UI), 40 °C for the processing temperature (T) and 43 min for the sonication time (t). UAM was compared with CVM, the results showed that the quantity of polyphenols was improved by 40% (342.4 and 233.5 mg of catechin equivalent per 100 g of dry basis, respectively for UAM and CVM). A multistage cross-current extraction procedure allowed evaluating the real impact of UAM on the solid–liquid extraction enhancement. The potential industrialization of this procedure was implemented through a transition from a lab sonicated reactor (3 L) to a large scale one with 30 L volume.     

A novel enzyme-assisted ultrasonic approach for highly efficient extraction of resveratrol from Polygonum cuspidatum

Resveratrol is a promising multi-biofunctional phytochemical, which is abundant in Polygonum cuspidatum. Several methods for resveratrol extraction have been reported, while they often take a long extraction time accompanying with poor extraction yield. In this study, a novel enzyme-assisted ultrasonic approach for highly efficient extraction of resveratrol from P. cuspidatum was developed. According to results, the resveratrol yield significantly increased after glycosidases (Pectinex® or Viscozyme®) were applied in the process of extraction, and better extraction efficacy was found in the Pectinex®-assisted extraction compared to Viscozyme®-assisted extraction. Following, a 5-level-4-factor central composite rotatable design with response surface methodology (RSM) and artificial neural network (ANN) was selected to model and optimize the Pectinex®-assisted ultrasonic extraction. Based on the coefficient of determination (R²) calculated from the design data, ANN model displayed much more accurate in data fitting as compared to RSM model. The optimum conditions for the extraction determined by ANN model were substrate concentration of 5%, acoustic power of 150 W, pH of 5.4, temperature of 55 °C, the ratio of enzyme to substrate of 3950 polygalacturonase units (PGNU)/g of P. cuspidatum, and reaction time of 5 h, which can lead to a significantly high resveratrol yield of 11.88 mg/g.     

Effect of ultrasound-assisted freezing on the physico-chemical properties and volatile compounds of red radish

Power ultrasound, which can enhance nucleation rate and crystal growth rate, can also affect the physico-chemical properties of immersion frozen products. In this study, the influence of slow freezing (SF), immersion freezing (IF) and ultrasound-assisted freezing (UAF) on physico-chemical properties and volatile compounds of red radish was investigated. Results showed that ultrasound application significantly improved the freezing rate; the freezing time of ultrasound application at 0.26 W/cm² was shorten by 14% and 90%, compared to IF and SF, respectively. UAF products showed significant (p < 0.05) reduction in drip loss and phytonutrients (anthocyanins, vitamin C and phenolics) loss. Compared to SF products, IF and UAF products showed better textural preservation and higher calcium content. The radish tissues exhibited better cellular structures under ultrasonic power intensities of 0.17 and 0.26 W/cm² with less cell separation and disruption. Volatile compound data revealed that radish aromatic profile was also affected in the freezing process.     

Phytochemicals in Capsicum oleoresin from different varieties of hot chilli peppers with their antidiabetic and antioxidant activities due to some phenolic compounds

Due to its wide use in nutritional therapy, a capsicum oleoresin extraction from hot chilli pepper was optimized using ultrasound assisted extraction. Under optimal conditions, a 0.1 g sample in 10 mL of a 20% water in methanol solution was extracted at 50 °C for 20 min to remove phytochemicals consisting of oleoresin, phenolics, carotenoids, flavonoids, capsaicinoids (pungency level), reducing sugars. Antioxidant and antidiabetic activities of the crude extracts from 14 chilli pepper varieties were examined. The antioxidant and antidiabetic activities of some phenolic compounds were also tested individually. The results showed that these chilli pepper samples are a rich source of phytochemicals with antioxidant and antidiabetic activities. High antioxidant activity of the extracts was evaluated using the 2,2-diphenyl-1-picrylhydrazyl, N,N-dimethyl-p-phenylenediamine dihydrochloride, 2,2′-azino-bis(3-ethylbenzothiazolin-6-sulfonic acid) and ferric ion reducing antioxidant power assays. The crude extracts had a lower level of sugars induced by the inhibitory effect of α-amylase activity. Thus, their enzymatic inhibitory effect might have resulted from a synergism among the phytochemicals concerned. Therefore, a diet with this type of food may have beneficial health effects.