Effect of ionic strength on the formal potential of the glass electrode in various saline media

We examined the variation with ionic strength (I, adjusted with KCl, KNO₃, KBr, NaCl or NaClO₄) of the formal potential (E_const) for glass electrodes exhibiting a Nernstian response (i.e. E_cell=E_const−s log [H⁺]). For this purpose, we investigated the different factors included in the formal potential, so we obtained reported values for the liquid junction potential as a function of ionic strength and determined the logarithm of the activity coefficient for the proton in various saline media, using Pitzer equations.     

Holographic sensors for the determination of ionic strength

Holographic sensors for monitoring ionic strength have been fabricated from charged sulphonate and quaternary ammonium monomers, incorporated into thin, polymeric hydrogel films which were transformed into volume holograms. The diffraction wavelength or reflected colour of the holograms was used to characterise their swelling or de-swelling behaviour as a function of ionic strength in various media. The effects of co-monomer structure, buffer composition, ion composition, pH and temperature were evaluated, whilst the reversibility and reproducibility of the sensor was also assessed. An acrylamide-based hologram containing equal molar amounts of negatively and positively charged monomers was shown to be able to quantify ionic strength independent of the identity of the ionic species present in the test solution. The sensor was fully reversible, free of hysteresis and exhibited little response to pH between 3 and 9 and temperature within the range 20-45 °C. The system was successfully used to quantify the ionic strength of milk solutions, which contain a complex mixture of ions and biological components.     

离子液体双水相萃取分离苋菜红的研究

建立了由亲水性离子液体四氟硼酸1-丁基-3-甲基咪唑([Bmim]BF4)和NaH2PO4形成的双水相体系萃取分离苋菜红的新方法.研究了盐的浓度、离子液体浓度、溶液酸度、其它共存物质对苋菜红萃取率的影响.结果表明,NaH2PO4加入量在2～2.5 g,离子液量在1.0～2.0 mL,苋菜红溶液量在1.5 mL,溶液酸度在pH 4～6范围,离子液体双水相体系对苋菜红有较高的萃取率(E%＞90).用加入无机离子、不同类型表面活性剂和吸收光谱探讨了离子液体与苋菜红之间的作用.     

Ionic liquid as a complexation and extraction medium combined with high-performance liquid chromatography in the evaluation of chromium(VI) and chromium(III) speciation in wastewater samples

A simple method has been proposed for the determination of chromium species by high-performance liquid chromatography (HPLC) after preconcentration by the ionic liquid, 1-butyl-3-methyimidazolium hexafluorophosphate ([C₄MIM][PF₆]). The simultaneous preconcentration of Cr(VI) and Cr(III) in wastewater was achieved with ammonium pyrrolidinedithiocarbamate (APDC) as the chelating agent and the ionic liquid [C₄MIM][PF₆] as the extractant. Baseline separation of the APDC chelates of Cr(III) and Cr(VI) was realised on a RP-C18 column using a mixture of methanol–acetonitrile–water (53:14:33, v/v) as the mobile phase at a flow rate of 1.0 mL min^{− 1}. The influences of several variables on the complexation and extraction were evaluated: pH, reaction time, APDC concentration and metal ion interference. Our results showed that when the linear concentration of Cr(VI) and Cr(III) ranged from 25 to 200 μg L^{− 1}, their linear correlation coefficients were between 0.9977 and 0.9978, their recoveries ranged from 91.8% to 95.8% and their relative standard deviations (n = 3) were between 0.31% and 1.8%. Common metal ions in water did not interfere with the determination. This method is a simple, fast, accurate, highly stable and selective method and has successfully been applied to the speciation of chromium in wastewater.     

Solution ionic strength effect on gold nanoparticle solution color transition

Unmodified and modified gold nanoparticles are proposed as sensors using the red to blue transition as an indicator. This work indicates that ionic content is an important variable to track in analytical samples and during the sensor fabrication processes. Mono and multivalent salts where the titrants for a standard gold nanoparticle solution. Multivalent cation salt titrants exhibited a greater sensitivity to color change than monovalent cation salts. The data suggest that specific surface adsorption is the predominant mechanism for the red to blue color change not aggregation. The 3-7 nm Debye length for divalent cations versus the 0.5-1.5 nm for monovalent cations indicates surface electrodynamic resonance effects are an important factor in the observed color changes.     

Ultrasonication-assisted extraction and preconcentration of medicinal products from herb by ionic liquids

Ionic liquid-based extraction of medicinal or useful compounds from plants was investigated as an alternative to supercritical fluid, cloud point and conventional organic solvent extractions. The method integrated extraction and preconcentration. Medicinal products were first extracted by an ionic liquid solution, part of which was then converted to a hydrophobic form by anion metathesis for preconcentration. The remaining soluble ionic liquid acted as a dispersive agent to enhance the efficiency of preconcentration. Protein in the extract was precipitated spontaneously without addition of further solvents. Ultrasonication assisted this method for extraction and preconcentration of cryptotanshinone, tanshinone I and tanshinone II A from Salvia Miltiorrhiza Bunge. 0.233 mg g⁻¹, 0.695 mg g⁻¹ and 0.682 mg g⁻¹ of each, respectively, were extracted using [OMIM][Cl], and preconcentrated in a [OMIM][PF₆] phase at respective concentrations of 148.1, 507.1 and 486.1 μg mL⁻¹. The method exhibited potential applicability with other medicinal products.     

Effect of ionic strength and ionic interactions on the oxidation of Fe(II)

The rates of oxidation of Fe(II) in NaCl and NaClO ₄ solutions were studied as a function of pH (6 to 9), temperature (5 to 25°C), and ionic strength (0 to 6m). The rates are second order with respect to [H⁺] or [OH^–] and independent of ionic strength and temperature. The overall rate of the oxidation is given by

Selective extraction/isolation of hemoglobin with ionic liquid 1-butyl-3-trimethylsilylimidazolium hexafluorophosphate (BtmsimPF6)

Ionic liquid was for the first time employed for selective isolation of heme-protein species. Direct extraction of hemoglobin into ionic liquid without using any concomitant reagent or extractant was carried out. Hemoglobin at the level of 100 ng μL⁻¹ could readily be quantitatively extracted into ionic liquid (IL) 1-butyl-3-trimethylsilylimidazolium hexafluorophosphate (BtmsimPF₆) in the absence of any co-existing extractants/additives at pH 7, at the same time; however, the other protein species do not interfere and remain in the aqueous phase. A back extraction efficiency of ca. 80% for 20 ng μL⁻¹ hemoglobin in ionic liquid phase was achieved with sodium dodecyl sulfate (SDS) solution as stripping reagent. ⁵⁷Fe Mossbauer spectra and circular dichroism (CD) spectra indicated that the penta-coordinated ferrous atom in hemoglobin provide a vacant or free coordinating position, which could be occupied by the cationic Btmsim⁺ moiety. The interaction/coordination reaction between the iron atom in the heme group of hemoglobin and the cationic ionic liquid moiety furnishes the driving force for facilitating fast transfer of hemoglobin into BtmsimPF₆. The present system was applied for selective isolation of heme-protein, i.e., hemoglobin from human whole blood without any pretreatment, giving rise to satisfactory results.     

Effect of ionic strength and protein concentration on the transport of proteins through chitosan/polystyrene sulfonate multilayer membrane

The influence of ionic strength and protein concentration on the transport of bovine serum albumin (BSA), ovalbumin and lysozyme through chitosan (CHI)/polystyrenesulfonate (PSS) multilayers on polyether sulfone supports are investigated under ultrafiltration conditions. The percentage transmission and flux of BSA, ovalbumin and lysozyme were found to increase with increase in salt concentration in the protein. The percentage transmission of BSA through 9 bilayer membrane was found to increase from 5.3 to 115.6 when the salt concentration was varied from 0 to 1 M. It was observed that 0.1 M NaCl in BSA solution is capable of permeating all the BSA. When the salt concentration in BSA was further increased, a negative solute rejection (solute enrichment in permeate) was found to take place. With 9 bilayer membrane, the percentage transmission of ovalbumin was found to increase from 23.3 to 125.8 when the salt concentration in protein was increased from 0 to 0.05 M. The effect of protein concentration on protein transport is studied taking BSA as a model protein. BSA was rejected by the multilayer membrane at all the studied concentrations (0.25, 0.5, 1 and 2 mg/ml). With increase in feed concentration, maximum rejection of protein occurred at higher number of CHI/PSS bilayers. BSA solution flux was found to decrease with an increase in BSA concentration. This study indicates that it is possible to fine tune the transport properties of proteins through multilayer membranes by varying the concentration and ionic strength of protein solutions.     

Effect of the ionic strength of the solution and the nature of its ions on the adsorption mechanism of ionic species in RPLC III. Equilibrium isotherms and overloaded band profiles on Kromasil-C18

In two companion papers, we have described the influence of the concentration and the nature of completely dissociated salts dissolved in the mobile phase (methanol:water, 40:60, v/v) on the adsorption behavior of propranolol (R'-NH2+-R, Cl-) on XTerra-C18 and on Symmetry-C18. The same experiments were repeated on a Kromasil-C18 column to compare the adsorption behavior of this ionic compound on these three different RPLC systems. The adsorption data of propranolol hydrochloride were first measured by frontal analysis (FA) using a mobile phase without salt. These data fit best to the Bi-Moreau model. Large concentration band profiles of propranolol were recorded with mobile phases containing increasing KCl concentrations (0, 0.002, 0.005, 0.01, 0.05, 0.1 and 0.2 M) and the best values of the isotherm coefficients were determined using the numerical solution of the inverse problem of chromatography. The general effect of a dissociated salt in the mobile phase was the same as the one observed earlier with XTerra-C18 and Symmetry-C18. However, obvious differences were observed for the shape of the band profiles recorded at low column loading (1.5 g/L, 250 microL injected). A long shoulder is visible at all salt concentrations and the band broadening is maximum at low salt concentrations. A slow mass transfer kinetics on the high-energy sites of the bi-Moreau model might explain this original shape. Five other salts (NaCl, CsCl, KNO3, CaCl2 and Na2SO4) were also used at the same ionic strength (J = 0.2 M). As many different band profiles were observed, suggesting that specific solute-salt interactions take place in the adsorbed phase.     

N-butylpyridinium bis-(trifluoromethylsulfonyl)imide ionic liquids as solvents for the liquid-liquid extraction of aromatics from their mixtures with alkanes: Isomeric effect of the cation

The liquid-liquid equilibria (LLE) of four ternary systems comprising toluene, heptane, and an ionic liquid with the cation N-butylpyridinium ([bpy]), or 2-methyl-N-butylpyridinium ([2bmpy]), or 3-methyl-N-butylpyridinium ([3bmpy]), or 4-methyl-N-butylpyridinium ([4bmpy]), and the anion bis-(trifluoromethylsulfonyl)imide ([Tf₂N]) were determined at 313.2 K and atmospheric pressure. The distribution ratios and the separation factor curves from the LLE data were plotted and compared to those for sulfolane. The results show no significant differences in the values of these parameters between [bpy][Tf₂N] and [2bmpy][Tf₂N], and between [3bmpy][Tf₂N] and [4bmpy][Tf₂N]. The experimental LLE data were satisfactorily correlated by means of the thermodynamic NRTL model.     

Determination and comparison of stability constants of tungsten(VI) and molybdenum(VI) with nitrilotriacetic acid and glutamic acid at different ionic strengths

The formation constants of species formed in the systems H⁺?+?W(VI)?+?nitrilotriacetic acid (NTA) and H⁺?+?NTA have been determined in aqueous solution for pH?=?4–9 at 25°C and different ionic strengths ranging from 0.1 to 1.0?mol?dm^?3 NaClO₄, using potentiometric and spectrophotometric techniques. It was shown that tungsten(VI) forms a mononuclear 1?:?1 complex with NTA of the type WO₃L^3? at pH?=?7.5. The composition of the complex was determined by the continuous variations method. The complexation of molybdenum(VI) with glutamic acid was investigated in aqueous solution ranging in pH from 4 to 9, using polarimetric, potentiometric and spectrophotometric techniques. The composition of the complex was determined by the continuous variations method. It was shown that molybdenum(VI) forms a mononuclear 1?:?1 complex with glutamic acid of the type MoO₃L^2? at pH?=?6.0. The dissociation constants of glutamic acid and the stability constants of the complex were determined at 25°C and at ionic strengths ranging from 0.1 to 1.0?mol?dm^?3 sodium perchlorate. In both complex formation reactions the dependence of the dissociation and stability constants on ionic strength is described by a Debye-Huckel type equation. Finally, a comparison has been made between the patterns of ionic strength dependence for the two complexes and the results have been compared with data previously reported.     

Quaternary (liquid + liquid) equilibrium data for the extraction of toluene from alkanes using the ionic liquid [EMim][MSO4]

(Liquid + liquid) equilibrium (LLE) studies for the extraction of aromatics from alkanes present in the petroleum fractions are important to develop theoretical/semiempirical (liquid + liquid) equilibrium models, which are used in the design of extraction processes. In this work, the ionic liquid 1-ethyl-3-methylimidazolium methylsulfate, [EMim][MSO₄], was evaluated as potential solvent for the separation of toluene from heptane and cyclohexane. The LLE data for the quaternary system {heptane (1) + cyclohexane (2) + toluene (3) + [EMim][MSO₄] (4)} were experimentally determined at T = 298.15 K and atmospheric pressure. Moreover, the LLE data for the ternary systems {heptane or cyclohexane (1) + toluene (2) + [EMim][MSO₄] (3)} were also determined. Solute distribution ratios and selectivities were calculated and analysed in order to evaluate the capability of the ionic liquid to accomplish the separation target. A comparison between the solute distribution ratios and selectivities for the quaternary and the ternary systems was also made. Finally, the experimental tie-line data were correlated with the NRTL model.     

Liquid-liquid extraction of molybdenum(VI) and uranium(VI) by LIX 622

The order of extraction of Mo(VI) from 1M acid solutions by 5% (v/v) LIX 622 (HL) in benzene is HCl>HNO₃>HClO₄>H₂SO₄, and extraction decreases with increasing concentration of HCl and H₂SO₄, and increases slightly with increasing concentration of HNO₃ and HClO₄. The extracted species is shown to be MoO₂L₂ as established by IR data of organic extracts and the extracted species in the solid form. Extraction is almost quantitative at and above 10% LIX 622, and is found to be independent of [Mo(VI)] in the range of 10^–4 to 10^–3 M. The diluents CCl₄, CHCl₃ and C₆H₆ are found to be superior to solvents of high dielectric constant for extraction of Mo(VI). Extraction of uranium(VI) by 10% (v/v) LIX 622 in benzene was found to increase with increasing equilibrium pH (3.0 to 6.0), and becomes quantitative at pH 5.9. Tributyl phosphate acts as a modifier up to 2% (v/v). Thorium(IV) is almost not extracted by LIX 622 or its mixture. Separation of Mo(VI) and U(VI) is feasible.     

Elaboration of poly(ethyleneimine) coated poly( , -lactic acid) particles. Effect of ionic strength on the surface properties and DNA binding capabilities

Poly( , -lactic acid) (PLA)-based particles, obtained by the emulsification–diffusion process, were surface-modified by electrostatic adsorption of poly(ethylenimine) (PEI). The amount of immobilized PEI and the conformation of the polycation at the interface were dependent on the ionic strength of the media. In the absence of salt, or at low ionic strength, the adsorbed amounts of PEI, the surface charge and the critical concentration for coagulation (CCC) of the modified particles were lower than when the adsorption was achieved at elevated ionic strength. Moreover, at low salt concentration, isotherms were of Langmuir type, suggesting the formation of monolayers. The differences in PEI surface conformation had consequences on the DNA binding capacity of the particles, on the plasmid DNA conformation at the interface and on the DNA release in various media. When PEI was adsorbed in a 50 mM phosphate buffer, the amount of bound plasmid and the strength of binding were higher than when PEI was adsorbed in water. From these differences in physico-chemical properties, one can expect differences in transfection or immunization performances of the vectors.     

Efficient separation and recovery of V(V) from Cr(VI) in aqueous solution using new task-specific ionic liquid of [C12H25NH3][Cyanex 272]

An environmentally friendly process for efficient separation and recovery of V(V) from aqueous solution containing Cr(VI) was proposed using the new task-specific ionic liquid of [C₁₂H₂₅NH₃][Cyanex 272]. The separation factor of V(V) from Cr(VI) was about 1.08 × 10³ with the optimum extraction conditions, and the extraction percentage of V(V) was about 99.5 %. The loaded organic phase was stripped using the NH₃·H₂O, and the recovered NH₄VO₃ was obtained with the processes of stripping, filtration, washing, and desiccation. The qualitative analysis of the recovered NH₄VO₃ was made using the X-ray diffraction, and its peaks were good consistent with the standard sample. Morphology of the recovered NH₄VO₃ was also studied using the scanning electron microscope. The extraction mechanism of V(V) using the [C₁₂H₂₅NH₃][Cyanex 272] was investigated using the slope method and infrared spectrum analysis. This new environmentally friendly process can be used for the separation and recovery of V(V) from real leaching solution with the aim of industrial application.