Investigation of the dyeing properties of cotton fabrics and wool yarns using Prunus persica leaf extract

In this study, the dyeing properties of cellulose fabric and wool yarn were investigated using Prunus persica (Peach) leaf extracts. For this concept, the cotton fabrics and wool yarns were subjected to pre–, meta– and post– mordanting processes in the presence of FeSO₄, CuSO₄ and AlK(SO₄)₂ mordants. The studies were carried out using medium pH. Color analyses of the dyed samples were done and the results were evaluated in terms of wash, rubbing and light fastness values. The color codes were determined with Pantone Color Quide, and K/S and L1 a1 b1 values were detected with color measurement spectrophotometer, and also washing–, crocking– fastness levels were evaluated using gray scale. As a result, it was detected that wool yarns exhibited better dyeing potential than cotton fabrics and highest color strength values were obtained using pre–mordanting method. For wool yarns, high color strength were achieved in the presence of AlK(SO₄)₂ mordant.     

Dyeing of cotton with thyme and pomegranate peel

Application of natural dyes for textiles is increasing due to awareness of environment, ecology, and pollution control. The purpose of this study is to determine the color, antimicrobial, and fastness properties of cotton fabrics dyed with thyme and pomegranate peel without a mordanting process. In this way, it was planned to avoid use of metallic mordants (heavy-metal salts) and prevent heavy-metal pollution for ecological production. Additionally, a variety of the most commonly used mordants, namely potassium aluminum sulfate, copper(II) sulfate, iron(II) sulfate, and tin(II) chloride, were used for mordanting of cotton fabrics in order to compare the differently mordanted and unmordanted dyed fabrics’ color efficiencies (K/S) and CIE L ^* a ^* b ^* color values. It was found that mordant type had an effect on color efficiency and the color coordinates of fabrics dyed with both thyme and pomegranate fruit peel. Moreover, the antimicrobial properties of the fabrics only dyed directly with thyme and pomegranate peel without any mordanting process were determined to demonstrate the usability of these natural dye sources without use of any mordanting agents. The obtained antimicrobial activities were compared with undyed samples. Undyed samples showed no antimicrobial activity, whereas significant antimicrobial activity was obtained after the dyeing procedure using thyme and pomegranate peel on unmordanted fabrics. Washing, rubbing, perspiration, and lightfastness properties of dyed fabrics were also evaluated. Thyme and pomegranate fruit peel as natural dye sources revealed sufficient results even for unmordanted samples.     

Dyeing of white and indigo dyed cotton fabrics with Mimosa tenuiflora extract

Mimosa tenuiflora extract has been used in food industry as an additive and in textile and leather industry as a colorant. Two types of fabrics, ready to be dyed white and indigo dyed fabrics, were dyed with M. tenuiflora extract. The fabrics were mordanted after dyeing with six different metal salts. Colorimetric evaluations of fabrics were carried out by spectrophotometer. Colour fastness to washing, rubbing and light were performed. Colour strength of fabrics was calculated from Kubelka–Munk formula. Highest vividness (C¹) values were obtained by Ni mordant. Moderate fastness values were observed. However poor wet rubbing fastness values were observed in the case of indigo dyed fabrics due to lack of good wet rubbing fastness of indigo itself.     

Tannin-Mordant Coloration with Matcha (camelia sinensis) and Iron(II)-Lactate on Human Hair Tresses

The aim of this work was to optimize our natural hair dyeing system which we described in our previous work and to compare with other dyeing systems. Therefore, we investigated concentration limits of matcha and mordant and compared this new dyeing method with commercial permanent systems on the market. Completely unpigmented hair tresses were dyed with matcha powder (camelia sinensis) and iron(II)-lactate. To investigate the wash fastness and concentration limits, the differently dyed hair tresses were spectrophotometrically measured. The comparison of the damage potential for which cysteic acid is an indicator was measured by NIR. The concentration of matcha and mordant are responsible for the intensity of the color results. The higher the matcha or the mordant concentration, the darker the color results of the dyed hair tresses. Hair damage of matcha mordant dyeing is comparable with results of commercial permanent hair coloration systems. Moreover, the results of wash fastness of matcha mordant dyed hair tresses is comparable and even better by tendency to permanent colored hair tresses.     

Eco-friendly and protective natural dye from red prickly pear (Opuntia Lasiacantha Pfeiffer) plant

New natural dye extracted from red prickly pear was used for dyeing wool with different types of mordents. The effect of mordant concentration on the color strength was discussed; the results obtained indicated that the color strength decreases with the increase of mordant concentration. The effect of the dye bath pH, salt concentration, dyeing temperature and dyeing time was also studied. The color strength and the dye uptake have exhibited high values. Good fastness properties of the dyed fabric were achieved.Antimicrobial activity of wool fabric dyed with this dye was tested according to diffusion agent. Test organisms as Escherichia coli, Bacillus subitilus, Pseudomons aeruginosa and Staphylococcus aureus were used and the results indicated that the samples exhibited a high inhibition zone.According to the available literature, this is the first report concerning a natural dye for fabric from fruits of red prickly pear plants.     

Influence of gamma radiation on the colour strength and fastness properties of fabric using turmeric (Curcuma longa L.) as natural dye

The effect of gamma radiation on the dyeing of cotton with extract of turmeric (Curcuma longa L.) powder has been investigated. Cotton fabric and turmeric powder were irradiated to absorbed doses of 1, 2, 3, 4 and 6 kGy using Co-60 gamma irradiator. Dyeing parameters such as temperature, pH and mordant concentration were optimized. Dyeing was performed using un-irradiated and irradiated cotton with the extracts of un-irradiated and irradiated turmeric powder in order to investigate the effect of radiation treatment on the colour strength of dyed fabric. The reported data of un-irradiated and irradiated fabrics dyed with un-irradiated and irradiated dyes were obtained using the spectraflash SF-650. The colourfastness to light, rubbing- and washing-fastness properties showed that gamma irradiation has improved the dyeing characteristics from fair to good.     

Enlightening the influence of mordant, dyeing technique and photodegradation on the colour hue of textiles dyed with madder - A chromatographic and spectrometric approach

Wool samples were dyed with madder and alum, copper, and iron salts at different concentration by pre-mordanting (MD) and simultaneous mordanting (M + D) procedures. Samples were artificially aged to identify the influence of the mordant on the madder chromophores photodegradation. A set of analytical techniques was used for complete characterisation of the dyed fibres before and after light exposure, which included colour and chromophore analysis (colourimetry and LC-ESI-MS/MS analysis), determination of mordant ions amounts in the fibres (FAAS and ICP-OES analysis), morphological characterisation of the fibres and punctual chemical analysis (SEM-EDS studies).Fibre colour hue was found to be dependent on the mordant ion nature, mordant bath concentration and dyeing procedure. Mordant ion quantification showed that the uptake of metal ion by the fibres is relatively small, with the Cu ion presenting the highest affinity for the fibre. MD method yields fibres with higher amounts of metal ions and larger chromophore chromatographic peak areas corresponding, in general, to stronger colour hues. Photodegradation was more severe in alum mordant samples and in the first 480 h of light exposure. Chromophore degradation rates are unequal and dependent on the mordant nature, contributing for colour changes observed after light exposure.     

Eco-dyeing and functional finishing of wool fabric based on Portulaca oleracea L. as colorant and Musa basjoo as natural mordant

Biomass energy is the most acknowledged renewable resource due to its universality, richness, and renewability. This study utilized a Portulaca oleracea L. plant as a natural colorant for wool fabric dyeing with a high color yield at optimum extraction and dyeing conditions. To evaluate the dyeing mechanism and feasibility of the extracted dyes, we analyzed and characterized the molecular structure and nano-level particle size. The dyeing kinetics and the morphology of dyed fabrics were integratedly explored; the adsorption process of wool fabric on natural colorant molecules was increasingly in line with the pseudo-second-order kinetic adsorption model. Further, the dyeing effects of wool fabrics were compared to that of Musa basjoo mordant and synthetic dyes to confirm the superior color depth (K/S value 23.53), biological function as anti-ultraviolet (UPF value 253.47), and anti-bacterial activity (antibacterial rate of Staphylococcus aureus/Escherichia coli was 71.3%/37%). Our findings provide a feasible scheme for providing deep color and biological activity to wool fabrics. This has broad application prospects in the field of eco-friendly textile materials.     

Study the effect of metal ion on wool fabric dyeing with tea as natural dye

Aqueous extract of natural dye, tea was dyed on the wool fabric with dark brown for 2% and 5% shade. The tea containing tannins as the main colorant species to produce different shade with different mordant salts. The mordant salts Alum, CuSO₄, FeSO₄, ZnSO₄, Na₂SO₄, and MgSO₄ were used to dye fabric using three different dyeing methods: pre-mordanting, meta-mordanting and post-mordanting. The color of the fabric was investigated on Data Color matching system in terms of K/S and CIE Lab-color difference values. The post-mordanting method gave the great depth of shade of natural dye tea with 2% and 5% shade, it also give good light fastness and wash fastness properties. Copper was found as a good mordant to achieve the best results with transition metal ions effect. Deep shades (K/S = 17.50) were obtained for original sample of 5% with color difference ΔE value is 0.17, as compare to 2% original sample of tea of light brown shades (K/S = 10.50) with color difference ΔE value is 0.50 under maintained temperature at 85 °C for 35 min of dyeing.     

Synthesis and application of disazo reactive dyes derived from sulfatoethylsulfone pyrazolo[1,5-a]pyrimidine derivatives

Two models of heterocyclic reactive dyes based on disazo pyrazoloprymidine derivatives and possessing a sulfatoethylsulfone reactive group were synthesized and characterized by elemental analysis, IR and ¹H NMR spectroscopy. The dyes were applied to cotton, wool and silk fabrics. Effects of varying dyeing conditions were investigated. The results assessed for the exhaust dyeing methods on the different fabrics indicate that these reactive dyes showed high exhaustion and fixation values. The dyed fabrics also showed very good light fastness and good to excellent washing, rubbing and perspiration fastness.     

Synthesis of Some Novel Biologically Active Disperse Dyes Derived from 4-Methyl-2,6-dioxo-1-propyl-1,2,5,6-tetrahydro-pyridine-3-carbonitrile as Coupling Component and Their Colour Assessment on Polyester Fabrics

A series of novel azo-disperse dyes containing alkylhydrazonopyridinone structures were synthesized. 4-Methyl-2,6-dioxo-1-propyl-1,2,5,6-tetrahydropyridine-3-carbonitrile (8) is synthesized by one-pot synthesis using ethyl cyanoacetate, propylamine, and ethyl acetoacetate. Compound 8 is then coupled with aromatic and heteroaromatic diazonium salts to afford the corresponding aryl- and heteroaryl-4-methyl-2,6-dioxo-1-propyl-1,2,5,6-tetrahydropyridine-3-carbonitriles 12a,b and 13a-c. Structural assignments to the dyes were made using NMR spectroscopic methods. A high temperature dyeing method was employed to apply these dyes to polyester fabrics. Most of the dyed fabrics tested displayed very good light fastness levels and good wash fastness. Finally, the biological activity of the prepared dyes against Gram positive bacteria and Gram negative bacteria were evaluated.     

Synthesis of Some New Thiazolo[3,2‐a]pyrimidine Derivatives and Their Applications as Disperse Dyes

A series of novel thiazolo[3,2‐a]pyrimidine derivatives were synthesized by using β‐ketoanilides 1a–c as starting materials and as key intermediates for preparation of new pyrimidinecompounds 3a–e and fused heterocyclic pyrimidine derivatives 5a–c . The new compounds were transformed to disperse dyes 6a,b and 7 . The chemical structures were elucidated by spectroscopic and elemental analyses and found to be in good agreement with the proposed structures. The versatility of compounds 6a,b and 7 for textile dyeing as disperse dyes was reported. The synthesized dyes were applied to polyester fabrics by using high temperature dyeing method at 120°C. The dye uptake expressed as color strength (k/s) of the dyed samples has been measured. Moreover, the color strength was examined in detail. In addition, the position of color in CIELAB coordinates (L*, a*, b*, h, and C*) was assessed. The color fastness of the dyed samples gave excellent results for washing and rubbing; however, the light fastness was moderate. Raman spectra of dyed samples unequivocally excluded ring dyeing and found to match with the proposed structures.     

Dyeing behaviour of gamma irradiated cotton fabric using Lawson dye extracted from henna leaves (Lawsonia inermis)

Dyeing behavior of gamma irradiated cotton fabric using Lawson dye extracted from henna leaves has been investigated. Cotton and dye powder are irradiated to different absorbed doses of 2, 4, 6, 8 and 10 kGy using Cs-137 gamma irradiator. The dyeing parameters such as dyeing time, electrolyte (salt) concentration and mordant concentrations using copper and iron as mordants are optimized. Dyeing is performed using un-irradiated and irradiated cotton with dye solutions and their color strength values are evaluated in CIE Lab system using Spectraflash –SF650. Methods suggested by International Standard Organization (ISO) have been employed to investigate the colourfastness properties such as colourfastness to light, washing and rubbing of irradiated dyed fabric. It is found that gamma ray treatment of cotton dyed with extracts of henna leaves has significantly improved the color strength as well as enhanced the rating of fastness properties.     

Application of anthocyanins as natural dye extracted from Brassica oleracea L. var. capitata f. rubra: dyeing studies of wool and silk fibres

Brassica oleracea L. var. capitata f. rubra (Red Cabbage) dye is composed mainly of natural pigment called anthocyanins used as a natural colourant. Wool and silk fibres were dyed with the aqueous extract obtained from red cabbage. The dyeing process was investigated and the combined effects of dyeing conditions on the colour yield parameter (K/S) were studied. Resulted fastness to wash, rubbing and light of the dyed fabrics were evaluated. Chemical Oxygen Demand (COD) and Biological Oxygen Demand (BOD₅₎ of the residual effluent were measured. Best dyeing conditions were found to be: 50 g/100 mL, pH 2, 60 min and 100 °C, respectively, for the red cabbage weight, pH, dyeing duration and temperature. Good fastnesses properties were found in both cases: for wool and silk fabrics. It was found also that the calculated biodegradability ratio (COD/BOD₅) of the residual bath of dyeing wool and silk with red cabbage extract are lower than 1.5 which means that these baths are biodegradable.     

One-pot synthesis of disperse dyes under microwave irradiation: dyebath reuse in dyeing of polyester fabrics

A series of 4-hydroxyphenylazopyrazolopyrimidine disperse dyes were prepared via one-pot reactions of p-hydroxyphenylhydrazone, hydrazine hydrate, and acetylacetone or enaminones using microwave irradiation as an energy source. Structural assignments of the dyes were confirmed by X-ray crystallographic structure determination. Instead of discharging the dyebath after each dyeing cycle, the residual dyebath was spectrophotometrically analyzed and then pH readjusted for a repeat dyeing with longer time. Fastness of the dyed samples was measured after each recycle. Most of the dyed fabrics tested displayed good light fastness and excellent fastness to washing and perspiration. Finally, the biological activity of the synthesized dyes against Gram positive bacteria, Gram negative bacteria and yeast were evaluated.     

Synthesis,characterization and dyeing assessment of novel acid azo dyes and mordent acid azo dyes based on 2-hydroxy-4-methoxybenzophenone-5-sulfonic acid on wool and silk fabrics

Novel acid mono azo and mordent acid mono azo dyes were synthesized by the coupling of diazonium salt solution of different aromatic amines with 2-hydroxy-4-methoxybenzophenone-5-sulfonic acid. The resulting dyes were characterized by spectral techniques like elemental analysis, IR, ¹H-NMR and UV visible spectroscopy. The dyeing performance of all the dyes was evaluated on wool and silk fabrics. The dyeing of chrome pre-treated wool and silk fabrics showed better hues on mordented fabrics. Dyeing of wool and silk fabrics resulted in pinkish blue to red shades with very good depth and levelness. The dyed fabrics showed excellent to very good light, washing, perspiration, sublimation and rubbing fastness.     

Sustainable process for the pretreatment and dyeing of Eri silk

The green process route for pre-treatment and dyeing of Eri silk is proposed and investigated in this study. The natural plant-based saponins were extracted from Sapindus mukorossi by aaqueous extraction technique. Extracted Saponins showed a high emulsification index (68), low surface tension (41 dyne/cm), mild foaming (200 mm), and a slightly acidic pH, these characteristic properties are considered to be best suited for the processing of silk. The degumming was performed using Sapindus extract liquid with a concentration of 10% (owf) for 60 min at a temperature of 95 °C. The Eri silk degumming produced similar weight loss (4.63%), water absorbency (3 s) and optical properties - whiteness (80.33), yellowness (2.27) and brightness (70.05), as compared to the conventional process. The tensile strength (8.28 kgf)) and elongation (34.29%) was found to be better than the properties of the fabric processed with conventional chemical processing. The dyeing of degummed and bleached Eri silk with natural dyes showed comparable colour depth and uniformity of shade as compared to the conventional chemical processing. The overall fastness performance of dyed Eri silk was in line with the industry standards. Advanced characterization techniques such as FTIR was used for structural analysis of treated Eri silk.     

Improvement of colour strength and colourfastness properties of gamma irradiated cotton using reactive black-5

The dyeing behaviour of gamma irradiated cotton fabric using Reactive Black-5 dye powder has been investigated. The mercerized, bleached and plain weaved cotton fabric was irradiated to different absorbed doses of 100, 200, 300, 400, 500 and 600 Gy using Co-60 gamma irradiator. Dyeing was performed using irradiated and un-irradiated cotton with dye solutions. The dyeing parameters such as temperature of dyeing, time of dyeing and pH of dyeing solutions were optimised. The colour strength values of dyed fabrics were evaluated by comparing irradiated and un-irradiated cotton in CIE Lab system using Spectra flash SF650. Methods suggested by International Standard Organisation (ISO) were employed to study the effect of gamma irradiation on the colourfastness properties of dyed fabric. It is found that gamma irradiated cotton dyed with Reactive Black-5 has not only improved the colour strength but also enhanced the rating of fastness properties.     

Disperse Dyes Based on 5‐Arylazo‐thiazol‐2‐ylcarbamoyl‐thiophenes: Synthesis,Antimicrobial Activity and Their Application on Polyester

A series of novel 5‐arylazo‐thiazol‐2‐ylcarbamoyl‐thiophene derivatives was synthesized, and their chemical structures were secured by elemental and spectroscopic analyses. Their versatility for pharmaceutical purposes and textile dyeing as disperse dyes were reported. The synthesized dyes were applied to polyester fabrics by using high temperature dyeing method at 130°C. The dyed polyester fabrics displayed very good washing and perspiration fastness and moderate light fastness. Finally, the synthesized compounds showed biological activities against Bacillus subtilis, Staphylococcus aureus (Gram positive bacteria), Escherichia coli, and Pseudomonas aeruginosa (Gram‐negative bacteria), while no effect had been reported against fungi. The minimum inhibitory concentration of the most active compound was evaluated.     

Synthesis and Application of Disperse Dyes Based on 2-Aminothiazole Derivatives

A series of novel monoazo disperse dyes based on 2-amino-5-nitro-4-(p-nitrophenyl)thiazole were prepared using various N,N-dialkylaniline derivatives as the coupling components. The spectral properties in the IR and visible range of the dyes were investigated. The dyeing performance of these dyes was assessed on nylon fabric. These dyes were found to give a wide range of color shades from reddish brown to indigo with excellent brightness, levelness, and depth on nylon fabric. The dyed fabric showed fairly good light fastness, good to excellent fastness to wash and perspiration, and excellent fastness to sublimation. The dyebath exhaustion and fixation of the dyes on nylon were found to be very good and acceptable.