Polyion complex nanomaterials from block polyelectrolyte micelles and linear polyelectrolytes of opposite charge. 2. Dynamic properties

The present study investigates the relationship between the aggregation state and dynamic properties of block ionomer complexes (BICs) based on amphiphilic ionic block copolymers. The polyion coupling of 4'-(aminomethyl)fluorescein (AMF)-labeled poly(sodium methacrylate) (PMANa) or polystyrene- block-poly(sodium carboxylates) with poly(N-ethyl-4-vinylpyridinium bromide), PEVP was studied at an excess of carboxylate groups [PEVP]/[COO(-)] TOTAL = 0.3 and detected by fluorescence quenching. The polyion interchange reactions included migration of PEVP between the following: (1) two linear polyanion chains, (2) linear polyanion chain and anionic polyion shell micelle, or (3) two anionic polyion shell micelles. Additionally, the interchange of AMF-labeled PMANa with unlabeled PMANa in the shell of polystyrene- block-PEVP micelles was studied. The interchange reactions were carried out at [PEVP]/[COO(-)] TOTAL = 0.15 and detected by fluorescence quenching (direct reaction) or ignition (reverse reaction). The rates of these reactions were compared using half-conversion times and, when possible, second-order reaction kinetic constants. The dependences of the rates on the ionic strength and polyion length observed for BICs were similar to those previously reported for regular interpolyelectrolyte complexes (IPECs) of linear polyions. However, the interchange reactions involving polyion shell micelles were much slower than those reactions observed in IPECs. The coupling reactions involving polyion shell micelles were also slower compared with the coupling of linear polyions. The observed phenomena were attributed to the aggregation state of polyion shell micelles and discussed using the collision model for polyion interchange reactions previously proposed for IPECs.     

Polyion complex micelles formed from glucose oxidase and comb‐type polyelectrolyte with poly(ethylene glycol) grafts

The comb‐type polyelectrolyte, poly(ethylene glycol)‐graft‐poly(allyl amine) (PEG‐g‐PAA), was synthesized to prepare polyion complex (PIC) micelles with Aspergillus Niger Glucose oxidase (GOD). Even after mixing GOD and PEG‐g‐PAAs with various PEG contents, the resulting mixtures remained transparent but the mixture of GOD and PAA homopolymer immediately precipitated. In the mixtures prepared with a stoichiometric mixing ratio, the formation of PIC micelles with a core‐shell structure was suggested from dynamic and static light scattering measurements. Glucose, the substrate for GOD, could easily diffuse into the PIC micelles, and the GOD molecules were active even in the core of the PIC micelles. GOD didn't lose its enzymatic activity through entrapment into the PIC micelles. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3842–3852, 2008     

Protein charge parameters that influence stability and cellular internalization of polyelectrolyte complex micelles

Proteins are an important class of biologics, but there are several recurring challenges to address when designing protein-based therapeutics. These challenges include: the propensity of proteins to aggregate during formulation, relatively low loading in traditional hydrophobic delivery vehicles, and inefficient cellular uptake. This last criterion is particularly challenging for anionic proteins as they cannot cross the anionic plasma membrane. Here we investigated the complex coacervation of anionic proteins with a block copolymer of opposite charge to form polyelectrolyte complex (PEC) micelles for use as a protein delivery vehicle. Using genetically modified variants of the model protein green fluorescent protein (GFP), we evaluated the role of protein charge and charge localization in the formation and stability of PEC micelles. A neutral-cationic block copolymer, poly(oligoethylene glycol methacrylate-block-quaternized 4-vinylpyridine), POEGMA₇₉-b-qP4VP₁₇₅, was prepared via RAFT polymerization for complexation and microphase separation with the panel of engineered anionic GFPs. We found that isotropically supercharged proteins formed micelles at higher ionic strength relative to protein variants with charge localized to a polypeptide tag. We then studied GFP delivery by PEC micelles and found that they effectively delivered the protein cargo to mammalian cells. However, cellular delivery varied as a function of protein charge and charge distribution and we found an inverse relationship between the PEC micelle critical salt concentration and delivery efficiency. This model system has highlighted the potential of polyelectrolyte complexes to deliver anionic proteins intracellularly. Using this model system, we have identified requirements for the formation of PEC micelles that are stable at physiological ionic strength and that smaller protein–polyelectrolyte complexes effectively deliver proteins to Jurkat cells.

The stability and delivery efficiency of protein-based polyelectrolyte-complex micelles was evaluated for a panel of proteins with varying net charge and charge distribution.     

Interaction between polyelectrolyte gels and surfactants of opposite charge

Investigations dealing with fundamental aspects of the interaction between covalently cross-linked polyelectrolyte gels and oppositely charged surfactants are reviewed. For reference, a brief summary of results from recent studies of associative phase separation in linear polyelectrolyte/surfactant mixtures is also included. It is found that great progress has been made in several sub-areas since the first reports appeared in the early 1990's. The frequently observed surfactant-induced volume transition has been studied in detail. Its relation to associative phase separation in solutions and the important role of polyion-mediated micelle–micelle attractions have been clarified. Phase separation in gels, in particular core/shell structures, has been studied in great detail. The importance of network mediated elastic forces between two phases coexisting in the same gel has been demonstrated and some of their consequences have been clarified. Hydrophobic interactions between polyion and micelle have been found to have strong effects on both binding and swelling isotherms. The effect of salt, which has been found to sometimes disfavor, sometimes promote surfactant binding, is quite well understood. The microstructure of gels in the collapsed state has been studied in great detail and is often found to be highly ordered, resembling liquid crystalline phases common to surfactant/water systems. The kinetics of surfactant binding and the associated volume change has been investigated to some extent. Progress has been made for gels displaying phase separation during the volume transition.     

Structural dynamics,phase behavior,and applications of polyelectrolyte complex micelles

Self-assembly between oppositely charged polyelectrolytes conjugated to neutral polymeric blocks form polyelectrolyte complex (PEC) micelles. These nanostructures have gained significant interest in the field of nucleic acid and protein delivery, along with emerging applications in biosensing and catalysis. These carriers are highly modular systems, with the ability to engineer stimuli-responsive and targeting properties, making them smart platforms for biomedical applications. In this review, we discuss the current understanding of mechanisms involved in the assembly and disassembly of these nanoparticles, and the structural and functional changes as a response to solution conditions. We also discuss the latest and most impactful applications of PEC micellar systems in the biomedical field, with far-reaching influence on the treatment of various human diseases.     

Nanofibers resulting from cooperative electrostatic and hydrophobic interactions between peptides and polyelectrolytes of opposite charge

We investigated whether cationic peptides that contain hydrophobic side chains were able to stabilize themselves via hydrophobic interactions between neighboring peptide molecules upon electrostatic binding to oppositely charged polyelectrolytes. The interaction mechanism was examined through a model system consisting of the anionic polyelectrolyte alginate and the cationic decapeptide ozarelix. The interaction resulted in the formation of highly ordered complexes that were noticeable upon visual inspection. These complexes were then investigated by microscopic techniques and shown to exhibit a branched network structure. Cryogenic-temperature transmission electron microscopy (cryo-TEM) and negative staining TEM revealed that the molecular interactions between alginate and ozarelix led to the formation of nanofibers. The rodlike nanofibers had a diameter distribution of 4-8 nm. Isothermal titration calorimetry was used to determine the thermodynamic parameters of the alginate-ozarelix interaction. The binding constant was found to be on the order of 10(6) M(-1), indicating a high binding affinity. The interaction of the peptide with the polyelectrolyte triggered profound changes in the conformation of ozarelix, which was confirmed by UV spectroscopy and circular dichroism. On the basis of these experimental results, a theoretical modeling study of the alginate-ozarelix interaction was conducted to gain a better molecular-level understanding of the complex structure. It revealed that, upon binding of ozarelix to alginate, new intermolecular and intramolecular aromatic interactions between the ozarelix molecules occurred. These interactions changed the conformation of the peptide, a modification in which the aromatic side chains played a major role. Our results indicate that the cationic peptides interact with the polyanions via electrostatic interactions, but are additionally stabilized via hydrophobic interactions. This binding mode may serve as a powerful tool to extend the duration of drug release in hydrogel drug delivery systems.     

Interfacial behaviour of block polyelectrolytes,III. Formation of surface micelles

The aggregation of (poly)styrene/quaternized (poly)-4-vinylpyridine diblocks into regular circular structures has been observed in Langmuir-Blodgett films removed from a pure water surface. These novel aggregates, termed surface micelles, form at low surface pressures (< 2 mN/m) and exhibit rich isotherm behaviour as Langmuir films. A distinct first order phase transition is observed for the decylated derivatives of a series of diblocks (i.e. (PS)₂₆₀(C₁₀PVP⁺I⁻)_n; n = 70, 120, 240) which has been interpreted as a transition from an entirely surface-adsorbed micelle to a surface micelle whose polyelectrolyte chains have been forced into the aqueous subphase. Transmission electron and atomic force micrographs of LB films provide for direct visualization of these surface micelles as well as the means to estimate their aggregation numbers, N.     

Stimuli-responsive behavior of complex micelles based on double hydrophilic block copolymer and fluorescent indicator

The double hydrophilic block copolymer poly(ethylene glycol mono-methyl ether)-block-poly(4-vinylpyridine) (mPEG₄₃-b-P4VP₁₁₅) was synthesized by atom transfer radical polymerization. The structure, molecular weight and molecular weight distribution of mPEG₄₃-b-P4VP₁₁₅ were characterized by ¹H-NMR and gel permeation chromatography combined with laser light scattering technique. The complex micelles based on mPEG₄₃-b-P4VP₁₁₅ and the disodium 2-naphthol-3,6-disulfonate were obtained in acid aqueous solution. The morphologies of the complex micelles were observed by transmission electron microscopy. The revertible temperature and pH-responsive behaviors of complex micelles were studied by dynamic light scattering and fluorescence techniques.     

Formation of ordered microstructures in polyelectrolyte/surfactant systems: linear anionic polyelectrolytes and cetylpyridinium chloride

Synchrotron X‐ray scattering was used for the structural investigation of complexes between anionic polyelectrolytes and cetylpyridinium chloride (CPC). According to the Bragg peaks, different types of ordering are proposed. Cetylpyridinium chloride in conjunction with carrageenan forms bilayers connecting rigid polysaccharide chains. In the presence of poly(styrenesulfonate), several micelles are bound to one chain. They appear rather small in size due to specific interactions with this polyion. In poly(acrylate)/CPC and poly(methacrylate)/CPC solutions, a cubic structure is indicated.     

Ionic micelles in solutions of polyelectrolytes and block copolymers with oppositely charged blocks: Computer simulation

Complexation in solutions of strongly charged polyelectrolytes and diblock copolymers composed of oppositely charged and neutral blocks were studied via the molecular dynamics method. Stoichiometric micellar complexes formed in a dilute solution represent cylindrical brushes whose conformation is determined by the linear charge density on the polyelectrolyte and by temperature. As the concentration of macromolecules increases, the orientational ordering of anisotropic ionic micelles takes place. The complexation can induce the stiffening of the polyelectrolyte chain.     

Solution behavior of rod-like polyelectrolyte-surfactant aggregates polymerized from wormlike micelles

The behavior of a rod-like, water-soluble, polyelectrolyte-surfactant aggregate system (pC16TVB) in aqueous solution is characterized to determine the partitioning of surfactant in these systems and the impact on aggregate structure. These aggregates are generated by in situ polymerization of a cationic surfactant-hydrotrope wormlike micelle system. This system differs from most other polyelectrolyte-surfactant systems in that the monomer groups and the surfactant are present in ion pairs in the absence of added salts or counterions, so the stoichiometry (with respect to charge) is 1:1 for the system. Therefore, after polymerization the surfactant acts as the counterion for the polyelectrolyte chains as other counterions (salts) are not available. Despite being present in a 1:1 molar ratio, the aggregates are surprisingly stable in water (concentrations >600 mg/mL have been achieved). The conformation of the polyelectrolyte in the aggregate is analogous to the case of a polymer chain in tight confinement in a "tube" or cylindrical pore in which the pore walls are attractive--the tube is formed by the surfactant which is free to dissociate from the aggregates. A simple model for the structure and partitioning is presented and the ability to manipulate the aggregate structure is demonstrated.     

Interfacial microgels formed by oppositely charged polyelectrolytes and surfactants. 1. Influence of polyelectrolyte molecular weight

The synergistic adsorption and complexation of polystyrene sulfonate, PSS (a highly charged anionic polyelectrolyte), and dodecyltrimethylammonium bromide, C12TAB (a cationic surfactant), at the air-water interface can lead to interfacial gels that strongly influence foam-film drainage and stability. The formation and characteristics of these gels have been studied as a function of PSS molecular weight by combining surface tension, ellipsometry, and foam-film drainage experiments. Simultaneously the solution electromotive force has been measured to track the polymer-surfactant interactions in the bulk solution. It has been found that there is a critical molecular weight for surface gelation as well as for bulk precipitation and aggregation. Furthermore, we show that for the lowest molecular weights, PSS adsorbs with C12TAB in compact layers at the air-water interface. In particular, for mixtures of C12TAB with the monomer compound of the PSS repeat unit (e.g. Mw = 208), interfacial complexation is found to be similar to that of catanionic mixtures (mixtures of surfactants of opposite charge).     

Synthesis and solution behavior of carbon nanotubes decorated with amphiphilic block polyelectrolytes

The aqueous solubilization of carbon nanotubes (CNTs) with the aid of a block copolymer possessing one polyelectrolyte block (namely polystyrene-b-sodium (sulfamate/carboxylate polyisoprene)) is reported. The solubilization protocol, based on the co-dissolution of the copolymer and the CNTs, leads to the formation of supramolecular assemblies on the side walls of the tubes. Electron microscopy as well as infrared spectroscopy and thermogravimetric analysis were employed as meaningful probes to identify the adsorption of the polymer onto the surface of CNTs and the composition of the final hybrid material. Viscosity measurements on solutions of the copolymer decorated CNTs indicate that the polyelectrolyte effect, which is observed in the case of net polymers, is preserved in a lesser extent in the case of the copolymer/CNTs dispersions.     

Comparison of complex coacervate core micelles from two diblock copolymers or a single diblock copolymer with a polyelectrolyte

With light scattering titrations, we show that complex coacervate core micelles (C3Ms) form from a diblock copolymer with a polyelectrolyte block and either an oppositely charged polyelectrolyte, a diblock copolymer with an oppositely charged polyelectrolyte or a mixture of the two. The effect of added salt and pH on both types of C3Ms is investigated. The hydrodynamic radius of mixed C3Ms can be controlled by varying the percentage of oppositely charged polyelectrolyte or diblock copolymer. A simple core-shell model is used to interpret the results from light scattering, giving the same trends as the experiments for both the hydrodynamic radii and the relative scattering intensities. Temperature has only a small effect on the C3Ms. Isothermal titration calorimetry shows that the complexation is mainly driven by Coulombic attraction and by the entropy gain due to counterion release.     

Desorption of bottle-brush polyelectrolytes from silica by addition of linear polyelectrolytes studied by QCM-D and reflectometry

The possibility of exchanging adsorbed layers of PEO(45)MEMA:METAC-X brush polyelectrolytes (with two different charge densities, 10 and 75 mol%, denoted by X), with poly(MAPTAC), a highly charged linear polyelectrolyte, was investigated by quartz crystal microbalance with dissipation and reflectometry. The studies were conducted on a silica substrate at pH 10, conditions under which only electrostatic interactions are effective in the adsorption process. Based on the results, it was concluded that PEO(45)MEMA:METAC-10 forms an inhomogeneous layer at the interface through which poly(MAPTAC) chains can easily diffuse to reach the surface. On the other hand, the PEO(45)MEMA:METAC-75 layer was not affected when exposed to a poly(MAPTAC) solution. We argue that the observed effect for PEO(45)MEMA:METAC-75 is due to the formation of a homogeneous protective brush layer, in combination with the small difference in surface affinity between the bottle-brush polyelectrolyte and poly(MAPTAC), together with the difficulty of displacing highly charged polyelectrolyte chains once they are adsorbed on the oppositely charged surface. We also use the combination of QCM-D and reflectometry data to calculate the water content and layer thickness of the adsorbed layers.     

Hybrid polyion complex micelles formed from double hydrophilic block copolymers and multivalent metal ions: size control and nanostructure

Hybrid polyion complex (HPIC) micelles are nanoaggregates obtained by complexation of multivalent metal ions by double hydrophilic block copolymers (DHBC). Solutions of DHBC such as the poly(acrylic acid)-block-poly(acrylamide) (PAA-b-PAM) or poly(acrylic acid)-block-poly(2-hydroxyethylacrylate) (PAA-b-PHEA), constituted of an ionizable complexing block and a neutral stabilizing block, were mixed with solutions of metal ions, which are either monoatomic ions or metal polycations, such as Al(3+), La(3+), or Al(13)(7+). The physicochemical properties of the HPIC micelles were investigated by small angle neutron scattering (SANS) and dynamic light scattering (DLS) as a function of the polymer block lengths and the nature of the cation. Mixtures of metal cations and asymmetric block copolymers with a complexing block smaller than the stabilizing block lead to the formation of stable colloidal HPIC micelles. The hydrodynamic radius of the HPIC micelles varies with the polymer molecular weight as M(0.6). In addition, the variation of R(h) of the HPIC micelle is stronger when the complexing block length is increased than when the neutral block length is increased. R(h) is highly sensitive to the polymer asymmetry degree (block weight ratio), and this is even more true when the polymer asymmetry degree goes down to values close to 3. SANS experiments reveal that HPIC micelles exhibit a well-defined core-corona nanostructure; the core is formed by the insoluble dense poly(acrylate)/metal cation complex, and the diffuse corona is constituted of swollen neutral polymer chains. The scattering curves were modeled by an analytical function of the form factor; the fitting parameters of the Pedersen's model provide information on the core size, the corona thickness, and the aggregation number of the micelles. For a given metal ion, the micelle core radius increases as the PAA block length. The radius of gyration of the micelle is very close to the value of the core radius, while it varies very weakly with the neutral block length. Nevertheless, the radius of gyration of the micelle is highly dependent on the asymmetry degree of the polymer: if the neutral block length increases in a large extent, the micelle radius of gyration decreases due to a decrease of the micelle aggregation number. The variation of the R(g)/R(h) ratio as a function of the polymer block lengths confirms the nanostructure associating a dense spherical core and a diffuse corona. Finally, the high stability of HPIC micelles with increasing concentration is the result of the nature of the coordination complex bonds in the micelle core.     

Novel drug delivery systems based on the complexes of block ionomers and surfactants of opposite charge

In this paper we have evaluated a novel family of polymer-surfactant complexes formed between block ionomers and oppositely charged surfactants. Complexes between cationic copolymer poly(ethylene oxide)-g-polyethyleneimine (PEO-g-PEI) and sodium salt of oleic acid, natural nontoxic surfactant, are prepared and characterized. These systems self-assemble in aqueous solutions into particles with average size of 50–60 nm, which can solubilize hydrophobic dyes (Yellow OB) and drug molecules (paclitaxel). The use of the biologically active surfactants as components of block ionomer complexes is demonstrated for the complexes from PEO-g-PEI and all-trans-retinoic acid. Binding of relatively soluble drugs with block ionomers is illustrated using PEO-b-poly(sodium methacrylate) and doxorubicin. Overall these studies suggest that block ionomer complexes can be used to prepare a variety of soluble and stable formulations of biologically active compounds, and have potential application as drug delivery systems     

Influence of a strong polyelectrolyte block on the formation and properties of polymer micelles with a mixed corona

Joint micellization of two amphiphilic diblock copolymers is studied by velocity sedimentation, transmission electron microscopy, electrophoretic mobility measurements, and static light scattering. One of the diblock copolymers is a strong polyelectrolyte (polystyrene-block-poly(N-ethyl-4-vinylpyridinium bromide)), while the second one is a weakly charged or uncharged copolymer (polystyrene-block-poly(acrylic acid) or polystyrene-block-poly(4-vinylpyridine)). It is shown that the mixing of the diblock copolymers in a selective aqueous-organic solvent (DMF-methanol-water) leads to the formation of joint (hybrid) micelles and that the composition of these micelles is close to the composition of the polymer mixture. Micelles consist of an insoluble polystyrene core and a mixed corona composed of blocks of a strong polyelectrolyte and a weakly charged or uncharged copolymer. Aqueous dispersions of mixed micelles are obtained with the use of the dialysis technique, the spherical morphology of the micelles is ascertained, and their three-layered structure is proposed. The nonlinear dependence of the molecular mass of micelles on their composition is found. The decisive effect of electrostatic repulsion between strong polyelectrolyte units on the thermodynamics of micellization and the dispersion stability and molecular-mass characteristics of the mixed micelles is demonstrated.     

Effect of polyelectrolytes and polyelectrolyte mixtures on the electrokinetic potential of dispersed particles. 1. Electrokinetic potential of polystyrene particles in solutions of surfactants, polyelectrolytes and their mixtures

The effect of cationic and anionic surfactants, as well as cationic and anionic polyelectrolytes (PE), their binary mixtures on the electrokinetic potential of monodisperse carboxylated polystyrene (PS) particles as a function of the reagents dose, pH, the charge density (CD) of polymers, the surfactant/PE and binary PE mixture composition, and sequence of components addition to the suspension has been studied. It has been shown that addition of increasing amount of anionic surfactant/polyelectrolytes increases the absolute value of the negative zeta-potential of PS particles; this increase is stronger the CD of the PE and pH of the system are higher. Adsorption of cationic surfactant/polyelectrolytes leads to a significant decrease in the negative ζ-potential and to overcharging the particles; changes in the ζ-potential are more pronounced for PE samples with higher CD and for suspensions with lower pH values. In mixtures of cationic and anionic PE, in a wide range of mixture composition, the ζ-potential of particles is determined by the adsorbed amount of the anionic polymer independently of the CD of PEs and the sequence of addition of the mixture components. The isoelectric point of the surface is reached at the adsorbed amount of positive charges of PE that is approximately equal to the surface CD of particles. The laws observed were explained by features of macromolecules conformation in adsorbed mixed PE layers. Considerations about the role of coulombic and non-coulombic forces in the mechanism of anionic/cationic PE adsorption are presented.