Anaerobic Respiration on Self-Doped Conjugated Polyelectrolytes: Impact of Chemical Structure

We probe anaerobic respiration of bacteria in the presence of conjugated polyelectrolytes (CPEs). Three different CPEs were used to probe how structural variations impact biocurrent generation from Shewanella oneidensis MR-1. For the self-doped anionic CPE only, absorption spectroscopy shows that the addition of S. oneidensis MR-1 leads to the disappearance of the polaron (radical cation) band at >900 nm and an increase in the band at 735 nm due to the neutral species, consistent with electron transfer from microbe to polymer. Microbial three-electrode electrochemical cells (M3Cs) show an increase in the current generated by S. oneidensis MR-1 with addition of the self-doped CPE relative to other CPEs and controls. These experiments combined with in situ cyclic voltammetry suggest that the doped CPE facilitates electron transport to electrodes and reveal structure–function relationships relevant to developing materials for biotic/abiotic interfaces.     

Bacterial formation of extracellular U(VI) nanowires

Shewanella oneidensis MR-1 rapidly accumulates long, extracellular, U(VI) nanowires composed of polycrystalline chains of discrete meta-schoepite (UO(3)·2H(2)O) nanocrystallites. The production of uranium(VI) nanowires could provide a novel strategy for remediation of uranium contamination in sediments and aquifers, as well as the recovery of uranium in manufacturing processes.     

Cyclic voltammetric analysis of the electron transfer of Shewanella oneidensis MR-1 and nanofilament and cytochrome knock-out mutants

Shewanella is frequently used as a model microorganism for microbial bioelectrochemical systems. In this study, we used cyclic voltammetry (CV) to investigate extracellular electron transfer mechanisms from S. oneidensis MR-1 (WT) and five deletion mutants: membrane bound cytochrome (?mtrC/ΔomcA), transmembrane pili (ΔpilM-Q, ΔmshH-Q, and ΔpilM-Q/ΔmshH-Q) and flagella (?flg). We demonstrate that the formal potentials of mediated and direct electron transfer sites of the derived biofilms can be gained from CVs of the respective biofilms recorded at bioelectrocatlytic (i.e. turnover) and lactate depleted (i.e. non-turnover) conditions. As the biofilms possess only a limited bioelectrocatalytic activity, an advanced data processing procedure, using the open-source software SOAS, was applied. The obtained results indicate that S. oneidensis mutants used in this study are able to bypass hindered direct electron transfer by alternative redox proteins as well as self-mediated pathways.     

The use of electrochemical impedance spectroscopy (EIS) in the evaluation of the electrochemical properties of a microbial fuel cell

Electrochemical impedance spectroscopy (EIS) has been used to determine several electrochemical properties of the anode and cathode of a mediator-less microbial fuel cell (MFC) under different operational conditions. These operational conditions included a system with and without the bacterial catalyst and EIS measurements at the open-circuit potential of the anode and the cathode or at an applied cell voltage. In all cases the impedance spectra followed a simple one-time-constant model (OTCM) in which the solution resistance is in series with a parallel combination of the polarization resistance and the electrode capacitance. Analysis of the impedance spectra showed that addition of Shewanella oneidensis MR-1 to a solution of buffer and lactate greatly increased the rate of the lactate oxidation at the anode under open-circuit conditions. The large decrease of open-circuit potential of the anode increased the cell voltage of the MFC and its power output. Measurements of impedance spectra for the MFC at different cell voltages resulted in determining the internal resistance (R(int)) of the MFC and it was found that R(int) is a function of cell voltage. Additionally, R(int) was equal to R(ext) at the cell voltage corresponding to maximum power, where R(ext) is the external resistance that must be applied across the circuit to obtain the maximum power output.     

Comparative Study of Different Operation Modes of Microbial Fuel Cells Treating Food Residue Biomass

Four multiple air–cathode microbial fuel cells (MFCs) were developed under the scope of using extracts from fermentable household food waste (FORBI) for the production of bioelectricity. The operation of the MFCs was assessed in batch mode, considering each cell individually. Τhe chemical oxygen demand (COD) efficiency was relatively high in all cases (>85% for all batch cycles) while the electricity yield was 20 mJ/gCOD/L of extract solution. The four units were then electrically connected as a stack, both in series and in parallel, and were operated continuously. Approximately 62% COD consumption was obtained in continuous stack operation operated in series and 67% when operated in parallel. The electricity yield of the stack was 2.6 mJ/gCOD/L of extract solution when operated continuously in series and 0.7 mJ/gCOD/L when operated continuously in parallel.     

Inhibition of Tumor Progression through the Coupling of Bacterial Respiration with Tumor Metabolism

By leveraging the ability of Shewanella oneidensis MR-1 (S. oneidensis MR-1) to anaerobically catabolize lactate through the transfer of electrons to metal minerals for respiration, a lactate-fueled biohybrid (Bac@MnO₂) was constructed by modifying manganese dioxide (MnO₂) nanoflowers on the S. oneidensis MR-1 surface. The biohybrid Bac@MnO₂ uses decorated MnO₂ nanoflowers as electron receptor and the tumor metabolite lactate as electron donor to make a complete bacterial respiration pathway at the tumor sites, which results in the continuous catabolism of intercellular lactate. Additionally, decorated MnO₂ nanoflowers can also catalyze the conversion of endogenous hydrogen peroxide (H₂O₂) into generate oxygen (O₂), which could prevent lactate production by downregulating hypoxia-inducible factor-1α (HIF-1α) expression. As lactate plays a critical role in tumor development, the biohybrid Bac@MnO₂ could significantly inhibit tumor progression by coupling bacteria respiration with tumor metabolism.     

一种新型氧化还原电解液电化学电容器体系

以含有Fe3+/Fe2+离子对的H2SO4溶液为电解液, 以多孔炭做电极材料, 就Fe3+/Fe2+离子对在多孔炭纳米孔隙中的电化学行为及准电容效应进行了探讨. 循环伏安测试结果表明, Fe3+/Fe2+离子对在多孔炭电极纳米孔隙中发生了可逆的电化学反应. 恒流充放电结果发现, 加入Fe3+/Fe2+使得充放曲线出现对称的充放电平台, 有效地提高了电化学电容器(EC)的电能存储容量, 其单电极比电容最高达174 mAh•g−1, 比单纯的H2SO4电解液的比电容高109 mAh•g−1, 且有着良好的循环稳定性. 根据实验现象及结果, 探讨了Fe3+/Fe2+离子对在EC电极上的充放电机理, 并提出了一种新的概念——氧化还原电解液电化学电容器.     

A Sodium-Ion-Conducting Direct Formate Fuel Cell: Generating Electricity and Producing Base

A barrier that limits the development of the conventional cation-exchange membrane direct liquid fuel cells (CEM-DLFCs) is that the CEM-DLFCs need additional base to offer both alkaline environment and charge carriers. Herein, we propose a Na⁺-conducting direct formate fuel cell (Na-DFFC) that is operated in the absence of added base. A proof-of-concept Na-DFFC yields a peak power density of 33 mW cm⁻² at 60 °C, mainly because the hydrolysis of sodium formate provides enough OH⁻ and Na⁺ ions, proving the conceptual feasibility. Moreover, contrary to the conventional chlor-alkali process, this Na-DFFC enables to generate electricity and produce NaOH simultaneously without polluting the environment. The Na-DFFC runs stably during 13 hours of continuous operation at a constant current of 10 mA, along with a theoretical production of 195 mg NaOH. This work presents a new type of electrochemical conversion device that possesses a wide range of potential applications.     

Alkaline–Acid Zn–H2O Fuel Cell for the Simultaneous Generation of Hydrogen and Electricity

An alkaline–acid Zn–H₂O fuel cell is proposed for the simultaneous generation of electricity with an open circuit voltage of about 1.25 V and production of H₂ with almost 100 % Faradic efficiency. We demonstrate that, as a result of harvesting energy from both electrochemical neutralization and electrochemical Zn oxidation, the as‐developed hybrid cell can deliver a power density of up to 80 mW cm^?2 and an energy density of 934 Wh kg^?1 and maintain long‐term stability for H₂ production with an output voltage of 1.16 V at a current density of 10 mA cm^?2.     

Living and Conducting: Coating Individual Bacterial Cells with In Situ Formed Polypyrrole

Coating individual bacterial cells with conjugated polymers to endow them with more functionalities is highly desirable. Here, we developed an in situ polymerization method to coat polypyrrole on the surface of individual Shewanella oneidensis MR‐1, Escherichia coli, Ochrobacterium anthropic or Streptococcus thermophilus. All of these as‐coated cells from different bacterial species displayed enhanced conductivities without affecting viability, suggesting the generality of our coating method. Because of their excellent conductivity, we employed polypyrrole‐coated Shewanella oneidensis MR‐1 as an anode in microbial fuel cells (MFCs) and found that not only direct contact‐based extracellular electron transfer is dramatically enhanced, but also the viability of bacterial cells in MFCs is improved. Our results indicate that coating individual bacteria with conjugated polymers could be a promising strategy to enhance their performance or enrich them with more functionalities.     

Optimization for the improvement of power in equal volume of single chamber microbial fuel cell using dairy wastewater

Microbial fuel cells (MFCs) are a type of sustainable technology that may treat wastewater and generate power at the same time. Therefore, researchers are being challenged to design a technically feasible bio electrochemical system that generates environmentally friendly and renewable electricity from waste water. The current research examined at how MFC may be used to generate electricity while treating real dairy wastewater (RDW) with Pseudomonas aeruginosa-MTCC-7814. The experiments were carried out in fed-batch mode for 15 days in two 300 ml single chamber microbial fuel cells (SCMFCs) that were connected in series. During a fed batch investigation, three process parameters such as inoculum percentage, temperature, and pH were optimized. Inoculum percentage, temperature, and pH were found to be optimal at 5%, 37 °C, and 7.4, respectively and the highest open-circuit voltage was found to be 1025 mV. The COD removal efficiency and columbic efficiency (CE) were found to be 95.84% and 37.13% respectively. The optimized fed batch process yielded the maximum current density and power density of 313 mA/m² and 105 mW/m², respectively. Thus, this work successfully demonstrates that connecting single chamber microbial fuel cells (SCMFCs) in series is a viable technique for generating sustainable power utilizing Pseudomonas aeruginosa-MTCC-7814 from dairy wastewater.     

A Hydrazine-Nitrate Flow Battery Catalyzed by a Bimetallic RuCo Precatalyst for Wastewater Purification along with Simultaneous Generation of Ammonia and Electricity

The traditional technologies for industrial and agricultural effluent treatment are often energy-intensive. Herein, we suggest an electrochemical redox strategy for spontaneous and simultaneous decontamination of wastewater and generation of both fuels and electricity at low cost. Using hydrazine and nitrate effluents as a demonstration, we propose a hydrazine-nitrate flow battery (HNFB) that can efficiently purify the wastewater and meanwhile generate both ammonia fuel and electricity with the assistance of our developed bimetallic RuCo precatalyst. Specifically, the battery delivers a peak power density of 12 mW cm⁻² and continuously operates for 20 h with an ammonia yield rate of ca. 0.38 mmol h⁻¹ cm⁻² under 100 mA cm⁻². The generated electricity can further drive a hydrazine electrolyzer to produce hydrogen fuel. Our work provides an alternative pathway to purify wastewater and generate high value-added fuels at low cost.     

Contribution of redox-active properties of compost-derived humic substances in hematite bioreduction

The compost-derived humic substances(HS) can function as electron mediators for promoting hematite bioreduction because of its redox capacity. Humification process can affect redox capacities of compostderived HS by changing its intrinsic structure. However, the redox properties of compost-derived HS linking with hematite bioreduction during composting still remain unclear. Herein, we investigated the redox capacities of compost-derived HS, and assessed the responses of the redox capacities to t...     

Magnetization-induced double-layer capacitance enhancement in active carbon/Fe_3O_4 nanocomposites

The effects of magnetic fields on electrochemical processes have made a great impact on both theoretical and practical significances in improving capacitor performance. In this study, active carbon/Fe3O4-NPs nanocomposites(AC/Fe3O4-NPs) were synthesized using a facile hydrothermal method and ultrasonic technique. Transmission electron micrographs(TEM) showed that Fe3O4nanoparticles(Fe3O4-NPs) grew along the edge of AC. AC/Fe3O4-NPs nanocomposites were further used as an electrochemical electrode, and its electrochemical performance was tested under magnetization and non-magnetization conditions, respectively, in a three-electrode electrochemical device. Micro-magnetic field could improve the electric double-layer capacitance, reduce the charge transfer resistance, and enhance the discharge performance. The capacitance enhancement of magnetized electrode was increased by 33.1% at the current density of 1 A/g, and the energy density was improved to 15.97 Wh/kg, due to the addition of magnetic particles.     

Magnetization-induced double-layer capacitance enhancement in active carbon/Fe3O4 nanocomposites

The effects of magnetic fields on electrochemical processes have made a great impact on both theoretical and practical significances in im-proving capacitor performance. In this study, active carbon/Fe...     

Microbial fuel cell based on Klebsiella pneumoniae biofilm

In this paper we reported a novel microbial fuel cell (MFC) based on Klebsiella pneumoniae (K. pneumoniae) strain L17 biofilm, which can utilize directly starch and glucose to generate electricity. The electrochemical activity of K. pneumoniae and the performance of the MFC were evaluated by cyclic voltammetry, scanning electron microscope (SEM) and polarization curve measurement. The results indicated that an established K. pneumoniae biofilm cells were responsible for the direct electron transfer from fuels to electrode during electricity production. The SEM observation proved the ability of K. pneumoniae to colonize on the electrode surface. This MFC generated power from the direct electrocatalysis by the K. pneumoniae strain L17 biofilm.     

Plasma-Assisted Treatment of Municipal Solid Waste: A Scenario Analysis

Small-scale thermal treatment of municipal solid waste (MSW) was investigated using mass and energy balances based on the assumption of thermodynamic equilibrium. A typical average MSW composition from the literature was used as basis for modelling of a one ton per day waste gasification facility (plant). Syngas production by pyrolysis, stoichiometric O₂ addition and auto-thermal (gasification with oxygen and/or air where no external heat input is required) combustion were considered. These cases were evaluated for production of electricity only, and steam. From purely thermodynamic considerations, it was observed that auto-thermal oxygen gasification produces the most electricity (47.00 kWe) and oxygen plasma gasification produces a positive net amount (4.07 kWe) on a 1 ton per day scale. Although auto-thermal air gasification also produces a net positive amount, the calorific value of the syngas is too low to fuel an internal combustion engine. As expected, the amount of steam generated by the different scenarios is high due to higher process efficiencies. The close-coupled auto-thermal oxygen process proved to be the most efficient. The cost of additional oxygen generation was however not taken into account, and may change the picture significantly.     

阳极底物对微生物燃料电池处理秸秆水解物性能的影响

以双室微生物燃料电池为反应器,铁氰化钾为阴极液,研究污水处理厂活性污泥菌液和玉米秸秆水解液对MFC的产电性能的影响。结果表明,随着阳极中活性污泥菌液体积（1.5、3.0、4.5、6.0 mL）增加,MFC的产电量逐渐增加,当活性污泥的体积增加至7.5 mL时,产电量开始呈下降趋势;玉米秸秆水解液在底物中的浓度为0、10、15、20、30、40 g/L时,电池的稳定电压分别为54、157、248、208、170、146 mV。当阳极活性污泥菌液体积为6 mL、玉米秸秆水解液浓度为15 g/L时,微生物燃料电池的产电性能最佳,此时MFC的功率密度为54.6 mW/m²,内阻为496 Ω。同时,循环伏安曲线（C-V）和交流阻抗曲线（EIS）测试可知,MFC的电极过程由电荷传递和扩散过程共同控制,反应过程受电子传递控制。