湍流边界层拟序结构的实验研究

20世纪60年代后, 先后从流动显示发现了快慢斑、猝发、上升流、下扫流和多种涡结构等湍流边界层的拟序结构. 它们对湍流边界层的摩阻、传热传质和湍动能的产生等特性有重要影响. 涡结构是上述拟序结构的核心, 它影响其它拟序结构的发展和演变. 发卡涡通常被认为是基本涡结构. 发卡涡等涡结构的再生, 是湍流边界层拟序结构能够自持续的必要的因素.壁面低速流上升产生猝发, 是湍流边界层湍能的主要来源; 条件采样是测量猝发频率和其它拟序结构出现频率的重要手段. 流动显示对湍流边界层拟序结构作了大量定性观察, 有许多减阻和增加传热率等应用性研究在此基础上发展起来. 80年代后, 出现了测量湍流边界层的瞬时流速矢量场的多热线法和PIV技术, 三维PIV技术可望将来为湍流边界层的实验研究带来重大进展. 本文评述了流动显示法、多热线法和PIV技术的优点和不足之处, 以及它们在对湍流边界层拟序结构的研究中的贡献.      

EXPERIMENTAL STUDY ON QUANTITATIVE MEASUREMENT OF THREE-DIMENSIONAL STRUCTURE OF HAIRPIN VORTEX BY STEREO-PIV 1)

发卡涡是湍流相干结构研究中最为关注的内容,实现发卡涡三维结构的定量测量并进行流体动力学分析,对深入研究湍流相干结构、实现湍流精准控制等具有重要意义.本研究通过对合成射流装置进行合理控制,使得层流边界层中产生了规则的人造发卡涡结构,进而用体视图像粒子测速仪(Stereo-PIV)锁相实验技术对发卡涡结构所在的三维空间流场进行了定量测量,并得到了一个完整周期内形成的发卡涡三维结构的空间流场. 结果发现,重构所得的三维发卡涡结构质量较高, 实验技术和方案具有可行性.发卡涡结构所在空间流场情况,符合目前人们对于发卡涡、高低速条带、喷射和扫掠事件的常规认识. 此外,对近壁二次流向涡、展向涡量集中区域的展向涡头和强剪切区域、与低速喷射流体相关的汇聚流动和发散流动等有了更细致的认识.同时, 也探讨了"基于二维脉动流场的相关特征去重构发卡涡三维流场"的可行性.为进一步定量探究发卡涡结构的形成演化、不同涡结构的融合及二次诱导等壁湍流相干结构问题提供思路.     

逆向涡对超疏水壁面减阻影响的TRPIV实验研究

超疏水壁面由于具有减阻和自清洁功能而成为国内外减阻和海洋防污等研究领域的热点之一,而20世纪湍流中相干结构的发现为湍流的控制指出新的方向,尤其近壁区涡结构对摩擦阻力贡献很大.利用高时间分辨率粒子图像测速技术,研究了超疏水壁面(SH)以及亲水壁面(PH)湍流边界层中正负展向涡的空间分布特征,研究逆向涡对超疏水壁面近壁区流动结构的影响和超疏水壁面的减阻机理.首先利用空间多尺度局部平均涡量的概念提取壁湍流发卡涡展向涡头(顺向涡)和逆向涡,实现了准确识别涡心并排除小尺度涡的干扰;然后根据检测到的顺向涡和逆向涡流线分布图,发现逆向涡始终处于正向涡的上游和下方,并且对正向涡的进一步发展起抑制作用;最后对两种壁面边界层中逆向涡数量以及出现概率进行对比,发现具有减阻效果的超疏水壁面边界层中出现更多逆向涡.说明逆向涡可抑制上方顺向涡与壁面的强烈剪切,并使靠近壁面的流体加速,从而产生减阻效果;超疏水壁面中涡结构具有更大的β角,使其更好地阻碍了发卡涡头附近强烈的喷射和扫略;超疏水壁面逆向涡出现概率明显大于亲水壁面.这些结果表明:超疏水壁面表现出的减阻特性(Reδ≈13 500,减阻5.8%)与两板产生逆向涡的差异有关.     

Numerical simulation of quasi-streamwise hairpin-like vortex generation in turbulent boundary layer

A mechanism for generation of near wall quasi-streamwise hairpin-like vortex （QHV） and secondary quasi-streamwise vortices （SQV） is presented. The conceptual model of resonant triad in the theory of hydrodynamic instability and direct numerical simulation of a turbulent boundary layer were applied to reveal the formation of QHV and SQV. The generation procedures and the characteristics of the vortex structures are obtained, which share some similarities with previous numerical simulations. The research using resonant triad conceptual model and numerical simulation provides a possibility for investigating and controling the vortex structures, which play a dominant role in the evolution of coherent structures in the near-wall region.     

Vortex structure simulation for supersonic mixing layers using nonlinear PSE method

The method of nonlinear parabolized stability equations (PSE) is applied in the simulation of vortex structures in compressible mixing layer. The spatially-evolving unstable waves, which dominate the vortex structure, are investigated through spatial marching method. The instantaneous flow field is obtained by adding the harmonic waves to basic flow. The results show that T-S waves do not keep growing exponentially as the linear evolution, the energy transfer to high order harmonic modes, and that finally all harmonic modes get saturated due to nonlinear interaction. The mean flow distortion induced by the nonlinear interaction between the harmonic modes and their conjugate harmonic ones, makes great change of the average flow and increases the thickness of mixing layer. PSE methods can well capture the two- and three-dimensional large scale nonlinear vortex structures in mixing layers such as vortex roll-up, vortex pairing, and Λ vortex.     

Antisymmetric quadrupole mode of coherent structures in wall-bounded turbulence

Experiments were conducted in a water tunnel by tomographic time-resolved particle image velocimetry (Tomo-TRPIV). The Reynolds number Re_θ is 2460 on the base of momentum thickness. According to the physical mechanism of the stretch and compression of multi-scale vortex structures in the wall-bounded turbulence, the topological characteristics of turbulence statistics in logarithmic layer were illustrated by local-averaged velocity structure function. During coherent structures bursting, results reveal that the topological structures of velocity gradients, velocity strain rates and vorticities behave as antisymmetric quadrupole modes. A three-layer antisymmetric quadrupole vortex packet confirms that there is a tight relationship between the outer layer and the near-wall layer.     

Tomographic PIV investigation on coherent vortex structures over shark-skin-inspired drag-reducing riblets

Nature has shown us that the microstructure of the skin of fast-swimming sharks in the ocean can reduce the skin friction drag due to the well-known shark-skin effect.In the present study,the effect of shark-skin-inspired riblets on coherent vortex structures in a turbulent boundary layer(TBL) is investigated.This is done by means of tomographic particle image velocimetry(TPIV) measurements in channel fl ws over an acrylic plate of drag-reducing riblets at a friction Reynolds number of 190.The turbulent fl ws over drag-reducing riblets are verifie by a planar time-resolved particle image velocimetry(TRPIV) system initially,and then the TPIV measurements are performed.Two-dimensional(2D) experimental results with a dragreduction rate of around 4.81% are clearly visible over triangle riblets with a peak-to-peak spacing s+of 14,indicating from the drag-reducing performance that the buffer layer within the TBL has thickened;the logarithmic law region has shifted upward and the Reynolds shear stress decreased.A comparison of the spatial topological distributions of the spanwise vorticity of coherent vortex structures extracted at different wall-normal heights through the improved quadrant splitting method shows that riblets weaken the amplitudesof the spanwise vorticity when ejection(Q2) and sweep(Q4) events occur at the near wall,having the greatest effect on Q4 events in particular.The so-called quadrupole statistical model for coherent structures in the whole TBL is verified Meanwhile,their spatial conditional-averaged topological shapes and the spatial scales of quadrupole coherent vortex structures as a whole in the overlying turbulent fl w over riblets are changed,suggesting that the riblets dampen the momentum and energy exchange between the regions of near-wall and outer portion of the TBL by depressing the bursting events(Q2 and Q4),thereby reducing the skin friction drag.     

圆射流中拟序涡配对的数值模拟

用三维涡丝法结合涡丝的增加与合并技术,对不可压圆射流场,数值模拟了在扰动中加入次谐波后流场拟序涡的配对,配对情况与实验结果一致,通过对不同时刻涡量图的比较与分析,给出了次谐波初始强度对涡配对的影响,初始强度越大,涡配对出现越早,涡配对位置越往上游移动;同时还得到了基波与次谐波初始相位差和涡配对的关系,没有相位差时,次谐波增长最快,相位差增加时,涡配对的速度降低。说明控制次谐波的初始强度和基波与次谐波的相位差,能起到控制圆射流剪切层乃至控制整个射流场的目的。     

Tomographic PIV investigation of coherent structures in a turbulent boundary layer flow

Tomographic particle image velocimetry was used to quantitatively visualize the three-dimensional coherent structures in the logarithmic region of the turbulent boundary layer in a water tunnel.The Reynolds number based on momentum thickness is Reθ = 2 460.The instantaneous velocity fields give evidence of hairpin vortices aligned in the streamwise direction forming very long zones of low speed fluid,which is flanked on either side by highspeed ones.Statistical support for the existence of hairpins is given by conditional averaged eddy within an increasing spanwise width as the distance from the wall increases,and the main vortex characteristic in different wall-normal regions can be reflected by comparing the proportion of ejection and its contribution to Reynolds stress with that of sweep event.The pre-multiplied power spectra and two-point correlations indicate the presence of large-scale motions in the boundary layer,which are consistent with what have been termed very large scale motions(VLSMs).The three dimen-sional spatial correlations of three components of velocity further indicate that the elongated low-speed and highspeed regions will be accompanied by a counter-rotating roll modes,as the statistical imprint of hairpin packet structures,all of which together make up the characteristic of coherent structures in the logarithmic region of the turbulent boundary layer(TBL).     

Analytical solutions for thermal forcing vortices in boundary layer and its applications

Using the Boussinesq approximation, the vortex in the boundary layer is assumed to be axisymmetrical and thermal-wind balanced system forced by diabatic heating and friction, and is solved as an initial-value problem of linearized vortex equation set in cylindrical coordinates. The impacts of thermal forcing on the flow field structure of vortex are analyzed. It is found that thermal forcing has significant impacts on the flow field structure, and the material representative forms of these impacts are closely related to the radial distribution of heating. The discussion for the analytical solutions for the vortex in the boundary layer can explain some main structures of the vortex over the Tibetan Plateau.     

混合层强化混合的数值研究

受 Ｗａｎｇ ＆ Ｆｉｅｄｌｅｒ（１９９７）的实验的启发，采用高阶精度的差分格式，通过数值模拟的方法，研究了二维混合层及限于两平板间的二维混合层（二维受限混合层）入口处加振动对提高混合层混合效率的作用．计算结果表明：对二维混合层，振动的频率越低，在混合层中产生的大尺度涡结构的尺度越大，在频率很低时，涡具有相似性；对限于两平板间的二维混合层，在一定的振动频率下，混合层中产生的涡较大而且破碎得也较好，这将有利于混合．这一结论与 Ｗａｎｇ ＆ Ｆｉｅｄｌｅｒ（１９９７）的实验观测到的结果是一致的．     

金属丝壁面加热湍流标度律的实验研究

通过在固壁表面的平板湍流边界层沿流向平行放置若干通电加热的金属细丝,在平板表面形成沿展向周期性分布的温度场,利用该温度场引起的空气热对流,在湍流边界层近壁区域产生一组沿湍流边界层展向周期分布的流向涡结构。对壁湍流小尺度结构标度律统计特性的研究表明,金属丝加热后形成的规则流向涡结构将壁湍流各种尺度湍涡结构不规则的脉动有序地组织起来,增强了湍流小尺度结构的层次结构相似性,减小了壁湍流中小尺度结构的间歇性和奇异性,抑制了壁湍流中奇异的湍涡结构。     

Large eddy simulation of flows after a bluff body: Coherent structures and mixing properties

This paper performs large eddy simulations (LES) to investigate coherent structures in the flows after the Sydney bluff-body burner, a circular bluff body with an orifice at its center. The simulations are validated by comparison to existing experimental data. The Q function method is used to visualize the instantaneous vortex structures. Three kinds of structures are found, a cylindrical shell structure in the outer shear layer, a ring structure and some hairpin-like structures in the inner shear layer. An eduction scheme is employed to investigate the coherent structures in this flow. Some large streaks constituted by counter-rotating vortices are found in the outer shear layer and some well-organized strong structures are found in the inner shear layer. Finally, the influences of coherent structures on scalar mixing are studied and it is shown that scalar in the recirculation region is transported outward by coherent structures.     

壁面加热湍流相干结构的子波分析实验研究

通过在平板湍流边界层沿流向固壁表面平行放置若干条通电加热的金属细丝,在平板表面形成沿展向周期性分布的温度场,利用该温度场引起的空气热对流,在湍流边界层近壁区域产生一组沿湍流边界层展向周期分布的大尺度流向涡结构,改变了平板湍流边界层中不同尺度结构及其能量分布。采用对壁湍流多尺度结构的子波分析表明,在湍流边界层近壁区域产生规则的流向涡结构将壁湍流各种尺度湍涡结构不规则的脉动有序地组织起来,抑制了壁湍流各种尺度湍涡结构脉动,特别抑制了能量最大尺度湍涡结构的脉动,减小由于湍流脉动引起的在湍流边界层法向和展向的动量和能量损耗,从而减小了湍流的阻力。     

Aerodynamic unstable critical wind velocity for three-dimensional open cable-membrane structures

The aerodynamic unstable critical wind velocity for three-dimensional open cable-membrane structures is investigated. The geometric nonlinearity is introduced into the dynamic equilibrium equations of structures. The disturbances on the structural surface caused by the air flow are simulated by a vortex layer with infinite thickness in the structures. The unsteady Bernoulli equation and the circulation theorem are applied in order to express the aerodynamic pressure as the function of the vortex density. The vortex density is then obtained with the vortex lattice method considering the coupling boundary condition. From the analytical expressions of the unstable critical wind velocities, numerical results and some useful conclusions are obtained. It is found that the initial curvature of open cable-membrane structures has clear influence on the critical wind velocities of the structures.     

Study of periodically excited bubbly jets by PIV and double optical sensors

Interactions between large coherent structures and bubbles in two-phase flow can be systematically observed in a periodically excited bubbly jet. Controlled excitation at fixed frequency causes large eddy structures to develop at regular intervals. Thus, interactions between large vortices and bubbles can be studied with PIV and double optical sensors (DOS) using phase-averaging techniques. A number of results on the time and space dependence of velocities and void fractions are presented revealing physical interactions between the liquid flow field and bubble movement as well as feedbacks from bubble agglomeration on the development of flow structures. A clear indication of bubble trapping inside the vortex ring is the generation of a bubble ring that travels with the same velocity as the vortex ring. The DOS results indicate clustering of the bubbles in coherent vortex structures, with a periodic variation of void fraction during the excitation period.     

关于湍流拟序结构的思考

本文在简要地回顾了30多年来湍流拟序结构研究的进展之后,评述了目前拟序结构研究的动态。笔者强调准确的湍流场数据库建立的重要性,它是定量描述和研究拟序结构的基础。笔者评述了关于拟序结构目前流行的几种观点和方法,认为应当把研究拟序结构的动力学作为我们研究的目标。笔者深信准确掌握拟序结构的动力学规律,对于预测和控制湍流将有极大的推动。      

Dynamics of interaction modes in excited annular jets

Evolution of coherent structures and their interaction dynamics are educed in the near field of an acoustically excited basic annular jet using conditional sampling technique based on a multiple triggering criterion to detect the two dominating modes of structure pattern. Acoustic excitation is applied with an aim to better organize the phase alignment of initial rolling and pairing process in the outer shear layer. Negligible modification of the time-averaged flow field results from the excitation. The educed coherent vorticities show that the two modes of evolution are due to the corresponding two modes of shedding pattern of the wake structures from the centerbody, namely the mode one wake and the mode zero wake. In both modes, the shear-layer mode jet vortex rings in the outer layer are perturbed by the shedding of wake structures in the inner region and interaction involving primary merging of three successive jet vortex rings or their partial circumferential sections is found. This results in the formation of wake-induced structures of the corresponding mode pattern, which possesses concentration of coherent vorticity and fluid circulation over a large spatial extent at 1 < x/D < 2. Secondary interactions, such as vortex tearing, are also observed.     

可压缩燃烧反应转捩混合层直接数值模拟

针对三维时间发展可压缩氢/氧非预混燃烧反应平面自由剪切混合层,采用5阶迎风/6阶对称紧致混合差分格式以及3阶显式Runge-Kutta时间推进方法,直接数值模拟了伴随燃烧产物生成和反应能量释放, 流动受扰动激发失稳并转捩的演化过程. 在转捩初期, 获得了${\it\Lambda}$涡、马蹄涡等典型的大尺度拟序结构,观察到了流动失稳后发生双马蹄涡三维对并的现象, 大尺度结构呈较好的对称性.在流动演化后期, 大尺度结构逐次破碎形成小尺度结构, 混合层进入转捩末期,呈明显的不对称性.