基于粗时分复用技术的光纤光栅传感系统研究

充分利用光纤光栅传感网络的频域和时域资源,综合考虑了光栅传感环境特点、传感点铺设和维护等因素,提出了一种新型的基于粗时分复用的TDM/WDM光纤传感网络设计方案。先按时分复用方式将光纤传感环境划分成不同时延的传感域,再将域内传感点按波分复用方式进行波分复用,并结合网络拓扑结构分析了网络中的影响测量结果的主要因素。方案引入了传感域和时延容差概念,可以放宽对传感点精确位置的要求,可对传感网进行分域管理,便于替换死亡的传感器,更加方便、简洁地实现大容量光纤光栅传感系统,可依据器件具体情况灵活分配传感域内域外的传感器复用数,使每个传感单元的传感成本显著降低。     

光栅周期包含的Bragg层数对Bragg型凹面衍射光栅的影响

单个衍射光栅周期所包含的Bragg周期层数是连续Bragg齿型凹面衍射光栅的主要参数之一,该参数可改变光栅齿结构,对凹面衍射光栅的分辨力.自由光谱范围及衍射效率有重要影响.本文通过理论分析与仿真模拟,对比了4种不同层数的Bragg型凹面衍射光栅的特性参数.研究结果表明:在衍射光栅尺寸不变的情况下,改变单个光栅周期包含的Bragg周期层数不会显著提高器件主衍射级次的分辨力;单个光栅周期包含的Bragg周期层数与光栅可衍射的级次数成正相关.单周期层数的Bragg凹面衍射光栅的主衍射级次效率最高,其可衍射的级次数最少,且其他衍射级次分散的能量最少;增加单个光栅周期所包含的Bragg周期层数会降低主衍射级次的自由光谱范围.该研究对于设计低插损、高分辨率、宽工作波段的波分复用器或光栅光谱仪具有重要的指导意义.     

Bragg反射齿型平面凹面衍射光栅性能研究

本文基于Bragg反射光栅是一维光子晶体的一种特例结构, 提出利用一维光子晶体理论进行Bragg衍射光栅的设计并对其性能进行研究分析. 根据一维光子晶体理论, 建立了罗兰圆结构的凹面椭圆Bragg蚀刻衍射光栅, 研究了TE/TM模式下器件的分光特性以及入射角度改变对器件角色散造成的影响; 同时, 文中对比了空气介质型和金属铝线型椭圆Bragg蚀刻衍射光栅的光学性能. 研究结果表明: 选择合适的器件参数, 可以实现TE/TM模式下1.465-1.615 μm范围内波长衍射效率在95% 以上, 且空气介质型结构光栅的通道均匀性要优于金属铝线型结构光栅; 入射角在30°-60°范围内变化时, 相同入射角度下, TM模式下器件角色散大于TE模式. 基于Bragg衍射光栅设计的波分复用器是一种尺寸小、衍射效率高的新型EDG 波分复用器, 为未来密集型EDG波分复用器发展提供了一种新的设计思路.     

一种不等带宽光学梳状滤波器

提出了一种新型—Michelson—三面镜FabryPerot型50GHz不等带宽光学梳状滤波器设计方案,分析和模拟表明:该器件将一路信道间隔为50GHz的输入信号分离成信道间隔为100GHz的奇偶两路输出信号,其中在3dB处,奇数信道带宽大于30GHz用于10Gb/s传输,偶数信道带宽大于60GHz用于40Gb/s传输对于将来的40Gb/s系统,该器件具有优势.     

Multi-wavelength generation of L-band brillouin/erbium fibre laser

In this paper, the operation of the Brillouin/erbium fibre laser (BEFL) in the long wavelength band (L-band or 1565–1625 nm) is experimentally demonstrated. The Stokes frequency is shifted 10 GHz from its Brillouin pump (BP) from 1598 to 1612 nm for the single wavelength BEFL. Multiple wavelength generation in the BEFL is realised by adding two 3-dB couplers, which are joined in a reverse-S arrangement to take a portion of the generated BEFL signal and re-inject it into the single-mode fibre (SMF) to seed a cascaded BEFL line in the same direction as the first BEFL line. Twenty lines including the anti-Stokes are obtained with a maximum BP and 980-nm pump power of 8.8 and 92 mW, respectively. The L-band BEFL has the potential to be used in future wavelength division multiplexing (WDM) communication system.     

The L-band EDFA of high clamped gain and low noise figure implemented using fiber Bragg grating and double-pass method

The L-band erbium-doped fiber amplifier (EDFA) of low noise figure and high clamped-gain using gain-clamped and double-pass configuration is presented in this paper. A total of five different configurations of EDFAs by reflection scheme with single forward pumping schemes are examined and compared here. Among these configurations, we first find the configuration of 1480-nm pumped L-band EDFA with optimum gain and noise figure value. To further minimize the gain variation, a fiber Bragg grating (FBG) with 1615-nm center wavelength and 1-nm bandwidth is determined and added in double-pass L-band EDFA. The gain variation and maximum noise figure of EDFA while channel dropping is investigated. As the number of channel dropping from 32 to 4, the L-band type-A EDFA keep the variation of gain within 2.9 dB and the maximum noise figure below 5 dB with each channel’s input power of −23 dBm.     

Blocking probability analysis of survivable routing in WDM optical networks with/without sparse-wavelength conversion

In this paper, a new algorithm for wavelength assignment has been proposed and its performance is evaluated in terms of blocking probability and fairness. It has been shown that the proposed algorithm offers the least blocking probability. The blocking performance of wavelength division multiplexing (WDM) network has been analyzed for the network having 10 nodes and for varying loads. As the load per link (in Erlangs) increases, the blocking probability increases. The result shows that the performance of first-fit algorithm is better than random algorithm whereas the proposed algorithm offers the least blocking.     

相位修正的耦合模理论用于计算光纤Bragg光栅法布里-珀罗腔透射谱

基于光纤Bragg光栅(FBG)反射复振幅相移对FBG法布里-珀罗腔透射谱的影响,分析了传统耦合模理论计算均匀FBG反射复振幅相移产生误差的原因.引入折射率分布初始相位参数描述FBG折射率分布纵向的微小偏移,用真实的反透射系数代替简明形式的反透射系数,对传统耦合模理论进行了修正,增加了与折射率分布初始相位参数有关而与波长无关的相位因子.在此基础上进一步对计算非均匀FBG的传输矩阵法的相位进行了修正.修正后的快速计算结果用于FBG法布里-珀罗腔透射谱的计算,可反映折射率分布初始相位参数对透射峰波长位置的影响,与Rouard 算法及实验值均有较好的一致性. 关键词： 光纤Bragg 光栅 法布里-珀罗腔 耦合模理论     

Short-scan interferometric interrogation and multiplexing of fibre Bragg grating sensors

We describe an interferometric technique for the demodulation of serial fibre Bragg grating sensor arrays, yielding absolute measurement of the individual grating mean wavelengths. The composite beam reflected from the array illuminates a scanning Michelson interferometer but, in contrast to spectral measurement by Fourier Transform Spectroscopy, our technique requires an OPD scan far shorter than the coherence length of the grating reflections. The technique is based on the high-resolution measurement of the phases of the complex analytic signals and of the relationship of these phases to interferometric delay. The analytic signals are derived via the Hilbert transform, allowing frequency domain filtering of individual signals within the signal processing. The technique has yielded a resolution of 0.007 nm for an OPD scan of 1.2 mm.     

A Pixelized Variable Optical Attenuator Using Liquid Crystal on Silicon Technology for Tunable Filters

We apply liquid crystal on silicon (LCOS) in 0.8-$mUm standard complementary metal-oxide semiconductor (CMOS) technology to demonstrate a low-cost, high-performance pixelized liquid crystal variable optical attenuator (VOA) with pulse width modulation. We then build a prototype tunable filter by using this VOA along with a grating in the Littrow configuration. With the application of 5-V pulse width modulation, the proposed VOA achieves a 5.6-dB insertion loss, a dynamic range of more than 20 dB, a 50-GHz channel spacing capability, and a polarization-dependent loss (PDL) of less than 0.6 dB at 15-dB attenuation. Our VOA is suitable for applications such as dynamic channel gain equalizers, channel-blocking filters, sub-components of re-configurable add-drop modules, and wavelength selectors.     

Investigations on order and width of RZ super Gaussian pulse in different WDM systems at 40 Gb/s using dispersion compensating fibers

In optical wavelength division multiplexed (WDM) systems the dispersion management is a key issue. In optical systems a lot of research is going on to reduce dispersion by selecting proper dispersion compensating techniques and proper modulation format for input data. One way to reduce dispersion is by using dispersion compensating fibers in the WDM systems. This paper analyzes the use of RZ super Gaussian pulse inputs for different WDM systems i.e. for conventional, dense and ultra dense WDM systems employing dispersion compensating fibers. The pulse width and the order of the RZ super Gaussian pulse was varied to evaluate the performance at 40 Gb/s. The experiment showed that to get minimum BER, pulse width of 7.5 ps and 10 ps along with third-order RZ super Gaussian pulse were found suitable and recommended to be used.     

A New 1×K Tunable Multi-wavelength Router and its Features

1　Ｉｎｔｒｏｄｕｃｔｉｏｎ　　Ｗａｖｅｌｅｎｇｔｈｒｏｕｔｅｒｓ (ＷＲｓ)ａｒｅｋｅｙｄｅｖｉｃｅｓｉｎｗａｖｅｌｅｎｇｔｈ ｒｏｕｔｉｎｇａｌｌ ｏｐｔｉｃａｌｎｅｔｗｏｒｋｓ.Ｒｅｃｅｎｔｌｙ ,ｒｅｓｅａｒｃｈｆｏｒｔｈｅＷＲｓｈａｓｂｅｅｎｏｎｅｏｆｈｏｔｓｐｏｔｓｉｎｗａｖｅｌｅｎｇｔｈｄｉｖｉｓｉｏｎｍｕｌｔｉｐｌｅｘｉｎｇ (ＷＤＭ )ｎｅｔｗｏｒｋｔｅｃｈｎｏｌｏｇｉｅｓ[1,2 ] .Ｂｙｄｉｆｆｅｒｅｎｔｒｏｕｔｉｎｇｐａｔｔｅｒｎｓ,ｔｈｅＷＲｓｃａｎｂｅｄｉｖｉｄｅｄｉｎｔｏｔｗｏｋｉｎｄ…     

A New 1×K Tunable Multi-wavelength Router and its Features

Tunable wavelength routers (TWRs) for multiple wavelength selection are key devices in dynamic wavelength-routing wavelength division multiplexing (WDM) networks. In this paper, by cascading conventional 2×2 TWRs, a new 1×K TWR is proposed for large-scale dynamic wavelength-routing WDM networks. When the cascading numbers are smaller, the 1×K TWR can be directly applied to networking WDM networks. When the cascading numbers are larger, the 1×K TWR can be carried out by the integrating method and be extensively used to networking various multi-wavelength optical networks by the way of “EDFA+TWR”. Though the cascading method proposed is based on the acousto-optic TWRs, it can be also applied to cascading other kinds of TWRs.     

Twin-Ring Optical WDM-MAN Enabling Triple-Hierarchical Reconfigurations and Quadruple-Shared Protections

An optical wavelength division multiplexing metro access network is proposed in this paper. With the design of flexible distribution node (FDN), three kinds of reconfigurable networks can be flexibly built to achieve intra- and inter-optical network unit (ONU)-direct communications. With the adoption of multiple tangent twin-ring topologies, four-level shared protections covering both feeder and distribution fibers are also supported. Moreover, the network can be smoothly expanded by adding express ONUs connected to FDNs. Thus, the network can not only achieve capacity increasing but also support full-duplex reconfigurable communication. A reconfigurable transmission algorithm is also set to avoid wavelengths conflict.     

低差分模式时延少模光纤的有限元分析及设计

针对少模光纤展开研究, 利用Comsol软件计算其模场分布、有效折射率, 进而分析光纤的差分模式时延. 通过分析不同结构参量对模式数量和差分模式时延的影响, 设计出了两种低差分模式时延的少模光纤, 即带有外下陷的渐变式光纤和多阶少模光纤. 波长在1530–1570 nm 范围内, 带有外下陷的渐变式光纤支持四模传输, LP₁₁, LP₂₁, LP₀₂模式的差分模式时延的绝对值小于0.015 ps·m^-1; 多阶少模光纤支持两模传输, LP₁₁的差分模式时延低于0.185 ps·m^-1. 两种少模光纤均具有良好的差分模式时延特性, 适于在模分复用技术中应用.     

用统一耦合模理论分析含布拉格光栅的对称光纤耦合器的传输特性

利用由麦克斯韦方程组直接导出的统一耦合模理论分析各类型的含布拉格光栅的对称光纤耦合器的传输特性。与以前发表的分析方法不同,对于含布拉格光栅的耦合区域,统一耦合模型理论同时考虑了布拉格光栅和耦合的耦合作用。模拟结果证明它能精确地模拟和解释各种类型的含布拉格光栅的对称光纤耦合器的有关实验现象。     

Numerical Analysis of Highly Birefringent Photonic Crystal Fibers with Bragg Reflectors

We analyze theoretically the coupling properties of Bragg gratings written in highly birefringent photonic crystal fibers with doped core and show how they can be tuned by the parameters of a microstructured fiber. We apply the coupled mode theory combined with a fully vectorial mode solver based on the plane-wave method. The results indicate large differences in interaction with the grating for the two linearly polarized fundamental modes. We show fiber designs, which provide single-mode operation with high birefringence and at the same time a high coupling efficiency of the grating. Such features can be used in fiber sensors, fiber laser configurations or to introduce a polarization dependent feedback in a long external cavity system with a semiconductor laser.     

正交多载波产生技术研究

相干且频率锁定的正交多载波光源产生技术在光通信领域有着诸多应用,能广泛用于微波光子学、全光信号处理以及波分复用(WDM)技术和正交频分复用(OFDM)技术.互联网数据业务的快速增长使得超宽带大容量骨干网传输技术越来越受到世界各国的重视,而要实现Tb/s超大容量传输,目前使用的最主要的方法是光的波分复用(WDM)或正交频分复用(OFDM)技术.作为实现光WDM或OFDM的一项关键技术,相干和频率锁定的正交多波长光源技术引起了国内外各大科研机构的强烈关注.介绍了国内外多载波技术的现状以及多载波产生的多种方案,并对每一个方案进行了对比分析,为未来的研究提供了一些参考.     

输出功率动态均衡的WDM模块的分析与研制

研究了以MEMS衰减器为核心的节点光功率均衡方案,在此基础上,研制出了输出功率动态均衡的WDM模块。并对模块进行了测试,其主要性能指标都达到了设计要求。适合在光通信系统评估、WDM系统功率均衡等场合使用。     

Algorithm for Scheduling Variable-Length Messages in WDM Networks

In this paper, we develop and analyze a simple algorithm for scheduling variable length messages in WDM networks with a passive star coupler. We base our schemes on a star topology with centralized control and use a scheduling algorithm similar to the process management in UNIX system. Every node and message have a scheduling priority associated with them. By comparing our algorithm with random select algorithm, we find that significant improvement in performance can be achieved with very little extra cost.