Acetamide, a challenge to theory and experiment? On the molecular structure, conformation, potential to internal rotation of the methyl group and force fields of free acetamide as studied by quantum chemical calculations

The molecular geometry has been optimized without any constraints using different basis sets and levels of theory as: Hartree-Fock with basis sets 6–31+G**, 6–311++G**, cc-pVTZ and aug-cc-pVTZ, MP2 with basis sets 6–311++G** and cc-pVTZ, MP3 with basis set 6–311++G**, and density functional theory with basis sets 6–311++G** and cc-pVTZ. Small basis sets up to 6-31G predict the syn conformation of the methyl group to be the most stable conformation. Larger basis sets predict an unsymmetrical conformation with one of the H atoms perpendicular to the amide skeleton or an anti-like conformation. Dunnings correlation consistent polarized valence triple zeta, cc-pVTZ, basis set including MP2 predict two conformations, one perpendicular and one anti to be the most stable. The DFT calculations predict anti-like conformations. The most accurate calculations predict anti-like conformations which have not been predicted previously. The vibrational frequencies have been calculated for several basis sets and compared to the observed frequencies. The wagging frequency of the NH₂ is very dependent on the basis sets and levels of theory. Most calculations predict a planar NH₂ group in agreement with experiment. A scaled molecular force field has been determined by fitting the calculated frequencies to the observed ones for the perpendicular conformation using MP2/cc-pVTZ. The barrier heights for the methyl group have been calculated. The rotational constants, I_A + I_B − I_C values and dipole moments are compared with experimental values.     

硝酸甲与硝酸乙酯的结构、振动频率和热力学性质的密度函数 理论(DFT)研究

用密度函数理论(DFT)的BLYP和B3LYP方法,取6-31G,6-31G^*,6-31G^*^*,6-311G,6-311G^*和6-311G^*^*六种基组,对硝酸甲酯和硝酸乙酯的几何构型和红外振动频率进行了计算研究.结果表明,B3LYP方法在采用极化基组(6-31G^*,6-31G^*^*,6-311G^*和6-311G^*^*)时计算得到的结果均较好,适用于硝酸酯类化合物的研究.而BLYP方法无论采用何种基组均不适用;运用校正后的B3LYP/6-31G^*频率(校正因子0.975)计算得到的热力学性质(C^o~p,H^o和S^o)与实验结果较吻合。     

Molecular recognition in molecular tweezers systems: quantum-chemical calculation of NMR chemical shifts

Quantum-chemical calculations for molecular tweezers systems are presented, where the focus is not only on the recognition process in the host-guest systems, but on the self aggregation of the tweezers host as well. Such intermolecular interactions influence the corresponding NMR spectra strongly by up to 6 ppm for proton chemical shifts, since ring-current effects are particularly important. The quantum-chemical results allow one to reliably assign the spectra and to gain information both on the structure and on the importance of intra- and intermolecular interactions. In addition, we study the accuracy of a variety of density functionals for describing the present host-guest systems, where we observe a considerable underestimation of ring-current effects on (1)H NMR chemical shifts at the density functional theory (DFT) level using smaller basis sets such as 6-31G**, so that larger bases like TZP are required. This stands in contrast to the behavior of the Hartree-Fock scheme, where small basis sets, such as 6-31G**, provide reliable (1)H NMR shieldings for molecular tweezers systems.     

Theoretical studies of host-guest interaction in gas hydrates

Ab initio calculations and atoms-in-molecules (AIM) analysis have been used to investigate the host-guest interaction in dodecahedral water cages using a variety of guest species that include monatomic (He, Ne, Ar, Kr, and Xe), diatomic (CO, H(2), N(2), O(2), and NO), triatomic (CO(2), NO(2), and O(3)), and polyatomic (CH(4) and NH(3)) molecules. Geometry optimization for the guest species, host cage, and their complexes was carried out using the second order M?ller-Plesset perturbation method with the 6-31G** basis set. Single point energy calculations using the same method but different basis sets (6-31++G**, 6-311++G**, aug-cc-pVDZ, and aug-cc-pVTZ) were carried out for the MP2/6-31G** optimized geometries. The interaction energy between the guest species and the host cage has been obtained in the complete basis set limit by basis set extrapolation.     

HArF和HNO二聚体相互作用氢键的理论研究

The hydrogen bonding interaction of 1:1 dimer formed between HNO and HArF molecule has been completely investigated in the present study using Second-order M?ller-Plesset Perturbation (MP2) method in conjunction with 6-311+G**, 6-311++G** and 6-311++G(2d,2p) basis sets. The standard and CP-corrected calculations have been employed to determine the equilibrium structures, the vibrational frequencies and interaction energies. The interaction energies of the dimers were also calculated at G2MP2 level. Two stable structures are found as the minima. Dimer I(H···F)is a five-membered cyclic hydrogen bonded structure and is more stable than the Dimer II(H···O). The blue-shifted N-H···F hydrogen bond is confirmed with standard and CP-corrected calculations by the MP2 and DFT methods in conjunction with different basis sets. The results obtained at MP2 in conjunction with different basis sets show there is a red-shifted hydrogen bond (Ar-H···O) in the Dimer II(H···O). The topological and electronic properties, the origin of red- and blue-shifted hydrogen bonds were investigated at MP2/6-311++G(2d,2p) with CP corrected calculations. From the NBO analysis, the reasonable explanations for the red- and blue-shifted hydrogen bonds were proposed.     

A computational study of intramolecular proton transfer in gaseous protonated glycine

The minimum energy paths for intramolecular proton transfer between the amino nitrogen and carbonyl oxygen atoms in gaseous protonated glycine were estimated at the Hartree-Fock (HF) and second-order M?ller-Plesset Perturbation (MP2) levels of theory. Potential energy profiles and their associated reactant, transition state, and product species calculated at the MP2/6-31G* level were shown to differ significantly from those obtained at the HF/6-31G* level. Effects of electron correlation and basis functions on the calculated geometries and energies of relevant species were examined at the HF, MP2, MP4, CCSD, and B3LYP levels using the 6-31G*, 6-31G**, 6-31+G**, 6-311+G**, 6-31+G(2d,2p), 6-311+G(3df,2p), cc-pVDZ, aug-cc-pVDZ, and cc-pVTZ basis sets. The HF and MP2 optimized levels with the 6-31G*, 6-31G**, 6-31+G**, and 6-311+G** bases were used to calculate the thermodynamic and kinetic properties of the proton transfer reaction at 298.15 K and 1 atm, which include enthalpy, entropy, Gibbs free energy, equilibrium constant, potential energy barriers, tunneling transmission coefficients, and rate constants. Results indicate that the proton in a carbonyl O-protonated glycine undergoes a rapid migration to the amino nitrogen atom, while the reverse process is extremely unfavorable. The objective of this work is to develop practical theoretical procedures for studying proton transfer reactions in amino acids and peptides and to assemble physical data from these model calculations for future references.     

Scaling factors for vibrational frequencies and zero-point vibrational energies of some recently developed exchange-correlation functionals

The scaling factors for the vibrational frequencies and zero-point vibrational energies evaluated at various combinations of recently developed exchange-correlation functionals and various basis sets are reported. The exchange-correlation functionals considered are B972, B98, HCTH, OLYP, O3LYP, G96LYP, PBE0 and VSXC functionals; the basis sets employed are 3-21G, 6-31G*, 6-31G**, 6-31+G, 6-311G*, 6-311G**, 6-311G(df,p), 6-311+G(df,p), cc-pVDZ and aug-cc-pVDZ. The experimental harmonic frequencies of 122 small molecules and the zero-point vibrational energies of 39 small molecules are used to determine the scaling factors through the least-square fitting procedure. It was found that the scaling factors do not depend significantly on the basis sets considered. The vibrational frequency scaling factors evaluated by using the B98 and PBE0 functionals are recommended on the basis of smallest root mean square error. The zero-point vibrational energy scaling factors evaluated from the B972 functional with Pople's double-zeta basis set and the HCTH functional with Pople's triple-zeta basis set are recommended on the basis of smallest root mean square error.     

Multipole electrostatics in hydration free energy calculations

Hydration free energy (HFE) is generally used for evaluating molecular solubility, which is an important property for pharmaceutical and chemical engineering processes. Accurately predicting HFE is also recognized as one fundamental capability of molecular mechanics force field. Here, we present a systematic investigation on HFE calculations with AMOEBA polarizable force field at various parameterization and simulation conditions. The HFEs of seven small organic molecules have been obtained alchemically using the Bennett Acceptance Ratio method. We have compared two approaches to derive the atomic multipoles from quantum mechanical calculations: one directly from the new distributed multipole analysis and the other involving fitting to the electrostatic potential around the molecules. Wave functions solved at the MP2 level with four basis sets (6-311G*, 6-311++G(2d,2p), cc-pVTZ, and aug-cc-pVTZ) are used to derive the atomic multipoles. HFEs from all four basis sets show a reasonable agreement with experimental data (root mean square error 0.63 kcal/mol for aug-cc-pVTZ). We conclude that aug-cc-pVTZ gives the best performance when used with AMOEBA, and 6-311++G(2d,2p) is comparable but more efficient for larger systems. The results suggest that the inclusion of diffuse basis functions is important for capturing intermolecular interactions. The effect of long-range correction to van der Waals interaction on the hydration free energies is about 0.1 kcal/mol when the cutoff is 12?, and increases linearly with the number of atoms in the solute/ligand. In addition, we also discussed the results from a hybrid approach that combines polarizable solute with fixed-charge water in the HFE calculation.     

Correlated ab initio quantum chemical calculations of di- and trisaccharide conformations

High level correlated quantum chemical calculations, using MP2 and local MP2 theory, have been performed for conformations of the disaccharide, beta-maltose, and the trisaccharide, 3,6-di-O-(alpha-D-mannopyranosyl)-alpha-D-mannopyranose. For beta-maltose, MP2 and local MP2 calculations using the 6-311++G** basis set are in good agreement, predicting a global minimum gas-phase conformation with a counterclockwise hydrogen bond network and the experimentally-observed intersaccharide hydrogen bonding arrangement. For conformations of 3,6-di-O-(alpha-D-mannopyranosyl)-alpha-D-mannopyranose, MP2/6-311++G**, and local MP2/6-311++G** calculations do not provide a consensus prediction of relative energetics, with the MP2 method finding large differences in stability between extended and folded trisaccharide conformations. Local MP2 calculations, less susceptible to intramolecular basis set superposition errors, predict a narrower range of trisaccharide energetics, in line with estimates from Hartree-Fock theory and B3LYP and BP86 density functionals. All levels of theory predict compact, highly hydrogen-bonded conformations as lowest in energy on the in vacuo potential energy surface of the trisaccharide. These high level, correlated local MP2/6-311++G** calculations of di- and trisaccharide energetics constitute potential reference data in the development and testing of improved empirical and semiempirical potentials for modeling of carbohydrates in the condensed phase.     

A combined semiempirical-DFT study of oligomers within the finite-chain approximation, evolution from oligomers to polymers

A computationally cheap approach combining time-independent density functional theory (TIDFT) and semiempirical methods with an appropriate extrapolation procedure is proposed to accurately estimate geometrical and electronic properties of conjugated polymers using just a small set of oligomers. The highest occupied molecular orbital-lowest unoccupied molecular orbital gap (HLG) obtained at a TIDFT level (B3PW91) for two polymers, trans-polyacetylene--the simplest conjugated polymer, and a much larger poly(2-methoxy-5-(2,9-ethyl-hexyloxy)-1,4-phenylenevinylene (MEH-PPV) polymer converge to virtually the same asymptotic value than the excitation energy obtained with time-dependent DFT (TDDFT) calculations using the same functional. For TIDFT geometries, the HLG is found to converge to a value within the experimentally accepted range for the band gap of these polymers, when an exponential extrapolation is used; however if semiempirical geometries are used, a linear fit of the HLG versus 1/n is found to produce the best results. Geometrical parameters are observed to reach a saturation value in good agreement with experimental information, within the length of oligomers calculated here and no extrapolation was considered necessary. Finally, the performance of three different semiempirical methods (AM1, PM3, and MNDO) and for the TIDFT calculations, the performance of 7 different full electron basis sets (6-311+G**, 6-31+ +G**, 6-311+ +G**, 6-31+G**, 6-31G**, 6-31+G*, and 6-31G) is compared and it is determined that the choice of semiempirical method or the basis set does not significantly affect the results.     

Intermolecular potentials of the methane dimer calculated with Møller-Plesset perturbation theory and density functional theory

We have calculated the intermolecular interaction potentials of the methane dimer at the minimum-energy D(3d) conformation using the Hartree-Fock (HF) self-consistent theory, the correlation-corrected second-order M?ller-Plesset (MP2) perturbation theory, and the density functional theory (DFT) with the Perdew-Wang (PW91) functional as the exchange or the correlation part. The HF calculations yield unbound potentials largely due to the exchange-repulsion interaction. In the MP2 calculations, the basis set effects on the repulsion exponent, the equilibrium bond length, the binding energy, and the asymptotic behavior of the calculated intermolecular potentials have been thoroughly studied. We have employed basis sets from the Slater-type orbitals fitted with Gaussian functions (STO-nG) (n=3-6) [Quantum Theory of Molecular and Solids: The Self-Consistent Field for Molecular and Solids (McGraw-Hill, New York, 1974), Vol. 4], Pople's medium size basis sets of Krishnan et al. [J. Chem. Phys. 72, 650 (1980)] [up to 6-311++G(3df,3pd)] to Dunning's correlation consistent basis sets [J. Chem. Phys. 90, 1007 (1989)] (cc-pVXZ and aug-cc-pVXZ) (X=D, T, and Q). With increasing basis size, the repulsion exponent and the equilibrium bond length converge at the 6-31G** basis set and the 6-311++G(2d,2p) basis set, respectively, while a large basis set (aug-cc-pVTZ) is required to converge the binding energy at a chemical accuracy (approximately 0.01 kcal/mol). Up to the largest basis set used, the asymptotic dispersion coefficient has not converged to the destined C6 value from molecular polarizability calculations. The slow convergence could indicate the inefficacy of using the MP2 calculations with Gaussian-type functions to model the asymptotic behavior. Both the basis set superposition error (BSSE) corrected and uncorrected results are presented to emphasize the importance of including such corrections. Only the BSSE corrected results systematically converge to the destined potential curve with increasing basis size. The DFT calculations generate a wide range of interaction patterns, from purely unbound to strongly bound, underestimating or overestimating the binding energy. The binding energy calculated using the PW91PW91 functional and the equilibrium bond length calculated using the PW91VP86 functional are close to the MP2 results at the basis set limit.     

Intermolecular potentials of the silane dimer calculated with Hartree-Fock theory, Møller-Plesset perturbation theory, and density functional theory

We have calculated the intermolecular interaction potentials of the silane dimer at the D3d conformation using the Hartree-Fock (HF) self-consistent theory, the correlation-corrected second-order M?ller-Plesset (MP2) perturbation theory, and the density functional theory (DFT) with 108 functionals chosen from the combinations of 9 exchange and 12 correlation functionals. Single-point coupled cluster [CCSD(T)] calculations have also been carried out to calibrate the correlation effect. The HF calculations yield unbound potentials largely because of the exchange-repulsion interaction. In the MP2 calculations, the basis set effects on the repulsion exponent, the equilibrium bond length, the binding energy, and the asymptotic behavior of the calculated intermolecular potentials have been thoroughly studied. We have employed basis sets from the Slater type orbitals fitted with Gaussian functions (STO-nG, n = 3 approximately 6), Pople's medium size basis sets [up to 6-311++G(3df,3pd)], to Dunning's correlation consistent basis sets (cc-pVXZ and aug-cc-pVXZ, X = D, T, Q). With increasing basis size, the repulsion exponent and the equilibrium bond length converge at the 6-31G** basis set and the 6-311++G(3d,3p) basis set, respectively, while a large basis set (aug-cc-pVTZ) is required to converge the binding energy at a chemical accuracy ( approximately 0.05 kcal/mol). Up to the largest basis set used, the asymptotic dispersion coefficient has not converged to the expected C6 value from molecular polarizability calculations. We attribute the slow convergence partly to the inefficacy of using the MP2 calculations with Gaussian type functions to model the asymptotic behavior. Both the basis set superposition error (BSSE) corrected and uncorrected results are presented to emphasize the importance of including such corrections. Only the BSSE corrected results systematically converge to the expected potential curve with increasing basis size. The DFT calculations generate a wide range of interaction patterns, from purely unbound to strongly bound, underestimating or overestimating the binding energy. The binding energies calculated using the OPTXHCTH147, PBEVP86, PBEP86, PW91TPSS, PW91PBE, and PW91PW91 functionals and the equilibrium bond lengths calculated using the MPWHCTH93, TPSSHCTH, PBEVP86, PBEP86, PW91TPSS, PW91PBE, and PW91PW91 functionals are close to the MP2 results using the 6-311++G(3df,3pd) basis set. A correlation between the calculated DFT potentials and the exchange and correlation enhancement factors at the low-density region has been elucidated. The asymptotic behaviors of the DFT potentials are also analyzed.     

Basis sets for geometry optimizations of second-row transition metal inorganic and organometallic complexes

Modest-sized basis sets for the second-row transition metal atoms are developed for use in geometry optimization calculations. Our method is patterned after previous work on basis sets for first-row transition metal atoms. The basis sets are constructed from the minimal basis sets of Huzinaga and are augmented with a set of diffuse p and d functions. The exponents of these diffuse functions are chosen to minimize both the difference between the calculated and experimental equilibrium geometries and the total molecular energies for several second-row transition metal inorganic and organon etallic complexes. Slightly smaller basis sets, based on the same Huzinaga minimal sets but augmented with a set of diffuse s and p functions rather than diffuse p and d functions, are also presented. The performance of these basis sets is tested on a wide variety of second-row transition metal inorganic and organometallic complexes and is compared to pseudopotential basis sets incorporating effective core potentials.     

Theoretical study of light-metal tetrahydroaluminates

Ab initio calculations of the structural, energetic, vibrational, and magnetic characteristics of the lowest-lying structures for isolated molecules and ions of light-metal tetrahydroaluminates (Li, Na, Be, Mg, and Al) have been performed by the perturbation theory (MP2), quadratic configuration interaction (QCISD(T)), coupled cluster (CCSD(T)), and density functional theory (B3LYP) methods using the 6-31G*, 6-31G**, 6-311+G**, and 6-311++G** basis sets. The trends in the behavior of the molecular characteristics have been analyzed in various related series of these compounds. The results are compared with the data on analogous light-metal tetrahydroborates calculated at the same levels of theory. The differences in structure and stability between analogous hydroborate and alanate complexes are examined. The economical approximation B3LYP/6-311++G**//B3LYP/6-311+G** has been shown to adequately reproduce the results obtained at the higher level of theory CCSD(T)/6-311++G**//MP2/6-31G* even though it requires considerably shorter CPU times and smaller amounts of memory.     

X-ray and quantum-topological studies of intermolecular interactions in partially fluorinated quinoline crystals

An X-ray study of the crystals of bicyclic compounds containing fluorinated aromatic and nonfluorinated heteroaromatic rings, 5,6,7,8-tetrafluoroquinoline, 5,6,8-trifluoroquinoline, 5,7-difluoroquinoline, 5,7,8-trifluoro-2-phenylquinoline, and 5,7,8-trifluoro-6-trifluoromethylquinoline, was carried out. The basic supramolecular motifs and the underlying intermolecular interactions that control the lattice structure of these compounds were investigated. B3LYP DFT quantum-chemical calculations (6-311G(d,p) basis set) and the topological analysis of the electron density distribution in terms of Bader’s QTAIM theory were performed for the compounds. It is shown that the intermolecular interactions in question, traditionally regarded as nonvalent interactions, are related, to a definite extent, to the formation of very weak covalent chemical bonds in the intermolecular space due to the overlap of the “tails” of the molecular wave functions.     

Valence electronic structures of CH2BrCl and CF2BrCl: binding energy spectra and electron momentum distributions

The binding energy spectra (BES) of valence shells of CH2BrCl and CF2BrCl have been measured at a series of different azimuthal angles by an (e, 2e) electron momentum spectrometer employing noncoplanar symmetric geometry at an impact energy of 1200 eV plus binding energy. The experimental momentum profiles (XMPs) are extracted from the sequential BES and compared with the theoretical ones calculated by using Hartree-Fock (HF) and density functional theory (DFT-B3LYP) calculations with 6-311G, 6-311++G**, and aug-cc-pVTZ basis sets. In general, the DFT-B3LYP calculations using the larger basis sets 6-311++G** and aug-cc-pVTZ describe the XMPs well for both molecules. Moreover, the pole strengths of main ionizations from the inner valence orbitals 2a', 3a', and 1a' of CH2BrCl are determined, and the controversial ordering of two outer valence orbitals 3a' ' and 6a' of CF2BrCl has also been assigned unambiguously.     

Cooperative enhancement of water binding to crownophane by multiple hydrogen bonds: analysis by high level ab initio calculations.

The intermolecular interaction energy of the model system of the water-crownophane complex was analyzed. The water molecule has four hydrogen bonds, with the two hydrogen-donating phenolic hydroxy groups and two hydrogen-accepting oxygen atoms of the poly-oxyethylene chain of the crownophane in the complex. The MP2/6-311G(2d,2p) level calculations of the model system of the complex (hydrogen donating unit + hydrogen accepting unit + water) indicate that the binding energy of the water is 21.85 kcal/mol and that the hydrogen bond cooperativity increases the binding energy as much as 3.67 kcal/mol. The calculated interaction energies depend on the basis set, while the basis set dependence of the cooperative increment is negligible. Most of the cooperative increment is covered by the HF level calculation, which suggests that the major source of the hydrogen bond cooperativity in this system has its origin in induction. The BLYP/6-311G** and PW91/6-311G** level interaction energies of the model system are close to the MP2/6-311G** interaction energies, which suggests that the DFT calculations with these functionals are useful methods to evaluated the interactions of hydrogen bonded systems.     

Theoretical study of light-metal tetrahydroborates

Ab initio calculations of the structural, energetic, vibrational, and magnetic characteristics of the lowest-lying structures for isolated molecules and ions of light-metal tetrahydroborates (Li, Na, Be, Mg, and Al) have been performed by the perturbation theory (MP2), quadratic configuration interaction (QCISD(T)), coupled cluster (CCSD(T)), and density functional theory (B3LYP) methods using the 6-31G*, 6-31G**, 6-311+G**, and 6-311++G** basis sets. The trends in the behavior of the structural parameters, the energies of different decomposition pathways, barriers to internal rotation of BH₄ groups, normal mode frequencies, magnetic shielding constants, and spin density distribution (in radicals) have been analyzed in various related series of these compounds. The results obtained by ab initio methods and at the DFT level are compared. The economical approximation B3LYP/6-311++G**//B3LYP/6-311+G** adequately reproduces the results obtained at the higher level of theory CCSD(T)/6-311++G*s*//MP2/6-31G* even though it requires considerably shorter CPU times and smaller amounts of memory.