Adsorption reactions of dimethylaluminum isopropoxide and water on the H/Si(100)-2 x 1 surface: initial reactions for atomic layer deposition of Al2O3

The surface reaction pathways of dimethylaluminum isopropoxide (DMAI) and water with the H/Si(100)-2 x 1 surface were theoretically investigated with SIMOMM:MP2/6-31G(d). The oxygen atom in DMAI stabilizes an initial complex, facilitating the approach of DMAI to the surface. The methane loss reaction, propane loss reaction, methylation, hydrogen loss reaction, and ring closing reaction channels of the DMAI-surface reactions were identified. Among these, the methane loss reaction depositing -Al(CH3)OCH(CH3)2 was found to be the major channel due to low barrier height and large exothermicity. The ring closing reaction is kinetically the second most accessible channel, even though it is not thermodynamically favorable. On the basis of these theoretical results, recent experimental data were reinterpreted such that the experimentally observed peaks of CH4 and CH(CH3)2OH are in fact the products of these two channels. The propane loss reaction is kinetically the third most probable channel. It produces the surface Si-O bond, which is a reaction unique to DMAI as compared to trimethylaluminum. In summary, the oxygen substitution not only affects the basic nature of the existing potential energy surfaces but also opens new possibilities.     

Matrix isolation infrared spectroscopic and theoretical study of the reactions of tantalum oxide molecules with methanol

The reactions of tantalum monoxide (TaO) and dioxide (TaO(2)) molecules with methanol in solid neon were investigated by infrared absorption spectroscopy. The ground-state TaO molecule reacted with CH(3)OH in forming the CH(3)OTa(O)H molecule via the hydroxylic hydrogen atom transfer from methanol to the metal center spontaneously on annealing. The observation of the spontaneous reaction is consistent with theoretical predictions that the OH bond activation process is both thermodynamically exothermic and kinetically facile. In contrast, the TaO(2) molecule reacted with CH(3)OH to give primarily the TaO(2)(CH(3)OH) complex, which further rearranged to the CH(3)OTa(O)OH isomer via the hydroxylic hydrogen atom transfer from methanol to one of oxygen atom of metal dioxide upon visible light excitation.     

Atomic layer deposition of TiO2 from TiI4 and H2O onto SiO2 surfaces: ab initio calculations of the initial reaction mechanisms

The initial surface reactions involved in the atomic layer deposition (ALD) of TiO2 from TiI4 and H2O onto a SiO2 substrate have been investigated using electronic structure calculations based on cluster models. The detailed atomic growth mechanisms on different types of functionalities on the SiO2 substrate have been proposed. The effects of quantum tunneling and hindered rotations of adsorbates on the rate of surface reactions have been investigated. The effects of tunneling were found to be negligible for all reactions, because typical ALD temperatures range from 150 to 450 degrees C. However, the rotational contributions to the rate constants must be taken into account in certain cases. All of the three surface functionalities investigated exhibit high chemical reactivity toward TiI4 precursors at typical ALD temperatures. The rate constants of the second half-reactions between Ti intermediates and H2O are 5-8 orders of magnitude smaller than the first half-reactions between TiI4 and the surface functionalities. Although the iodine release reaction has been used to explain previous experimental measurements, it is predicted to be unfavorable (kinetically and thermodynamically) and is unlikely to occur at typical ALD temperatures. Substitution of TiI4 with TiCl4 as the metal precursor can increase the binding energies of the absorbates onto the surface due to the high electronegativity of the Cl ligands. However, the activation barriers are not significantly different between these two metal precursors. More importantly, our calculations predict that TiI4 precursors tend to produce TiO2 films with fewer impurities than the TiCl4 precursors.     

Catalytic thermal and photo-induced CH and CC activation reactions of alkanes with ansa amido functionalized half-sandwich complexes and methylalumoxane

In the literature most of the dehydrogenation reactions of alkanes are described as CH activation reactions of cyclooctane. The best results of CH activation reactions have been found for the reaction of MAO activated metallocene complexes and cyclooctane at temperatures over 300 °C.The application of ansa amido functionalized half sandwich compounds of the type Ind′Si(Me)2NtBuMCl2 (Ind′= monosubstituted indenyl); M = Ti, Zr, Hf) for CH and CC activation reactions is completely unknown in the literature.In contrast to the dehydrogenation reactions of cyclooctane and the metallocene complexes of the group 4 metals, where the zirconocene complexes give higher TONs than the titanocene complexes the ansa amido functionalized titanium complexes give more than two times higher TONs than the corresponding Zr or Hf complexes. The ansa amido functionalized ligand increases the TONs for the Ti complexes and decreases the TONs of the Zr complexes.In contrast to the metallocene complexes, the ansa amido functionalized dichloride complexes of Ti show also a higher activity than the corresponding Zr complexes. It is known that the photolysis of organometallic titanium, zirconium and hafnium (IV) compounds can give M(III) radicals. The formation of the active Ti metal centre is easier than in the case of the corresponding Zr and Hf metal compounds.     

Chemo- and periselectivity in the addition of [OsO2(CH2)2] to ethylene: a theoretical study

Quantum chemical calculations by using density functional theory at the B3LYP level have been carried out to elucidate the reaction course for the addition of ethylene to [OsO2(CH2)2] (1). The calculations predict that the kinetically most favorable reaction proceeds with an activation barrier of 8.1 kcal mol(-1) via [3+2] addition across the O=Os=CH2 moiety. This reaction is -42.4 kcal mol(-1) exothermic. Alternatively, the [3+2] addition to the H2C=Os=CH2 fragment of 1 leads to the most stable addition product 4 (-72.7 kcal mol(-1)), yet this process has a higher activation barrier (13.0 kcal mol(-1)). The [3+2] addition to the O=Os=O fragment yielding 2 is kinetically (27.5 kcal mol(-1)) and thermodynamically (-7.0 kcal mol(-1)) the least favorable [3+2] reaction. The formal [2+2] addition to the Os=O and Os=CH2 double bonds proceeds by initial rearrangement of 1 to the metallaoxirane 1 a. The rearrangement 1-->1 a and the following [2+2] additions have significantly higher activation barriers (>30 kcal mol(-1)) than the [3+2] reactions. Another isomer of 1 is the dioxoosmacyclopropane 1 b, which is 56.2 kcal mol(-1) lower in energy than 1. The activation barrier for the 1-->1 b isomerization is 15.7 kcal mol(-1). The calculations predict that there are no energetically favorable addition reactions of ethylene with 1 b. The isomeric form 1 c containing a peroxo group is too high in energy to be relevant for the reaction course. The accuracy of the B3LYP results is corroborated by high level post-HF CCSD(T) calculations for a subset of species.     

次甲基硅SiH与H2X(X=O,S)反应的热力学及动力学性质研究

在量子化学对SiH与H₂O和H₂S反应计算的基础上,运用统计热力学和Wigner校正的Eyring过渡态理论,计算了上述两反应在200～2000 K温度范围内的热力学函数、平衡常数、频率因子A和速率常数随温度的变化。计算结果表明,两反应在低温下具有热力学优势,而在高温下具有动力学优势。比较两反应的计算结果发现,在相同的温度下,SiH与H₂O反应比SiH与H₂S反应放热较多,但速率常数却较小。SiH与H₂O反应和前文报道的SiH与HF反应的比较表明,SiH与H₂O反应放热较少,而且在相同温度下,速率常数也较小。     

Guided-ion beam and theoretical study of the potential energy surface for activation of methane by W+

A guided-ion beam tandem mass spectrometer is used to study the reactions, W(+) + CH(4) (CD(4)) and [W,C,2H](+) + H(2) (D(2)), to probe the [W,C,4H](+) potential energy surface. The reaction W(+) + CH(4) produces [W,C,2H](+) in the only low-energy process. The analogous reaction in the CD(4) system exhibits a cross section with strong differences at the lowest energies caused by zero-point energy differences, demonstrating that this reaction is slightly exothermic for CH(4) and slightly endothermic for CD(4). The [W,C,2H](+) product ion reacts further at thermal energies with CH(4) to produce W(CH(2))(x)(+) (x = 2-4). At higher energies, the W(+) + CH(4) reaction forms WH(+) as the dominant ionic product with smaller amounts of WCH(3)(+), WCH(+), and WC(+) also formed. The energy dependent cross sections for endothermic formation of the various products are analyzed and allow the determination of D(0)(W(+)-CH(3)) approximately 2.31 +/- 0.10 eV, D(0)(W(+)-CH(2)) = 4.74 +/- 0.03 eV, D(0)(W(+)-CH) = 6.01 +/- 0.28 eV, and D(0)(W(+)-C) = 4.96 +/- 0.22 eV. We also examine the reverse reaction, [W,C,2H](+) + H(2) (D(2)) --> W(+) + CH(4) (CH(2)D(2)). Combining the cross sections for the forward and reverse processes yields an equilibrium constant from which D(0)(W(+)-CH(2)) = 4.72 +/- 0.04 eV is derived. Theoretical calculations performed at the B3LYP/HW+/6-311++G(3df,3p) level yield thermochemistry in reasonable agreement with experiment. These calculations help identify the structures and electronic states of the species involved and characterize the potential energy surface for the [W,C,4H](+) system.     

Gas-phase reactions of organic radicals and diradicals with ions

Reactions of polyatomic organic radicals with gas phase ions have been studied at thermal energy using a flowing afterglow-selected ion flow tube (FA-SIFT) instrument. A supersonic pyrolysis nozzle produces allyl radical (CH2CHCH2) and ortho-benzyne diradical (o-C6H4) for reaction with ions. We have observed: [CH2CHCH2 + H3O+ --> C3H6+ + H2O], [CH2CHCH2 + HO- --> no ion products], [o-C6H4 + H3O+ --> C6H5+ + H2O], and [o-C6H4 + HO- --> C6H3- + H2O]. The proton transfer reactions with H3O+ occur at nearly every collision (kII approximately with 10(-9) cm3 s(-1)). The exothermic proton abstraction for o-C6H4 + HO- is unexpectedly slow (kII approximately with 10(-10) cm3 s(-1)). This has been rationalized by competing associative detachment: o-C6H4 + HO- --> C6H5O + e-. The allyl + HO- reaction proceeds presumably via similar detachment pathways.     

A computational study of H2 dissociation on silver surfaces: the effect of oxygen in the added row structure of Ag110

We studied computationally the activation of H(2) on clean planar (111), (110) and stepped (221) as well as oxygen pre-covered silver surfaces using a density functional slab model approach. In line with previous data we determined clean silver to be inert towards H(2) dissociation, both thermodynamically and kinetically. The reaction is endothermic by approximately 40 kJ mol(-1) and exhibits high activation energies of approximately 125 kJ mol(-1). However, oxygen on the surface, modeled by the reconstructed surface p(2 x 1)O/Ag(110) that exhibits -O-Ag-O- added rows, renders H(2) dissociation clearly exothermic and kinetically feasible. The reaction was calculated to proceed in two steps: first the H-H bond is broken at an Ag-O pair with an activation barrier E(a) approximately 70 kJ mol(-1), then the H atom bound at an Ag center migrates to a neighboring O center with E(a) approximately 12 kJ mol(-1).     

Guided ion beam and theoretical study of the reactions of Hf+ with H2, D2, and HD

The kinetic energy dependences of reactions of the third-row transition metal cation Hf(+) with H(2), D(2), and HD were determined using a guided ion beam tandem mass spectrometer. A flow tube ion source produces Hf(+) in its (2)D (6s(2)5d(1)) electronic ground state level. Corresponding state-specific reaction cross sections are obtained. The kinetic energy dependences of the cross sections for the endothermic formation of HfH(+) and HfD(+) are analyzed to give a 0 K bond dissociation energy of D(0)(Hf(+)-H)=2.11±0.08 eV. Quantum chemical calculations at several levels of theory performed here generally overestimate the experimental bond energy but results obtained using the Becke-half-and-half-LYP functional show good agreement. Theory also provides the electronic structures of these species and the reactive potential energy surfaces. Results from the reactions with HD provide insight into the reaction mechanisms and indicates that Hf(+) reacts via a statistical mechanism. We also compare this third-row transition metal system with the first-row and second-row congeners, Ti(+) and Zr(+), and find that Hf(+) has a weaker M(+)-H bond. As most third-row transition metal hydride cation bonds exceed their lighter congeners, this trend is unusual but can be understood using promotion energy arguments.     

Experimental and theoretical study of the reactions between neutral vanadium oxide clusters and ethane, ethylene, and acetylene

Reactions of neutral vanadium oxide clusters with small hydrocarbons, namely C2H6, C2H4, and C2H2, are investigated by experiment and density functional theory (DFT) calculations. Single photon ionization through extreme ultraviolet (EUV, 46.9 nm, 26.5 eV) and vacuum ultraviolet (VUV, 118 nm, 10.5 eV) lasers is used to detect neutral cluster distributions and reaction products. The most stable vanadium oxide clusters VO2, V2O5, V3O7, V4O10, etc. tend to associate with C2H4 generating products V(m)O(n)C2H4. Oxygen-rich clusters VO3(V2O5)(n=0,1,2...), (e.g., VO3, V3O8, and V5O13) react with C2H4 molecules to cause a cleavage of the C=C bond of C2H4 to produce (V2O5)(n)VO2CH2 clusters. For the reactions of vanadium oxide clusters (V(m)O(n)) with C2H2 molecules, V(m)O(n)C2H2 are assigned as the major products of the association reactions. Additionally, a dehydration reaction for VO3 + C2H2 to produce VO2C2 is also identified. C2H6 molecules are quite stable toward reaction with neutral vanadium oxide clusters. Density functional theory calculations are employed to investigate association reactions for V2O5 + C2H(x). The observed relative reactivity of C2 hydrocarbons toward neutral vanadium oxide clusters is well interpreted by using the DFT calculated binding energies. DFT calculations of the pathways for VO3+C2H4 and VO3+C2H2 reaction systems indicate that the reactions VO3+C2H4 --> VO2CH2 + H2CO and VO3+C2H2 --> VO2C2 + H2O are thermodynamically favorable and overall barrierless at room temperature, in good agreement with the experimental observations.     

Initial oxidation and hydroxylation of the Ge(100)-2 x 1 surface by water and hydrogen peroxide

We use density functional theory to investigate the surface chemistry of initial oxidation and hydroxylation of the Ge(100)-2 x 1 surface by water and hydrogen peroxide. Comparison of the reaction of water on the Si(100)-2 x 1 and Ge(100)-2 x 1 surfaces shows that the kinetics of oxidation of the Ge(100)-2 x 1 surface with water is slower. Our calculations also show that oxidation products on the Ge(100)-2 x 1 surface are less thermodynamically stable than on Si. We also investigate two competing dissociation reactions of H2O2 on the Ge(100)-2 x 1 surface. We find that dissociative adsorption via cleavage of the OH bond is less exothermic than OO dissociation. Furthermore, interdimer OO dissociation has a lower activation barrier than interdimer or intradimer OH dissociation, although interdimer dissociation products are found to be less stable compared than those formed from intradimer dissociation reactions. Finally, we find that the oxidation products formed from hydrogen peroxide are more stable than those formed from water.     

Mechanism and regioselectivity for the reactions of propylene oxide with X(100)-2x1 surfaces (X = C, Si, Ge): a density functional cluster model investigation

We have performed density functional cluster model calculations to explore the mechanism and regioselectivity for the reactions of propylene oxide with X(100)-2x1 surfaces (X = C, Si, and Ge). The computations reveal the following: (i) the reactions on Si(100) and Ge(100) are barrierless and highly exothermic; (ii) the reactions on X(100) (X = Si and Ge) are initiated by the formation of a dative-bonded precursor state followed by regioselective cleavage of the C2-O bond (C2 directly connected to the methyl-substituent) in propylene oxide, giving rise to a five-membered ring surface species; and (iii) the reaction on C(100), although highly exothermic, requires a large activation energy and would be kinetically forbidden at room temperature.     

Mono- and dinuclear complexes of sulfones with the tetrachlorides of group 4

The reactions of dialkyl sulfones [R(2)SO(2): R = Me, Et, Ph, R(2)=-(CH(2))(4)-] with the metal tetrachlorides of Group 4 [MCl(4): M = Ti, Zr, Hf] give different products mainly depending on the sulfone/M molar ratio. Compounds of formula [M(2)Cl(8)(R(2)SO(2))(2)][M = Ti, R(2)=-(CH(2))(4)-; M = Zr, R = Et, R = Ph] and [MCl(4)(R(2)SO(2))(2)](sulfone/M = 2)[M = Ti, R = Me; M = Zr, R = Me, R = Ph, R(2)=-(CH(2))(4)-; M = Hf, R = Me, R(2)=-(CH(2))(4)-] have been obtained. By X-ray diffraction methods the dinuclear titanium and zirconium adducts, [Ti(2)Cl(8)(mu-sulfolane-O,O')(2)] and [Zr(2)Cl(8)(mu-Ph(2)SO(2)-O,O')(2)] have been established to contain bridging sulfone and hexacoordinated metal centres, while the mononuclear zirconium complex [ZrCl(4)(Me(2)SO(2))(2)] has cis-monodentate sulfones in a slightly distorted octahedral geometry. The reaction between TiCl(4) and sulfolane (tetrahydrothiophene 1,1-dioxide) in SOCl(2) affords the 1:1 adduct independent of the sulfone/Ti molar ratio. Ligand-exchange and inter-conversion between mononuclear and dinuclear species have been observed by NMR, while the spectral features of the SO(2) moiety have been assigned by IR- and Raman spectroscopies.     

Design and self-assembly of ditopic and tetratopic cavitand complexes

The self-assembly of open ditopic and tetratopic cavitand complexes has been investigated by using monofunctionalized cavitand ligands and suitable metal precursors. In the case of ditopic complexes, self-assembly protocols, leading exclusively to the formation of both thermodynamically stable cis-Pt square-planar complexes 8 and 9 and the kinetically inert fac-Re octahedral complex 14, have been elaborated. The use of cis-[Pt(CH3)CN)2Cl2] as metal precursor led to the formation of monotopic trans-10 and ditopic trans-11 cavitand complexes, while cis-[Pt(dmso)2Cl2] afforded both cis-13 and trans-11 isomers. The self-assembly of tetratopic cavitand complexes has been achieved by using mononuclear [Pd(CH3CN)4(BF4)2] and dinuclear [M2(tppb)(OTf)4] (19: M = Pt; 20: M = Pd) metal precursors. Only the tetratopic dinuclear complexes 21 and 22 were stable. The ligand configuration with two phosphorus and two cavitand ligands at the metal centers is the most appropriate to build tetratopic cavitand complexes with sufficient kinetic stability.     

Experimental and computational studies of trialkylaluminum and alkylaluminum chloride reactions with silica

Reactions of trimethylaluminum, triethylaluminum, and diethylaluminum chloride and ethylaluminum dichloride with silica gel have been studied experimentally by infrared spectroscopy and elemental analysis. The silica gel was subjected to different pretreatments to alter surface functionalities prior to reaction. In all cases the extent of surface modification reaction follows the trend unmodified > 600 degrees C pretreated > hexamethyldisilazane (HMDZ) pretreated > 600 degrees C/HMDZ pretreated. All of the aluminum compounds studied completely react non-hydrogen-bonded silanols, while also reacting with hydrogen-bonded silanols and siloxanes. Primarily monomeric surface species result from the surface modification reaction. Ethylaluminum chlorides preferentially react with silanols through cleavage of the Al-C bond rather than the Al-Cl bond. Singly bonded Si(s)-O-AlCl(2) surface species are readily synthesized by reaction of ethylaluminum dichloride with HMDZ-pretreated silica gel. Bridged bonded (Si(s)-O)(2)-AlCl surface species are readily synthesized by reaction of diethylaluminum chloride with HMDZ-pretreated silica gel. Computational ab initio studies of the cluster Si(4)O(6)(OH)(4) as a model to study the reaction of monomeric and dimeric methylaluminum dichloride with a silica silanol are also described. Comparison of the potential energy surface (PES) of monomer and dimer indicates that the energetics favor monomer reaction, consistent with experimental results. The energy cost in the dimer reaction is primarily from cleavage of a bridged Al-Cl bond upon adsorption. This does not occur when the monomer adsorbs. A comparison of the PES for the two reaction pathways resulting from cleavage of either an Al-Cl or Al-C bond indicates that while the former reaction is slightly kinetically favored (E(a) = 23.1 kJ/mol for Al-Cl bond cleavage versus E(a) = 31.1 kJ/mol for Al-C bond cleavage), the latter is strongly thermodynamically favored with an overall free energy difference between the two reaction pathways of 135 kJ/mol favorable to Al-C bond cleavage. These reactions are thermodynamically controlled.     

A DFT study of SiH(4) activation by Cp(2)LnH

A theoretical study of SiH(4) activation by Cp(2)LnH complexes for the entire series of lanthanides has been carried out at the DFT-B3PW91 level of theory. The reaction paths corresponding to H/H exchange and silylation, formation of Cp(2)Ln(SiH(3)), have been computed. They both occur via a single-step sigma-bond metathesis mechanism. For the athermal H/H exchange reaction, the calculated activation barrier averages 1.8 kcal.mol(-)(1) relative to the precursor adduct Cp(2)LnH(eta(2)-SiH(4)) for all lanthanide elements. The silylation path is slightly exogenic (DeltaE approximately -6.5 kcal.mol(-1)) with an activation barrier averaging 5.2 kcal.mol(-1) relative to the precursor adduct where SiH(4) is bonded by two Si-H bonds. Both pathways are therefore thermally accessible. The H/H exchange path is calculated to be kinetically more favorable whereas the silylation reaction is thermodynamically preferred. The reactivity of this familly of lanthanide complexes with SiH(4) contrasts strongly with that obtained previously with CH(4). The considerably lower activation barrier for silylation relative to methylation is attributed to the ability of Si to become hypervalent.     

Synthesis and structure of diamido ether uranium(IV) and thorium(IV) halide "ate" complexes and their conversion to salt-free bis(alkyl) complexes

The high-yield synthesis, spectroscopic and structural determination of three new uranium(IV) and thorium(IV)ate complexes supported by three different diamido ether ligands are reported. The reaction of Li2[2,6-iPr2PhN(CH2CH2)]2O (Li2[DIPPNCOCN]) with 1 equiv. of UCl4 in THF generates [DIPPNCOCN]UCl3Li(THF)2(1), while reaction in toluene/ether gives salt-free [DIPPNCOCN]UCl2.1/2C7H8(2), which was identified by paramagnetically shifted 1H NMR. Reaction of 0.5 equiv. of {[tBuNON]UCl2}2([tBuNON]=[(CH3)3CN(Si(CH3)2)]2O2-) with 3.5 equiv. LiI in toluene and a minimal amount of THF results in [tBuNON]UI3Li(THF)2(3) and is very similar in structure to 1. {[MesNON]ThCl3Li(THF)}2(4), a dimeric complex with a Th2Li2Cl6 core, is prepared by reaction of Li2[2,4,6-Me3PhN(Si(CH3)2)]2O (Li2[MesNON]) with ThCl4 in THF. The analogous reaction in toluene did not yield the salt-free complex but rather a sterically crowded diligated compound, [MesNON]2Th (5), which was also structurally characterized. Complex 5 was prepared rationally by reacting 2 equiv. Li2[MesNON] with ThCl4 in toluene. The reaction of 1 and 3 with 2 equiv. of LiCH2Si(CH3)3 generates the stable, salt-free organoactinides [DIPPNCOCN]U(CH2Si(CH3)3)2(6) and [tBuNON]U(CH2Si(CH3)3)2(7). Complex 6 was structurally characterized. These reactions illustrate the viability of ate complexes as useful synthetic precursors.     

Base-induced decomposition of alkyl hydroperoxides in the gas phase. Part 3. Kinetics and dynamics in HO- + CH3OOH, C2H5OOH, and tert-C4H9OOH reactions

The E(CO)2 elimination reactions of alkyl hydroperoxides proceed via abstraction of an alpha-hydrogen by a base: X(-) + R(1)R(2)HCOOH --> HX + R(1)R(2)C=O + HO(-). Efficiencies and product distributions for the reactions of the hydroxide anion with methyl, ethyl, and tert-butyl hydroperoxides are studied in the gas phase. On the basis of experiments using three isotopic analogues, HO(-) + CH3OOH, HO(-) + CD3OOH, and H(18)O(-) + CH3OOH, the overall intrinsic reaction efficiency is determined to be 80% or greater. The E(CO)2 decomposition is facile for these methylperoxide reactions, and predominates over competing proton transfer at the hydroperoxide moiety. The CH3CH2OOH reaction displays a similar E(CO)2 reactivity, whereas proton transfer and the formation of HOO(-) are the exclusive pathways observed for (CH3)3COOH, which has no alpha-hydrogen. All results are consistent with the E(CO)2 mechanism, transition state structure, and reaction energy diagrams calculated using the hybrid density functional B3LYP approach. Isotope labeling for HO(-) + CH3OOH also reveals some interaction between H2O and HO(-) within the E(CO)2 product complex [H2O...CH2=O...HO(-)]. There is little evidence, however, for the formation of the most exothermic products H2O + CH2(OH)O(-), which would arise from nucleophilic condensation of CH2=O and HO(-). The results suggest that the product dynamics are not totally statistical but are rather direct after the E(CO)2 transition state. The larger HO(-) + CH3CH2OOH system displays more statistical behavior during complex dissociation.     

Theoretical Study of Reaction Mechanism of 1-Propenyl Radical with NO

The reaction system of 1-propenyl radical with NO is an ideal model for studying the intermolecular and intramolecular reactions of complex organic free radicals containing C=C double bonds. On the basis of the full optimization of all species with the Gaussian 98 package at the B3LYP/6-311++G** level, the reaction mechanism was elucidated extensively using the vibrational mode analysis. There are seven reaction pathways and five sets of small molecule end products: CH2O+CH3CN, CH2CHCN+H2O, CH3CHO+HCN, CH3CHO+HNC, and CH3CCH+HNO. The channel of C3H5￠+NO→ IM1→TS1→IM2→TS2→IM3→TS3→CH3CHO+HCN is thermodynamically most favorable.