Thermomechanical analysis of a polymer dispersed liquid crystal containing a thermoplastic elastomer

Bulk samples of polymer dispersed liquid crystals (PDLCs) containing polystyrene (PS) and a thermoelastic elastomer as polymer matrices, have been prepared by a thermally-induced phase separation method. Thermomechanical analysis measurements revealed that the PDLC containing the thermoplastic elastomer possessed rubber-like elasticity even in the mesomorphic temperature range of the LC while the PDLC based on PS showed plastic deformation during the measurement.     

Modification of electro-optical properties of polymer dispersed liquid crystal films by iniferter polymerization

In this letter, iniferter polymerization was employed to prepare polymer dispersed liquid crystal (PDLC) films. Polystyrene (PS) was prepared as a macro-iniferter (MI). With the addition of MI in PDLC films, poly(methyl acrylate)-b-polystyrene was prepared in situ and used as polymer matrix in photopolymerization induced phase separation (PIPS). A reduction in driving voltages and an improvement in the ON state transmittance were observed for the sample prepared with a small amount of MI; while a poor electro-optical performance was obtained for that without any MI. Moreover, molecular weight and refractive index of the polymer matrix could be easily adjusted by the concentration of MI, and the matrix seems to be a prospective material for the PDLC devices.     

Thermotropic and optical behaviour of new PDLC systems based on a polysulfone matrix and a cyanoazomethine liquid crystal

The thermotropic and optical characterisations of a novel polymer dispersed liquid crystal (PDLC) system based on polysulfone UDEL P-1700 as polymer matrix and a low molecular weight liquid crystal compound containing a mesogenic azomethine core and a cyano-substituent were investigated. The PDLC samples were prepared by solvent-induced phase separation (SIPS) and thermally induced phase separation (TIPS) methods using various compositions in the two components. Information on the morphology and phase structure was obtained by polarising optical microscopy, differential scanning calorimetry and X-ray diffraction measurements. PDLC systems with well-defined droplets were obtained for the composite with medium content of liquid crystal compound. The optical characterisation of these materials was performed by analysing their UV–visible absorption and photoluminescence emission as a function of the liquid crystal aggregation degree.     

Dielectric relaxation spectroscopy and alignment behavior of a polymer‐dispersed liquid crystal and its component materials

The dielectric properties of a polymer‐dispersed liquid crystal (PDLC), a liquid‐crystal (LC) mixture (BL036), and three polymer matrices of PN314 containing different amounts of BLO36 were determined over a range of frequencies and temperatures and, for the LC and PDLC, over a range of voltages leading to homeotropic alignment of the LC. The overall dielectric relaxation process was a weighted sum of contributions from (1) the primary (δ) process in the LC arising from the motions of the dipoles about the short molecular axis and (2) dipole motions in the polymer matrix. The dielectric spectra were determined as a function of frequency, temperature, and, when appropriate, applied voltage. An equivalent electrical circuit was used as a working model to describe the dielectric behavior of the PDLC in the absence and presence of applied voltages. Agreement between the dielectric data and this model was achieved if a portion of the LC phase at the interface was assumed to be immobile. The director order parameter for the LC component in the PDLC was determined from dielectric measurements as the material was aligned homeotropically in an applied electric field. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 1173–1194, 2001     

The effect of fluorine-substituted acrylate monomers on the electro-optical and morphological properties of polymer dispersed liquid crystals

The effects of fluorinated acrylate monomers on the electro-optical and morphological properties of polymer dispersed liquid crystal (PDLC) films are reported. The partial fluorination of host polymer matrices resulted in improved optical properties and better defined morphologies. An enhancement in contrast ratio was observed for fluorinated systems containing trifluoroethyl acrylate (TFEA) and hexafluoroisopropyl acrylate (HFIPA). Conversely, the incorporation of methyl acrylate (MA), a chemically similar non-fluorinated acrylate, resulted in no appreciable change in contrast ratio and an increase in relaxation time. Scanning electron microscopy morphological studies were conducted to understand further the influence of fluorinated monomers in PDLC systems.     

Elaboration and electro-optic study of a new type of open porosity PDLC

A new polymer dispersed liquid crystal (PDLC) system characterized by easy processing and an open porosity has been elaborated. This PDLC is based on a pre-formed, porous, thin polymer film of a commercially available PVDF-HFP copolymer wetted by the eutectic mixture of cyano bi- and ter-phenyls known as E7 (Merck Ltd, UK). This new process is of interest because of its simplicity, and the fact that there is no risk of intermixing between the liquid crystal and the polymer matrix as occurs in a conventional PDLC. An electric field applied across the thin film results in a change in its transmission, due to the reorientation of the liquid crystal director, as already known for closed porosity PDLCs. The electro-optic properties of this PDLC have been studied and semi-quantitatively interpreted on the basis of the response theory of conventional closed porosity PDLCs.     

Fabrication of fluorescent surface relief patterns using AIE polymer through a soft lithographic approach

A new aggregation‐induced emission (AIE) active polymer (PS‐TPE) with high tetraphenylethene (TPE) loading density was synthesized. The synthesized polymer showed significant AIE properties, good solubility and high thermal stability. Soft‐lithographic contact printing process by using photoinduced surface relief structures on azo polymer film as masters and duplicated PDMS elastomer as stamps was used to fabricate fluorescent PS‐TPE patterns. Various fluorescent structures with high contrast including surface relief gratings, periodically dotted patterns, and quasi‐crystal structures can be easily fabricated through this approach. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1838–1845     

Influence of SMA content on the electro-optical properties of polymer-dispersed liquid crystal prepared by monodisperse poly(MMA-co-SMA)/LC microcapsules

Monodisperse poly(methyl methacrylate) (PMMA) particles containing various concentrations of stearyl methacrylate (SMA) were prepared, and a liquid crystal (LC) was swollen into the particles using a solute co-diffusion method (SCM). Phase separation behaviors between the polymer and LC were monitored by utilizing an optical and a polarized microscope (OM/POM). The monodisperse LC microcapsules were then applied to a polymer-dispersed liquid crystal (PDLC), and the electro-optical properties were investigated. As a result, the threshold and driving voltages were improved when the SMA content increased. The long alkyl chains of SMA in the capsules should exist at the interface of the LC and polymer resulting in an enhancement of phase separation between the polymer and LC, which largely influences the electro-optical properties of PDLC.     

The effect of fluorine-substituted acrylate monomers on the electro-optical and morphological properties of polymer dispersed liquid crystals

The effects of fluorinated acrylate monomers on the electro-optical and morphological properties of polymer dispersed liquid crystal (PDLC) films are reported. The partial fluorination of host polymer matrices resulted in improved optical properties and better defined morphologies. An enhancement in contrast ratio was observed for fluorinated systems containing trifluoroethyl acrylate (TFEA) and hexafluoroisopropyl acrylate (HFIPA). Conversely, the incorporation of methyl acrylate (MA), a chemically similar non-fluorinated acrylate, resulted in no appreciable change in contrast ratio and an increase in relaxation time. Scanning electron microscopy morphological studies were conducted to understand further the influence of fluorinated monomers in PDLC systems.     

The effect of molecular weight of polymer matrix on properties of polymer-dispersed liquid crystals

The electro-optical properties and memory effects are important characters of polymer-dispersed liquid crystal (PDLC) devices. Molecular weight of polymer matrix influences the morphology of liquid crystal droplets in PDLC film and the performance of PDLC devices. In this letter, PDLC films were doped with a small amount of chain transfer agent (CTA), in order to control the molecular weight of polymer matrix. It is observed that the addition of CTA induces a reduction of threshold voltage. In addition, the effect of molecular weight on memory effects of PDLC devices was also discussed. It is found that the entanglement between polymer and liquid crystal molecule increased with the molecular weight, which reduces the memory effect.     

A study on the polymer structures and electro-optical properties of epoxy-mercaptan-based polymer dispersed liquid crystal films

ABSTRACT

In this paper, polymer dispersed liquid crystal (PDLC) films based on epoxy-mercaptan system were prepared by thermal-initiated polymerization. The effects of the liquid crystal (LC) content, the proportion and the functionality of epoxy monomers on the polymer structures and electro-optical properties of the as-made PDLC films were investigated systematically. It was found that the morphologies of the polymer matrix can be altered from polymer meshes to polymer balls by increasing the LC content as well as the functionality of epoxy monomers. Accordingly, the electro-optical properties could be regulated by the morphologies of polymer networks. Especially, the as-made PDLC films with homogeneous porous structures exhibited the optimal electro-optical properties. Consequently, this work offers a meaningful approach to control the microstructures and optimize the electro-optical properties of PDLC films, which indeed can form a wonderful footstone for the wide application of PDLC.     

Effects of monomer structure on the morphology of polymer networks and the electro-optical properties of polymer-dispersed liquid crystal films

Polymer-dispersed liquid crystal (PDLC) films were prepared by photochemical polymerisation with a series of (meth)acrylate monomers. The effects of monomer structure on the morphology of polymer networks in the PDLC films were studied. The acrylate monomers without sidegroup chain formed uniform polymer networks. The methacrylate monomers with methyl as their sidegroup chains formed lace-like networks. The size of the LC droplets increased with increasing the length of the flexible chain of both methacrylate and acrylate monomers. Meanwhile, the effects of the morphology of the polymer network on the electro-optical properties of PDLC films were also investigated.     

The effect of the resultant microphase-separated structures of polymer matrices on the electro-optical properties of polymer dispersed liquid crystal films by Iniferter polymerization

Iniferter polymerization was employed to prepare polymer dispersed liquid crystal (PDLC) films and an additional photoinitiator was introduced to induce the phase separation of polymer matrices themselves on the process of preparing the PDLC. The effect of the polymerization kinetics and the resultant microphase-separated structures of polymer matrices on the electro-optical properties of PDLC films were studied. It was found that the bigger length scale of phase separation of polymer matrices induced strong light-scattering resulting in low ON-state transmittance. And faster polymerization kinetic induced higher threshold and saturation voltages.     

Novel techniques of PDLC film preparation furnishing manifold properties in a single device

Three novel techniques of polymer dispersed liquid crystal (PDLC) film preparation have been proposed to obtain/induce systematically varying manifold properties in a single device. These three techniques were used to prepare ‘wedge-shaped’, ‘multi-channelled’ and ‘grating type’ PDLC films. Arrangement and configuration of liquid crystal (LC) microstructures inside these PDLC films, which were conveniently divided into different zones, have been investigated using a polarising optical microscope (POM) and scanning electron microscope (SEM). POM images indicate a predominant bipolar structure in all zones of different types of PDLC films but with varying size and density. Further, the electro-optical (EO) properties of PDLC films for different zones have different morphological characteristics as indicated (observed) in POM and SEM images and were dependent on LC droplet shape, size and distribution. Also different zones show different absorbance/transmittance characteristics in the visible range. Thus, our study proposes a single device with manifold properties. Also, the desired properties can be obtained by selecting the suitable zone from the PDLC composite film.     

High-fidelity solvent-resistant replica molding of hydrophobic polymer surfaces produced by femtosecond laser nanofabrication

We demonstrate that hydrophobic areas formed by femtosecond laser irradiation on poly(methyl methacrylate) (PMMA) and polystyrene (PS) polymer substrates can be faithfully replicated on samples of the same material via a solvent-resistant perfluoropolyether (PFPE) elastomer mold. The replicated PMMA and PS samples show nearly identical micro-nanoscale topography and hydrophobic wetting characteristics as the laser-patterned master substrates. This work combines the femtosecond laser capability of spatially tailoring the wettability with a high-resolution parallel replication method, offering the potential for the efficient production of microfluidic devices with selectively tailored flow behavior.     

Preparation and electro‐optical properties of polymer dispersed liquid crystal films with relatively low liquid crystal content

In this paper, polymer dispersed liquid crystals (PDLC) films with LC content as low as 40 wt% were prepared, and the electro‐optical properties were carefully investigated. To accomplish this, different (meth)acrylate copolymerizaiton monomers have been used. The electro‐optical properties and morphologies of the PDLC films were strongly influenced by the chemical structure of copolymerization monomers (hydroxypropyl methacrylate (HPMA), glycidyl methacrylate, hydroxypropyl acrylate) and their feed ratio. Lower driven voltage and higher contrast ratio were achieved when the PDLC films showed a morphology with suitably LC domain size. At high HPMA content, a thin polymer film was formed on the surface of PDLC samples, which is beneficial to decrease the total LC content in PDLC devices. Copyright © 2013 John Wiley & Sons, Ltd.     

<Superscript>2</Superscript>H-NMR investigation after a polymerisation-induced phase separation process*

Polymer-dispersed liquid crystals (PDLC) are composite materials consisting of micron-sized droplets of liquid crystal dispersed in a polymer matrix. The easiest method to obtain a PDLC film is the polymerisation-induced phase separation process (PIPS). The liquid crystal is mixed with a monomer of low molecular weight and polymerisation is induced by heat or UV light. The increasing molecular weight of the polymer causes the phase separation of liquid crystal from the polymer matrix as micron-sized droplets. In this work, we have studied the structural changes induced in the polymer matrix of a PDLC after the PIPS process by deuterium nuclear magnetic resonance. Two different selectively deuterated monomers have been synthesized and investigated: isobutyl methacrylate (IBMA-d₂) and methyl methacrylate (MMA-d₃). The main results were the disappearance of the characteristic two-site hop in poly-IBMA, due to liquid crystal molecules, and the lack of unreacted MMA molecules in the liquid crystal droplets. In this last case, we found that it is possible to confine temporarily the unreacted MMA molecules within liquid crystal droplets.Abbreviations MMA Methyl methacrylate - IBMA Isobutyl methacrylate - PDLC Polymer-dispersed liquid crystal - PIPS Polymerisation-induced phase separation - ²H-NMR Deuterium nuclear magnetic resonance*Dedicated to Professor V. Bertini for his 70^th birthday     

An investigation on a novel PDLC film’s fabrication and its electro-optical properties

A polymer dispersed liquid crystal (PDLC) film that has good electro-optical properties is produced by the method of polymerized-induced phase separation. Based on the application foreground, its capability parameters, such as contrast ratio, work voltage, and visual angle, are characterized for the first time by a white light but not a fixed wavelength light. The results show the PDLC film has a low work-voltage of 20 V, more than 150° visual angle, high stability, and long lifetime. The differences between plastic and glass ITO-coated substrates of PDLC films are also studied in this paper. The plastic substrate has better property and will have a wider perspective especially in the portable, tender and folded display devices. Due to adjustable properties of film by electric field, PDLC has the potential application for display device, sensor, switch, grating, and new generation analytical apparatus.     

Orientational control of liquid crystal molecules via carbon nanotubes and dichroic dye in polymer dispersed liquid crystal

Polymer dispersed liquid crystals (PDLCs) using nematic liquid crystal and photo-curable polymer (NOA 65) were prepared by polymerisation-induced phase separation technique, in equal ratio (1:1) of polymer and liquid crystal (LC). We demonstrate that doping of small amount (0.125%, wt./wt.) of multiwall carbon nanotubes (CNTs) and orange azo dichroic dye in PDLC generously controlled the molecular orientation, dynamics of LC in droplet and size of droplets. The effects of multiwall CNTs and dye on PDLCs were studied in terms of transition temperature, droplet morphology, transmittance characteristic, contrast ratio and response time. The results exhibited that the values of the threshold electric fields were reduced from 8 V/µm (pure PDLC) to 1.18 and 1.72 V/µm, doped with multiwall CNTs and dye, respectively. The CNTs-doped PDLC shows faster switching response as compared with pure PDLC and dye-doped PDLC. However, dye-doped PDLC shows much higher contrast among all PDLC samples. Further, the results also illustrate that the birefringence value of LC in PDLCs was changed with doping of CNTs and dye.     

Thermo-mechanical and electro-optical properties of polymer dispersed liquid crystal films

We have observed a strong dependence of the electro-optical properties of polymer dispersed liquid crystal (PDLC) films on temperature. One plausible explanation for this dependence is the thermal expansion of the films. We investigated the thermal expansion of various PDLC films using a thermal mechanical analyser (TMA). As the temperature increased, the films expanded and their droplet size decreased, and their contrast, response time, and hysteresis changed simultaneously. We observed obvious changes of thermal expansion coefficient of the films. We studied the qualitative relationship between thermo-mechanical properties and electrooptical properties. The thermal expansion of PDLC films could be adjusted by changing the degree of cross-linking of the polymer.