Colorimetric determination of amoxycillin in pure form and in pharmaceutical preparations

A simple and selective method for the determination of amoxycillin in pure form and in pharmaceutical preparations is described. The procedure is based on the reaction of amoxycillin with 4-nitrophenol (I), 2,4-dinitrophenol (II), 3,5-dinitrobenzoic acid (III) or 3,5-dinitrosalicylic acid (IV) in alkaline medium. The method has been used for the determination of 1-24 mug/ml of amoxycillin trihydrate in solution. The method is selective for the determination of amoxycillin in the presence of its degradation products, other antibiotics and different amines that are normally encountered in dosage forms.     

Hydrogen migrations in mass spectrometry. VI—the chemical ionization mass spectra of substituted benzoic acids and benzyl alcohols

The H₂ and CH₄ chemical ionization mass spectra of a series of series of substituted benzoic acids and substituted benzyl alcohols have been determined. For the benzoic acids the major fragmentation reactions of the protonated molecule involve elimination of H₂O or elimination of CO₂, the latter reaction involving migration of the carboxylic hydrogen to the aromatic ring. For the benzyl alcohols the major fragmentation reactions of [MH]⁺ involve loss of H₂O or CH₂O, analogous to the CO₂ elimination reaction for the benzoic acids. It is shown that the CO₂ and CH₂O elimination reactions occur only when a conjugated aromatic ring system is present, and that for the carboxylic acid systems, methyl groups and, to a lesser extent, phenyl groups are capable of migrating. The only discernible effect of substituents on the fragmentation of [MH]⁺ is an enhancement of the H₂O loss reaction in the benzoic acid system when an amino, hydroxyl, or halogen substituent is ortho to the carboxyl function. This ‘ortho’ effect, which differs in scope from that observed in electron impact mass spectra, is attributed to an intramolecular catalysis by the ortho substituent of the 1,3 hydrogen migration in the carbonyl protonated acid followed by H₂O elimination. Apparently, this route is favoured over the direct elimination of H₂O from the carbonyl protonated acid, since the latter has a high activation energy barrier because of unfavourable orbital symmetry restrictions.     

Spectrophotometric determination of amoxycillin and clavulanic acid in pharmaceutical preparation

A spectrophotometric procedure for the simultaneous determination of amoxycillin and clavulanic acid in some pharmaceutical preparations has been developed. As the absorption bands of amoxycillin (274 and 227 nm) and clavulanic acid (270 nm) overlap, both Vierordt's method and derivative spectrophotometry have been investigated and evaluated. The first-derivative spectrophotometric method was found to be more accurate, direct and reproducible.     

Stopped-flow fluorimetric determination of amoxycillin and clavulanic acid by partial least-squares multivariate calibration

Mixtures of amoxycillin and clavulanic acid were determined by using kinetic data in combination with partial least-squares multivariate calibration. The reaction of oxidation of these compounds with cerium(IV) in sulfuric acid medium has been monitored fluorimetrically. To follow the kinetics of the reaction, the stopped-flow mixing technique was used. Partial least-squares calibration of the kinetic data allowed the resolution of the analytes investigated in the concentration ranges between 0 and 4 mugml(-1). The method was applied satisfactorily to several pharmaceutical formulations, including Clavucid, Augmentine, Pangamox, Eupeclanic and Clamoxyl. The results obtained were validated by using an HPLC method. The percentages of recovery range from 91 to 105% for amoxycillin and from 78 to 117% for clavulanic acid, respectively.     

Mechanism for exchange of heterooeganic fragment between oxygen atoms of -O-N-O group in nitronic acid esters

Conclusions The DNMR method was used to study the 1,3-(O,O) migration of the heteroorganic fragment in the diethylboron and trimethylsilyl esters of bis(carbomethoxymethane)nitronic acid, and it was shown that the migration is accomplished via a multicenter cyclic transition state.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 12, pp. 2836–2838, December, 1977.     

N,O-acylotropy in N-methylpentanehydroxamic acid

N-Methylpentanehydroxamic acid (N-methyl-N-pentanoylhydroxylamine) 1 rearranges into N-methyl-O-pentanoylhydroxylamine 2 through spontaneous N→O acyl migration.     

Gas-phase reactions and rearrangements of alkyl esters with H3O+, NO+, and O2*+: a selected ion flow tube study

Selected ion flow tube mass spectrometry (SIFT-MS) has been employed to study the ion-molecule reactions of 17 alkyl esters reacting with the common SIFT-MS reagent ions, H3O+, H3O+.nH2O (n = 1, 2, 3), NO+, and O2+. The majority of reactions were observed to proceed at or near collision rate, with the exception of H3O+.3H2O, which was found to be slow for 8 of 17 alkyl esters. Unexpected product ions in the form of the parent carboxylic acid cation were observed to arise from the H3O+ and NO+ reactions of some alkyl esters. The observed reactions have been probed by the ab initio CBS-4M and G2(MP2,SVP) methods. The postulated reaction pathway involves a 1,5 H atom migration from a beta-carbon onto the carbonyl oxygen.     

Photolysis of some unsymmetrical phosphinic azides in methanol: Relative migratory aptitudes of alkyl groups and phenyl in the curtius-like rearrangement

When an alkylphenylphosphinic acid PRhP(O)N₃ (R = Me, Et, Prⁱ, or Bu^t) is photolysed in MeOH either the alkyl or phenyl group can migrate from P to N in the Curtius-like rearrangement. The composition of the product shows that migration of the alkyl group R is preferred. However, the preference is not great and decreases as R changes Bu^t→Prⁱ→Et→Me (approx. migratory aptitudes relative to Ph: 2.1, 1.7, 1.3 and 1.2 respectively), probably because the PhP bond is better able to assume the correct conformation for Ph migration when R is less bulky. For t-butylmethylphosphic azide there is very little preference for migration of Bu^t relative to Me. Small amounts of unrearranged products such as Bu^tPhP(O)NHOMe and Bu^tPhP(O)NH₂ are generally produced in the photolyses, together with the methyl phosphinates RPhP(O)OMe (major product when R = Me) resulting from (non-photochemical) solvolysis of the azide.     

Determination of Amoxycillin and Clavulanic Acid in Some Pharmaceutical Preparations by Derivative Spectrophotometry

 Derivative spectrophotometry was applied for the simultaneous determination of amoxycillin and clavulanic acid in pharmaceutical preparations: “Augmentin” inj. and tablets and “Amoksiklav” drops and tablets, in solutions after hydrolysis with sodium hydroxide. As the absorption spectra overlap strongly (amoxycillin λ_max = 247 nm and 290 nm, clavulanic acid λ_max = 258 nm) the first and the second derivative spectrophotometric procedure was elaborated for their determination. Amoxycillin was determined at λ = 257.9 nm (1-st derivative spectra) or λ = 273 nm (2-nd derivative) while clavulanic acid at λ = 280.3 nm (1-st derivative) or λ = 285 nm (2-nd derivative spectra). The Beer’s law is obeyed in the range of 0.004–0.04 mg/ml for amoxycillin and 0.002–0.02 mg/ml for clavulanic acid. Received December 6, 1999. Revision August 1, 2000.     

Photoionization-induced water migration in the hydrated trans-formanilide cluster cation revealed by gas-phase spectroscopy and ab initio molecular dynamics simulation

Photoionization-induced water migration in the trans-formanilide-water 1:1 cluster, FA-(H(2)O)(1), has been investigated by using IR-dip spectroscopy, quantum chemical calculations, and ab initio molecular dynamics simulations. In the S(0) state, FA-(H(2)O)(1) has two structural isomers, FA(NH)-(H(2)O)(1) and FA(CO)-(H(2)O)(1), where a water molecule is hydrogen-bonded (H-bonded) to the NH group and the CO group, respectively. In addition, the S(1)-S(0) origin transition of FA(CO)-(H(2)O)(2), where a water dimer is H-bonded to the CO group, was observed only in the [FA-(H(2)O)(1)](+) mass channel, indicating that one of the water molecules evaporates completely in the D(0) state. These results are consistent with a previous report [Robertson, E. G. Chem. Phys. Lett., 2000, 325, 299]. In the D(0) state, however, [FA-(H(2)O)(1)](+) produced by photoionization via the S(1)-S(0) origin transitions of FA(NH)-(H(2)O)(1) and FA(CO)-(H(2)O)(1) shows essentially the same IR spectra. Compared with the theoretical calculations, [FA-(H(2)O)(1)](+) can be assigned to [FA(NH)-(H(2)O)(1)](+). This means that the water molecule in [FA-(H(2)O)(1)](+) migrates from the CO group to the NH group when [FA-(H(2)O)(1)](+) is produced by photoionization of FA(CO)-(H(2)O)(1). [FA-(H(2)O)(1)](+) produced by photoionization of FA(CO)-(H(2)O)(2) also shows the IR spectrum corresponding to [FA(NH)-(H(2)O)(1)](+). In this case, the water migration from the CO group to the NH group occurs with the evaporation of a water molecule. Ab initio molecular dynamics simulations revealed the water migration pathway in [FA-(H(2)O)(1)](+). The calculations of classical electrostatic interactions show that charge-dipole interaction between FA(+) and H(2)O induces an initial structural change in [FA-(H(2)O)(1)](+). An exchange repulsion between the lone pairs of the CO group and H(2)O in [FA-(H(2)O)(1)](+) also affects the initial direction of the water migration. These two factors play important roles in determining the initial water migration pathway.     

Density functional theory studies on the mechanism of the reduction of CO2 to CO catalyzed by copper(I) boryl complexes

The detailed reaction mechanism for the reduction of CO2 to CO catalyzed by (NHC)Cu(boryl) complexes (NHC = N-heterocyclic carbene) was studied with the aid of DFT by calculating the relevant intermediates and transition state structures. Our DFT calculations show that the reaction occurs through CO2 insertion into the Cu-B bond to give a Cu-OC(=O)-boryl species (i.e., containing Cu-O and C-B bonds), and subsequent boryl migration from C to O, followed by alpha-bond metathesis between pinB-Bpin (B2pin2, pin = pinacolate = OCMe2CMe2O) and (NHC)Cu(OBpin). The overall reaction is exergonic by 38.0 kcal/mol. It is the nucleophilicity of the Cu-B bond, a function of the very strong alpha-donor properties of the boryl ligand, rather than the oxophilicity of boron, which determines the direction of the CO2 insertion process. The boryl migration from C to O, which releases the product CO, is the rate-determining step and involves the "vacant" orbital orbital on boron. The (NHC)Cu(boryl) complexes show unique activity in the catalytic process. For the analogous (NHC)Cu(alkyl) complexes, the CO2 insertion into the Cu-C bond giving a copper acetate intermediate occurs with a readily achievable barrier. However, the elimination of CO from the acetate intermediate through a methyl migration from C to O is energetically inaccessible.     

Near-edge X-ray absorption fine structure study of disordering in Gd2(Ti1-yZry)2O7 pyrochlores

Disorder in Gd2(Ti(1-y)Zry)2O7 pyrochlores, for y = 0.0-1.0, is investigated by Ti 2p and O 1s near-edge X-ray absorption fine structure spectroscopy. Ti(4+) ions are found to occupy octahedral sites in Gd2Ti2O7 with a tetragonal distortion induced by vacant oxygen sites. As Zr substitutes for Ti, the tetragonal distortion decreases, and Zr coordination increases from 6 to 8. The migration of oxygen ions from 48f or 8b sites to vacant 8a sites compensate for the increased Zr coordination, thereby reducing the number of vacant 8a sites, which further reduces the tetragonal distortion and introduces more disorder around Ti. This is evidence for simultaneous cation disorder with anion migration.     

Investigation of the neutral loss of a full amino acid mass during collision-induced dissociation of the b(3)+ ion derived from a model peptide containing a 4-aminobutyric acid residue

In a previous study we found that a dominant fragmentation pathway observed for collision-induced dissociation (CID) of b(3)+ derived from peptides with sequence AXAG, where X is gamma-aminobutyric acid (gammaAbu) or epsilon-aminocaproic acid (Cap), involved the loss of 89 mass units (u). A neutral loss of 89 u corresponded to the free acid mass of an alanine (A) residue. This specific pathway was studied in greater detail here using a series of A(gammaAbu)AG peptides with strategic positioning of (15)N, (13)C and (2)H isotope labels. Based on the extensive labeling, several possible routes to the net elimination of 89 u are proposed. One is based on initial elimination of either aziridinone or imine and CO, followed by opening of an oxazolinone, tautomerization and elimination of H2O. Another involves formation of an aziridinone by cleavage of the N-terminal amide bond, and transfer of O and H atoms to this fragment via an H-bonded ion-molecule complex to complete the loss of 89 u. Both types of pathway include the transfer/migration of H atoms from the alpha-carbon position of gammaAbu or A residues.     

Adsorption and migration growth of the Ce,O, and F adatoms on the CeO2 (111) surface: A density functional theory study

In order to investigate the microscopic behavior of the crystal surface growth of the fluorinated cerium dioxide polishing powder, the adsorption and migration of the Ce, O, and F atoms on the CeO₂ (111) surface were studied by using density functional theory with Hubbard correction +U. The adsorption energies of three single atoms at five high-symmetry sites and the migration activation energies along the migration pathway on the CeO₂ (111) surface were calculated. Results show that the most stable adsorption sites of the Ce, O, and F atoms were the O_h, Ce_bri, and Ce_t sites, respectively. The Ce atom migrated from the O_h to the O_t site. The O atom migrated from the Ce_bri to the O_bri site. The F atom migrated from the Ce_t to the O_h site. The migration activation energies of the Ce, O, and F atoms along the migration pathways were 1.526, 0.597, and 0.263 eV, respectively. The F adatom does not change the spatial configuration of the Ce and the O atoms. When the O vacancy occurs on the CeO₂ (111) surface, the F adatom can make up for the O vacancy defect.     

氧化碳烟的MnOx(0.4)-CeO2催化剂表面活性物种研究

采用柠檬酸配合燃烧法和共沉淀法制备了MnOx(0.4)-CeO2催化剂,用于模拟碳烟的燃烧.通过XRD、BET、Raman、H2-TPR、O2-TPD与XPS表征催化剂的结构和表面活性物种,并借助原位拉曼研究碳烟的催化氧化机理.结果表明柠檬酸配合燃烧法制备的MnOx(0.4)-CeO2-CA催化剂中有更多的Mn进入了CeO2的立方萤石结构,比表面积更大,氧空位、Mn4+和Ce4+更多,因而氧化还原性能更好,催化氧化碳烟的活性更高.O-在碳烟的氧化中起重要作用,Mn4+和Ce4+有利于氧化反应的进行,氧空位的增加能提高氧的吸附、迁移和转化能力,促进了碳烟的氧化.反应路径为O-溢出参与碳烟的氧化,同时产生氧空位,部分晶格氧O2-补充O-,气相氧不断吸附到氧空位上得到活化生成O2-,O2-转化为O-(可进一步转化为O2-),O-迁移至碳烟颗粒表面参与反应,生成CO2.     

First-principles calculations of migration energy of lithium ions in halides and chalcogenides

Migration of Li+ ions via the vacancy mechanism in LiX (X = F, Cl, Br, and I) with the rocksalt and hypothetical zinc blende structures and Li2X (X = O, S, Se, and Te) with the antifluorite structure has been investigated using first-principles projector augmented wave calculations with the generalized gradient approximation. The migration paths and energies, determined by the nudged-elastic-band method, are discussed on the basis of two idealized models: the rigid-sphere and charged-sphere models. The trajectories and energy profiles of the migration in these lithium compounds vary between these two models, depending on the anion species and crystal structure. The migration energies in LiX with both the rocksalt and hypothetical zinc blende structures show a tendency to decrease with increasing periodic number of the anion species in the periodic table. This is consistent with the widely accepted view that anion species with large ionic radii and high polarizabilities are favorable for good ionic conduction. In contrast, Li2O exhibits the lowest migration energy among Li2X compounds, although O is the smallest among the chalcogens, indicating that electrostatic attractive interactions play the dominant role in the inter-ion interactions in Li2O and, therefore, in the ion migration.     

Direct Synthesis of Acetic Acid from CH4 and CO2 in the Presence of O2 over a V2O5-PdCl2／Al2O3 Catalyst

The possibility of synthesizing acetic acid from CH4 and CO2 in the presence of O2 over a V2O5-PdCl2/Al2O3 catalyst has been explored. The result shows that it is feasible in catalyzing a direct conversion of CH4, CO2 and O2 to acetic acid. It is concluded that both CO2 and O2 are involved in the formation of acetic acid.     

Equilibrium between a vinylogous ylide and a phosphonium dienolate zwitterion: vinylogous Wittig olefination versus vinylogous aldol-type reaction

This paper describes the equilibrium established between a phosphonium dienolate zwitterion and a vinylogous phosphorus ylide, and their reactions with aldehydes. The reactions between ethyl 2-methyl-2,3-butadienoate and various aldehydes occur through either a phosphonium dienolate or a vinylogous ylide intermediate, depending on the presence/absence of a Lewis acid and the nature of the phosphine. We observed a rare vinylogous Wittig olefination from the reaction between ethyl 2-methyl-2,3-butadienoate and an electron-deficient aromatic aldehyde in the presence of a stoichiometric amount of an electron-deficient triarylphosphine and a catalytic amount of a Lewis acid (e.g., BF₃·Et₂O). On the other hand, the use of triphenylphosphine, in the absence of a Lewis acid, facilitated vinylogous aldol addition, accompanied by a rare 1,2-aryl phosphorus-to-carbon migration.     

Determination of bisphenol A diglycidyl ether and its hydrolysis and chlorohydroxy derivatives by liquid chromatography-mass spectrometry

European Legislation establishes that the sum of the migration levels of bisphenol A diglycidyl ether (BADGE), its hydrolysis (BADGE.H2O and BADGE.2H2O) and chlorohydroxy (BADGE.HCl, BADGE.2HCl and BADGE.H2O.HCl) derivatives shall not exceed the limit of 1 mg/kg in foodstuffs or food simulants. A reversed-phase high-performance liquid chromatographic (RP-HPLC) method combined with mass spectrometry detection using atmospheric pressure chemical ionisation (APCI) is developed for the separation, quantification and identification of the interesting compounds. Quantification of the analytes was carried out in the single ion recording mode, once their characteristic masses were selected from their full spectra, by using an external calibration. The optimised method was suitable for the migration evaluation of these compounds in different samples.     

Mono- and dinuclear zinc complexes derived from unsymmetric binucleating ligands: synthesis, characterization, and formation of tetranuclear arrays

Zinc complexes of the unsymmetric, binucleating Schiff base ligands 3-(N-[2-(dimethylamino)ethyl]iminomethyl)-salicylic acid (H2L1) and 3-[N-(2-pyridylmethyl)iminomethyl]-salicylic acid (H2L2) have been studied in the solid state as well as in solution. Reaction of ZnX2 (X = NO3-, CH3CO2-) with 3-formylsalicylic acid and N,N-dimethylethylenediamine at neutral or slightly acidic pH afforded the dinuclear complexes [Zn2(HL1)2(H2O)2](NO3)2.2H2O (1a) and [Zn2(HL1)2(CH3CO2)2].6H2O (1b). The Zn ions, which are 3.126(1) A (1a) and 3.2665(7) A (1b) apart, are bridged by two phenolate oxygens. Further coordination sites of the ligand are the imine nitrogen and carboxylate oxygen, while the amino nitrogen is protonated. On dissolution in DMSO or DMF, 1a and 1b are converted into the mononuclear species [Zn(HL1)]+. Cleavage of the dinuclear complexes is accompanied by migration of the ammonium proton to the carboxylate group and coordination of the amino nitrogen to Zn. Reaction of 1b with base yielded the novel tetranuclear Zn complex [Zn4(L1)4].6.5H2O (2) that exhibits coordination number asymmetry. The four Zn ions having N2O3 and N2O4 coordination environments are located at the corners of a nearly square-planar rectangle. H2L2 binds Zn via the phenolate oxygen and, imine and pyridine nitrogens in acidic solution. Deprotonation of the carboxyl group in alkaline solution gave the tetranuclear compound [Zn4(L2)4].4.5H2O (4) with a cubane-like Zn4O4 core.