亲水作用色谱-串联质谱法同时测定液态奶中三聚氰酸和三聚氰胺

建立了亲水作用色谱-串联质谱同时测定液态奶中三聚氰酸和三聚氰胺的方法。液态奶样品经体积分数2.5%甲酸溶液提取、离心后乙腈稀释,亲水作用色谱柱分离,电喷雾串联四极杆质谱检测器检测,分别在负、正离子模式下测定三聚氰酸和三聚氰胺。三聚氰酸和三聚氰胺分别在0.5～100μg/L、0.1～50μg/L范围内线性关系良好。在0.25～15mg/kg、0.1～7.5mg/kg添加水平范围内,三聚氰酸平均回收率为84.5%～98.0%(RSD为2.1%～6.1%),三聚氰胺平均回收率为85.5%～88.9%(RSD为3.2～5.8%)。三聚氰酸、三聚氰胺定量限分别为0.25mg/kg、0.1mg/kg。     

亲水作用色谱-串联质谱法测定化妆品中三聚氰胺残留量

建立了化妆品中三聚氰胺的亲水作用色谱-质谱联用（HILIC-MS/MS）检测方法。样品经三氯乙酸溶液提取（脂溶性样品再经正己烷萃取)后,用混合型阳离子交换(MCX)反相固相萃取柱富集净化,用5 mmol/L乙酸铵水溶液(含0.1%甲酸)和乙腈作为流动相,以梯度洗脱方式在ZIC-HILIC色谱柱上实现分离,以电喷雾离子源正离子(ESI+)模式进行质谱分析。三聚氰胺在0.02～0.5 mg/L范围内呈良好线性关系,相关系数为0.9985;方法的检出限(LOD,信噪比(S/N)≥3)为5.0 μg/kg,定量限(LOQ,S/N＞10)为20.0 μg/kg;在0.01～0.1 mg/kg添加浓度范围内,三聚氰胺的平均回收率为84.7%～93.4%,相对标准偏差为4.5%～8.4%。该方法能满足化妆品中三聚氰胺残留量的检测。     

亲水作用色谱-电喷雾串联质谱法检测原料奶及奶制品中的三聚氰胺

建立了亲水作用色谱-电喷雾串联质谱测定原料奶及奶制品中三聚氰胺的方法。样品采用1%三氯乙酸水溶液-乙腈（体积比为1∶1）混合溶液提取,混合型阳离子交换反相固相萃取柱（MCX）富集净化,亲水作用色谱柱分离,电喷雾串联四极杆质谱仪进行检测。结果表明,三聚氰胺的质量浓度在0.05～10.0 mg/L范围内具有良好的线性关系。原料奶及奶制品中的三聚氰胺在0.5,2.5和10 mg/kg 3个添加水平下,平均回收率为76.3%～98.7%,相对标准偏差均小于6.8%;定量限（S/N＞10）为0.05 mg/kg。     

液相色谱-质谱/质谱法对多种食品基体中三聚氰胺的检测

采用超声、振荡、液液萃取、离心等方法提取14种复杂食品基体中的三聚氰胺,提取液经阳离子交换固相萃取柱净化后,采用液相色谱-质谱/质谱法测定多种食品基体中的三聚氰胺.涉及的食品基体包括豆类制品、饮料、糕点、含乳饼干、鲜蛋、蛋制品和调味品6类基体14种食品.方法的检出限为0.005 ～0.012 5 mg/kg,回收率为75% ～115%,RSD小于18%;定量下限为0.025 ～0.062 5 mg/kg,回收率为84% ～106%,RSD小于10%.中、高浓度添加回收率为82% ～110%,RSD小于12%.方法灵敏、准确、有效.     

固相萃取-液相色谱-串联质谱法检测食品中的三聚氰胺

样品经均质,1%三氯乙酸溶液提取,用OASIS MCX固相萃取小柱净化,减压浓缩后以甲醇溶解定容,用Waters BEH-C8柱分离,乙腈和水为流动相,经液相色谱-串联质谱法检测.三聚氰胺线性范围为0.1～10.0mg/kg,相关系数r为0.9999,平均回收率为71%～95%,相对标准偏差为4.56%～9.82%(n=6),方法的栓出限为0.5 mg/kg.     

高效液相色谱法测定含脂羊毛中灭蝇胺和环虫腈

建立了高效液相色谱法(HPLC)测定含脂羊毛中的灭蝇胺和环虫腈的方法及HPLC-MS/MS确证方法。样品用80mL1%三氯乙酸溶液超声提取,MCX柱净化,Hypersil NH2色谱柱分离,水-乙腈为流动相梯度洗脱,214nm检测,HPLC-MS/MS确证。在正离子电喷雾电离(ESI+)模式下,环虫腈[M+H]+及2个主要的特征离子分别为m/z191.0,150.0和163.0;灭蝇胺[M+H]+及2个主要的特征离子分别为m/z167.0,85.0和125.0。在0.05～5.0mg/L范围内,灭蝇胺和环虫腈均有良好的线性关系,相关系数均为0.9999。本方法的检出限灭蝇胺为0.02mg/kg,环虫腈为0.01mg/kg。方法的平均加标回收率:灭蝇胺为95.0%～99.9%,环虫腈为83.6%～92.2%。     

气相色谱-质谱法快速测定牛奶中的三聚氰胺和三聚氰酸

建立了气相色谱-质谱法测定牛奶中三聚氰胺和三聚氰酸含量的分析方法。样品经二乙胺-乙腈-水溶液超声提取,离心,滤液用氮气吹干后加入硅烷化衍生试剂衍生,气相色谱-质谱测定,选择离子模式监测,外标法定量。在0.025～2 mg/kg范围内,目标物的峰面积与其质量浓度的线性关系良好(r>0.98);在0.5,1.0和2.5 mg/kg的添加水平,三聚氰胺和三聚氰酸的平均回收率分别为84%～87%和75%～102%,相对标准偏差(RSD)分别为5.7%～11.7%和4.9%～7.8%;三聚氰胺和三聚氰酸的检出限(LOD)分别为0.05 mg/kg和0.10 mg/kg。结果表明:该方法简便、快速、灵敏、准确,适合牛奶中三聚氰胺和三聚氰酸的确证和定量测定。     

气相色谱-质谱法测定鸡蛋中三聚氰胺

建立了气相色谱-质谱法测定鸡蛋中三聚氰胺的方法. 鸡蛋样品经三氯乙酸提取,乙酸铅沉淀蛋白后,过MCX阳离子交换固相萃取小柱除去样品基质干扰,用N,O-双三甲基硅基三氟乙酰胺(BSTFA)+三甲基氯硅烷(TMCS)(99+1)衍生,进行气相色谱-质谱分析. 在0.010~2.00 mg/L浓度范围内,线性关系良好(r=0.9996),检出限为0.01 mg/kg. 方法回收率为90.1%~94.7%,RSD为1.7%~5.3%. 方法准确、灵敏,适用于鸡蛋中三聚氰胺的检测.     

应用亲水作用色谱检测鸡蛋和肉中三聚氰胺及三聚氰酸二酰胺

应用亲水作用色谱(HILIC)对从市场上购买的鸡蛋和肉中的三聚氰胺及三聚氰胺降解产物三聚氰酸二酰胺进行了检测。采用的色谱柱为ZIC-HILIC柱,流动相为3 mmol/L磷酸二氢铵溶液(pH 6.9)-乙腈(20:80, v/v),流速为0.8 mL/min,检测波长为220 nm。在该体系下,三聚氰胺和三聚氰酸二酰胺的保留时间适中,与样品中的内源性物质有良好的分离。样品经0.1%磷酸提取,偏磷酸及乙腈沉淀蛋白质和糖类物质,以及P-SCX固相萃取柱净化。三聚氰胺和三聚氰酸二酰胺在0.4～40 mg/L范围内与峰面积呈良好的线性关系,样品定量限(按信噪比(S/N)不小于10计)为2 mg/kg,在2～10 mg/kg添加水平下的平均回收率为80%～105%,相对标准偏差小于10%。该方法具有良好的分离选择性,可用于鸡蛋和肉中三聚氰胺和三聚氰酸二酰胺的同时检测。     

气相色谱-质谱联用法同时测定乳及乳制品中的三聚氰胺及肌酐

建立了同时测定乳制品中三聚氰胺及肌酐的气相色谱-质谱联用方法。样品经1%三氯乙酸溶液萃取,混合型阳离子交换固相萃取净化,提取液用氮气吹干后加入N,O-双(三甲基硅基)三氟乙酰胺-三甲基氯硅烷(BSTFA-TMCS)硅烷化试剂,于75 ℃下衍生60 min,最后采用选择离子模式下的气相色谱-质谱测定。三聚氰胺和肌酐的定量限分别为0.10 mg/kg和0.20 mg/kg;在0.1～50 mg/L范围内的线性相关系数均大于0.99。实际样品中,肌酐在10～100 mg/kg和三聚氰胺在0.1～5.0 mg/kg添加范围内的回收率分别为80.7%～116.8%和77.6%～107.5%,相对标准偏差分别小于9.4%和8.5%。该方法能有效除去干扰,灵敏度高,回收率较好,可用于乳制品中三聚氰胺和肌酐的同时测定。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.