Ruthenium Polypyridyl Complexes Hopping at Anionic Lipid Bilayers through a Supramolecular Bond Sensitive to Visible Light

The new ruthenium complex [Ru(terpy)(dcbpy)(Hmte)](PF(6) )(2) ([2](PF(6) )(2) ; dcbpy=6,6'-dichloro-2,2'-bipyridine, terpy=2,2';6',2"-terpyridine, Hmte=2-(methylthio)ethanol) was synthesized. In the crystal structure, this complex is highly distorted, revealing steric congestion between dcbpy and Hmte. In water, [2](2+) forms spontaneously by reacting Hmte and the aqua complex [Ru(terpy)(dcbpy)(OH(2) )](2+) ([1](2+) ), with a second-order rate constant of 0.025?s(-1) M(-1) at 25?°C. In the dark, the Ru?S bond of [2](2+) is thermally unstable and partially hydrolyzes; in fact, [1](2+) and [2](2+) are in an equilibrium characterized by an equilibrium constant K of 151?M(-1) . When exposed to visible light, the Ru?S bond is selectively broken to release [1](2+) , that is, the equilibrium is shifted by visible-light irradiation. The light-induced equilibrium shifts were repeated four times without major signs of degradation; the Ru?S coordination bond in [2](2+) can be described as a robust, light-sensitive, supramolecular bond in water. To demonstrate the potential of this system in supramolecular chemistry, a new thioether-cholesterol conjugate (4), which inserts into lipid bilayers through its cholesterol moiety and coordinates to ruthenium through its sulfur atom, was synthesized. Thioether-functionalized, anionic, dimyristoylphosphatidylglycerol (DMPG), lipid vesicles, to which aqua complex [1](2+) efficiently coordinates, were prepared. Upon exposure of the Ru-decorated vesicles to visible light, the Ru?S bond is selectively broken, thus releasing [1](2+) that stays at the water-bilayer interface. When the light is switched off, the metal complex spontaneously coordinates back to the membrane-embedded thioether ligands without a need to heat the system. This process was repeated four times at 35?°C, thus achieving light-triggered hopping of the metal complex at the water-bilayer interface.     

Kinetics and DFT studies on water oxidation by Ce4+ catalyzed by [Ru(terpy)(bpy)(OH2)]2+

The Ru(V)==O species and other intermediates in O(2) evolution from water catalyzed by [Ru(terpy)(bpy)(OH(2))](2+) were spectrophotometrically characterized, and the spectral components observed were identified based on the TD-DFT calculations. Moreover, important insights into the rapid paths after the RDS were given by the DFT studies.     

Structural, electronic, and acid/base properties of [Ru(bpy)2(bpy(OH)2)]2+ (bpy = 2,2'-bipyridine, bpy(OH)2 = 4,4'-dihydroxy-2,2'-bipyridine)

We have synthesized the complex [Ru(bpy)(2)(bpy(OH)(2))](2+) (bpy =2,2'-bipyridine, bpy(OH)(2) = 4,4'-dihydroxy-2,2'-bipyridine). Experimental results coupled with computational studies were utilized to investigate the structural and electronic properties of the complex, with particular attention paid toward the effects of deprotonation on these properties. The most distinguishing feature observed in the X-ray structural data is a shortening of the CO bond lengths in the modified ligand upon deprotonation. Similar results are also observed in the computational studies as the CO bond becomes double bond in character after deprotonating the complex. Electrochemically, the hydroxy-modified bipyridyl ligand plays a significant role in the redox properties of the complex. When protonated, the bpy(OH)(2) ligand undergoes irreversible reduction processes; however, when deprotonated, reduction of the substituted ligand is no longer observed, and several new irreversible oxidation processes associated with the modified ligand arise. pH studies indicate [Ru(bpy)(2)(bpy(OH)(2))](2+) has two distinct deprotonations at pK(a1) = 2.7 and pK(a2) = 5.8. The protonated [Ru(bpy)(2)(bpy(OH)(2))](2+) complex has a characteristic UV/Visible absorption spectrum similar to the well-studied complex [Ru(bpy)(3)](2+) with bands arising from Metal-to-Ligand Charge Transfer (MLCT) transitions. When the complex is deprotonated, the absorption spectrum is altered significantly and becomes heavily solvent dependent. Computational methods indicate that the deprotonated bpy(O(-))(2) ligand mixes heavily with the metal d orbitals leading to a new absorption manifold. The transitions in the complex have been assigned as mixed Metal-Ligand to Ligand Charge Transfer (MLLCT).     

Mechanistic investigation of CO2 hydrogenation by Ru(II) and Ir(III) aqua complexes under acidic conditions: two catalytic systems differing in the nature of the rate determining step

Ruthenium aqua complexes [(eta(6)-C(6)Me(6))Ru(II)(L)(OH(2))](2+) {L = bpy (1) and 4,4'-OMe-bpy (2), bpy = 2,2'-bipyridine, 4,4'-OMe-bpy = 4,4'-dimethoxy-2,2'-bipyridine} and iridium aqua complexes [Cp*Ir(III)(L)(OH(2))](2+) {Cp* = eta(5)-C(5)Me(5), L = bpy (5) and 4,4'-OMe-bpy (6)} act as catalysts for hydrogenation of CO(2) into HCOOH at pH 3.0 in H(2)O. The active hydride catalysts cannot be observed in the hydrogenation of CO(2) with the ruthenium complexes, whereas the active hydride catalysts, [Cp*Ir(III)(L)(H)](+) {L = bpy (7) and 4,4'-OMe-bpy (8)}, have successfully been isolated after the hydrogenation of CO(2) with the iridium complexes. The key to the success of the isolation of the active hydride catalysts is the change in the rate-determining step in the catalytic hydrogenation of CO(2) from the formation of the active hydride catalysts, [(eta(6)-C(6)Me(6))Ru(II)(L)(H)](+), to the reactions of [Cp*Ir(III)(L)(H)](+) with CO(2), as indicated by the kinetic studies.     

Study of the ligand substitution reactions of cis,cis-[(bpy)(2)(L)RuORu(L')(bpy)(2)](n+) (L,L' = H(2)O,OH(-), NH(3)) using electrospray ionization mass spectrometry and (1)H NMR

We have successfully applied electrospray ionization mass spectrometry (ESI-MS) and (1)H NMR analyses to study ligand substitution reactions of mu-oxo ruthenium bipyridine dimers cis,cis-[(bpy)(2)(L)RuORu(L')(bpy)(2)](n+) (bpy = 2,2'-bipyridine; L and L' = NH(3), H(2)O, and HO(-)) with solvent molecules, that is, acetonitrile, methanol, and acetone. The results clearly show that the ammine ligand is very stable and was not substituted by any solvents, while the aqua ligand was rapidly substituted by all the solvents. In acetonitrile and acetone solutions, the substitution reaction of the aqua ligand(s) competed with a deprotonation reaction from the ligand. The hydroxyl ligand was not substituted by acetonitrile or acetone, but it exchanged slowly with CH(3)O(-) in methanol. The substitution reaction of the aqua ligands in [(bpy)(2)(H(2)O)Ru(III)ORu(III)(H(2)O)(bpy)(2)](4+) was more rapid than that of the hydroxyl ligand in [(bpy)(2)(H(2)O)Ru(III)ORu(IV)(OH)(bpy)(2)](4+). In methanol, slow reduction of Ru(III) to Ru(II) was observed in all the mu-oxo dimers, and the Ru-O-Ru bridge was then cleaved to give mononuclear Ru(II) complexes.     

cis-Bis(bipyridine)ruthenium Imidazole Derivatives: A Spectroscopic, Kinetic, and Structural Study

The ruthenium bis(bipyridine) complexes cis-[Ru(bpy)(2)Im(OH(2))](2+), cis-[Ru(bpy)(2)(Im)(2)](2+), cis-[Ru(bpy)(2)(N-Im)(2)](2+), cis-[Ru(dmbpy)(2)Im(OH(2))](2+), cis-[Ru(dmbpy)(2)(N-Im)(OH(2))](2+)(bpy = 2,2'-bipyridine, dmbpy = 4,4'-dimethyl-2,2'-bipyridine, Im = imidazole, N-Im = N-methylimidazole), have been synthesized under ambient conditions in aqueous solution (pH 7). Their electrochemical and spectroscopic properties, absorption, emission, and lifetimes were determined and compared. The substitution kinetics of the cis-[Ru(bpy)(2)Im(OH(2))](2+) complexes show slower rates and have lower affinities for imidazole ligands than the corresponding cis-[Ru(NH(3))(4)Im(OH(2))](2+) complexes. The crystal structures of the monoclinic cis-[Ru(bpy)(2)(Im)(2)](BF(4))(2), space group = P2(1)/a, Z = 4, a = 11.344(1) ?, b = 17.499(3) ?, c = 15.114(3) ?, and beta = 100.17(1) degrees, and triclinic cis-[Ru(bpy)(2)(N-Im)(H(2)O)](CF(3)COO)(2).H(2)O, space group = P&onemacr;, Z = 2, a = 10.432(4) ?, b = 11.995(3) ?, c = 13.912(5) ?, alpha = 87.03(3) degrees, beta = 70.28(3) degrees, and gamma = 71.57(2) degrees, complexes show that these molecules crystallize as complexes of octahedral Ru(II) to two bidentate bipyridine ligands with two imidazole ligands or a water and an N-methylimidazole ligand cis to each other. The importance of these molecules is associated with their frequent use in the modification of proteins at histidine residues and in comparisons of the modified protein derivatives with these small molecule analogs.     

Surface control of oxidation by an adsorbed Ru(IV)-oxo complex.

When adsorbed to optically transparent, thin films of TiO(2) nanoparticles on glass, the aqua complex [Ru(II)(tpy)(bpy(PO(3)H(2))(2))(OH(2))](2+) (bpy(PO(3)H(2))(2) is 2,2'-bipyridyl-4,4'-diphosphonic acid; tpy is 2,2':6',2' '-terpyridine) is oxidized by Ce(IV)(NH(4))(2)(NO(3))(6) in 0.1 M HClO(4) to its Ru(IV)=O(2+) form as shown by UV-visible measurements and analysis of oxidative equivalents by oxidation of hydroquinone to quinone. Kinetic studies on the oxidations of cyclohexene, benzyl alcohol, phenol, and trans-stilbene by surface-bound Ru(IV)=O(2+) by UV-visible monitoring reveal direct evidence for initial 2-electron steps to give Ru(II) intermediates in all four cases. These steps are masked in solution where Ru(IV) --> Ru(II) reduction is followed by rapid reactions between Ru(II) intermediates and Ru(IV)=O(2+) to give Ru(III). Reactions between Ru(II) and Ru(IV)=O(2+) on the surface are inhibited by binding to the surface, which restricts translational mobility. Rate constants on the surface and in solution are comparable, pointing to comparable reactivities. The surface experiments give unprecedented insight into oxidation mechanism with important implications for achieving product selectivity in synthesis by limiting oxidation to two electrons.     

Hydride ion transfer from ruthenium(II) complexes in water: kinetics and mechanism

Reactions of hydride complexes of ruthenium(II) with hydride acceptors have been examined for Ru(terpy)(bpy)H(+), Ru(terpy)(dmb)H(+), and Ru(η(6)-C(6)Me(6))(bpy)(H)(+) in aqueous media at 25 °C (terpy = 2,2';6',2'-terpyridine, bpy = 2,2'-bipyridine, dmb = 4,4'-dimethyl-2,2'-bipyridine). The acceptors include CO(2), CO, CH(2)O, and H(3)O(+). CO reacts with Ru(terpy)(dmb)H(+) with a rate constant of 1.2 (0.2) × 10(1) M(-1) s(-1), but for Ru(η(6)-C(6)Me(6))(bpy)(H)(+), the reaction was very slow, k ≤ 0.1 M(-1) s(-1). Ru(terpy)(bpy)H(+) and Ru(η(6)-C(6)Me(6))(bpy)(H)(+) react with CH(2)O with rate constants of (6 ± 4) × 10(6) and 1.1 × 10(3) M(-1) s(-1), respectively. The reaction of Ru(η(6)-C(6)Me(6))(bpy)(H)(+) with acid exhibits straightforward, second-order kinetics, with the rate proportional to [Ru(η(6)-C(6)Me(6))(bpy)(H)(+)] and [H(3)O(+)] and k = 2.2 × 10(1) M(-1) s(-1) (μ = 0.1 M, Na(2)SO(4) medium). However, for the case of Ru(terpy)(bpy)H(+), the protonation step is very rapid, and only the formation of the product Ru(terpy)(bpy)(H(2)O)(2+) (presumably via a dihydrogen or dihydride complex) is observed with a k(obs) of ca. 4 s(-1). The hydricities of HCO(2)(-), HCO(-), and H(3)CO(-) in water are estimated as +1.48, -0.76, and +1.57 eV/molecule (+34, -17.5, +36 kcal/mol), respectively. Theoretical studies of the reactions with CO(2) reveal a "product-like" transition state with short C-H and long M-H distances. (Reactant) Ru-H stretched 0.68 ?; (product) C-H stretched only 0.04 ?. The role of water solvent was explored by including one, two, or three water molecules in the calculation.     

An artificial model of photosynthetic photosystem II: visible-light-derived O2 production from water by a di-μ-oxo-bridged manganese dimer as an oxygen evolving center

Visible-light-derived O(2) production was yielded by conjugating water oxidation catalysis by [(OH(2))(terpy)Mn(μ-O)(2)Mn(terpy)(OH(2))](3+) as an oxygen evolving center model and photo-sensitization of [Ru(bpy)(3)](2+) as a photoexcitation center model at an interlayer of mica.     

Dimer-of-dimers model for the oxygen-evolving complex of photosystem II. Synthesis and properties of [MnIV4O5(terpy)4(H2O)2](ClO4)6

A dimer-of-dimers model compound for the oxygen-evolving complex of photosystem II, [[(H(2)O)(terpy)Mn(IV)(micro-O)(2)Mn(IV)(terpy)](2)(micro-O)](ClO(4))(6) (terpy = 2,2':6',2' '-terpyridine), has been prepared and characterized by X-ray crystallography and ESI-MS. Low pH was found to promote the disproportionation of [Mn(III/IV)(2)O(2)(terpy)(2)(OH(2))(2)](3+) to Mn(2+) and a Mn(IV/IV)(2)O(2)(terpy)(2) species; the latter complex slowly dimerizes to form the title complex. Protonation of a micro-oxo bridge is proposed to initiate the disproportionation, based on analogy with the [Mn(III/)(IV)(2)O(2)(bpy)(4)](3+) system.     

Water exchange rates in the diruthenium mu-oxo ion cis,cis-[(bpy)(2)Ru(OH(2))](2)O(4+).

Addition of 2 equiv of Ce(4+) to the dimeric ruthenium mu-oxo ion cis,cis-[(bpy)(2)Ru(OH(2))](2)O(4+) (formal oxidation state III-III, subsequently denoted [3,3]) or addition of 1 equiv of Ce(4+) to the corresponding [3,4] ion gave near-quantitative conversion to the [4,4] ion, confirming our recent assignment of this oxidation state as an accumulating intermediate during water oxidation by the cis,cis-[(bpy)(2)Ru(O)](2)O(4+) ([5,5]) ion. The rates of water exchange at the cis-aqua positions in the [3,3] and [3,4] ions were investigated by incubating H(2)(18)O-enriched samples in normal water for predetermined times, then oxidizing them to the [5,5] state and measuring by resonance Raman (RR) spectroscopy changes in the magnitudes of the O-isotope sensitive bands at 780 and 818 cm(-1). These bands have been assigned to Ru=(18)O and Ru=(16)O stretching modes, respectively, for ruthenyl bonds formed by deprotonation of the aqua ligands upon oxidation to the [5,5] state. An intermediate accumulated during the course of the isotope exchange reaction that gave a [5,5] ion possessing both approximately 782 and approximately 812 cm(-1) bands; this spectrum was assigned to the mixed-isotope species, (bpy)(2)Ru((16)O)(16)ORu((18)O)(bpy)(2)(4+). Kinetic analysis of solutions at various levels of oxidation indicated that only the [3,3] ion underwent substitution; the exchange rate constant obtained in 0.5 M trifluoromethanesulfonic acid, 23 degrees C, was 7 x 10(-3) s(-1), which is (10(3)-10(5))-fold larger than rate constants measured for anation of monomeric (bpy)(2)Ru(III)X(H(2)O)(3+) ions bearing simple sigma-donor ligands (X).     

cis-[Ru(2,2':6',2' '-terpyridine)(DMSO)Cl(2)]: useful precursor for the synthesis of heteroleptic terpyridine complexes under mild conditions

[Ru(II)(terpy)(DMSO)Cl(2)] complexes were synthesized as a 5/1 mixture of cis and trans isomers, and their reactivities with CO and with substituted 2,2':6',2' '-terpyridine (terpy) moieties have been investigated. The structure of a trans isomer and its CO adduct have been unambiguously assigned by spectroscopy and X-ray diffraction. The [Ru(terpy)(terpy-Br)](2+) complex prepared either from the cis-[Ru(II)(terpy)(DMSO)Cl(2)] or from the cis-[Ru(II)(terpy-Br)(DMSO)Cl(2)] precursor appeared to be reactive in cross-coupling reactions promoted by low-valent palladium(0) and is an attractive target for the stepwise synthesis of polynuclear complexes bearing vacant coordination sites (terpy-Br for 4'-bromo-2,2':6',2' '-terpyridine). Several bipyridine, phenanthroline, and bipyrimidine complexes were prepared this way and their optical and redox properties determined and discussed.     

An amide-linked chromophore-catalyst assembly for water oxidation

The synthesis and analysis of a new amide-linked, dinuclear [Ru(bpy)(2)(bpy-ph-NH-CO-trpy)Ru(bpy)(OH(2))](4+) (bpy = 2,2'-bipyridine; bpy-ph-NH-CO-trpy = 4-(2,2':6',2"-terpyridin-4'-yl)-N-[(4'-methyl-2,2'-bipyridin-4-yl)methyl]benzamide) assembly that incorporates both a light-harvesting chromophore and a water oxidation catalyst are described. With the saturated methylene linker present, the individual properties of both the chromophore and catalyst are retained including water oxidation catalysis and relatively slow energy transfer from the chromophore excited state to the catalyst.     

Characterization of a stable ruthenium complex with an oxyl radical

The ruthenium oxyl radical complex, [Ru(II)(trpy)(Bu(2)SQ)O(.-)] (trpy = 2,2':6',2"-terpyridine, Bu(2)SQ = 3,5-di-tert-butyl-1,2-benzosemiquinone) was prepared for the first time by the double deprotonation of the aqua ligand of [Ru(III)(trpy)(Bu(2)SQ)(OH(2))](ClO(4))(2). [Ru(III)(trpy)(Bu(2)SQ)(OH(2))](ClO(4))(2) is reversibly converted to [Ru(III)(trpy)(Bu(2)SQ)(OH-)](+) upon dissociation of the aqua proton (pK(a) 5.5). Deprotonation of the hydroxo proton gave rise to intramolecular electron transfer from the resultant O(2-) to Ru-dioxolene. The resultant [Ru(II)(trpy)(Bu(2)SQ)O(.-)] showed antiferromagnetic behavior with a Ru(II)-semiquinone moiety and oxyl radical, the latter of which was characterized by a spin trapping technique. The most characteristic structural feature of [Ru(II)(trpy)(Bu(2)SQ)O(.-)] is a long Ru-O bond length (2.042(6) A) as the first terminal metal-O bond with a single bond length. To elucidate the substituent effect of a quinone ligand, [Ru(III)(trpy)(4ClSQ)(OH(2))](ClO(4))(2) (4ClSQ = 4-chloro-1,2-benzosemiquinone) was prepared and we compared the deprotonation behavior of the aqua ligand with that of [Ru(III)(trpy)(Bu(2)SQ)(OH(2))](ClO(4))(2). Deprotonation of the aqua ligand of [Ru(III)(trpy)(4ClSQ)(OH(2))](ClO(4))(2) induced intramolecular electron transfer from OH- to the [Ru(III)(4ClSQ)] moiety affording [Ru(II)(trpy)(4ClSQ)(OH.)]+, which then probably changed to [Ru(II)(trpy)(4ClSQ)O(.-)]. The antiferromagnetic interactions (J values) between Ru(II)-semiquinone and the oxyl radical for [Ru(II)(trpy)(Bu(2)SQ)O(.-)] and for [Ru(II)(trpy)(4ClSQ)O(.-)] were 2J = -0.67 cm(-1) and -1.97 cm(-1), respectively.     

Electronic modification of the [Ru(II)(tpy)(bpy)(OH(2))](2+) scaffold: effects on catalytic water oxidation

The mechanistic details of the Ce(IV)-driven oxidation of water mediated by a series of structurally related catalysts formulated as [Ru(tpy)(L)(OH(2))](2+) [L = 2,2'-bipyridine (bpy), 1; 4,4'-dimethoxy-2,2'-bipyridine (bpy-OMe), 2; 4,4'-dicarboxy-2,2'-bipyridine (bpy-CO(2)H), 3; tpy = 2,2';6',2'-terpyridine] is reported. Cyclic voltammetry shows that each of these complexes undergo three successive (proton-coupled) electron-transfer reactions to generate the [Ru(V)(tpy)(L)O](3+) ([Ru(V)=O](3+)) motif; the relative positions of each of these redox couples reflects the nature of the electron-donating or withdrawing character of the substituents on the bpy ligands. The first two (proton-coupled) electron-transfer reaction steps (k(1) and k(2)) were determined by stopped-flow spectroscopic techniques to be faster for 3 than 1 and 2. The addition of one (or more) equivalents of the terminal electron-acceptor, (NH(4))(2)[Ce(NO(3))(6)] (CAN), to the [Ru(IV)(tpy)(L)O](2+) ([Ru(IV)=O](2+)) forms of each of the catalysts, however, leads to divergent reaction pathways. The addition of 1 eq of CAN to the [Ru(IV)=O](2+) form of 2 generates [Ru(V)=O](3+) (k(3) = 3.7 M(-1) s(-1)), which, in turn, undergoes slow O-O bond formation with the substrate (k(O-O) = 3 × 10(-5) s(-1)). The minimal (or negligible) thermodynamic driving force for the reaction between the [Ru(IV)=O](2+) form of 1 or 3 and 1 eq of CAN results in slow reactivity, but the rate-determining step is assigned as the liberation of dioxygen from the [Ru(IV)-OO](2+) level under catalytic conditions for each complex. Complex 2, however, passes through the [Ru(V)-OO](3+) level prior to the rapid loss of dioxygen. Evidence for a competing reaction pathway is provided for 3, where the [Ru(V)=O](3+) and [Ru(III)-OH](2+) redox levels can be generated by disproportionation of the [Ru(IV)=O](2+) form of the catalyst (k(d) = 1.2 M(-1) s(-1)). An auxiliary reaction pathway involving the abstraction of an O-atom from CAN is also implicated during catalysis. The variability of reactivity for 1-3, including the position of the RDS and potential for O-atom transfer from the terminal oxidant, is confirmed to be intimately sensitive to electron density at the metal site through extensive kinetic and isotopic labeling experiments. This study outlines the need to strike a balance between the reactivity of the [Ru═O](z) unit and the accessibility of higher redox levels in pursuit of robust and reactive water oxidation catalysts.     

Fullerene polypyridine ligands: synthesis, ruthenium complexes, and electrochemical and photophysical properties

Fullerene coordination ligands bearing one bipyridine or terpyridine unit were synthesized, and their coordination to ruthenium(II) formed linear rod-like donor-acceptor systems. Steady-state fluorescence of [Ru(bpy)(2)(bpy-C(60))](2+) showed a rapid solvent-dependent, intramolecular quenching of the ruthenium(II) MLCT excited state. Time-resolved flash photolysis in CH(3)CN revealed characteristic transient absorption changes that have been ascribed to the formation of the C(60) triplet state, suggesting that photoexcitation of [Ru(bpy)(2)(bpy-C(60))](2+) results in a rapid intramolecular transduction of triplet excited state energy. The electrochemical studies on both [Ru(bpy)(2)(bpy-C(60))](2+) and [Ru(tpy)(tpy-C(60))](2+) indicated electronic coupling between the metal center and the fullerene core.     

Structural, redox, and photophysical studies of the tetra(pyridyl)porphyrin complex containing four (2,2'-bipyridine)(2,2':6',2"-terpyridine)ruthenium(II) groups

New hybrid complexes of polypyridyl ruthenium and pyridylporphyrins have been prepared by the coordination of pyridyl nitrogens to the ruthenium centers. A 1:4 hybrid complex, [{Ru(bpy)(trpy)}4(mu4-H2Py4P)]8+ ([1]8+) (bpy = 2,2'-bipyridine; trpy = 2,2':6',2"-terpyridine; H2Py4P = 5,10,15,20-tetra(4-pyridyl)porphyrin), has been characterized by the single-crystal X-ray diffraction method. A 1:1 complex, [{Ru(bpy)(trpy)}(H2PyT3P)]2+ ([2]2+) (H2PyT3P = 5-(4-pyridyl)tritolylporphyrin) has also been prepared. The Soret band of the porphyrin ring shifts to longer wavelength with some broadening, the extent of the shift being larger for [1]8+. Cyclic voltammograms of the two complexes show simple overlap of the component redox waves. The complexes are weakly emissive at room temperature, which becomes stronger at lower temperatures. While [1]8+ at >140 K and [2]2+ at 77-280 K show only porphyrin fluorescence, [1]8+ at <140 K shows ruthenium and porphyrin phosphorescence, in addition to the porphyrin fluorescence.     

Crystal structures of [Ru(terpy)(HPB)(H2O)](PF6)2 and [Ru(terpy)(HPB)(2-picoline)](PF6) and the kinetics studies of the aqua ligand substitution by pyridine and substituted pyridines

The crystal structures of [Ru(terpy)(HPB)(H₂O)](PF₆)₂, 1, and [Ru(terpy)(HPB)(2-picoline)](PF₆), 2, (where terpy = 2,2′:6′,2′′-terpyridine and HPB = 2-(2′-hydroxyphenyl)-benzoxazole) have been determined. Both structures show slightly distorted octahedral coordination around the ruthenium center. In complex 1, the imine nitrogen of the HPB ligand occupies an axial position and is trans to the aqua ligand whereas in complex 2, the imine nitrogen is trans to the nitrogen of the 2-picoline ligand. The Ru-N(2-picoline) bond distance is much longer than the other Ru-N bonds in the complex due to steric effects from the methyl group of 2-picoline. In both complexes, the phenolate oxygen of the HPB ligand is in the equatorial position and trans to the center nitrogen of the terpyridine. The reaction of [Ru(terpy)(HPB)(H₂O)](PF₆)2 with pyridine and its analogs, 2-picoline and 4-picoline in dichloromethane was monitored spectrophotometrically. There is an initial reduction of the [Ru(III)-H₂O] complex to [Ru(II)-H₂O] complex prior to the substitution of the aqua ligand. The values of the activation parameters indicate that the substitution of the aqua ligand by pyridine, 2-picoline and 4-picoline follow an associative mechanism.     

Electronic structure of oxidized complexes derived from cis-[Ru(II)(bpy)2(H2O)2]2+ and its photoisomerization mechanism

The geometry and electronic structure of cis-[Ru(II)(bpy)(2)(H(2)O)(2)](2+) and its higher oxidation state species up formally to Ru(VI) have been studied by means of UV-vis, EPR, XAS, and DFT and CASSCF/CASPT2 calculations. DFT calculations of the molecular structures of these species show that, as the oxidation state increases, the Ru-O bond distance decreases, indicating increased degrees of Ru-O multiple bonding. In addition, the O-Ru-O valence bond angle increases as the oxidation state increases. EPR spectroscopy and quantum chemical calculations indicate that low-spin configurations are favored for all oxidation states. Thus, cis-[Ru(IV)(bpy)(2)(OH)(2)](2+) (d(4)) has a singlet ground state and is EPR-silent at low temperatures, while cis-[Ru(V)(bpy)(2)(O)(OH)](2+) (d(3)) has a doublet ground state. XAS spectroscopy of higher oxidation state species and DFT calculations further illuminate the electronic structures of these complexes, particularly with respect to the covalent character of the O-Ru-O fragment. In addition, the photochemical isomerization of cis-[Ru(II)(bpy)(2)(H(2)O)(2)](2+) to its trans-[Ru(II)(bpy)(2)(H(2)O)(2)](2+) isomer has been fully characterized through quantum chemical calculations. The excited-state process is predicted to involve decoordination of one aqua ligand, which leads to a coordinatively unsaturated complex that undergoes structural rearrangement followed by recoordination of water to yield the trans isomer.     

Stability of [Ru(II)(tpy)(bpy)(OH(2))](2+)-modified graphite electrodes during indirect electrolyses

The stability of a graphite felt electrode modified by covalent attachment of [Ru(II)(tpy)(bpy)(OH(2))](2+) is investigated during the indirect electrolyses of alcohols in a flow cell. The continuous increase of the local potential of the electrode during the electrolyses attests to its degradation. Cyclic voltammetry analyses of the modified electrode after electrolyses show a total decrease of 80-90% of the wave corresponding to the Ru(III/II) couple. The concentration of remaining alcohol measured at the outlet of the cell is almost constant during all the electrolyses but increase when the potential exceeds 0.95 V(SCE). At low potentials, the electrode can be regenerated by reaction with Ru(II)Cl(2)(DMSO)(tpy) and then CF(3)SO(3)H, followed by hydrolysis, showing that the bipyridine ligand remains covalently attached to the electrode. At high potentials, the graphite is oxidized and the catalyst is partly lost in the reaction medium. XPS analyses of Ru core levels reveal that the ruthenium disappeared after electrolysis, showing that the degradation of the modified electrode is due to the demetalation of the oxidized complex.