Anionic microemulsion-mediated low temperature synthesis of anisotropic silicalite-1 nanocrystals

The low-temperature (368 K) synthesis of silicalite-1 nanocrystals in anionic microemulsions is reported. In the presence of AOT/isooctane mixtures silicalite-1 nanocrystals can be formed that are coffin-shaped and approximately 100 x 40 x 200 nm in size. This is in contrast to samples made without the microemulsion under the same conditions where irregular spherical particles approximately 100 nm in diameter are formed. The current work shows that, in contrast to previous work in this area, the anionic microemulsions cannot stabilize colloidal silica due to the strong repulsive electrostatic forces between the anionic silicate species and the surfactant headgroup. The crystal morphology of the silicalite-1 obtained is also shown to be sensitive to the surfactant identity as syntheses using SDS/heptane/butanol mixtures lead to different morphologies. It is also possible to uncouple zeolite nucleation from growth in these systems. This was demonstrated by adding a solution containing 25 nm silicalite-1 nanocrystals to the AOT/isooctane mixture, which leads to large micron-sized spheres of silicalite-1 containing large mesopores. This report demonstrates that anionic microemulsions lead to fundamentally different crystal habits than the nonionic or cationic microemulsions investigated previously. The future outlook for the use of microemulsion-mediated zeolite growth is also discussed.     

Morphological control and luminescent properties of YVO4:Eu nanocrystals

Rodlike, olivelike, pineapplelike, and particlelike nanocrystals of theYVO4:Eu (5 at. % Eu) were synthesized by a hydrothermal reaction with different conditions, respectively. The rodlike nanocrystal has a rectangular cross-section with about 35 x 60 nm2 and a length of about 220 nm. The olivelike nanocrystal has an equatorial diameter of approximately 40 nm and a length of approximately 200 nm. The pineapplelike nanocrystal with an equatorial diameter of approximately 200 nm and a length of approximately 300 nm, is a superstructure consisting of self-organized nanorods with a diameter of approximately 20 nm and a length of approximately 50 nm. The particlelike nanocrystals show globular and polyhedral shape with a diameter of approximately 50 nm. Their UV-vis absorption peaks are at 305, 308, 285, and 280 nm, respectively, and there is such a trend that the absorption peaks shift to higher energy as the size of the particles decreases. Compared with other-shape nanocrystals, the luminescence intensity of the olivelike nanocrystals is obviously enhanced. It suggests that we could obtain the function-improved materials by tailoring the size and shape of theYVO4:Eu nanostructures.     

The influence of calcination on the size of nanocrystals, porous structure and acid–base properties of mesoporous anatase used as catalytic support

Mesoporous anatase was prepared following sol–gel and using urea as template. The influence of calcination temperature on the phase stability, nanocrystal/aggregate size, pore size distribution and specific surface area as well as on the acid–base behavior in aqueous solutions was studied using X-ray diffraction, laser-Raman and diffuse reflectance spectroscopies, scanning electron microscopy and laser scattering as well as N₂ adsorption–desorption isotherms and potentiometric mass titrations.The crystal structure was kept constant upon calcination over the whole temperature range, 200–500 °C. In this range anatase is constituted from primary nanocrystals. These are assembled into larger, rather spherical, clusters of about 30–40 nm and then into aggregates of various sizes (0.2–0.3 μm and 2–100 μm) with a distribution centered at about 12 μm. Increase of the calcination temperature caused an increase in the size of the primary nanocrystals from 8.1 nm at 200 °C to 17.1 nm at 500 °C, whereas calcination does not influence the morphology at micro-scale. Moreover, increase of the calcination temperature from 200 °C to 500 °C brings about a shift in the mean pore diameter from 47 nm to 91 nm accompanied by a decrease in the specific surface area and pore volume. The above effects were related with the aforementioned increase in the size of the primary nanocrystals. The value of pzc and the values of surface charge determined at various pH do not practically depend on the calcination temperature. The absence of pore space confinement effects was explained in terms of the structure and size of the interface development between the anatase surface and the electrolytic solution.     

Size-Controlled Synthesis of Nano-Zeolites and Their Application to Light Olefin Synthesis

For the application of zeolites as heterogeneous catalysts, low diffusion resistance for hydrocarbons within the micropore is essential for improving product selectivity and catalyst lifetime. This problem has been overcome by reducing the crystal size. This review introduces size-controlled preparation of nano-sized zeolites via hydrothermal synthesis in water/surfactant/organic solvent (emulsion method) and their application to heterogeneous catalysts. The ionicity of the hydrophilic group in surfactant molecules and the concentration of the Si source affected the crystallinity and morphology of zeolites prepared using the emulsion method. When using a non-ionic surfactant, mono-dispersed silicalite-1 nanocrystals ~60?nm in diameter were successfully prepared. Nano- and macro-ZSM-5 zeolites with crystal sizes of ~150?C200?nm and 1.5???m, respectively, were prepared and applied to n-hexane cracking and acetone-to-olefin reactions to investigate the effect of zeolite crystal size on catalytic stability and light olefin yield. Application of nano-zeolite to light olefin production was effective in achieving faster mass transfer of hydrocarbon molecules within the micropore, which led to improvements in olefin yields and catalyst lifetime.     

Hierarchically structured monolithic silicalite-1 consisting of crystallized nanoparticles and its performance in the Beckmann rearrangement of cyclohexanone oxime

In this study, we present a synthetic pathway for the fabrication of self-supporting zeolite monoliths consisting of crystallized nanoparticles. A resorcinol-formaldehyde-based organic aerogel is used as a template, and silicalite-1 is used as the zeolite example. The silicalite-1 monoliths obtained consist of individual well-defined zeolite nanocrystals with sizes of 30-40 nm. The monoliths exhibit a high mechanical stability and have hierarchical porosity, with micropores within the zeolite particles, a mesopore system formed by the packing of the nanoparticles, and a macropore system on the monolith level. Such monolithic zeolites show high selectivity typically above 80% to epsilon-caprolactam combined with a high rate of reaction of 0.46 g(caprolactame)/(g(catalyst).h) in the Beckmann rearrangement of cyclohexanone oxime.     

Ligand-passivated Eu:Y2O3 nanocrystals as a phosphor for white light emitting diodes

Eu(III)-doped Y(2)O(3) nanocrystals are prepared by microwave synthetic methods as spherical 6.4 ± 1.5 nm nanocrystals with a cubic crystal structure. The surface of the nanocrystal is passivated by acetylacetonate (acac) and HDA on the Y exposed facet of the nanocrystal. The presence of acac on the nanocrystal surface gives rise to a strong S(0) → S(1) (π → π*, acac) and acac → Ln(3+) ligand to metal charge transfer (LMCT) transitions at 270 and 370 nm, respectively, in the Eu:Y(2)O(3) nanocrystal. Excitation into the S(0) → S(1) (π → π*) or acac → Ln(3+) LMCT transition leads to the production of white light emission arising from efficient intramolecular energy transfer to the Y(2)O(3) oxygen vacancies and the Eu(III) Judd-Ofelt f-f transitions. The acac passivant is thermally stable below 400 °C, and its presence is evidenced by UV-vis absorption, FT-IR, and NMR measurements. The presence of the low-lying acac levels allows UV LED pumping of the solid phosphor, leading to high quantum efficiency (～19%) when pumped at 370 nm, high-quality white light color rendering (CIE coordinates 0.33 and 0.35), a high scotopic-to-photopic ratio (S/P = 2.21), and thermal stability. In a LED lighting package luminosities of 100 lm W(-1) were obtained, which are competitive with current commercial lighting technology. The use of the passivant to funnel energy to the lanthanide emitter via a molecular antenna effect represents a new paradigm for designing phosphors for LED-pumped white light.     

Synthesis and application of colloidal nanocrystals of the MFI-type zeolites

The colloidal dispersion containing the nanosized zeolites with the MFI topology has been successfully prepared. A pre-aging process of the mother gel at 80°C for 24 h before the crystallization was important for the formation of the nanosized zeolites. We have also found that silicalite-1 nanocrystals av. 62 nm in size were formed by the addition of acidic amino acids into the mother gel. The particle size of the zeolites can be controlled ranging from 62 to 530 nm by changing the amount of water, aging process, crystallization time and temperature and the addition of organic molecules. Furthermore, nanosized titanium silicalite-1 (TS-1) with the size of 50-130 nm has been successfully synthesized by the addition of a Ti source into the synthesis gel of the silicalite-1 nanocrystals. The nanosized TS-1 exhibits a higher catalytic activity in the epoxidation of cyclohexene than the microsized ones. Finally, we demonstrate the preparation of thin films of the silicalite-1 and TS-1 nanocrystals onto a silicon substrate by a dip-coating technique.     

Preparation of Organic Nanoparticle Colloids by Laser Ablation and Their Nonlinear Optical Properties

Suspension of micrometer-sized 1,4-bis(4-methylstyryl)benzene(p-MSB) was converted into colloidal nanocrystal solution by irradiation with an femtosecond laser(800 nm, 1 kHz). The prepared nanocrystals were rectangular with ca. 100 nm in size. The same crystal structure as that of bulk crystals was confirmed by X-ray diffraction measurement. UV-Vis spectra and emission spectra of the nanoparticle dispersions in dichloromethane(poor solvent) were examined. The nanocrystal exhibits large quantum yield(89%). The nonlinear optical properties of the nanocrystals were further studied by Z-scan technique with femtosecond laser duration of 120 fs at a wavelength of 800 nm. The results show that the nanocrystals exhibit strong nonlinear absorption.     

Self-assembly of PbTe quantum dots into nanocrystal superlattices and glassy films

Monodisperse lead telluride (PbTe) nanocrystals ranging from approximately 4 to 10 nm in diameter are synthesized to provide quantum dot building blocks for the design of novel materials for electronic applications. Two complementary synthetic approaches are developed that enable either (1) isolation of small quantities of nanocrystals of many different sizes or (2) the production of up to 10 g of a single nanocrystal size. PbTe nanocrystals are characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), and optical absorption. Assembly of PbTe nanocrystals is directed to prepare nanocrystal solids that display either short-range (glassy solids) or long-range (superlattices) packing order by varying deposition conditions. Film order and average interparticle spacing are analyzed with grazing-incidence small-angle X-ray scattering (GISAXS) and high-resolution scanning electron microscopy (HRSEM). We perform the first optical and electronic studies of PbTe solids and demonstrate that chemical activation of these films enhances conductivity by approximately 9-10 orders of magnitude while preserving their quantum dot nature.     

Solvothermal synthesis of zincblende and wurtzite CuInS2 nanocrystals and their photovoltaic application

We report a simple solvothermal synthesis approach to the growth of CuInS(2) nanocrystals with zincblende- and wurtzite-phase structures. Zincblende nanocrystals with particle sizes of 10-20 nm were produced using oleylamine as the solvent. When ethylenediamine was used as the solvent, similarly sized wurtzite nanocrystals with some degree of particle aggregation were formed. Use of a mixture of these solvents gave products with mixed phases including some polyhedral nanostructures. The crystal phases of these nanocrystals were carefully determined by X-ray diffraction and transmission electron microscopy analysis. All the samples exhibit strong absorption from the entire visible light region to the near-infrared region beyond 1300 nm. Pure-phase zincblende and wurtzite CuInS(2) nanocrystals were employed as ink in the fabrication of solar cells. The spray-coated nanocrystal layer was subjected to a selenization process. A power conversion efficiency of ~0.74% and a good external quantum efficiency profile over broad wavelengths have been measured. The results demonstrate that wurtzite and zincblende CuInS(2) nanocrystals may be attractive precursors to light-absorbing materials for making efficient photovoltaic devices.     

Tubular-shaped stoichiometric chrysotile nanocrystals

Stoichiometric chrysotile tubular nanocrystals have been synthesized as possible starting materials for applications toward nanotechnology, and as a standard reference sample for the investigation of the molecular interactions between chrysotile, the most utilized asbestos, and biological systems. Chrysotile nanocrystals have been synthesized under controlled hydrothermal conditions, and have been characterized by chemical, morphological, structural, spectroscopic and microcalorimetric analyses. They show a constant "cylinder-in-cylinder" morphology constituted by two or three concentric subunits. Each single nanocrystal has a tubular shape of about 49+/-1 nm in outer maximum diameter, and a hollow core of about 7+/-1 nm. Structural investigation carried out on an X-ray powder pattern allowed to improve the structural model proposed for chrysotile mineral samples. Synthetic chrysotile crystallizes in the monoclinic Cc space group with a=0.5340(1) nm, b=0.9241(1) nm, and c=1.4689(2) nm, beta=93.66(3) degrees.     

Dynamic nuclear polarization of amyloidogenic peptide nanocrystals: GNNQQNY, a core segment of the yeast prion protein Sup35p

Dynamic nuclear polarization (DNP) permits a approximately 10(2)-10(3) enhancement of the nuclear spin polarization and therefore increases sensitivity in nuclear magnetic resonance (NMR) experiments. Here, we demonstrate the efficient transfer of DNP-enhanced (1)H polarization from an aqueous, radical-containing solvent matrix into peptide crystals via (1)H-(1)H spin diffusion across the matrix-crystal interface. The samples consist of nanocrystals of the amyloid-forming peptide GNNQQNY(7-13), derived from the yeast prion protein Sup35p, dispersed in a glycerol-water matrix containing a biradical polarizing agent, TOTAPOL. These crystals have an average width of 100-200 nm, and their known crystal structure suggests that the size of the biradical precludes its penetration into the crystal lattice; therefore, intimate contact of the molecules in the nanocrystal core with the polarizing agent is unlikely. This is supported by the observed differences between the time-dependent growth of the enhanced polarization in the solvent versus the nanocrystals. Nevertheless, DNP-enhanced magic-angle spinning (MAS) spectra recorded at 5 T and 90 K exhibit an average signal enhancement epsilon approximately 120. This is slightly lower than the DNP enhancement of the solvent mixture surrounding the crystals (epsilon approximately 160), and we show that it is consistent with spin diffusion across the solvent-matrix interface. In particular, we correlate the expected DNP enhancement to several properties of the sample, such as crystal size, the nuclear T(1), and the average (1)H-(1)H spin diffusion constant. The enhanced (1)H polarization was subsequently transferred to (13)C and (15)N via cross-polarization, and allowed rapid acquisition of two-dimensional (13)C-(13)C correlation data.     

Faceting of nanocrystals during chemical transformation: from solid silver spheres to hollow gold octahedra

We demonstrate that performing a replacement reaction on single crystalline Ag nanospheres of approximately 10 nm in diameter in an organic solvent produces hollow Au nanocrystals with an octahedral shape. Different from those Au shells made by starting with Ag particles about 1 order of magnitude larger, which largely reproduce that of the sacrificial Ag counterparts, the hollow nanocrystals obtained in this work show significant changes in the external morphology from the spherical Ag precursors. This evolution of a faceted external morphology during chemical transformation is made possible by the enhanced role of surface effects in our smaller nanocrystals. The competition between the Au atom deposition and Ag atom dissolution on various nanocrystal surfaces is believed to determine the final octahedral shape of the hollow Au nanocrystals. Simultaneous achievement of surface-mediated shape control and a hollow morphology in a one-pot, single-step synthetic procedure in this study promises an avenue to finer tuning of particle morphology, and thus physical properties such as surface plasmon resonance.     

Surface modification of cotton nanocrystals with a silane agent

The research herewith aims at obtaining cellulose nanocrystals with a reduced hydrophilic surface character using a silane with isocyanate groups (isocyanatepropyltriethoxysilane), which are very reactive to hydroxyl groups and thus, are readily able to react with the low quantity of free hydroxyl groups present in the cellulose nanocrystal surfaces, therefore, promoting surface modification. Cellulose nanocrystals were obtained by hydrochloric acid hydrolysis of cotton fiber and were characterized by X-ray diffraction, Fourier transform infrared spectroscopy (FTIR) and solid state ²⁹Si nuclear magnetic resonance (NMR) and their morphologies were investigated by scanning and transmission electron microscopy techniques. The nanocrystals presented a needle-like geometry with a 10 nm approximate diameter and a 166 nm average length. FTIR, ²⁹Si NMR and silicon mapping images showed that nanocrystal surface chemical modification was successfully achieved. Also, the results confirm that the chemical modification occurred mainly at the nanocrystal surface, keeping the morphological integrity of the nanocrystals. The applied methodology for surface modification of the cellulose nanocrystals provided nanofillers with more appropriate surface characteristics that allow the dispersion in polymeric matrices and the adhesion at filler-matrix interface to be obtained. This may result in a better performance of these nanocrystals as reinforcing agents of hydrophobic polymer matrices.     

微米级MEL分子筛聚集体的制备

使用四丁基氢氧化铵-正硅酸四乙酯-水（TBAOH-TEOS-H₂O）简单体系一步水热制备了具有多级孔道的微米级MEL结构分子筛聚集体. 得到的silicalite-2 微米球直径大于10 μm且具有高达460 m²·g^-1的比表面积和0.74 cm³·g^-1的孔体积. 微米球的生成一定程度上解决了催化应用过程中催化剂的分离和回收问题. 同时,水热晶化过程中由纳米粒子自组装而成的晶间介孔缩短了反应物分子的扩散路径,保持了分子筛纳米晶粒的优势. 此外,钛活性位的引入并未明显影响MEL微米球的形貌和结构,含钛的MEL微米球TS（钛硅分子筛）-2在苯酚羟基化反应中具有与纳米尺寸TS-1（100-200 nm）相当的催化活性,且TS-2 可以通过简单过滤得到,简化了纳米级TS-1的分离和回收过程.     

Synthesis of organic monolayer-stabilized copper nanocrystals in supercritical water

When water is heated and pressurized above the critical point, it becomes a suitable solvent to employ organic capping ligands to control and stabilize the synthesis of nanocrystals. Without alkanethiol ligands, Cu(NO(3))(2) hydrolyzes to form polydisperse copper(II) oxide particles with diameters from 10 to 35 nm. However, in the presence of 1-hexanethiol, X-ray photoelectron spectroscopy, selected area electron diffraction, and transmission electron microscopy reveal the formation of copper nanocrystals approximately 7 nm in diameter. The use of a different precursor, Cu(CH(3)COO)(2), leads to particles with significantly different morphologies. A mechanism is proposed for sterically stabilized nanocrystal growth in supercritical water that describes competing pathways of hydrolysis to large oxidized copper particles versus ligand exchange and arrested growth by thiols to produce small monodisperse Cu nanoparticles.     

Ferromagnetism in colloidal Mn2+ -doped ZnO nanocrystals

High-temperature hydrolysis of Zn(II) and Mn(II) alkoxides in a high boiling point solvent in the presence of surfactants was used to prepare surfactant-coated Zn(1-x)Mn(x)O nanocrystals with average size of 5.5 nm and x = 0.04 +/- 0.03. The magnetic properties of the nanocrystals were measured both for isolated particles diluted in a hydrocarbon matrix and for a nanocrystal powder. Nanocrystals of manganese oxide and ZnO coated with manganese oxide were prepared for comparison to the Zn(1-x)Mn(x)O nanocrystals. We find that the manganese ions primarily substitute zinc ions in the hexagonal ZnO lattice, and part of them are ferromagnetically coupled up to room temperature even in isolated noninteracting nanocrystals. The rest of the ions are magnetically disordered or uncoupled. Surprisingly, these small Zn(1-x)Mn(x)O nanocrystals poses relatively large low-temperature magnetic coercivity and relatively high blocking temperature in the isolated form, which indicate large magnetic anisotropy. In the nanocrystal powder the coercive field decreased significantly. This study highlights the advantages of working with noninteracting single domain particles of these intriguing materials.     

Super crystal structures of octahedral c-In2O3 nanocrystals

The three-dimensional self-assembly of a nanocrystal superlattice, i.e., a super crystal, has attracted increasing attention. The small building blocks for assemblies are usually spherical nanocrystals. Recent progress indicates that it is possible to achieve a super crystal using cubic nanocrystals. We further analyze and describe two-dimensional and some three-dimensional assemblies of uniform cubic-phase In2O3 nanocrystals with an octahedral shape. In this article, we demonstrate our amazing observations on these kinds of super crystals (or superlattices) as a model system, report their scale in at least tens of microns, and show other interesting features such as steps, terraces, kinks, and vacancies which are similar to those from a single crystal. Based on electron microscopy observations, three types of well-defined octahedral nanocrystal packed structures in such super crystal systems are also identified. The investigation of octahedral super crystal systems provides an alternate direction in research that may extend the interest of superlattice study to a broad spectrum by enriching and varying the shape of elemental building blocks. This may potentially result in new concepts and more challenging applications such as soft X-ray photonics.     

Preparation and application of L-cysteine-modified CdSe/CdS core/shell nanocrystals as a novel fluorescence probe for detection of nucleic acid

The water-soluble L-cysteine-modified CdSe/CdS core/shell nanocrystals (expressed as CdSe/CdS/Cys nanocrystals) have been synthesized in aqueous by using L-cysteine as stabilizer. The size, shape, component and spectral property of CdSe/CdS/Cys nanocrystals were characterized by high-resolution transmission electron microscope (HRTEM), energy dispersive X-ray fluorescence (EDX), infrared spectrum (IR) and photoluminescence (PL). The results showed that the spherical CdSe/CdS/Cys nanocrystals with an average diameter of 2.3 nm have favorable fluorescent property, theirs photostability and fluorescence intensity are enhanced greatly after overcoating with CdS. The cysteine modified on the surface of core/shell CdSe/CdS nanocrystals renders the nanocrystals water-soluble and biocompatible. Based on the fluorescence quenching of the nanocrystals in the presence of calf thymus deoxyribonucleic acid (ct-DNA), a fluorescence quenching method has been developed for the determination of ct-DNA by using the nanocrystals as a novel fluorescence probe. The pH value of the system was selected at pH 7.4, with excitation and emission wavelength at 380 and 522 nm, respectively. Under the optimal conditions, the fluorescence quenching intensity of the system is linear with the concentration of ct-DNA in the range of 0.1-3.5 microg/mL (r=0.9987). The detection limit is 0.06 microg/mL. And two synthetic samples were analyzed satisfactorily.