液相色谱梯度洗脱中的谱带压缩效应

谱带压缩效应是梯度洗脱区别于等度洗脱的重要特征。经典的范德姆特(van Deemter)理论塔板高度方程基于等度洗脱推导得到,因此不能对谱带压缩效应进行描述。在梯度洗脱中,保留因子(k)会随流动相组成(φ)的改变而发生变化,这就使得对梯度洗脱机理的研究要比等度洗脱复杂许多。该文对近10年来谱带压缩效应的研究进展,特别是溶剂强度模型(即描述ln k与φ关系的数学表达式)的非线性特征对谱带压缩因子(G)的影响进行了述评,指出为了更好地认识谱带压缩效应需要将这种非线性因素考虑在内。     

Separation and determination of metals as complexes of 1-nitroso-2-naphthol-6-suiphonic and 2-nitroso-1-naphthol-6-sulphonic acids. II. Liquid chromatography on c18 bonded and copolymer stationary phases

An ion-pair Chromatographic system for the separation of copper(II), palladium(II), iron(III) and cobalt(III) as ion-associates of their l-nitroso-2-naphthol-6-sulphonate and 2-nitroso-l-naphthol-6-sulphonate anionic complexes with organic ammonium compounds and inorganic cations has been studied. Isocratic and gradient elution methods were used, and the effects of column material, organic and aqueous modifiers, and pH of the eluent on the retention were examined. The elution time for the metal complex anions depends on the eluent, the proportion of organic solvent in the mobile phase, the pH of the eluent and the extraction coefficient of the compounds. The compounds were identified photometrically with a diode-array detector at wavelengths of 229, 254, 260, 298, 320 and 400 nm. The detection limits for the metals are at the ng/ml level.     

Quantitative Determination of Digitalis Glycosides in Digitalis Purpurea Leaves by Reversed-Phase Thin-Layer Chromatography

Abstract

A densitometric reversed-phase thin-layer chromatographic(RP-TLC) method for the determination of digitalis glycosides in Digitalis purpurea leaves has been developed. The procedure involves extraction of dry leaf powder with ethanol/chloroform (2:1) and clean-up by Sep-Pak cartridges prior to RP-TLC analysis. RP-TLC was performed on an octadecylsilyl bonded silica gel plate, using a developing solvent of acetonitrile/0.5 M NaCl(1 : 1) for secondary glycosides and acetonitrile/0.5 M NaCl(2 : 3)for primary glycosides. The plate was scanned with a reflectance densitometer at 222 nm. Quantitation of these glycosides was carried out by the internal standard method. The amounts of digitoxin, gitoxin, gitaloxin, purpurea glycoside A, purpurea glycoside B, and glucogitaloxin in a leaf powder sample of Digitalis purpurea were estimated from the calibration graphs for pure glycosides.     

Sensitivity enhancement in capillary electrochromatography by on-column preconcentration

Summary The potential of on-column preconcentration in capillary electrochromatography (CEC) to improve the detection limit was investigated. Two test mixtures containing a pharmaceutically relevant steroid (Desogestrel or Tibolon) together with several structurally related compounds were used for evaluation. For both test mixtures, the mobile phase composition was optimised resulting in a baseline separation of all components and plate numbers of up to 1.2·10⁵ plates m⁻¹ within 15 min. An equation was derived which describes the obtainable gain in injection time as function of the analyte retention factor in the mobile phase and in the injection solvent. The proposed model accounts for the focussing of the analytes due to both the retention during injection and the step-gradient during elution. For the experimental study, the least hydrophobic component of the Desogestrel mixture was used. When the mobile phase was used as injection solvent, a considerable decrease in plate number was observed when the injection time exceeded 5 s. By dissolving the analyte in a less-eluting solvent, injection times could be increased up to 60 s without causing significant extra band broadening. Two mixtures containing a relatively high amount of Desogestrel or Tibolon, and the related components at the 0.1% level were analysed to study the potential of the system for impurity profiling. With the mobile phase as injection solvent, the low level components could hardly be detected. By applying large volume injection from a less-eluting injection solvent, a gain in sensitivity of a factor of 7–9 was achieved.     

Molecularly imprinted polymers for the selective solid-phase extraction of chloramphenicol

A variety of bulk polymers for the selective separation of chloramphenicol were synthesised from 2-vinylpyridine, diethylaminoethyl methacrylate or methacrylic acid monomers. Chromatographic evaluation indicated that chloramphenicol was retained under nonpolar elution conditions (k = 58.65) through selective hydrogen bonding and ionic interactions. The retention of chloramphenicol under aqueous elution conditions (k > 100) results from nonselective hydrophobic interactions. Under nonpolar elution conditions, the functional monomer employed imparted a significant influence on the recognition properties of the corresponding polymer. After solid-phase extraction using a molecularly imprinted polymer as sorbent and either an organic or aqueous washing solvent, nearly 100% recovery from the chloramphenicol standard solution was achieved, and nearly 90% recovery could be attained from spiked honey samples. The molecularly imprinted polymer was well suited to suppress matrix effects, and provided optimal preconcentration of the target molecule (chloramphenicol) prior to chromatographic analysis.     

Analysis of linear and cyclic oligomers in polyamide-6 without sample preparation by liquid chromatography using the sandwich injection method. III. Separation mechanism and gradient optimization

The first six linear and cyclic oligomers of polyamide-6 can be quantitatively determined in the polymer using HPLC with the sandwich injection method and an aqueous acetonitrile gradient. In this final part of the triptych concerning the determination of the oligomers in polyamide-6, the irregular elution behavior of the cyclic monomer compared to the cyclic oligomers was investigated. We also optimized the separation of the involved polyamide oligomers, with respect to gradient steepness, stationary phase, column temperature and mobile phase pH. The irregular elution behavior of the cyclic monomer could be caused by its relatively large exposed/accessible hydrophobic surface, which permits relatively easy penetration into the hydrophobic stationary phase giving extra retention. The dipole moment of the different oligomers was used as a measure for this exposed/accessible hydrophobic area to correlate the retention factors using quantitative structure-retention relationships. We also studied the retention behavior of the polyamide, which is injected each run directly onto the column and modifies the stationary phase. Using a 250-microl post gradient injection zone of formic acid on a 250x3 mm Zorbax SB-C18 column, the polyamide could be effectively removed from the stationary phase after each separation. The linear solvent strength (LSS) model was used to optimize the separation of the first six linear and cyclic oligomers. As the LSS model assumes a linear correlation between the modifier concentration and the logarithm of the retention factor and the cyclic monomer and dimer show extreme curvation of this relation in the eluting region, we investigated different models to predict gradient elution from isocratic data. A direct translation of the isocratic data to gradient retention times did not yield adequate retention times using the LSS model. It was found that the LSS model worked acceptably if gradient retention times were used as input data. Even for fast non-linearly eluting components, an average error of 0.4 resolution units of 4sigma was obtained. Using the LSS model in combination with different column temperatures and mobile phase pH values, a separation of the first six linear and cyclic oligomers was accomplished.     

Comparison of retention models for polymers 1. Poly(ethylene glycol)s

The suitability of three different retention models to predict the retention times of poly(ethylene glycol)s (PEGs) in gradient and isocratic chromatography was investigated. The models investigated were the linear (LSSM) and the quadratic solvent strength model (QSSM). In addition, a model describing the retention behaviour of polymers was extended to account for gradient elution (PM). It was found that all models are suited to properly predict gradient retention volumes provided the extraction of the analyte specific parameters is performed from gradient experiments as well. The LSSM and QSSM on principle cannot describe retention behaviour under critical or SEC conditions. Since the PM is designed to cover all three modes of polymer chromatography, it is therefore superior to the other models. However, the determination of the analyte specific parameters, which are needed to calibrate the retention behaviour, strongly depend on the suitable selection of initial experiments. A useful strategy for a purposeful selection of these calibration experiments is proposed.     

Separation and quantitation of colour pigments of chili powder (Capsicum frutescens) by high-performance liquid chromatography-diode array detection

The performance of reversed-phase thin-layer (RP-TLC) and reversed-phase high-performance liquid chromatography (RP-HPLC) was compared for the separation and determination of the colour pigments of chili (Capsicum frutescens) powder using a wide variety of eluent systems. No separation of pigments was achieved in RP-TLC, however, it was established that tetrahydrofuran shows an unusually high solvent strength. RP-HPLC using water-methanol-acetonitrile gradient elution separated the chili pigments in many fractions. Diode array detection (DAD) indicated that yellow pigments are eluted earlier than the red ones and chili powder contains more yellow pigments than common paprika powders. It was established that the very different absorption spectra of pigments make the use of DAD necessary.     

Development of an ion chromatographic gradient retention model from isocratic elution experiments

When facing separation problems in ion chromatography, chromatographers often lack guidelines to decide a priori if isocratic elution will give enough separation in a reasonable analysis time or a gradient elution will be required. This situation may be solved by the prediction of retention in gradient elution mode by using isocratic experimental data. This work describes the development of an ion chromatographic gradient elution retention model for fluoride, chloride, nitrite, bromide, nitrate, sulfate and phosphate by using isocratic experimental data. The isocratic elution retention model was developed by applying a polynomial relation between the logarithm of the retention factor and logarithm of the concentration of competing ions; the gradient elution retention model was based on the stepwise numerical integration of the corresponding differential equation. It was shown that the developed gradient elution retention model was not significantly affected by transferring data form isocratic experiment. The root mean squared prediction error for gradient elution retention model was between 0.0863 for fluoride and 0.7027 for bromide proving a very good predictive ability of developed gradient elution retention model.     

Retention prediction of a set of amino acids under gradient elution conditions in hydrophilic interaction liquid chromatography

The analysis of amino acids presents significant challenges to contemporary analytical separations. The present paper investigates the possibility of retention prediction in hydrophilic interaction chromatography (HILIC) gradient elution based on the analytical solution of the fundamental equation of the multilinear gradient elution derived for reversed‐phase systems. A simple linear dependence of the logarithm of the solute retention (ln k) upon the volume fraction of organic modifier (φ) in a binary aqueous‐organic mobile is adopted. Utility of the developed methodology was tested on the separation of a mixture of 21 amino acids carried out with 14 different gradient elution programs (from simple linear to multilinear and curved shaped) using ternary eluents in which a mixture of methanol and water (1:1, v/v) was the strong eluting member and acetonitrile was the weak solvent. Starting from at least two gradient runs, the prediction of solute retention obtained under all the rest gradients was excellent, even when curved gradient profiles were used. Development of such methodologies can be of great interest for a wide range of applications.     

Evaluation of lithium separation by dispersive liquid–liquid microextraction using benzo-15-crown-5

In this article a dispersive liquid?Cliquid microextraction method was applied for evaluation of lithium separation from aqueous solution. Benzo-15-crown-5 (B15C5) was used as a chelating agent prior to extraction. An appropriate mixture of disperser solvent and extraction solvent were added rapidly into the aqueous sample containing lithium ion; as a result, a cloudy solution was formed which consisted of fine droplets of extraction solvent dispersed entirely into aqueous phase. The mixture was centrifuged and the lithium complex with B15C5 was sedimented at the bottom of the conical sample holder. Then, 2.0?mL of enriched phase containing lithium complex was used for determination of lithium ion by flame atomic absorption spectrometry. The conditions for the microextraction performance were investigated. Under the best optimized conditions, the accepted recovery factors for the lithium obtained, ranged from 37.24 to 99.63?%. Furthermore, high preconcentration factors (7.46?C19.93) were also achieved. The relative standard deviation for three replicate measurements of 0.127?mg?L^?1 of lithium was 2.83?%.     

The determination of the plate count for large molecules under reversed-phase gradient conditions

The true performance of HPLC columns in the gradient separation of macromolecules can be assessed by measuring the true plate count, if we know the retention factor of the analyte at the point of elution. We are demonstrating in this short communication how this can accomplished in a straightforward fashion. The procedure used here is a significant simplification over previous approaches, and enables the chromatographer to do so without complex algebra or additional experiments.     

Determination of the urinary metabolites of caffeine and theophylline by high-performance liquid chromatography. A comparative study of a direct injection and an ion-pair extraction procedure

Chromatographic separation of methylxanthine metabolites was achieved using a Hypersil octadecylsilane column with a simple concave gradient elution programme of 0-12.75% acetonitrile in 1% tetrahydrofuran, pH 4.8, and the eluted components were detected by monitoring their absorption at 280 nm. An extraction procedure involving the formation of an ion-pair complex was developed which gave significant improvements over previously described methods including a shorter chromatographic run of 20 min. A thorough comparison of this procedure with a more convenient alternative involving direct injection of diluted urine specimens showed that the latter analysis was adequate for the quantitation of the major urinary metabolites of caffeine and theophylline.     

Non-aqueous size-exclusion chromatography coupled on-line to reversed-phase high-performance liquid chromatography. Interface development and applications to the analysis of low-molecular-weight contaminants and additives in foods

An interface has been developed which permits the on-line coupling of size-exclusion chromatography in tetrahydrofuran with aqueous reversed-phase high-performance liquid chromatography. The interface isolates the required size exclusion chromatography fraction and dilutes it with water to ensure reconcentration of analytes on the reversed-phase column prior to gradient elution. Operational parameters and the influence of analyte polarity have been examined in detail. A predictive system is presented for determining the applicability of the system to any analyte, based on solute retention times on an ODS phase eluted with a methanol-water gradient. The method is illustrated with examples of direct analyses of crude lipid extracts from a snack product for 2,6-di-tert.-4-methylphenol and from chocolate for dibutyl phthalate. Detection limits of ca. 0.5 mg/kg have been achieved.     

Some insights on the description of gradient elution in reversed‐phase liquid chromatography

The so‐called “fundamental equation for gradient elution” has been used for modeling the retention in gradient elution. In this approach, the instantaneous retention factor (k) is expressed as a function of the change in the modifier content (φ(t_s)), t_s being the time the solute has spent in the stationary phase. This approach can only be applied at constant flow rate and with gradients where the elution strength depends on the column length following a f(t?l/u) function, u being the linear mobile phase flow rate, and l the distance from the column inlet to the location where the solute is at time t measured from the beginning of the gradient. These limitations can be solved by using the here called “general equation for gradient elution”, where k is expressed as a function of φ(t,l). However, this approach is more complex. In this work, a method that facilitates the integration of the “general equation” is described, which allows an approximate analytical solution with the quadratic retention model, improving the predictions offered by the “linear solvent strength model.” It also offers direct information about the changes in the instantaneous modifier content and retention factor, and gives a meaning to the gradient retention factor.     

Sensitive measurement of vinorelbine in dog plasma by liquid chromatography–electrospray ionization tandem mass spectrometry utilizing transitions from double‐charged precursor ions

A sensitive high‐performance liquid chromatography/tandem mass spectrometry (LC/MS/MS) method for measuring vinorelbine was developed. A 100 µL aliquot of plasma was spiked with deuterium‐labeled internal standard and subjected to solid‐phase extraction using an Oasis HLB μ‐elution plate. Two microliters of the extracted samples was directly injected into LC/MS/MS. Chromatographic separation was achieved on a Capcell Pak C18 UG column (2 × 75 mm) with a gradient elution of methanol (mobile phase B) against 0.05% formic acid in aqueous 10 mm ammonium formate (mobile phase A). The LC flow rate was set to 0.28 mL/min and the gradient (solvent B concentration) was processed from 40 to 90%. In mass spectrometric detection, observation of the reaction from a double‐charged precursor ion [M + 2H]²⁺ (m/z 390) to product ion m/z 122 provided very high sensitivity. The method was validated with a lower limit of detection of 0.2 ng/mL with 0.1 mL of plasma, and the method was used to determine the plasma pharmacokinetics of vinorelbine in dogs. Copyright © 2010 John Wiley & Sons, Ltd.     

Rapid and sensitive determination of major polyphenolic components in Euphoria longana Lam. seeds using matrix solid‐phase dispersion extraction and UHPLC with hybrid linear ion trap triple quadrupole mass spectrometry

A rapid and sensitive method for the extraction and determination of four major polyphenolic components in Euphoria longana Lam. seeds is presented for the first time based on matrix solid‐phase dispersion extraction followed by ultra high performance liquid chromatography with hybrid triple quadrupole linear ion trap mass spectrometry. Matrix solid‐phase dispersion method was designed for the extraction of Euphoria longana seed constituents and compared with microwave‐assisted extraction and ultrasonic‐assisted extraction methods. An Ultra high performance liquid chromatography with hybrid triple quadrupole linear ion‐trap mass spectrometry method was developed for quantitative analysis in multiple‐reaction monitoring mode in negative electrospray ionization. The chromatographic separation was accomplished using an ACQUITY UPLC BEH C₁₈ (2.1 mm × 50 mm, 1.7 μm) column with gradient elution of 0.1% aqueous formic acid and 0.1% formic acid in acetonitrile. The developed method was validated with acceptable linearity (r² > 0.999), precision (RSD ≤ 2.22%) and recovery (RSD ≤ 2.35%). The results indicated that matrix solid‐phase dispersion produced comparable extraction efficiency compared with other methods nevertheless was more convenient and time‐saving with reduced requirements on sample and solvent volumes. The proposed method is rapid and sensitive in providing a promising alternative for extraction and comprehensive determination of active components for quality control of Euphoria longana products.     

Kinetics, thermodynamic and chromatographic behaviour of the uranyl ions sorption from aqueous thiocyanate media onto polyurethane foams

The retention profile of uranyl ions from aqueous thiocyanate media by polyether-type based polyurethane foams (PUFs) has been studied to gain more information regarding the mechanism of extraction. The effect of pH, shaking time, surfactant type, extraction media, temperature and analyte concentration on the retention of uranyl ions onto PUFs has been studied. It has been found that, the sorption of uranyl ions involved in the formation of a ternary complex ion associate of uranyl ion, thiocyanate and PUFs is highly dependent on these parameters. The kinetics and thermodynamics of the uranyl ions sorption have been studied in more detail. The dependency of the extraction on the parameters can be explained via a “solvent extraction,” mechanism. However, owing to the complex nature of the PUFs a dual-mode sorption mechanism involving both absorptions related to “solvent extraction” and an added component for “surface adsorption” may be operated simultaneously. Attempts for quantitative retention and recovery of the uranyl ions in tap and industrial waste water samples by the proposed PUFs columns has been carried out and satisfactory results have been obtained. The cellular structure of the PUF sorbent offer unique advantages over a conventional bulk type sorbents in rapid, versatile effective separation and/or preconcentration of uranyl ions.