A minimal core based fluorophore for selective detection of Zn(II) ions in aqueous solution and living cells

A minimal core based fluorophore was introduced as a selectively fluorescent "turn on" sensor for Zn(2+) ions in aqueous solution. Addition of Zn(2+) ions to the fluorophore generates a significant emission through a 1:1 ligand-to-metal complex. The fluorescence titration experiment of the minimal core based fluorophore with various metal ions shows that the pyromellitic diimide derivative also has the advantage of a high selectivity to Zn(2+) ions over other metals such as Ni(2+), or Co(2+), Cu(2+), Fe(3+), Fe(2+). More than 8 fold increase in the intensity of fluorescence was observed for the Zn(2+)-bound fluorophore compared to Zn-free fluorophore. Due to its small molecular size, the fluorophore was cell-permeable and successfully applied to the detection of Zn(2+) in living cells. With its relatively high sensitivity to Zn(2+) in living cells, the synthesized new fluorophore will be very useful in the studies on various biological functions of Zn(2+).     

Bright fluorescent chemosensor platforms for imaging endogenous pools of neuronal zinc

A series of new fluorescent Zinpyr (ZP) chemosensors based on the fluorescein platform have been prepared and evaluated for imaging neuronal Zn(2+). A systematic synthetic survey of electronegative substitution patterns on a homologous ZP scaffold provides a basis for tuning the fluorescence responses of "off-on" photoinduced electron transfer (PET) probes by controlling fluorophore pK(a) values and attendant proton-induced interfering fluorescence of the metal-free (apo) probes at physiological pH. We further establish the value of these improved optical tools for interrogating the metalloneurochemistry of Zn(2+); the novel ZP3 fluorophore images endogenous stores of Zn(2+) in live hippocampal neurons and slices, including the first fluorescence detection of Zn(2+) in isolated dentate gyrus cultures. Our findings reveal that careful control of fluorophore pK(a) can minimize proton-induced fluorescence of the apo probes and that electronegative substitution offers a general strategy for tuning PET chemosensors for cellular studies. In addition to providing improved optical tools for Zn(2+) in the neurosciences, these results afford a rational starting point for creating superior fluorescent probes for biological applications.     

A novel,cell-permeable,fluorescent probe for ratiometric imaging of zinc ion

Zn(2+) plays important roles in various biological systems; as a result, the development of tools that can visualize chelatable Zn(2+) has attracted much attention recently. We report here newly synthesized fluorescent sensors for Zn(2+), ZnAF-Rs, whose excitation maximum is shifted by Zn(2+) under physiological conditions. Thus, these sensors enable ratiometric imaging, which is a technique to reduce artifacts by minimizing the influence of extraneous factors on the fluorescence of a probe. Ratiometric measurement can provide precise data, and some probes allow quantitative detection. ZnAF-Rs are the first ratiometric fluorescent sensors for Zn(2+) that enable quantitative analysis under physiological conditions. ZnAF-Rs also possess suitable K(d) for applications, and high selectivity against other biologically relevant cations, especially Ca(2+). Using these probes, changes of intracellular Zn(2+) concentration in cultured cells were monitored successfully. We believe that these probes will be extremely useful in studies on the biological functions of Zn(2+).     

A chelation enhanced selective fluorescence sensing of Hg2+ by a simple quinoline substituted tripodal amide receptor

Two tris(2-aminoethyl)amine (tren) based tripodal amide fluoroionophores, 1 and 2, functionalized with quinoline (chelating fluorophore) and naphthalene (non-chelating fluorophore) respectively, are synthesized in good yields. Fluoroionophore 1 shows a selective UV-Vis spectral shift in the case of Hg(2+) in acetonitrile among different metal ions like Li(+), Na(+), Ca(2+), Mg(2+), Cr(2+), Mn(2+), Fe(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Cd(2+), Hg(2+), Pb(2+), and Ag(+). On the other hand, fluoroionophore 2 shows no selectivity towards any of the above metal ions in the UV-Vis study. Furthermore, 1 shows a selective chelation induced fluorescence enhancement in the presence of Hg(2+) whereas 2 shows the enhancement of fluorescence with most of the metal ions via a photoinduced charge transfer mechanism. The naked eye detection of Hg(2+) in an acetonitrile solution of 1 shows a greenish fluorescence upon UV light irradiation. The isolated Hg(2+) complex of 1, 3, shows a similar UV-Vis and fluorescence spectral output as observed from in situ spectroscopic studies of 1 in the presence of Hg(2+). Infra-red (IR) and (1)H- NMR studies also reveal the interaction of Hg(2+) with the quinoline nitrogen atoms as well as with the amide functionality.     

A highly selective on/off fluorescence sensor for cadmium(II)

A polypyridyl ligand, 2,3,6,7,10,11-hexakis(2-pyridyl)dipyrazino[2,3-f:2',3'-h]quinoxaline (HPDQ), was found to have excellent fluorescent selectivity for Cd(2+) over many other metal ions (K(+), Na(+), Ca(2+), Mg(2+), Mn(2+), Fe(2+), Ni(2+), Co(2+), Cu(2+), Ag(+), Hg(2+), Zn(2+), and Cr(3+)) based on the intramolecular charge-transfer mechanism, which makes HPDQ a potential fluorescence sensor or probe for Cd(2+). An obvious color change between HPDQ and HPDQ + Cd(2+) can be visually observed by the naked eye. The structure of the complex HPDQ-Cd has been characterized by X-ray crystallography. Density functional theory calculation results on the HPDQ and HPDQ-Cd complexes could explain the experimental results.     

DNAzyme-based fluorescent microarray for highly selective and sensitive detection of lead(II)

A facile microarray-based fluorescent sensor for the detection of lead (II) was developed based on the catalytic cleavages of the substrates by a DNAzyme upon its binding to Pb(2+). The release of the fluorophore labelled substrates resulted in the decrease of fluorescence intensity. The sensor had a quantifiable detection range from 1 nM to 1 μM and a selectivity of >20 fold for Pb(2+) over other metal ions.     

Ultrasensitive CE for heavy metal ions using the variations in the chemical structures formed from new octadentate fluorescent probes and cationic polymers

Novel fluorescent probes have been developed for the ultratrace detection of heavy metal ions by capillary electrophoresis using laser-induced fluorescence detection. Based on a molecular design, the probes are composed of an octadentate chelating moiety, a macrocyclic DOTA (tetraazacyclododecanetetraacetic acid) and an acyclic DTPA (diethylenetriaminepentaacetic acid) frame, a spacer and a fluorophore (fluorescein). These were chosen on the basis of their ability to form kinetically inert and highly emissive complexes, and to prevent a quenching effect even with heavy and paramagnetic metal ions. Addition of a cationic polymer, polybrene, in the separation buffer provided high resolution and simultaneous detection of Ca(2+), Mg(2+), Cu(2+), Zn(2+), Ni(2+), Co(2+), Mn(2+), Cd(2+) and Pb(2+). The direct fluorescence detection of these metal ions with high sensitivity at lower ppt levels, typically 2-7 × 10(-11) M (potentially sub-ppt), was successfully achieved. While separation of anionic compounds using a counter cation ("Ion Association (IA)" mode) is typically controlled by the ion association equilibrium constants, K(ass), it was found that differences in the mobilities, μ(ep(IAC)), of the ion association complexes formed between the probe complexes and counter cations are the driving forces for separation in this new method. This suggests that each of the polybrene-probe complexes has different chemical structures among metal ions, which were able to be determined by CD spectra in this investigation. This novel separation mode was termed the "Ion Association Complex (IAC)" mode, distinct from the IA mode.     

Triazole-linked-thiophene conjugate of calix[4]arene: its selective recognition of Zn2+ and as biomimetic model in supporting the events of the metal detoxification and oxidative stress involving metallothionein

Supramolecular calix[4]arene conjugate (L) has been developed as a sensitive and selective sensor for Zn(2+) in HEPES buffer among the 12 metal ion by using fluorescence, absorption and ESI MS and also by visual fluorescent color. The structural, electronic, and emission properties of the calix[4]arene conjugates L and its zinc complex, [ZnL], have been demonstrated using ab initio density functional theory (DFT) combined with time-dependent density functional theory (TDDFT) calculations. The TDDFT calculations reveal the switch on fluorescence behavior of L is mainly due to the utilization of the lone pair of electrons on imine moiety by the Zn(2+). The resultant fluorescent complex, [ZnL], has been used as a secondary sensing chemo-ensemble for the detection of -SH containing molecules by removing Zn(2+) from [ZnL] and forming {Cys/DTT·Zn} adducts as equivalent to those present in metallothioneins. The displacement followed by the release of the coordinated zinc from its Cys/DTT complex by heavy metal ion (viz. Cd(2+) and Hg(2+)), as in the metal detoxification process or by ROS (such as H(2)O(2)) as in the oxidative stress, has been well demonstrated using the conjugate L through the fluorescence intensity retrieval wherein the fluorescence intensity is the same as that observed with [ZnL], which in turn mimics the zinc sensing element (MTF) in biology.     

Phthalide-derived novel fluoroionophores incorporating picolylamino receptors: synthesis and response to metal cations

Phthalide derivatives incorporating mono- and di-picolylamino functionalities at the 6-position have been prepared as novel fluoroionophores and their fluorescence responses to metal cations have been investigated. These phthalides not only exhibited efficient fluorescence in an aqueous medium but also displayed fluorescence on-off response upon addition of transition-metal cations, namely Cu(2+). The 6-aminophthalide fluorophore served as the core of the fluorescent probes although it has rarely been applied to a chemosensor. To the best of our knowledge, these modified phthalides are the first 6-aminophthalide-derived fluorometric probes for metal cations, namely Cu(2+).     

基于脱氧核酶的新型铅离子荧光探针

将荧光猝灭基团修饰的17E脱氧核酶(17E DNAzyme)与荧光基团修饰的底物链通过6个脱氧核苷酸相连, 得到了一种新型的对Pb2+敏感的荧光探针. 由于DNAzyme与底物链发生分子内杂交, 荧光基团与猝灭基团相互靠近, 导致荧光猝灭. 当Pb2+存在时, DNAzyme被激活, 底物链被切断后释放出荧光基团标记的DNA片段, 从而产生明显的荧光信号. 据此可在常温下快速检测Pb2+, 检测下限为10 nmol/L. 在Zn2+, Mn2+, Co2+, Cd2+, Cu2+, Mg2+和Ni2+等多种二价金属离子中, 除Zn2+, Mn2+和Cd2+略有干扰外, 其它几种金属离子均无响应, 表明该荧光探针对Pb2+具有良好的选择性.     

Hinge sugar as a movable component of an excimer fluorescence sensor

[reaction: see text] The ring flip of a carbohydrate is employed for the tongs-like movable component of a metal ion sensor. A pair of separated pyrene groups attached to the carbohydrate component are placed side by side when it recognizes metal ions, affording excimer fluorescence. This novel molecular sensor is selective for Zn(2+) and Cd(2+).     

Ratiometric fluorescent sensor based on inhibition of resonance for detection of cadmium in aqueous solution and living cells

Although cadmium has been recognized as a highly toxic heavy metal and poses many detrimental effects on human health, the Cd(2+)-uptake and nosogenesis mechanisms are still insufficiently understood, mainly because of the lack of facile analytical methods for monitoring changes in the environmental and intracellular Cd(2+) concentrations with high spatial and temporal reliability. To this end, we present the design, synthesis, and photophysical properties of a cadmium sensor, DQCd1 based on the fluorophore 4-isobutoxy-6-(dimethylamino)-8-methoxyquinaldine (model compound 1). Preliminary investigations indicate that 1 could be protonated under neutral media and yield a resonance process over the quinoline fluorophore. Upon excitation at 405 nm, 1 shows a strong fluorescence emission at 554 nm with a quantum yield of 0.17. Similarly, DQCd1 bears properties comparable to its precursor. It exhibits fluorescence emission at 558 nm (Φ(f) = 0.15) originating from the monocationic species under physiological conditions. Coordination with Cd(2+) causes quenching of the emission at 558 nm and simultaneously yields a significant hypsochromic shift of the emission maximum to 495 nm (Φ(f) = 0.11) due to inhibition of the resonance process. Thus, a single-excitation, dual-emission ratiometric measurement with a large blue shift in emission (Δλ = 63 nm) and remarkable changes in the ratio (F(495 nm)/F(558 nm)) of the emission intensity (R/R(0) up to 15-fold) is established. Moreover, the sensor DQCd1 exhibits very high sensitivity for Cd(2+) (K(d) = 41 pM) and excellent selectivity response for Cd(2+) over other heavy- and transition-metal ions and Na(+), K(+), Mg(2+), and Ca(2+) at the millimolar level. Therefore, DQCd1 can act as a ratiometric fluorescent sensor for Cd(2+) through inhibition of the resonance process. Confocal microscopy and cytotoxicity experiments indicate that DQCd1 is cell-permeable and noncytotoxic under our experimental conditions. It can indeed visualize the changes of intracellular Cd(2+) in living cells using dual-emission ratiometry.     

A highly selective fluorescent sensor for distinguishing cadmium from zinc ions based on a quinoline platform

A fluorescent sensor, N-(quinolin-8-yl)-2-(quinolin-8-yloxy)acetamide (HL), based on 8-aminoquinoline and 8-hydroxyquinoline platforms has been synthesized. This sensor displays high selectivity and sensitive fluorescence enhancement to Cd(2+) in ethanol. Moreover, sensor HL can distinguish Cd(2+) from Zn(2+) via two different sensing mechanisms (photoinduced electron transfer for Cd(2+); internal charge transfer for Zn(2+)). The composition of the complex Cd(2+)/HL or Zn(2+)/L(-) has been found to be 1:1, based on the fluorescence/absorption titration and further confirmed by X-ray crystallography.     

一种高灵敏度高选择性的荧光素基比色荧光锌传感器

本文报道了一种基于荧光素的锌离子传感器FN1,其在甲醇溶液中显示了对锌离子极高的灵敏度和选择性。随着锌离子的滴加,紫外-可见光谱中最初在371 nm处的吸收峰消失,在437 nm处出现了一个新峰。当在混合金属离子的甲醇溶液中滴加了相对于二价金属离子的等物质的量浓度的锌离子或相对于一价金属离子0.5倍物质的量浓度的锌离子后,锌离子积分荧光强度增强了近37倍（Φ=0.48,λ_max(em)=513 nm）,估算的锌离子检测限为7 μg·L^-1。基于紫外-可见光、荧光和质谱的结果,讨论了1∶1的FN1/Zn²⁺配合物的结合机理。     

Novel probes showing specific fluorescence enhancement on binding to a hexahistidine tag

The introduction of hexahistidine (His tag) is widely used as a tool for affinity purification of recombinant proteins, since the His tag binds selectively to nickel-nitrilotriacetic acid (Ni(2+)-NTA) complex. To develop efficient "turn-on" fluorescent probes for His-tagged proteins, we adopted a fluorophore displacement strategy, that is, we designed probes in which a hydroxycoumarin fluorophore is joined via a linker to a metal-NTA moiety, with which it forms a weak intramolecular complex, thereby quenching the fluorescence. In the presence of a His tag, with which the metal-NTA moiety binds strongly, the fluorophore is displaced, which results in a dramatic enhancement of fluorescence. We synthesized a series of hydroxycoumarins that were modified by various linkers with NTA (NTAC ligands), and investigated the chemical and photophysical properties of the free ligands and their metal complexes. From the viewpoint of fluorescence quenching, Ni(2+) and Co(2+) were the best metals. Fluorescence spectroscopy revealed a 1:1 binding stoichiometry for the Ni(2+) and Co(2+) complexes of NTACs in pH 7.4 aqueous buffer. As anticipated, these complexes showed weak intrinsic fluorescence, but addition of a His-tagged peptide (H-(His)(6)-Tyr-NH(2); Tyr was included to allow convenient concentration measurement) in pH 7.4 aqueous buffer resulted in up to a 22-fold increase in the fluorescence quantum yield. We found that the Co(2+) complexes showed superior properties. No fluorescence enhancement was seen in the presence of angiotensin I, which contains two nonadjacent histidine residues; this suggests that the probes are selective for the polyhistidine peptide.     

An 2-(2'-aminophenyl)benzoxazole-based OFF-ON fluorescent chemosensor for Zn2+ in aqueous solution

A water-soluble fluorescent sensor, 1, based on the "receptor-spacer-fluorophore" [2-(2'-aminophenyl)benzoxazole-amide-2-picolylamine] sensor platform, demonstrates the high sensitivity for Zn(2+) with a 25-fold fluorescence enhancement upon chelation to Zn(2+) and also exhibits high selectivity to Zn(2+) over other metal ions. X-ray crystal structure of Zn(2+) complex reveals that the amide oxygen (O2) cooperates with 2-picolylamine unit (N3, N4) as a receptor bind Zn(2+).     

Reengineering of a fluorescent zinc sensor protein yields the first genetically encoded cadmium probe

Introduction of a (Cys)(4) metal binding site at the dimerization interface of two fluorescent protein domains yields a chelating FRET sensor protein that shows a 2500-fold selectivity for Cd(2+) over Zn(2+) by taking advantage of their different ionic radii.     

Poly(amine ester) dendrimer with naphthyl units as a fluorescent chemosensor for Al(III), Cu(II), and Zn(II).

A poly(amine ester) dendrimer with naphthyl units (G1N6) has been synthesized as a fluorescent chemosensor for metal ions. We investigated the metal-ion recognition of G1N6 by adding each of Ag(+), Al(3+), Ba(2+), Ca(2+), Cd(2+), Co(2+), Cu(2+), Fe(3+), Mg(2+), Ni(2+), and Zn(2+) in acetonitrile solution. Large changes were observed in the fluorescence spectra of G1N6 upon the addition of Al(3+), Cu(2+), and Zn(2+).     

Incorporation of triazole into a quinoline-rhodamine conjugate imparts iron(iii) selective complexation permitting detection at nanomolar levels

Two new rhodamine based probes 1 and 2 for the detection of Fe(3+) were synthesized and their selectivity towards Fe(3+) ions in the presence of other competitive metal ions tested. The probe 1 formed a coloured complex with Fe(3+) as well as Cu(2+) ions and revealed the lack of adequate number of coordination sites for selective complexation with Fe(3+). Incorporation of a triazole unit to the chelating moiety of 1 resulted in the probe 2, that displayed Fe(3+) selective complex formation even in the presence of other competitive metal ions like Li(+), Na(+), K(+), Cu(2+), Mg(2+), Ca(2+), Sr(2+), Cr(3+), Mn(2+), Fe(2+), Co(2+), Ni(2+), Zn(2+), Cd(2+), Hg(2+) and Pb(2+). The observed limit of detection of Fe(3+) ions (5 × 10(-8) M) confirmed the very high sensitivity of 2. The excellent stability of 2 in physiological pH conditions, non-interference of amino acids, blood serum and bovine serum albumin (BSA) in the detection process, and the remarkable selectivity for Fe(3+) ions permitted the use of 2 in the imaging of live fibroblast cells treated with Fe(3+) ions.     

A copper(II) ion-selective on-off-type fluoroionophore based on zinc porphyrin-dipyridylamino

A new copper(II) fluorescent sensor 5,10,15,20-tetra((p-N,N-bis(2-pyridyl)amino)phenyl)porphyrin zinc (1) has been designed and synthesized by the Ullmann-type condensation of bromoporphyrin zinc with 2,2'-dipyridylamine (dpa) under copper powder as a catalyst as well as with K2CO3 as the base in a DMF solution. It consists of two separately functional moieties: the zinc porphyrin performs as a fluorophore, and the dpa-linked-to-zinc porphyrin acts as a selected binding site for metal ions. It displays a high selectivity and antidisturbance for the Cu2+ ion among the metal ions examined (Na+, Mg2+, Cr3+, Mn2+, Fe2+, Co2+, Ni2+, Cu2+, Ag+, Zn2+, Cd2+, Hg2+, and Fe3+) and exhibits fluorescence quenching upon the binding of the Cu2+ ion with an "on-off"-type fluoroionophoric switching property. The detection limit is found to be 3.3 x 10(-7) M (3s blank) for Cu2+ ion in methanol solution, and its fluorescence can be revived by the addition of EDTA disodium solution. The design strategy and remarkable photophysical properties of sensor 1 help to extend the development of fluorescent sensors for metal ions.