Calculation of optical properties of liquid crystal devices using the transmission line matrix (TLM) method

The TLM method uses the voltages and currents on a three-dimensional network of transmission lines to model the electric and magnetic field and loss components of Maxwell's equations. Optical fields within anisotropic media may be easily modelled and results are presented for calculation of the transmission spectra of a Freedericksz transition liquid crystal device. The method is well suited to the calculation of transmission spectra; calculations agree well with spectrometer measurements on an actual liquid crystal device.     

A matrix method for modelling liquid crystal textures

A simple method for modelling the textures of liquid-crystalline phases, recently proposed by Bedford et al., is here rewritten in matrix form. A formal similarity is found between their method and the continuum theory of liquid crystals. Disclination patterns are simulated by solving a modified matrix equation.     

Comparisons of the vector method and tensor method for simulating liquid crystal devices

In calculating the director configuration in a liquid crystal device, two methods are commonly employed: a vector model and a tensor model. In this paper, we compare and contrast these methods for liquid crystal devices consisting of a layer of liquid crystal sandwiched between two plates. We compare the reliability and accuracy of the results, the speed of computation and the complexity of implementations of each method.     

Comparisons of the vector method and tensor method for simulating liquid crystal devices

In calculating the director configuration in a liquid crystal device, two methods are commonly employed: a vector model and a tensor model. In this paper, we compare and contrast these methods for liquid crystal devices consisting of a layer of liquid crystal sandwiched between two plates. We compare the reliability and accuracy of the results, the speed of computation and the complexity of implementations of each method.     

A hybrid-aligned polymer network liquid crystal: optical and electro-optical properties

We have studied the influence of polymer network liquid crystal alignment on optical and electro-optical properties. Composite alignment (parallel/homeotropic) was investigated in comparison with symmetric parallel/parallel and homeotropic/homeotropic alignments. The applied voltage leads to a reflective wavelength shift towards low wavelengths according to two modes in the case of symmetric planar alignment. Depending on polymerization conditions, a band broadening can be obtained, but a total reversibility of the optical properties is not recovered after application of a high voltage to the samples. The layer thickness appears to be a fundamental parameter in the case of a hybrid-aligned active layer and a wide band is obtained after measurements ( I - V ) using increasing voltages.     

A hybrid-aligned polymer network liquid crystal: optical and electro-optical properties

We have studied the influence of polymer network liquid crystal alignment on optical and electro-optical properties. Composite alignment (parallel/homeotropic) was investigated in comparison with symmetric parallel/parallel and homeotropic/homeotropic alignments. The applied voltage leads to a reflective wavelength shift towards low wavelengths according to two modes in the case of symmetric planar alignment. Depending on polymerization conditions, a band broadening can be obtained, but a total reversibility of the optical properties is not recovered after application of a high voltage to the samples. The layer thickness appears to be a fundamental parameter in the case of a hybrid-aligned active layer and a wide band is obtained after measurements (I - V) using increasing voltages.     

Effects of silver nanoparticle doping on the electro-optical properties of polymer stabilized liquid crystal devices

ABSTRACT

Polymer stabilised liquid crystal (PSLC) devices are widely used in various smart light modulation occasions. Their electro-optical properties can still be improved to address future challenges. It is well known that doping liquid crystal (LC) materials with nanoparticles can change the material’s electro-optical performance. In this study, silver nanoparticles (AgNPs) with size about 15–20 nm and surfactant were doped into PSLC devices. The effects of AgNPs doping on the PSLC electro-optical performances were studied. The result shows that AgNPs and surfactant doping can increase the dielectric anisotropy of LC mixture. PSLC devices with AgNPs doping have lower driving voltage and response time than un-doped PSLC devices. Therefore, doping of a specific concentration of AgNPs resulted in PSLC devices with improved electro-optical performance.     

Preparation and electro‐optical properties of polymer dispersed liquid crystal films with relatively low liquid crystal content

In this paper, polymer dispersed liquid crystals (PDLC) films with LC content as low as 40 wt% were prepared, and the electro‐optical properties were carefully investigated. To accomplish this, different (meth)acrylate copolymerizaiton monomers have been used. The electro‐optical properties and morphologies of the PDLC films were strongly influenced by the chemical structure of copolymerization monomers (hydroxypropyl methacrylate (HPMA), glycidyl methacrylate, hydroxypropyl acrylate) and their feed ratio. Lower driven voltage and higher contrast ratio were achieved when the PDLC films showed a morphology with suitably LC domain size. At high HPMA content, a thin polymer film was formed on the surface of PDLC samples, which is beneficial to decrease the total LC content in PDLC devices. Copyright © 2013 John Wiley & Sons, Ltd.     

The effect of mono-sized liquid crystal domains on electro-optical properties in a polymer dispersed liquid crystal prepared by using monodisperse poly(methylmethacrylate)/liquid crystal microcapsules

Highly mono-sized poly(methyl methacrylate) (PMMA)/liquid crystal (LC) microcapsules having a mono-sized single LC domain were prepared by the solute codiffusion method and solvent evaporation. The size of the LC domain in the microcapsules could be controlled by the amount of LC introduced during the swelling stage. The electro-optical properties of the polymer dispersed liquid crystal (PDLC) prepared by using the microcapsules was highly improved. In particular, the threshold voltage was lowered and the switching behaviour with an applied electric field was sharpened drastically compared with PDLC prepared simply by solvent evaporation-induced phase separation.     

The effect of mono-sized liquid crystal domains on electro-optical properties in a polymer dispersed liquid crystal prepared by using monodisperse poly(methylmethacrylate)/liquid crystal microcapsules

Highly mono-sized poly(methyl methacrylate) (PMMA)/liquid crystal (LC) microcapsules having a mono-sized single LC domain were prepared by the solute codiffusion method and solvent evaporation. The size of the LC domain in the microcapsules could be controlled by the amount of LC introduced during the swelling stage. The electro-optical properties of the polymer dispersed liquid crystal (PDLC) prepared by using the microcapsules was highly improved. In particular, the threshold voltage was lowered and the switching behaviour with an applied electric field was sharpened drastically compared with PDLC prepared simply by solvent evaporation-induced phase separation.     

Calculation of the properties of liquid chloroform by the Monte Carlo method

A version of the Monte Carlo method for the study of the properties of pure liquids and solutions that was previously developed by Levchuk et al. was modified for the case of liquid chloroform. A single-center potential of the interaction of chloroform molecules was plotted by using trial Monte Carlo calculations. The potential makes it possible to calculate satisfactorily the energy and structural characteristics of chloroform.Translated from Teoreticheskaya i Ékperimental'naya Khimiya, Vol. 25, No. 1, pp. 74–76, January–February, 1989.     

Morphology and optical properties of liquid crystals embedded in polyester resin matrix

This paper reports on morphological, thermo-optical, and electro-optical results of UV-cured polyester resin film containing liquid-crystal nematic and cholesteric domains. Electro-optic measurements were performed in an applied d.c. electric field. The morphological structure of PDLC film is modified by the various methods of their preparation. Size-distribution curves drawn vs the duration of the initial cooling obtained for cholesteric liquid crystal domains are presented.     

Application of photosensitive polyimides as alignment layer to optical switching devices of a nematic liquid crystal

We have explored the change in alignment of a nematic liquid crystal, 4'-pentyl-4-cyanobiphenyl (5CB) with three types of photosensitive polyimide as the alignment layer by photoirradiation at 366 nm. The photosensitive polyimide alignment layer induced a reversible change in alignment of 5CB. It was observed that the 5CB molecules became aligned from homogeneous alignment to homeotropic on photoirradiation with a d.c. electric field as a bias, and reversed to the homogeneous state when photoirradiation was ceased. This result indicates that optical switching could be repeated by on and off switching of the excitation light at 366 nm. The optical switching of the nematic liquid crystal might be mainly due to a photophysical change in the polyimide surface which is affected by the chemical structures of the polyimides at the temperature at which 5CB exhibits a nematic phase. The optical switching of nematic liquid crystals with photosensitive polyimides as the alignment layer is a novel driving method for nematic liquid crystals.     

Application of photosensitive polyimides as alignment layer to optical switching devices of a nematic liquid crystal

We have explored the change in alignment of a nematic liquid crystal, 4'-pentyl-4-cyanobiphenyl (5CB) with three types of photosensitive polyimide as the alignment layer by photoirradiation at 366 nm. The photosensitive polyimide alignment layer induced a reversible change in alignment of 5CB. It was observed that the 5CB molecules became aligned from homogeneous alignment to homeotropic on photoirradiation with a d.c. electric field as a bias, and reversed to the homogeneous state when photoirradiation was ceased. This result indicates that optical switching could be repeated by on and off switching of the excitation light at 366 nm. The optical switching of the nematic liquid crystal might be mainly due to a photophysical change in the polyimide surface which is affected by the chemical structures of the polyimides at the temperature at which 5CB exhibits a nematic phase. The optical switching of nematic liquid crystals with photosensitive polyimides as the alignment layer is a novel driving method for nematic liquid crystals.     

Nano P(VDF-TrFE) doped polyimide alignment layers for twisted nematic liquid crystal devices

ABSTRACT

The rapid development of consumer electronics and portable devices imposes a great demand for energy efficient information display systems. Among the information display devices, liquid crystal display (LCD) devices stands in the front. The fabrication of energy-efficient LCD systems demands new material and techniques. In this work, the conventional polyimide alignment layer of twisted nematic liquid crystal device (TNLCD) was replaced with ferroelectric polymer nanoparticle doped alignment layer. Morphology of the alignment layer was analysed using field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM). The ferroelectric nature of the polymer alignment layer was studied using dynamic contact electrostatic force microscopy (DC-EFM). TNLCD cells are fabricated with this modified alignment layer and the switching characteristics are compared with the conventional TNLCD devices. The TNLCD with modified alignment layer has shown a reduction of 50% in threshold (V_thr) and 47% reduction in saturation voltage (V_sat).     

Digital optical memory devices based on polymer-dispersed liquid crystals films: appropriate polymer matrix morphology

ABSTRACT

Permanent memory effect (PME) in polymer dispersed liquid crystal (PDLC) allows a greater applicability range than traditional PDLCs. One of the most interesting application could be the possible storing of optical information, the so-called Digital Optical Memory (DOM) devices. To test this application it would be required a display structure having an array of pixels addresses. Each pixel was filled with PDLC film with PME and electric field can be independently applied to different PDLC elements to define on/off pixel states (transparent or scattering states).PDLC films were obtained from a mixture of E7 nematic liquid crystal and poly(ethylene glycol) dimethacrylate with 875 g mol^-1oligomer as precursor of the polymeric matrix. The effect of the curing temperature and the UV light intensity as well time exposure during the polymerisations on the electro-optical performance of PDLC films were investigated. In this way, a high transparency state (T_OFF=55%) for a long period of time at room temperature even after the applied voltage has been switched off were obtained, started from an opaque state (T₀=0%) and after reaching a transparent state (T_MAX=75%), which causes 73% PME. The application to an 8x8 passive matrix using PDLC with PME is also demonstrated as proof-of-principle.     

香草醛晶体光学非线性系数的有限场方法研究

采用有限场方法计算了有机非线性材料3-甲氧基-4-羟基-苯甲醛(分子式C~8H~8O~3,简称MHBA)的二阶非线性光学系数d~2~1,d~2~2,d~2~3,d~2~5。研究结果表明在MP2近似和6-31G+(p,d)基组水平上理论值能较好地与实验值符合,同时也表明拉电子基团HC＝O和推电子基团HO对MHBA分子的光学非线性性能的影响很大,而晶体中分子间的氢键作用对d值的贡献很小。     

Anomalous optical properties of photoactive cholesteric liquid crystal doped with single-walled carbon nanotubes

Optical transmission and selective reflection data are reported for suspensions of single-walled carbon nanotubes (CNTs) in photoactive nematic material ZhK-440 with a mesogenic chiral dopant M5. At small concentrations of CNTs (C ≈ 0.01–0.05%), the preferential localisation of CNTs at oily sticks (cholesteric topological defects) and suppression of the network of oily streaks by CNTs were observed. At the same time, the optical density D was shown to be essentially non-linear and a minimum at certain concentration of CNTs, C ≈ 0.05–0.08%, was observed. This anomalous behaviour was explained by the presence of the structural transition from the loose (ramified) aggregates with highly anisotropic shape (oriented along the anchoring direction on rubbed polyvinyl alcohol) to the compact aggregates with denser packing. The location of this minimum, as well as the selective reflection maximum (helical pitch), was sensitive to partially reversible UV-induced trans–cis–trans isomerisation effects. The UV-controlled helical pitch variation was shown to be only slightly affected by introduction of CNTs.     

An optical study of phase transitions of poly (ethylene terephthalate-co-p-hydroxybenzoic acid) liquid crystal

The copolyester containing 40 mol % ethylene terephthalate (PET) and 60 mol % p-hydroxybenzoate (HB) units has been reported by several investigators to be biphasic in the solid and the liquid states. The reported thermal transitions in the two phases, however, are in part contradictory, perhaps partly due to different polymerization conditions. The present work is a study of the transitions in each of the two phases of this copolyester by polarized light microscopy and by light transmission measurements. By light transmission measurements, the two phases were found to have two different glass transition temperatures for the onset of segmental motion, consistent with two assignable temperatures (T.). Cold crystallization and melting in each of the two different phases was also detected. The results help clarify the nature of transitions and agree with the results of dynamic mechanical analysis on the same thermotropic liquid crystalline copolyester.     

Structural ordering and molecular-optical properties of a discotic liquid crystal (Colho)

The infrared absorbance and the dispersion of the refractive indices in the region 0.49-0.63 µm of the discotic mesogen 2,3,6,7,10,11-hexaheptyloxytriphenylene were studied for the columnar and isotropic phases. The temperature dependence of the orientational order parameter S and the local field parameters of a light wave acting on the sample have been evaluated. It is shown that the mixing of molecular excitations modifies the behaviour of S as a function of temperature. Molecular-optical properties of the triphenylene derivative, such as the anisotropy of the polarizability, Δγ and the mean polarizability, &gammatilde; were investigated on the basis of the generalized Lorenz-Lorentz relation for uniaxial liquid crystals. The experimentally observed changes of these properties in the columnar phase seem to be affected by the induction mechanism of the change in the molecular polarizability with increasing S.