Synthesis and properties of organic–inorganic hybrid liquid crystal gels

Organic–inorganic hybrid liquid crystal (LC) gels have been synthesised by the thiol-ene reaction of a multifunctional cyclic siloxane, 1,3,5,7-tetravinyl-1,3,5,7-tetramethylcyclotetrasiloxane (TVMCTS) and alkane dithiols, 1,6-hexanedithiol (HDT) or 1,9-decanedithiol (DDT), in LC matrices, 4-cyano-4?-pentylbiphenyl (5CB) or 4′-n-octyl-4-cyano-biphenyl (8CB). The LC gels were prepared in an isotropic phase at 70°C or mesophases at 25°C using radical initiators. The phase transition temperatures from a mesophase to an isotropic phase of the resulting gels were lower than those of the original LCs. The gels containing 8CB (8CB gels) prepared at 25°C showed two phase transitions: smectic-to-nematic and nematic-to-isotropic transitions. By contrast, the 8CB gels synthesised in the isotropic phase showed only one phase transition from smectic phase directly to isotropic phase. Reaction conversions in the LC gels prepared at 70°C were higher than that in the gels prepared at 25°C. Scanning microscopic light scattering analysis of the LC gels cleared homogeneous small size mesh with a small amount of large defect. Polarisation micrographs of the LC gels showed framed optical textures derived from the LC molecules at room temperature. The LC gels containing more than 90 wt% of LC showed electro-optic response.     

Effect of Film Thickness on the Columnar Packing Structures of Discotic Supramolecules in Thin Films

The effects of film thickness on the columnar packing structure of discotic supramolecules in a thin supported film have been investigated by grazing‐incidence small‐angle X‐ray scattering technique using magnetically aligned cobalt octa(n‐decylthio)porphyrazine (CoS10) films on octadecyltrichlorosilane (OTS)‐functionalized substrates as model systems. Magnetically aligned CoS10 films with a range of film thicknesses (49–845 nm) form uniaxially oriented ‘edge‐on’ columnar superstructures with their columnar directors perpendicular to the applied magnetic field. However, the orientational ordering of the columnar packing in the plane perpendicular to the applied magnetic field is strongly dependent on the film thickness. While being damped by the elasticity of the side chains of CoS10, the strong interfacial interaction at the film‐substrate interface propagates up to 50–100 nm from the substrate, maintaining the orientation of columnar packing in the plane perpendicular to the applied magnetic field. When the distance from the film‐substrate interface becomes larger than about 100 nm, symmetric tilting of columnar layer orientation, which saturates at 11.5°, occurs due to longitudinal edge dislocations induced by accumulated elastic deformation.     

Preparation of ordered and crosslinked films from liquid crystalline vinyl ether monomers

Thermally stable ordered films were prepared by in-situ photopolymerization of an oriented monomer mixture, consisting of mesogenic monofunctional and bifunctional vinyl ethers. Orientation was achieved by a simple surface treatment, using an unidirectionally rubbed polyimide film. The films restored their orientation when cooled down from temperatures of 200°C. Highly ordered densely crosslinked films have been prepared by polymerization of bifunctional mesogenic vinyl ether monomers. Polymerization from various monomer phases resulted in LC polymer network films with different molecular organizations. It was shown that films with nematic, smectic A and smectic B structures were obtained, the latter having a very high degree of orientation. The films were analyzed with small-angle X-ray scattering, polarized light microscopy and infrared- dichroism measurements.     

Local high-density distributions of phospholipids induced by the nucleation and growth of smectic liquid crystals at the interface

Amphiphilic molecules adsorbed at the interface could control the orientation of liquid crystals (LCs) while LCs in turn could influence the distributions of amphiphilic molecules. The studies on the interactions between liquid crystals and amphiphilic molecules at the interface are important for the development of molecular sensors. In this paper, we demonstrate that the development of smectic LC ordering from isotropic at the LC/water interface could induce local high-density distributions of amphiphilic phospholipids. Mixtures of liquid crystals and phospholipids in chloroform are first emulsified in water. By fluorescently labeling the phospholipids adsorbed at the interface, their distributions are visualized under fluorescent confocal microscope. Interestingly, local high-density distributions of phospholipids showing a high fluorescent intensity are observed on the surface of LC droplets. Investigations on the correlation between phospholipid density, surface tension and smectic LC ordering suggest that when domains of smectic LC layers nucleate and grow from isotropic at the LC/water interface as chloroform slowly evaporates at room temperature, phospholipids transition from liquid-expanded to liquid-condensed phases in response to the smectic ordering, which induces a higher surface tension at the interface. The results will provide an important insight into the interactions between liquid crystals and amphiphilic molecules at the interface.     

Unique molecular orientation in a smectic liquid crystalline polymer film attained by surface-initiated graft polymerization

Liquid crystalline (LC) polymer brushes containing a mesogenic azobenzene (Az) moiety are synthesized on a quartz or silicon substrate by surface-initiated atom transfer radical polymerization. The molecular orientation of the Az units and the LC properties in the grafted chains are evaluated by UV-vis spectroscopy, polarized optical microscopy, and grazing incidence X-ray diffraction measurements. The Az side chains of the grafted chains exhibited a smectic LC phase in which the smectic layers are oriented perpendicular to the substrate with a parallel orientation of the mesogens. In contrast, a spincast film of the identical LC polymer without grafting to the surface shows layer structures parallel to the substrate. A drastic effect of tethering one end to the substrate on the LC orientation is demonstrated.     

Surface ordering at the air–nematic interface. Part 2. A spectroscopic ellipsometry study of orientational order

Spectroscopic ellipsometry has been used to measure enhanced orientational ordering at the nematic–air interface of 8CB as the smectic A phase was approached by cooling from the isotropic phase. The depth profile of the orientational order has been estimated by calculating the ellipsometric parameters for a homeotropic uniaxial surface film on a uniaxial sub‐phase using the Abelès matrix method. This showed that the depth of the enhanced orientationally ordered region was ～10 nm at 0.5°C above the nematic–smectic A transition. This is substantially less than the thickness of the region with surface enhanced smectic order as determined by neutron reflection and a model of the surface structure consistent with both sets of results is proposed.     

Morphology of side chain liquid crystalline block copolymer thin films and effects of thermal annealing

The self-assembly behavior of siloxane based side chain liquid crystalline block copolymer thin films are investigated via grazing incidence small angle X-ray scattering and atomic force microscopy. The as-spun films displayed polystyrene cylinders perpendicular to the substrate and the cylinders reoriented parallel to the surface after thermal annealing. The morphology observed in the as-spun films is resultant from the orientation of the smectic LC mesophase relative to the substrate. Annealing above both the polystyrene glass transition temperature and the smectic to isotropic transition temperature eliminates the influence of the LC phase, leading to a reorientation of the morphology that minimizes the interfacial energy of the system. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3263–3266, 2007     

Alignment of liquid crystals using Langmuir‒Blodgett films of unsymmetrical bent-core liquid crystals

ABSTRACT

The properties of the thin films of liquid crystal (LC) molecules can be governed easily by external fields. The anisotropic structure of the LC molecules has a large impact on the electrical and optical properties of the film. The Langmuir monolayer (LM) of LC molecules at the air–water interface is known to exhibit a variety of surface phases which can be transferred onto a solid substrate using the Langmuir?Blodgett (LB) technique. Here, we have studied the LM and LB films of asymmetrically substituted bent-core LC molecules. The morphology of LB film of the molecules is found to be a controlling parameter for aligning bulk LC in the nematic phase. It was found that the LB films of the bent-core molecules possessing defects favour the planar orientation of nematic LC, whereas the LB films with fewer defects show homeotropic alignment. The defect in LB films may introduce splay or bend distortions in the nematic near the alignment layer which can govern the planar alignment of the bulk LC. The uniform layer of LB film facilitates the molecules of nematic to anchor vertically due to a strong van der Waals interaction between the aliphatic chains leading to a homeotropic alignment.     

Structure and properties of polypropylene crystallized from the glassy state

Glassy isotactic propylene (PP) films of thickness up to 0.3 mm were obtained by an ultraquenching technique. The structure and properties of the as-quenched and subsequently crystallized samples were characterized by various techniques. Electron microscopy indicates the glass has no structure larger than 25 Å. X-ray diffraction shows PP crystallizes from the glass into a smectic structure at ca. ?20°C and then transforms to monoclinic microcrystals at ca. 40°C; a nodular structure (80 to 100 Å in diameter) was observed on the surface. The transformation temperature increases with the film thickness. Annealing above the α-relaxation temperature results in an increase in the nodule size. A correspondence was found between the diameter of the nodules observed on the surface and long spacings obtained by small-angle X-ray scattering from the bulk. Dynamic mechanical spectra show the presence of two relaxation-like peaks at ca. ?10°C and 10°C for the as-ultraquenched samples. X-ray scattering, differential scanning calorimetry (DSC), and torsion pendulum measurements show PP crystallizes from the glass at a temperature, depending on the rate of heating, that corresponds to the lower relaxation peak temperature.     

Effects of temperature on the alignment and electrooptical responses of a nematic nanoscale liquid crystalline film

The surface-induced alignment and electrooptical (EO) dynamics of a 50-nm-thick liquid crystalline (4-n-pentyl-4'-cyanobiphenyl; 5CB) film were studied at three temperatures: 25 and 33 degrees C (near the crystalline-nematic and nematic-isotropic transition temperatures, respectively) and 29 degrees C (a median temperature in the stability region of the nematic phase). The ZnSe surfaces that entrap the liquid crystal (LC) film have been polished unidirectionally to produce a grooved surface presenting nanometer-scale corrugations, a structure that induces a planar and homogeneous orientation in the nematic phase. The present work attempts to understand the influences of temperature on the surface-induced alignment and corresponding EO dynamics of the material. Step-scan time-resolved spectroscopy measurements were made to determine the rate constants for the electric-field-induced orientation and thermal relaxation of the 5CB film. The field-driven orientation rates vary sensitively with temperature across a range that spans the stability limits of the nematic phase; the relaxation rates, however, vary very little across this same temperature range. We propose that these differences in LC behavior arise as consequence of the interplay of the temperature dependence of the elastic constants, viscosity, and degree of orientational order of the LC medium. A simple theoretical model provides some understanding of these behaviors.     

Ferroelectric smectic meso-phase formed by banana-shaped achiral liquid crystals

A new banana-shaped achiral molecule, 1,3-phenylene bis[4-(3-chloro-4-n-octyloxyphenyliminomethyl)benzoate] (PBCOB) has been synthesized, and its ferroelectric properties and homeotropic alignment investigated. The presence of a lateral chloro-substituent in the Schiff 's base moiety prevents the regular stacking of molecules and results in lowering the transition temperature and the degree of crystallinity of the switchable banana phase. Their smectic mesophases, including a switchable banana phase B₇, were characterized by differential scanning calorimetry, X-ray scattering and polarizing optical microscopy. Both the left- and right-handed helical domains are spontaneously formed upon cooling from the isotropic liquid to the switchable banana phase B₇. By X-ray study, the smectic phases showed a layer spacing of 38.1 Å, compatible with the end-to-end distance of the molecule with a bent conformation. Significantly, the smectic B7 phase exhibited a periodicity of 292 Å that corresponds to a helical structure with periodicity about 7.5 times 38.1 Å. The spontaneous polarization for PBCOB is about 50 nCcm^-2 and shows a temperature dependence. The ferroelectric lyomesophase of PBCOB showed a ferroelectric electro-optical switching range extending more than 50°C, switchable at room temperature.     

液晶/水界面上的氢键作用诱导液晶取向转变

本文提出液晶/水界面上氢键作用可以诱导热致型液晶(戊基联苯氰,简称: 5CB)发生取向转变.当液晶5CB膜接触酚类(如对硝基苯酚)水溶液的时候,由于酚类物质的酚羟基与液晶5CB分子中的氰基在液晶水界面上形成了氢键,在氢键的作用下使得液晶5CB由平行取向转变成了垂直取向.此外,还利用了液晶传感器可视化了酚类物质与牛血清蛋白(BSA)之间的相互作用.本文的研究结果可为研究液晶/水界面上的界面现象提供新的思路,并且有望开发出基于氢键作用的液晶生物化学传感技术.     

偶氮聚合物表面起伏光栅用于液晶定向研究

液晶显示具有低功耗、高画质、轻巧等优点，广泛应用于各种平板显示装置．使液晶分子能在显示器中均匀的定向排列是液晶显示的关键技术之一．液晶定向技术的主要方法有摩擦法、SiOx等氧化物或Au、Pt等金属蒸镀法、紫外偏振光(或激光)辐照法等．所谓摩擦法，即通过将基片在均匀移动的丝绒布表面摩擦来实现的．一般认为摩擦法是通过摩擦在基板表面形成的微沟槽来诱导     

Syntheses and alignment behavior of liquid crystalline polymethacrylates having 2‐ and 4‐styrylpyridine moieties

Two kinds of polymethacrylates, 1 and 2 , with 2‐styrylpyridine and 4‐styrylpyridine moiety as a photoreactive group, which have a benzoate group as a mesogenic unit, and hexylene group as a flexible spacer in the same side chain, were synthesized to characterize their alignment behaviors. The UV absorption and fluorescence studies on the two polymers revealed that the latter polymer with the 4‐stylrylpyridine moiety is more aggregative than the former polymer with the 2‐styrylpyridine moiety. The polymer 1 showed a nematic phase structure at 170 °C, while 2 appeared in a partially bilayered smectic A phase structure in the homeotropic direction at 175 °C. The polymer 1 film generated an in‐plane alignment by a linearly polarized UV light irradiation and subsequent annealing, and its direction was parallel with respect to the irradiation. On the other hand, the polymer 2 film with the same treatments gave a high out‐of‐plane order parameter of 0.73 in a wide temperature range of 120–240 °C. The significant differences in the aggregation behavior, the liquid‐crystalline structure, and the alignment between the two polymers were discussed by the structural differences between the 2‐ and 4‐styrylpyridine moieties in the two polymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5371–5380, 2008     

Interface influenced phase transitions of alkylcyanobiphenyl liquid crystals A calorimetric study

Abstract

Using an AC-calorimetry technique, we report measurements of the heat capacity and the phase shift between the applied heating power and the resulting thermal oscillations on the thermotropic liquid crystal series of alkylcyanobiphenyl (nCB) above the tricritical point. Specifically, we studied the first order phase transition smectic A to isotropic as a function of substrate, under atmospheric pressure. Different combinations of sapphire, Kapton type 200H polyimide film and air, are used to vary systematically the interfaces encountered by a liquid crystal. The calorimeter uses a sapphire disk, 10 mm in diameter and 0·13 mm thick, above which the samples are placed. A second sapphire disk, or a disk-shaped Kapton film, are used to sandwich the liquid crystal. Air interface samples are droplets allowed to spread naturally on the chosen substrate. The chosen geometry is such that interface effects appear to be maximized. Striking features found in the heat capacity and the phase shift studies with 10CB and 12CB will be presented for the different interfaces.     

Field dependence of the optical activity of a chiral liquid crystal near the isotropic–smectic A transition

Abstract

Chiral liquid crystals exhibit molecular optical activity in the isotropic phase. We have studied the evolution of the optical activity as a function of an applied electric field on a 76·2 μm film of the chiral liquid crystal W7, which exhibits an isotropic–smectic A transition at approximately 40°C. We measured the optical activity by recording the rotation of the plane of polarization of an incident linearly polarized ray of light, provided by a He–Ne laser. The applied biasing electric field is parallel to the direction of the incident beam. We find that at 41·0°C, the plane of polarization shifts from ?1·1° for an applied voltage of 30 V to a maximum of ?4·0° at 70 V. The absolute value of the signal decreases beyond this voltage. These shifts are in the direction of the smectic A phase and are in general larger than those observed as a function of temperature. Close to the isotropic–smectic A phase transition, molecules inside the liquid coalesce to form dynamic coherent groups, which have smectic nature. These groups are randomly oriented with respect to each other in the absence of an electric field. The application of an electric field causes the molecules within these groups to align along the direction of the field and to contribute coherently to the optical activity of the system. The way the molecules align with the field depends on the relative values of the polarizability α, which contributes to the alignment of the long axis of the molecule, and the dipole moment p, which contributes to the alignment of the short axis of the molecule. Our preliminary results and calculations suggest that for small fields, the electric field couples with the dipole moment p, whereas for fields in excess of 70 V, the field couples with the polarizability of the long axis of the molecule, causing a rotational reorientation of the molecules in the isotropic phase. The value of the field at which this reorientation occurs may be controlled by temperature.     

Single molecule spectroscopy of conjugated polymer chains in an electric field-aligned liquid crystal

Using single molecule polarization spectroscopy, we investigated the alignment of a polymer solute with respect to the liquid crystal (LC) director in an LC device while applying an external electric field. The polymer solute is poly[2-methoxy-5-(2'-ethyl-hexyloxy)-1,4-phenylene vinylene] (or MEH-PPV), and the LC solvent is 5CB. The electric field induces a change in the LC director orientation from a planar alignment (no electric field) to a perpendicular (homeotropic) alignment with an applied field of 5.5 x 103 V/cm. We find that the polymer chains align with the LC director in both planar and homeotropic alignment when measured in the bulk of the LC solution away from the device interface. Single molecule polarization distributions measured as a function of distance from the LC device interface reveal a continuous change of the MEH-PPV alignment from planar to homeotropic. The observed polarization distributions are modeled using a conventional elastic model that predicts the depth profile of the LC director orientation for the applied electric field. The excellent agreement between experiment and simulations shows that the alignment of MEH-PPV follows the LC director throughout the LC sample. Furthermore, our results suggest that conjugated polymers such as MEH-PPV can be used as sensitive local probes to explore complex (and unknown) structures in anisotropic media.     

Liquid crystal orientation by holographic phase gratings recorded on photosensitive Langmuir-Blodgett films

Holographic gratings were recorded on photosensitive Langmuir-Blodgett films characterized by UV spectroscopy, birefringence measurements and atomic force microscopy. Different polarizations of Ar laser writing beams create particular patterns of chromophore orientation in the diffraction spots. The gratings were shown to orient a nematic liquid crystal with the director parallel to the axes of the chromophores predetermined by film irradiation. In the case of the sp grating (recorded with laser beams polarized perpendicular to each other), two equivalent easy directions for the liquid crystal orientations at 90degree with respect to each other were observed; that is a quasi-bistable anchoring interface had been prepared. Measurements of the pretilt angles theta1s and anchoring energy Ws of 5CB on different holographic gratings show that this orientation technique is very promising for display technology.     

Direct observation of liquid crystal phases under nanoconfinement: A grazing incidence X-ray diffraction study

We have controlled the molecular orientation of nematic and smectic A liquid crystal (LC) phases in a porous anodic aluminium oxide (AAO) film, in which the pore diameter was varied from 20 nm to 100 nm. Surface anchoring to induce planar and homeotropic molecular arrangement was controlled by chemical modification of the AAO inner surface. Direct observation of the molecular orientation of LC phases was performed using grazing incidence X-ray diffraction technique, showing in-plane and out-of-plane molecular orientation, and the corresponding layer orientation. The systematic investigation of LC phases under nanoconfinement will be useful to design various kinds of physicochemical environments to control the orientation of other soft matters.     

Preparation of Oriented Liquid‐Crystalline/Isotropic Block Copolymer Films with Parallel or Perpendicular Arrangement of Smectic Layers and Lamellar Microdomains

Films of a symmetric liquid‐crystalline/isotropic block copolymer consisting of a smectic LC side‐chain polymer and polystyrene were prepared by solvent casting from solution and from the isotropic melt. By annealing the solvent‐cast film in the S_A phase an oriented microphase‐separated film of lamellar morphology was obtained in which both the lamellae of the block copolymer and the smectic layers of the LC block were oriented parallel to the film surface. A lamellar morphology with perpendicular orientation of lamellae and smectic layers was generated by cooling the block copolymer from the melt.