Difference of Electron Capture and Transfer Dissociation Mass Spectrometry on Ni<Superscript>2+</Superscript>-, Cu<Superscript>2+</Superscript>-, and Zn<Superscript>2+</Superscript>-Polyhistidine Complexes in the Absence of Remote Protons

Electron capture dissociation (ECD) and electron transfer dissociation (ETD) in metal-peptide complexes are dependent on the metal cation in the complex. The divalent transition metals Ni²⁺, Cu²⁺, and Zn²⁺ were used as charge carriers to produce metal-polyhistidine complexes in the absence of remote protons, since these metal cations strongly bind to neutral histidine residues in peptides. In the case of the ECD and ETD of Cu²⁺-polyhistidine complexes, the metal cation in the complex was reduced and the recombination energy was redistributed throughout the peptide to lead a zwitterionic peptide form having a protonated histidine residue and a deprotonated amide nitrogen. The zwitterion then underwent peptide bond cleavage, producing a and b fragment ions. In contrast, ECD and ETD induced different fragmentation processes in Zn²⁺-polyhistidine complexes. Although the N–C_α bond in the Zn²⁺-polyhistidine complex was cleaved by ETD, ECD of Zn²⁺-polyhistidine induced peptide bond cleavage accompanied with hydrogen atom release. The different fragmentation modes by ECD and ETD originated from the different electronic states of the charge-reduced complexes resulting from these processes. The details of the fragmentation processes were investigated by density functional theory.

Open image in new window

Graphical Abstract ?

     

A Database of Alkaline-Earth-Coordinated Peptide Cross Sections: Insight into General Aspects of Structure

A database of 1470 collision cross sections (666 doubly- and 804 triply-charged) of alkaline-earth-coordinated tryptic peptide ions [where the cation (M²⁺) correspond to Mg²⁺, Ca²⁺, or Ba²⁺] is presented. The utility of such an extensive set of measurements is illustrated by extraction of general properties of M²⁺-coordinated peptide structures. Specifically, we derive sets of intrinsic size parameters (ISPs) for individual amino acid residues for M²⁺-coordinated peptides. Comparison of these parameters with existing ISPs for protonated peptides suggests that M²⁺ binding occurs primarily through interactions with specific polar aliphatic residues (Asp, Ser, and Thr) and the peptide backbone. A comparison of binding interactions for these alkaline-earth metals with interactions reported previously for alkali metals is provided. Finally, we describe a new analysis in which ISPs are used as probes for assessing peptide structure based on amino acid composition.      

Formation of Peptide Radical Cations (M<Superscript>+·</Superscript>) in Electron Capture Dissociation of Peptides Adducted with Group IIB Metal Ions

Peptides adducted with different divalent Group IIB metal ions (Zn²⁺, Cd²⁺, and Hg²⁺) were found to give very different ECD mass spectra. ECD of Zn²⁺ adducted peptides gave series of c-/z-type fragment ions with and without metal ions. ECD of Cd²⁺ and Hg²⁺ adducted model peptides gave mostly a-type fragment ions with M^+• and fragment ions corresponding to losses of neutral side chain from M^+•. No detectable a-ions could be observed in ECD spectra of Zn²⁺ adducted peptides. We rationalized the present findings by invoking both proton-electron recombination and metal-ion reduction processes. As previously postulated, divalent metal-ions adducted peptides could adopt several forms, including (a) [M + Cat]²⁺, (b) [(M + Cat – H) + H]²⁺, and (c) [(M + Cat – 2H) + 2H]²⁺. The relative population of these precursor ions depends largely on the acidity of the metal–ion peptide complexes. Peptides adducted with divalent metal-ions of small ionic radii (i.e., Zn²⁺) would form predominantly species (b) and (c); whereas peptides adducted with metal ions of larger ionic radii (i.e., Hg²⁺) would adopt predominantly species (a). Species (b) and (c) are believed to be essential for proton-electron recombination process to give c-/z-type fragments via the labile ketylamino radical intermediates. Species (c) is particularly important for the formation of non-metalated c-/z-type fragments. Without any mobile protons, species (a) are believed to undergo metal ion reduction and subsequently induce spontaneous electron transfer from the peptide moiety to the charge-reduced metal ions. Depending on the exothermicity of the electron transfer reaction, the peptide radical cations might be formed with substantial internal energy and might undergo further dissociation to give structural related fragment ions.     

The Effects of Trivalent Lanthanide Cationization on the Electron Transfer Dissociation of Acidic Fibrinopeptide B and its Analogs

Electrospray ionization (ESI) on mixtures of acidic fibrinopeptide B and two peptide analogs with trivalent lanthanide salts generates [M + Met + H]⁴⁺, [M + Met]³⁺, and [M + Met –H]²⁺, where M = peptide and Met = metal (except radioactive promethium). These ions undergo extensive and highly efficient electron transfer dissociation (ETD) to form metallated and non-metallated c- and z-ions. All metal adducted product ions contain at least two acidic sites, which suggest attachment of the lanthanide cation at the side chains of one or more acidic residues. The three peptides undergo similar fragmentation. ETD on [M + Met + H]⁴⁺ leads to cleavage at every residue; the presence of both a metal ion and an extra proton is very effective in promoting sequence-informative fragmentation. Backbone dissociation of [M + Met]³⁺ is also extensive, although cleavage does not always occur between adjacent glutamic acid residues. For [M + Met – H ]²⁺, a more limited range of product ions form. All lanthanide metal peptide complexes display similar fragmentation except for europium (Eu). ETD on [M + Eu – H]²⁺ and [M + Eu]³⁺ yields a limited amount of peptide backbone cleavage; however, [M + Eu + H]⁴⁺ dissociates extensively with cleavage at every residue. With the exception of the results for Eu(III), metallated peptide ion formation by ESI, ETD fragmentation efficiencies, and product ion formation are unaffected by the identity of the lanthanide cation. Adduction with trivalent lanthanide metal ions is a promising tool for sequence analysis of acidic peptides by ETD.

Open image in new window

Graphical Abstract ?

     

Loss of Internal Backbone Carbonyls: Additional Evidence for Sequence-Scrambling in Collision-Induced Dissociation of y-Type Ions

It is shown that y-type ions, after losing C-terminal H₂O or NH₃, can lose an internal backbone carbonyl (CO) from different peptide positions and yield structurally different product fragment ions upon collision-induced dissociation (CID). Such CO losses from internal peptide backbones of y-fragment ions are not unique to a single peptide and were observed in four of five model peptides studied herein. Experimental details on examples of CO losses from y-type fragment ions for an isotopically labeled AAAAHAA-NH₂ heptapeptide and des-acetylated-α-melanocyte-stimulating hormone (dα-MSH) (SYSMEHFRWGKPV-NH₂) are reported. Results from isotope labeling, tandem mass spectrometry (MSⁿ), and ion mobility-mass spectrometry (IM-MS) confirm that CO losses from different amino acids of m/z-isolated y-type ions yield structurally different ions. It is shown that losses of internal backbone carbonyls (as CID products of m/z-isolated y-type ions) are among intermediate steps towards formation of rearranged or permutated product fragment ions. Possible mechanisms for generation of the observed sequence-scrambled a-“like” ions, as intermediates in sequence-scrambling pathways of y-type ions, are proposed and discussed. ?      

Efficient Covalent Bond Formation in Gas-Phase Peptide–Peptide Ion Complexes with the Photoleucine Stapler

Noncovalent complexes of hydrophobic peptides GLLLG and GLLLK with photoleucine (L*) tagged peptides G(L* _n L _m )K (n = 1,3, m = 2,0) were generated as singly charged ions in the gas phase and probed by photodissociation at 355 nm. Carbene intermediates produced by photodissociative loss of N₂ from the L* diazirine rings underwent insertion into X?H bonds of the target peptide moiety, forming covalent adducts with yields reaching 30%. Gas-phase sequencing of the covalent adducts revealed preferred bond formation at the C-terminal residue of the target peptide. Site-selective carbene insertion was achieved by placing the L* residue in different positions along the photopeptide chain, and the residues in the target peptide undergoing carbene insertion were identified by gas-phase ion sequencing that was aided by specific ¹³C labeling. Density functional theory calculations indicated that noncovalent binding to GL*L*L*K resulted in substantial changes of the (GLLLK + H)⁺ ground state conformation. The peptide moieties in [GL*L*LK + GLLLK + H]⁺ ion complexes were held together by hydrogen bonds, whereas dispersion interactions of the nonpolar groups were only secondary in ground-state 0 K structures. Born-Oppenheimer molecular dynamics for 100 ps trajectories of several different conformers at the 310 K laboratory temperature showed that noncovalent complexes developed multiple, residue-specific contacts between the diazirine carbons and GLLLK residues. The calculations pointed to the substantial fluidity of the nonpolar side chains in the complexes. Diazirine photochemistry in combination with Born-Oppenheimer molecular dynamics is a promising tool for investigations of peptide–peptide ion interactions in the gas phase.

Open image in new window

Graphical Abstract ?

     

Locating Pb2+ and Zn2+ in Zinc Finger-Like Peptides Using Mass Spectrometry

The binding preferences of Pb²⁺and Zn²⁺ in doubly charged complexes with zinc finger-like 12-residue peptides (Pep), [M_n(Pep-2(n-1)H)]²⁺ have been explored using tandem mass spectrometry. The peptides were synthesized strategically by blocking the N-terminus with an acetyl group and with four cysteine and/or histidine residues in positions 2, 5, 8, and 11, arranged in different motifs: CCHH, CHCH, and CCCC. The MS² spectra of the Pb²⁺ and Zn²⁺ complexes show multiple losses of water and a single methane loss and these provide a sensitive method for locating the metal dication and so elucidating its coordination. The elimination of a methane molecule indicated the position of the metal at the Cys2 residue. Whereas lead was observed to preferentially bind to cysteine residues, zinc was found to primarily bind to histidine residues and secondarily to cysteine residues. Preferential binding of lead to cysteine is preserved in the complexes with more than one Pb²⁺. Key to the mechanism of the loss of water and methane is the metal dication withdrawing electrons from the proximal amidic nitrogen. This acidic nitrogen loses its hydrogen to an amidic oxygen situated four atoms away leading to formation of a five-member ring and the elimination of water.      

Effects of Metal Ion Adduction on the Gas-Phase Conformations of Protein Ions

Changes in protein ion conformation as a result of nonspecific adduction of metal ions to the protein during electrospray ionization (ESI) from aqueous solutions were investigated using traveling wave ion mobility spectrometry (TWIMS). For all proteins examined, protein cations (and in most cases anions) with nonspecific metal ion adducts are more compact than the fully protonated (or deprotonated) ions with the same charge state. Compaction of protein cations upon nonspecific metal ion binding is most significant for intermediate charge state ions, and there is a greater reduction in collisional cross section with increasing number of metal ion adducts and increasing ion valency, consistent with an electrostatic interaction between the ions and the protein. Protein cations with the greatest number of adducted metal ions are no more compact than the lowest protonated ions formed from aqueous solutions. These results show that smaller collisional cross sections for metal-attached protein ions are not a good indicator of a specific metal–protein interaction in solution because nonspecific metal ion adduction also results in smaller gaseous protein cation cross sections. In contrast, the collisional cross section of α-lactalbumin, which specifically binds one Ca²⁺, is larger for the holo-form compared with the apo-form, in agreement with solution-phase measurements. Because compaction of protein cations occurs when metal ion adduction is nonspecific, elongation of a protein cation may be a more reliable indicator that a specific metal ion–protein interaction occurs in solution.      

Structural Investigation of the Hormone Melatonin and Its Alkali and Alkaline Earth Metal Complexes in the Gas Phase

Gas phase infrared dissociation spectra of the radical cation, deprotonated and protonated forms of the hormone melatonin, and its complexes with alkali (Li⁺, Na⁺, and K⁺) and alkaline earth metal ions (Mg²⁺, Ca²⁺, and Sr²⁺) are measured in the spectral range 800–1800 cm^?1. Minimum energy geometries calculated at the B3LYP/LACVP++** level are used to assign structural motifs to absorption bands in the experimental spectra. The melatonin anion is deprotonated at the indole-N. The indole-C linking the amide chain is the most favored protonation site. Comparisons between the experimental and calculated spectra for alkali and alkaline earth metal ion complexes reveal that the metal ions interact similarly with the amide and methoxy oxygen atoms. The amide I band undergoes a red shift with increasing charge density of the metal ion and the amide II band shows a concomitant blue shift. Another binding motif in which the metal ions interact with the amide-O and the π-electron cloud of the aromatic group is identified but is higher in energy by at least 18 kJ/mol. Melatonin is deprotonated at the amide-N with Mg²⁺ and the metal ion coordinates to the amide-N and an indole-C or the methoxy-O. These results provide information about the intrinsic binding of metal ions to melatonin and combined with future studies on solvated melatonin-metal ion complexes may help elucidate the solvent effects on metal ion binding in solution and the biochemistry of melatonin. These results also serve as benchmarks for future theoretical studies on melatonin-metal ion interactions.

Open image in new window

Graphical Abstract ?

     

Influence of Metal–Peptide Complexation on Fragmentation and Inter-Fragment Hydrogen Migration in Electron Transfer Dissociation

The use of metal salts in electrospray ionization (ESI) of peptides increases the charge state of peptide ions, facilitating electron transfer dissociation (ETD) in tandem mass spectrometry. In the present study, K⁺ and Ca²⁺ were used as charge carriers to form multiply-charged metal–peptide complexes. ETD of the potassium- or calcium-peptide complex was initiated by transfer of an electron to a proton remote from the metal cation, and a c'-z? fragment complex, in which the c' and z? fragments were linked together via a metal cation coordinating with several amino acid residues, was formed. The presence of a metal cation in the precursor for ETD increased the lifetime of the c'-z? fragment complex, eventually generating c? and z' fragments through inter-fragment hydrogen migration. The degree of hydrogen migration was dependent on the location of the metal cation in the metal-peptide complex, but was not reconciled with conformation of the precursor ion obtained by molecular mechanics simulation. In contrast, the location of the metal cation in the intermediate suggested by the ETD spectrum was in agreement with the conformation of “proton-removed” precursors, indicating that the charge reduction of precursor ions by ETD induces conformational rearrangement during the fragmentation process.

Where Does the Electron Go? Stable and Metastable Peptide Cation Radicals Formed by Electron Transfer

Electron transfer to doubly and triply charged heptapeptide ions containing polar residues Arg, Lys, and Asp in combination with nonpolar Gly, Ala, and Pro or Leu generates stable and metastable charge-reduced ions, (M + 2H)^+●, in addition to standard electron-transfer dissociation (ETD) fragment ions. The metastable (M + 2H)^+● ions spontaneously dissociate upon resonant ejection from the linear ion trap, giving irregularly shaped peaks with offset m/z values. The fractions of stable and metastable (M + 2H)^+● ions and their mass shifts depend on the presence of Pro-4 and Leu-4 residues in the peptides, with the Pro-4 sequences giving larger fractions of the stable ions while showing smaller mass shifts for the metastables. Conversion of the Asp and C-terminal carboxyl groups to methyl esters further lowers the charge-reduced ion stability. Collisional activation and photodissociation at 355 nm of mass-selected (M + 2H)^+● results in different dissociations that give sequence specific MS³ spectra. With a single exception of charge-reduced (LKGLADR + 2H)^+●, the MS³ spectra do not produce ETD sequence fragments of the c and z type. Hence, these (M + 2H)^+● ions are covalent radicals, not ion–molecule complexes, undergoing dramatically different dissociations in the ground and excited electronic states. The increased stability of the Pro-4 containing (M + 2H)^+● ions is attributed to radicals formed by opening of the Pro ring and undergoing further stabilization by hydrogen atom migrations. UV–VIS photodissociation action spectroscopy and time-dependent density functional theory calculations are used in a case in point study of the stable (LKGPADR + 2H)^+● ion produced by ETD. In contrast to singly-reduced peptide ions, doubly reduced (M + 3H)⁺ ions are stable only when formed from the Pro-4 precursors and show all characteristics of even electron ions regarding no photon absorption at 355 nm or ion-molecule reactions, and exhibiting proton driven collision induced dissociations.

Open image in new window

Graphical Abstract ?

     

Gas-Phase Structure of Amyloid-β (12 – 28) Peptide Investigated by Infrared Spectroscopy, Electron Capture Dissociation and Ion Mobility Mass Spectrometry

The gas-phase structures of doubly and triply protonated Amyloid-β_12-28 peptides have been investigated through the combination of ion mobility (IM), electron capture dissociation (ECD) mass spectrometry, and infrared multi-photon dissociation (IRMPD) spectroscopy together with theoretical modeling. Replica-exchange molecular dynamics simulations were conducted to explore the conformational space of these protonated peptides, from which several classes of structures were found. Among the low-lying conformers, those with predicted diffusion cross-sections consistent with the ion mobility experiment were further selected and their IR spectra simulated using a hybrid quantum mechanical/semiempirical method at the ONIOM DFT/B3LYP/6-31 g(d)/AM1 level. In ECD mass spectrometry, the c/z product ion abundance (PIA) has been analyzed for the two charge states and revealed drastic differences. For the doubly protonated species, N – C_α bond cleavage occurs only on the N and C terminal parts, while a periodic distribution of PIA is clearly observed for the triply charged peptides. These PIA distributions have been rationalized by comparison with the inverse of the distances from the protonated sites to the carbonyl oxygens for the conformations suggested from IR and IM experiments. Structural assignment for the amyloid peptide is then made possible by the combination of these three experimental techniques that provide complementary information on the possible secondary structure adopted by peptides. Although globular conformations are favored for the doubly protonated peptide, incrementing the charge state leads to a conformational transition towards extended structures with 3₁₀- and α-helix motifs.      

Sulfur Pentafluoride is a Preferred Reagent Cation for Negative Electron Transfer Dissociation

Negative mode proteome analysis offers access to unique portions of the proteome and several acidic post-translational modifications; however, traditional collision-based fragmentation methods fail to reliably provide sequence information for peptide anions. Negative electron transfer dissociation (NETD), on the other hand, can sequence precursor anions in a high-throughput manner. Similar to other ion–ion methods, NETD is most efficient with peptides of higher charge state because of the increased electrostatic interaction between reacting molecules. Here we demonstrate that NETD performance for lower charge state precursors can be improved by altering the reagent cation. Specifically, the recombination energy of the NETD reaction—largely dictated by the ionization energy (IE) of the reagent cation—can affect the extent of fragmentation. We compare the NETD reagent cations of C₁₆H₁₀ ^●+ (IE?=?7.9 eV) and SF₅ ^●+ (IE?=?9.6 eV) on a set of standard peptides, concluding that SF₅ ^●+ yields greater sequence ion generation. Subsequent proteome-scale nLC-MS/MS experiments comparing C₁₆H₁₀ ^●+ and SF₅ ^●+ further supported this outcome: analyses using SF₅ ^●+ yielded 4637 peptide spectral matches (PSMs) and 2900 unique peptides, whereas C₁₆H₁₀ ^●+ produced 3563 PSMs and 2231 peptides. The substantive gain in identification power with SF₅ ^●+ was largely driven by improved identification of doubly deprotonated precursors, indicating that increased NETD recombination energy can increase product ion yield for low charge density precursors. This work demonstrates that SF₅ ^●+ is a viable, if not favorable, reagent cation for NETD, and provides improved fragmentation over the commonly used fluoranthene reagent.

Open image in new window

Graphical Abstract ?

     

Mapping Protein–Ligand Interactions in the Gas Phase Using a Functional Group Replacement Strategy. Comparison of CID and BIRD Activation Methods

Intermolecular interactions in the gaseous ions of two protein–ligand complexes, a single chain antibody (scFv) and its trisaccharide ligand (α-D-Galp-(1→2)-[α-D-Abep-(1→3)]-α-Manp-OCH_3, L1) and streptavidin homotetramer (S₄) and biotin (B), were investigated using a collision-induced dissociation (CID)-functional group replacement (FGR) strategy. CID was performed on protonated ions of a series of structurally related complexes based on the (scFv + L1) and (S₄?+?4B) complexes, at the +10 and +13 charge states, respectively. Intermolecular interactions were identified from decreases in the collision energy required to dissociate 50 % of the reactant ion (Ec₅₀) upon modification of protein residues or ligand functional groups. For the (scFv + L1)¹⁰⁺ ion, it was found that deoxygenation of L1 (at Gal C3 and C6 and Man C4 and C6) or mutation of His101 (to Ala) resulted in a decrease in Ec₅₀ values. These results suggest that the four hydroxyl groups and His101 participate in intermolecular H-bonds. These findings agree with those obtained using the blackbody infrared radiative dissociation (BIRD)-FGR method. However, the CID-FGR method failed to reveal the relative strengths of the intermolecular interactions or establish Man C4 OH and His101 as an H-bond donor/acceptor pair. The CID-FGR method correctly identified Tyr43, but not Ser27, Trp79, and Trp120, as a stabilizing contact in the (S₄?+?4B)¹³⁺ ion. In fact, mutation of Trp79 and Trp120 led to an increase in the Ec₅₀ value. Taken together, these results suggest that the CID-FGR method, as implemented here, does not represent a reliable approach for identifying interactions in the gaseous protein–ligand complexes.      

Transition Metal Ions: Charge Carriers that Mediate the Electron Capture Dissociation Pathways of Peptides

Electron capture dissociation (ECD) of model peptides adducted with first row divalent transition metal ions, including Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺, were investigated. Model peptides with general sequence of ZGGGXGGGZ were used as probes to unveil the ECD mechanism of metalated peptides, where X is either V or W; and Z is either R or N. Peptides metalated with different divalent transition metal ions were found to generate different ECD tandem mass spectra. ECD spectra of peptides metalated by Mn²⁺ and Zn²⁺ were similar to those generated by ECD of peptides adducted with alkaline earth metal ions. Series of c-/z-type fragment ions with and without metal ions were observed. ECD of Fe²⁺, Co²⁺, and Ni²⁺ adducted peptides yielded abundant metalated a-/y-type fragment ions; whereas ECD of Cu²⁺ adducted peptides generated predominantly metalated b-/y-type fragment ions. From the present experimental results, it was postulated that electronic configuration of metal ions is an important factor in determining the ECD behavior of the metalated peptides. Due presumably to the stability of the electronic configuration, metal ions with fully-filled (i.e., Zn²⁺) and half filled (i.e., Mn²⁺) d-orbitals might not capture the incoming electron. Dissociation of the metal ions adducted peptides would proceed through the usual ECD channel(s) via “hot-hydrogen” or “superbase” intermediates, to form series of c-/z ^•- fragments. For other transition metal ions studied, reduction of the metal ions might occur preferentially. The energy liberated by the metal ion reduction would provide enough internal energy to generate the “slow-heating” type of fragment ions, i.e., metalated a-/y- fragments and metalated b-/y- fragments.     

Charge Site Mass Spectra: Conformation-Sensitive Components of the Electron Capture Dissociation Spectrum of a Protein

A conventional electron capture dissociation (ECD) spectrum of a protein is uniquely characteristic of the first dimension of its linear structure. This sequence information is indicated by summing the primary c ^m+ and z ^m+? products of cleavage at each of its molecular ion’s inter-residue bonds. For example, the ECD spectra of ubiquitin (M?+?nH)ⁿ⁺ ions, n?=?7–13, provide sequence characterization of 72 of its 75 cleavage sites from 1843 ions in seven c ^(1–7)+ and eight z ^(1–8)+? spectra and their respective complements. Now we find that each of these c/z spectra is itself composed of “charge site (CS)” spectra, the c ^m+ or z ^m+? products of electron capture at a specific protonated basic residue. This charge site has been H-bonded to multiple other residues, producing multiple precursor ion forms; ECD at these residues yields the multiple products of that CS spectrum. Closely similar CS spectra are often formed from a range of charge states of ubiquitin and KIX ions; this indicates a common secondary conformation, but not the conventional α-helicity postulated previously. CS spectra should provide new capabilities for comparing regional conformations of gaseous protein ions and delineating ECD fragmentation pathways.

Gas-Phase Reactivity of Peptide Thiyl (RS•), Perthiyl (RSS•), and Sulfinyl (RSO•) Radical Ions Formed from Atmospheric Pressure Ion/Radical Reactions

In this study, we demonstrated the formation of gas-phase peptide perthiyl (RSS?) and thiyl (RS?) radical ions besides sulfinyl radical (RSO?) ions from atmospheric pressure (AP) ion/radical reactions of peptides containing inter-chain disulfide bonds. The identity of perthiyl radical was verified from characteristic 65 Da (?SSH) loss in collision-induced dissociation (CID). This signature loss was further used to assess the purity of peptide perthiyl radical ions formed from AP ion/radical reactions. Ion/molecule reactions combined with CID were carried out to confirm the formation of thiyl radical. Transmission mode ion/molecule reactions in collision cell (q2) were developed as a fast means to estimate the population of peptide thiyl radical ions. The reactivity of peptide thiyl, perthiyl, and sulfinyl radical ions was evaluated based on ion/molecule reactions toward organic disulfides, allyl iodide, organic thiol, and oxygen, which followed in order of thiyl (RS?) > perthiyl (RSS?) > sulfinyl (RSO?). The gas-phase reactivity of these three types of sulfur-based radicals is consistent with literature reports from solution studies.      

Reagent Cluster Anions for Multiple Gas-Phase Covalent Modifications of Peptide and Protein Cations

Multiple gas phase ion/ion covalent modifications of peptide and protein ions are demonstrated using cluster-type reagent anions of N-hydroxysulfosuccinimide acetate (sulfo-NHS acetate) and 2-formyl-benzenesulfonic acid (FBMSA). These reagents are used to selectively modify unprotonated primary amine functionalities of peptides and proteins. Multiple reactive reagent molecules can be present in a single cluster ion, which allows for multiple covalent modifications to be achieved in a single ion/ion encounter and at the ‘cost’ of only a single analyte charge. Multiple derivatizations are demonstrated when the number of available reactive sites on the analyte cation exceeds the number of reagent molecules in the anionic cluster (e.g., data shown here for reactions between the polypeptide [K₁₀ + 3H]³⁺ and the reagent cluster [5R_5Na – Na]^–). This type of gas-phase ion chemistry is also applicable to whole protein ions. Here, ubiquitin was successfully modified using an FBMSA cluster anion which, upon collisional activation, produced fragment ions with various numbers of modifications. Data for the pentamer cluster are included as illustrative of the results obtained for the clusters comprised of two to six reagent molecules.

Cis→Trans Isomerization of Pro<Superscript>7</Superscript> in Oxytocin Regulates Zn<Superscript>2+</Superscript> Binding

Ion mobility/mass spectrometry techniques are employed to investigate the binding of Zn²⁺ to the nine-residue peptide hormone oxytocin (OT, Cys¹-Tyr²-Ile³-Gln⁴-Asn⁵-Cys⁶-Pro⁷-Leu⁸-Gly⁹-NH₂, having a disulfide bond between Cys¹ and Cys⁶ residues). Zn²⁺ binding to OT is known to increase the affinity of OT for its receptor [Pearlmutter, A. F., Soloff, M. S.: Characterization of the metal ion requirement for oxytocin-receptor interaction in rat mammary gland membranes. J. Biol. Chem. 254, 3899–3906 (1979)]. In the absence of Zn²⁺, we find evidence for two primary OT conformations, which arise because the Cys⁶–Pro⁷ peptide bond exists in both the trans- and cis-configurations. Upon addition of Zn²⁺, we determine binding constants in water of K_A = 1.43 ± 0.24 and 0.42 ± 0.12 μM^?1, for the trans- and cis-configured populations, respectively. The Zn²⁺ bound form of OT, having a cross section of Ω = 235 Ų, has Pro⁷ in the trans-configuration, which agrees with a prior report [Wyttenbach, T., Liu, D., Bowers, M. T.: Interactions of the hormone oxytocin with divalent metal ions. J. Am. Chem. Soc. 130, 5993–6000 (2008)], in which it was proposed that Zn²⁺ binds to the peptide ring and is further coordinated by interaction of the C-terminal, Pro⁷-Leu⁸-Gly⁹-NH₂, tail. The present work shows that the cis-configuration of OT isomerizes to the trans-configuration upon binding Zn²⁺. In this way, the proline residue regulates Zn²⁺ binding to OT and, hence, is important in receptor binding.

Open image in new window

Graphical Abstract ?

     

Systematic Temperature Effects in the Argon Cluster Ion Sputter Depth Profiling of Organic Materials Using Secondary Ion Mass Spectrometry

A study is presented of the effects of sample temperature on the sputter depth profiling of two organic materials, NPB (N,N′-Di(1-naphthyl)-N,N′-diphenyl-(1,1′-biphenyl)-4,4′-diamine) and Irganox 1010, using a 5 keV Ar₂₀₀₀ ⁺ cluster ion beam and analysis by secondary ion mass spectrometry. It is shown that at low temperatures, the yields increase slowly with temperature in accordance with the Universal Sputtering Yield equation where the energy term is now modified by Trouton’s rule. This occurs up to a transition temperature, T _T, which is, in turn, approximately 0.8T _M, where T _M is the sample melting temperature in Kelvin. For NPB and Irganox 1010, these transition temperatures are close to 15 °C and 0 °C, respectively. Above this temperature, the rate of increase of the sputtering yield rises by an order of magnitude. During sputtering, the depth resolution also changes with temperature with a very small change occurring below T _T. At higher temperatures, the depth resolution improves but then rapidly degrades, possibly as a result first of local crater surface diffusion and then of bulk inter-diffusion. The secondary ion spectra also change with temperature with the intensities of the molecular entities increasing least. This agrees with a model in which the molecular entities arise near the crater rim. It is recommended that for consistent results, measurements for organic materials are always made at temperatures significantly below T _T or 0.8 T _M, and this is generally below room temperature.

Open image in new window

Graphical Abstract ?