Isomorphous Substitution of Aluminium for Gallium in a Framework Gallophosphate

An aluminium-substituted framework gallophosphate with occluded triethylamine was synthesized hydrothermally. 27Al MAS NMR spectroscopy indicates that only the tetrahedral coordinated gallium atoms in the gallophosphate are substituted by aluminium atoms. The substitution leads to an evident decrease in cell volume of the crystal. The differences between the original gallophosphate and the aluminium-substituted one are also found for the IR spectrum and the thermal property.     

Rapid and Sensitive LC-MS/MS Method for Quantification of Fexofenadine in Human Plasma——Application to a Bioequivalence Study in Chinese Volunteers

A rapid and sensitive liquid chromatography-tandem mass spectrometry method（LC-MS/MS）was developed and validated for the quantification of fexofenadine in human plasma,to conduct comparative bioavailability studies.Human plasma was extracted with a mixture of dichloromethane-diethyl ether（volume ratio 2∶3）in a basic environment and the extract was separated on a C18 column with a mobile phase consisting of acetonitrile-methanol-10 mmol/L ammonium acetate（volume ratio 45∶45∶10）.The analytes were detected via electrospray ionization（ESI）tandem mass spectrometry in the multiple-reaction-monitoring（MRM）mode.The linearity was within a range of 1-1000 ng/mL.The intra-and inter-day precision were〈4.1% and〈4.8%,respectively,and the accuracy was in the range of 95.0%-105%.The method was applied to the quantification of fexofenadine human plasma from 20 healthy male Chinese volunteers,according to a single dose,randomized,two-way crossover design with a two-week washout period.The mean values of major pharmacokinetic parameters of ρmax,AUC0-48,AUC0-∞,tmax,and t1/2 were determined from the plasma concentration.The analysis of variance（ANOVA）did not show any significant difference between the two products of fexofenadine and 90% confidence intervals fell within the acceptable range for bioequivalence.     

Cannabidiol Discovery and Synthesis—a Target-Oriented Analysis in Drug Production Processes

The current state of evidence and recommendations for cannabidiol (CBD) and its health effects change the legal landscape and aim to destigmatize its phytotherapeutic research. Recently, some countries have included CBD as an antiepileptic product for compassionate use in children with refractory epilepsy. The growing demand for CBD has led to the need for high-purity cannabinoids on the emerging market. The discovery and development of approaches toward CBD synthesis have arisen from the successful extraction of Cannabis plants for cannabinoid fermentation in brewer's yeast. To understand different contributions to the design and enhancement of the synthesis of CBD and its key intermediates, a detailed analysis of the history behind cannabinoid compounds and their optimization is provided herein.     

A Rapid Method for Qualitative and Quantitative Analysis of Major Constituents in Dengzhanxixin Injection by LC-DAD-ESI–MSn

For the first time a rapid method for qualitative and quantitative analysis of constituents in Dengzhanxixin injection was established by liquid chromatography with electrospray ionization–tandem mass spectrometry. Eighteen compounds including flavonoids and phenolic acids were characterized or tentatively identified. Ten of these compounds, including 5-O-caffeoylquinic acid, caffeic acid, 1,3-O-dicaffeoylquinic acid, 6′-O-caffeoylerigeroside, scutellarin, 3,4-O-dicaffeoylquinic acid, 3,5-O-dicaffeoylquinic acid, erigoster B, apigenin-7-O-glucuronide and 4,5-O-dicaffeoylquinic acid, were further quantified as marker substances by LC-DAD using a C₁₈ column at 0.4 mL min^?1 within 37 min. The quantitative method was validated for ten interesting compounds, including linearity, accuracy, precisions, LOQ and LOD, which was proved to be sensitive, reproducible and accurate. The study might provide a comprehensive method for the quality assessment of dengzhanxixin injection.     

The Rapid Analysis of Antibiotics in Animal Meat and Egg Using a Novel SEP Method and UPLC–MS/MS

A simple and sensitive method for the determination of 39 antibiotics, including sulfonamides and quinolones, in pork, chicken, fish tissues and eggs, has been developed. The sample preparation included ultrasound-assisted extraction (UAE) with 0.1% formic acid in 90:10 acetonitrile/water (v:v) and a final clean-up with Oasis PRiME HLB, a new reversed phase SPE without traditional pre-equilibration and washing steps before eluting SPE. Analysis was performed by ultra-performance liquid chromatography coupled to tandem quadrupole mass spectrometry (UPLC–MS/MS). The positive ionization in multiple reaction monitoring mode (MRM) and product ion confirmation scan (PICs) were used in the method. The PICs provides additional confirmation for compound identification through acquisition of MS/MS spectra in the same injection and a means of verifying that the signal from the MRM peak is from the compound of interest. In particular, single test is simultaneously able to gain both quantitative MRM and qualitative full-scan MS/MS data without the need for long analysis times or repeat injection. All solvent and matrix-matched calibration curves showed excellent correlation coefficient >0.990, with the dynamic range 0.2–100 ng mL^?1. For over 90% of the analytes, the recoveries were between 60 and 120% in all matrices studied at three spiked levels of low, medium, and high concentrations, with the intra-day precision values in the range of 2.7–20.0% and the inter-day precision values in the range of 6.2–21.3%. The limits of detection (LODs) and limits of quantification (LOQs) of all drugs were 0.05–2.6 and 0.12–5.6 μg kg^?1, respectively. A weak matrix effect was observed for most of the compounds in four complex samples. The proposed method was proven very simple, fast, sensitive, and selective and has been successfully applied in real samples from local markets and farms.     

LC–MS–MS Analysis of Mirtazapine in Plasma, and Determination of Pharmacokinetic Data for Rats

A sensitive LC–MS–MS method with electrospray ionization has been developed for analysis of mirtazapine in rat plasma. After addition of diazepam as internal standard, liquid–liquid extraction was used to produce a protein-free extract. Chromatographic separation was achieved on a 150 × 4.6 mm, 5 μm particle, ODS column with 84:16 (v/v) methanol–water containing 0.1% ammonium acetate and 0.01% glacial acetic acid as mobile phase. LC–MS–MS was performed in selected-ion-monitoring (SIM) mode using target fragment ions m/z 195.09 for mirtazapine and m/z 192.80 for the IS. Calibration plots were linear over the range of 0.516–618.8 ng mL^?1. The lower limit of quantification was 0.516 ng mL^?1. Intra-day and inter-day precision were better than 12.6 and 8.8%, respectively. Mean recovery of mirtazapine from plasma was in the range 87.41–90.06%; average recovery was 88.40% (RSD 3.95%). Significant gender differences between mirtazapine pharmacokinetic data were observed in this study.     

StavroX—A Software for Analyzing Crosslinked Products in Protein Interaction Studies

Chemical crosslinking in combination with mass spectrometry has matured into an alternative approach to derive low-resolution structural information of proteins and protein complexes. Yet, one of the major drawbacks of this strategy remains the lack of software that is able to handle the large MS datasets that are created after chemical crosslinking and enzymatic digestion of the crosslinking reaction mixtures. Here, we describe a software, termed StavroX, which has been specifically designed for analyzing highly complex crosslinking datasets. The StavroX software was evaluated for three diverse biological systems: (1) the complex between calmodulin and a peptide derived from Munc13, (2) an N-terminal ß-laminin fragment, and (3) the complex between guanylyl cyclase activating protein-2 and a peptide derived from retinal guanylyl cyclase. We show that the StavroX software is advantageous for analyzing crosslinked products due to its easy-to-use graphical user interface and the highly automated analysis of mass spectrometry (MS) and tandem mass spectrometry (MS/MS) data resulting in short times for analysis. StavroX is expected to give a further push to the chemical crosslinking approach as a routine technique for protein interaction studies.     

Thermodynamic Analysis of the Geldanamycin–Hsp90 Interaction in a Whole Cell Lysate Using a Mass Spectrometry-Based Proteomics Approach

Geldanamycin is a natural product with well-established and potent anti-cancer activities. Heat shock protein 90 (Hsp90) is the known target of geldanamycin, which directly binds to Hsp90’s N-terminal ATP binding domain and inhibits Hsp90’s ATPase activity. The affinity of geldanamycin for Hsp90 has been measured in multiple studies. However, there have been large discrepancies between the reported dissociation constants (i.e., K_d values), which have ranged from low nanomolar to micromolar. Here the stability of proteins from rates of oxidation (SPROX) technique was used in combination with an isobaric mass tagging strategy to measure the binding affinity of geldanamycin to unpurified Hsp90 in an MCF-7 cell lysate. The K_d values determined here were dependent on how long geldanamycin was equilibrated with the lysate prior to SPROX analysis. The K_d values determined using equilibration times of 0.5 and 24 h were 1 and 0.03 μM, respectively. These K_d values, which are similar to those previously reported in a geldanamycin–Hsp90 binding study that involved the use of a fluorescently labeled geldanamycin analogue, establish that the slow-tight binding behavior previously observed for the fluorescently labeled geldanamycin analogue is not an artifact of the fluorescent label, but rather an inherent property of the geldanamycin–Hsp90 binding interaction. The slow-tight binding property of this complex may be related to time-dependent conformational changes in Hsp90 and/or to time-dependent chemical changes in geldanamycin, both of which have been previously proposed to explain the slow-tight binding behavior of the geldanamycin–Hsp90 complex.

Open image in new window

Graphical Abstract ?

     

Rapid and Sensitive LC–MS/MS Analysis of Fatty Acids in Clinical Samples

Free fatty acids (FFAs), major cellular metabolites, play an important role during tumor pathogenesis. Enhanced de novo fatty acid synthesis in tissues is a characteristic feature of cancer. Therefore, measurement of FFA concentration in biological samples is beneficial for cancer research and clinical diagnosis. Herein, a rapid, stable, and sensitive detection methodology was established to simultaneously quantify 22 FFAs using high-performance liquid chromatography/electrospray ionization tandem mass spectrometry (HPLC/ESI–MS/MS). The HPLC–MS/MS system was run in negative ion mode for 15 min using multiple reaction monitoring. The lipids were extracted from colon tissues of colon cancer patients and then injected into the HPLC–MS/MS system for analysis. Colon samples were analyzed by inter-day repeatability and intra-day repeatability, with less than 5 % deviation for most fatty acids. This approach is successful to determine low picogram concentrations of each FFA molecule using milligrams of tissue, and provides a promising method for FFA microanalysis in clinical samples.     

Rapid and Sensitive LC–MS/MS Analysis of Fatty Acids in Clinical Samples

Free fatty acids (FFAs), major cellular metabolites, play an important role during tumor pathogenesis. Enhanced de novo fatty acid synthesis in tissues is a characteristic feature of cancer. Therefore, measurement of FFA concentration in biological samples is beneficial for cancer research and clinical diagnosis. Herein, a rapid, stable, and sensitive detection methodology was established to simultaneously quantify 22 FFAs using high-performance liquid chromatography/electrospray ionization tandem mass spectrometry (HPLC/ESI–MS/MS). The HPLC–MS/MS system was run in negative ion mode for 15 min using multiple reaction monitoring. The lipids were extracted from colon tissues of colon cancer patients and then injected into the HPLC–MS/MS system for analysis. Colon samples were analyzed by inter-day repeatability and intra-day repeatability, with less than 5 % deviation for most fatty acids. This approach is successful to determine low picogram concentrations of each FFA molecule using milligrams of tissue, and provides a promising method for FFA microanalysis in clinical samples.

     

SPE and LC–ESI–MS for Quantitative Analysis of Mitiglinide in Human Plasma in a Bioequivalence Study

Liquid chromatography–electrospray ionization mass spectrometry has been used for rapid, selective, and sensitive quantitative analysis of mitiglinide in human plasma. Sample pretreatment involved solid-phase extraction from plasma with gliclazide as internal standard. Separation was performed on a C₁₈ column (150 × 2.0 mm) with 71:29 (v/v) acetonitrile–water (containing 0.1% formic acid and 0.2 mmol L^?1 ammonium acetate) as mobile phase at a flow rate of 0.2 mL min^?1. The method was validated then successfully applied to a clinical bioequivalence study of mitiglinide in 20 healthy volunteers after oral administration.     

A Rapid Sample Preparation Procedure Using MonoSpin CBA and Amide Columns for Tetrodotoxin Detection in Serum and Urine Using LC–MS/MS Analysis

Clinical diagnosis of tetrodotoxin (TTX) poisoning can be difficult because of the lack of characteristic morphological findings and a screening test, such as an immunoassay. Here, we present a fully validated method for the analysis of TTX in serum and urine. In this method, serum and urine samples were extracted using MonoSpin CBA or amide columns, followed by LC–MS/MS analysis. The TTX was eluted from the column by 0.1 mL of 10 % acetic acid solution, and was directly injected into LC–MS/MS. An Agilent 1200 HPLC system equipped with a HILIC separation column (Zorbax HILIC Plus 2.1 × 100 mm, 3.5 μm) was used for isocratic elution, with a mobile phase of 10 mM ammonium formate with formic acid (95:5, v/v), along with 5 mM trifluoroacetic acid and 2 % acetonitrile. TTX was detected with an Agilent 6410 mass spectrometer utilizing positive electrospray ionization and multiple reaction monitoring. Limits of quantification for serum and urine were established to be 1 and 0.5 ng mL^?1, respectively. Limits of detection for serum and urine were 0.5 and 0.25 ng mL^?1, respectively. Intra-day and inter-day precision varied from 1.5 to 8.5 %. The recovery was >86.5 % for both matrices. In this method, the sample preparation process prior to injection into the LC–MS/MS takes approximately 10–15 min, which reduces the extraction time to one-tenth of that of previous methods. The application of this method was further verified by analysis of biological materials from a patient suffering from puffer fish poisoning.     

Sample Preparation Techniques—An Important Part in Trace Element Analysis for Environmental Research and Monitoring

Abstract

For the determination of minute amounts of elements in environmental samples combined analytical procedures are frequently employed. The combination of suitable sample preparation techniques with adequate detection methods lead to powerful analytical procedures. Decomposition methods are an important part of combined procedures for the determination of trace elements in solid samples. After a short summary of the potential sources for systematic errors two new decomposition methods are described that are suitable for the ashing of organic environmental samples. In one method the organic sample is ashed in a high-frequency excited oxygen plasma. The second method is a high pressure decomposition that permits mineralization of the sample in sealed quartz vessels with nitric acid at temperatures up to 320°C.

For both methods the ratio of sample weight to decomposition reagents is comparatively high. This makes these methods in combination with adequate detection methods suitable for the determination of elements at very low concentrations.

X-ray fluorescence spectrometry combined with adequate preconcentration methods is very well suited for the simultaneous determination of trace elements. Following a critical evaluation of various preconcentration techniques the analytical characteristics of filter paper with immobilized complexing agents are described. Particular emphasis is given to filter papers with dithiocarbamates as chelating group.     

Nutraceutical Products—State-of-the-Art for Sample Preparation in Pesticide Residues Analysis

Nutraceutical products are plant-based materials primarily valued for their possible medicinal or therapeutic properties. According to their “natural” origin they are often perceived as being safe; however, for the prevention of economic losses, pesticides may be used against pest, mold and insects causing plant damage. Bearing in mind that a nutraceutical is a concentrated form of the plant, pesticides could be found in the final product in possibly worrying concentration. Nutraceutical products and dried herb materials typically represent very complex matrices for pesticide residue analysis, therefore a proper sample preparation protocol with appropriate clean-up steps is necessary prior to the analysis. Hence, this article gives an overview of pesticide residue analyses in nutraceuticals and provides the state of the art for sample preparation techniques applied for different types of nutraceuticals.     

Analysis of residuals — a useful tool for phase equilibrium data analysis

It is shown that analysis of the goodness of a fit using only the coefficient of determination R² or the mean average deviation is not enough and should be accompanied by a statistical study of the behavior of the residuals. This study should not be visual but using proper statistics. Different techniques such as normal probability plots, half-normal probability plots, detrended probability plots, rankits and Durbin–Watson are presented and illustrated with examples from the area of fluid behavior and fluid phase equilibrium.     

Simultaneous Multi-Wavelength UV-Visible Detection for HPLC Using a Diode-Array Spectrophotometer—A Versatile Software Package

Abstract

A BASIC program was developed to monitor absorbance simultaneously at various wavelengths using an HP8451A Diode Array Spectrophotometer linked to a HPLC system and equipped with a flow cell. The program measures a maximum of ten wavelengths and takes a maximum of 240 measurements for each wavelength, using only 16K of memory and a dual disc drive. The program includes the options of replotting using a different ordinate scale and saving the numerical data on disc.     

Integrated Theoretical and Empirical Studies for Probing Substrate–Framework Interactions in Hierarchical Catalysts

Soft templating with siliceous surfactant is an established protocol for the synthesis of hierarchically porous silicoaluminophosphates (HP SAPOs) with improved mass transport properties. Motivated by the enhanced performance of HP SAPOs in the Beckmann rearrangement of cyclohexanone oxime to the nylon 6 precursor ϵ-caprolactam, an integrated theoretical and empirical study was carried out to investigate the catalytic potential of the siliceous mesopore network. Inelastic neutron scattering (INS) studies, in particular, provided unique insight into the substrate-framework interactions in HP (Si)AlPOs and allowed reactive species to be studied independent of the catalyst matrix. The spectroscopic (INS, FTIR spectroscopy, MAS NMR spectroscopy) and computational analyses revealed that in the organosilane-templated SAPO, the interconnectivity of micro- and mesopores permits cooperativity between their respective silanol and Brønsted acid sites that facilitates the protonation of cyclohexanone oxime in a physical mixture at ambient temperature.     

Rapid and Sensitive UPLC-MS–MS for the Determination of Trimetazidine in Human Plasma

A specific and sensitive UPLC-MS–MS was developed for the determination of trimetazidine in human plasma. The sample preparation was based on a single-step liquid–liquid extraction with acetic ether. The chromatographic separation was on a C₁₈ analytical column (50 mm × 2.1 mm, 1.7 μm) with acetonitrile and 10 mM ammonium acetate (30:70, v/v) as the mobile phase, and a triple-quadrupole mass spectrometer equipped with an electrospray ionization source (ESI) applied for detection. The method was linear over the concentration ranges of 0.25–100.00 ng mL^?1 for trimetazidine, and the lower limit of quantification (LLOQ) was 0.25 ng mL^?1. The intra- and inter-day relative standard deviation (RSD) were less than 15% and the relative error (RE) were all within 15%. Finally, this method has been successfully applied to analyze plasma samples from a bioequivalence study with 18 volunteers.     

Rapid and Sensitive UPLC-MS–MS for the Determination of Trimetazidine in Human Plasma

A specific and sensitive UPLC-MS–MS was developed for the determination of trimetazidine in human plasma. The sample preparation was based on a single-step liquid–liquid extraction with acetic ether. The chromatographic separation was on a C₁₈ analytical column (50 mm × 2.1 mm, 1.7 μm) with acetonitrile and 10 mM ammonium acetate (30:70, v/v) as the mobile phase, and a triple-quadrupole mass spectrometer equipped with an electrospray ionization source (ESI) applied for detection. The method was linear over the concentration ranges of 0.25–100.00 ng mL⁻¹ for trimetazidine, and the lower limit of quantification (LLOQ) was 0.25 ng mL⁻¹. The intra- and inter-day relative standard deviation (RSD) were less than 15% and the relative error (RE) were all within 15%. Finally, this method has been successfully applied to analyze plasma samples from a bioequivalence study with 18 volunteers.