Extraction of palladium(II) from hydrochloric acid solutions by (RS)-1-(4-chlorophenyl)-4,4-dimethyl-3-(1H-1,2,4-triazol-1-ylmethyl)-pentan-3-ol

The extraction properties of (RS)-1-(4-chlorophenyl)-4,4-dimethyl-3-(1H-1,2,4-triazol-1-ylmethyl)-pentan-3-ol (with chloroform as a diluent) with respect to palladium(II) were studied. Palladium(II) was found to be efficiently extracted by the reagent from 0.1–6 M HCl solutions by the coordination mechanism. The rate of palladium(II) recovery depends on the hydrochloric acid and chloride ion concentrations in the aqueous phase. Conditions for the selective separation of palladium(II) and copper(II) from nickel(II), cobalt(II), and iron(III) were determined.     

Palladium(II) Extraction from Hydrochloric Acid Solutions with 4-[(Hexylsulfanyl)methyl]-3,5-Dimethyl-1H-Pyrazole

Palladium(II) extraction from hydrochloric acid solutions with a novel weakly basic complexing reagent, 4-[(hexylsulfanyl)methyl]-3,5-dimethyl-1H-pyrazole, dissolved in chloroform was studied. Palladium(II) was found to be highly efficiently extracted from 0.1–3 mol/L HCl solutions. A coordination mechanism of palladium(II) extraction with a protonated form of the reagent via fast interphase transfer of ion associates was proposed. The composition of the extracted compound, [PdCl₂μ-L]_n (n > 2), was found, and the way of coordination of the reagent to metal ions through N(2) nitrogen atom and thioether sulfur atom was determined. The reagent can be recommended for concentrating palladium(II) and selectively separating it from platinum(IV), copper(II), nickel(II), and iron(III).     

Palladium(II) extraction with 1-{[2-(2,4-Dichlorophenyl)-4-propyl-1,3-dioxolan-2-yl]-methyl}-1H-1,2,4-triazole from nitric acid solutions

Palladium(II) extraction from nitric acid solutions with 1-{[2-(2,4-dichlorophenyl)-4-propyl-1,3-dioxolan-2-yl]-methyl}-1H-1,2,4-triazole in toluene is studied. The reagent efficiently extracts palladium(II) from 0.2–6 M HNO₃ by a coordination mechanism yielding the complex Pd₂(NO₃)₄ S ₃ in the organic phase. The reagent can be used for selective separation of palladium(II) from nickel(II), copper(II), and iron(III) in the specified aqueous phase acidity range.     

Extraction of gallium(III) by 1-{[2-(2,4-dichlorophenyl)-4-propyl-1,3-dioxolan-2-yl]methyl}-1H-1,2,4-triazole from hydrochloric acid solutions

The extraction of gallium(III) with 1-{[2-(2,4-dichlorophenyl)-4-propyl-1,3-dioxolan-2- yl]methyl}-1H-1,2,4-triazole from hydrochloric acid solutions into toluene was studied. It was found that gallium( III) was efficiently extracted from 5–10 M solutions of HCl by the anion-exchange mechanism. The following metal extraction order was determined in the above aqueous phase acidity range: Ga(III) > In(III) > Al(III). The concentration constants and the thermodynamic parameters of the reaction of gallium(III) extraction from 6 M solutions of HCl at 25 °C were calculated.     

Extraction of Iridium(IV) by 1-(2-(2,4-Dichlorophenyl)-4-propyl-1,3-dioxolan-2-yl-methyl)-1H-1,2,4-triazole from Hydrochloric Solutions

Extraction of iridium(IV) by 1-(2-(2,4-dichlorophenyl)-4-propyl-1,3-dioxolan-2-yl-methyl)-¹H-1,2,4-triazole from hydrochloric solutions was studied. Optimal extraction parameters were determined. The mechanism of iridium(IV) extraction in this system is ion exchange (3.0 mol/L HCl and τ_cont = 5 min). Electronic, ¹H NMR, ¹³C NMR, and IR spectroscopy and elemental analysis were used to determine the composition of the extracted compound.     

Extraction of palladium(II) with (RS)-1-(4-chlorophenyl)-4,4-dimethyl-3-(1H-1,2,4-triazol-1-ylmethyl)pentan-3-ol from nitric acid solutions

Extraction of palladium(II) with (RS)-1-(4-chlorophenyl)-4,4-dimethyl-3-(1H-1,2,4-triazol-1-ylmethyl)pentan-3-ol from nitric acid solutions (carbon tetrachloride as diluent, octanol as modifier) was studied. Optimal extraction conditions were found. The reagent was shown to extract efficiently metal ions in a wide range of aqueous phase acidity by coordination mechanism. Aqueous ammonia solution was proposed as stripping agent for palladium(II). Concentrational extraction constants were calculated and thermodynamic parameters of extraction were determined.     

Gold(III) and palladium(II) extraction from hydrochloric acid solutions with (RS)-1-[2-(2,4-dichlorophenyl)pentyl]-1H-1,2,4-triazole

Gold(III) and palladium(II) extraction from 3 mol/L hydrochloric acid solutions with (RS)-1-[2-(2,4-dichlorophenyl)pentyl]-1H-1,2,4-triazole (chloroform diluent) was studied. Optimal extraction conditions were found. Coordination mechanism of extraction was established on the basis of IR and NMR spectra of extracted compounds. Concentrational extraction constants were calculated and thermodynamic parameters of the process were assessed.     

Synergistic extraction and spectrophotometric determination of copper(II) using 1-(2',4'-dinitro aminophenyl)-4,4,6-trimethyl-1,4-dihydropyrimidine-2-thiol: analysis of alloys, pharmaceuticals and biological samples

A simple and selective spectrophotometric method was developed for the determination of copper(II) with 1-(2',4'-dinitro aminophenyl)-4,4,6-trimethyl-1,4-dihydropyrimidine-2-thiol [2',4'-dinitro APTPT] as a chromogenic reagent. The procedure was based on the synergistic extraction of copper(II) with 2',4'-dinitro APTPT in the presence of 0.5 mol L(-1) pyridine to give green colored ternary complex of a molar ratio 1:2:2 (M:L:Py) in the pH range 8.7-10.5. It exhibits a maximum absorption of colored complex at 445 nm and 645 nm in chloroform against the reagent blank. Beer's law was followed in the concentration range 10-80 μg mL(-1) of copper(II) and optimum range of 20-70 μg mL(-1) the metal as evaluated from Ringbom's plot. The molar absorptivity and Sandell's sensitivity of copper(II)-2',4'-dinitro APTPT-pyridine complex in chloroform are 0.87×10(3) L mol(-1)c m(-1) and 0.072 μg cm(-2), respectively. The interfering effects of various cations and anions were also studied, and use of suitable masking agents enhances the selectivity of the method. The proposed method is rapid, reproducible and successfully applied for the determination of copper(II) in binary and synthetic mixtures, alloys, pharmaceutical formulations, environmental and fertilizer samples. Comparison of the results with those obtained using an atomic absorption spectrophotometer also tested the validity of the method.     

Gold(III) extraction by 1,3-Bis(2′-acetoxymethylthiobutyl-3′-thiobutylpropyl)-6-methyluracyl from hydrochloric acid solutions

Gold(III) extraction by 1,3-bis(2′-acetoxymethylthiobutyl-3′-thiobutylpropyl)-6-methyluracyl from 0.5 M HCl solutions to chloroform is studied. The reagent has a high efficiency, separates gold(III) ions from the sum of nonprecious and ferrous metals, and can be repeatedly used after stripping. The extraction mechanism is solvation, with Au-S coordination bonds formed with all sulfur atoms of the reagent; the solvation number changes from 1 to 0.25 with increasing gold(III) aqueous concentration.     

Xerogels doped with 1-(2-pyridylazo)-2-naphthol and Xylenol Orange: Indicator tubes and indicator powders for determining copper(II) and iron(III) in solution

Silica-based xerogels doped with l-(2-pyrilylazo)-2-naphthol and Xylenol Orange were prepared. The xerogels differ in the specific surface and the reagent concentration. Modified xerogels were used as indicator powders for determining copper(II) and iron(III) using indicator tubes. The effects of the reagent concentration in the indicator powder and its specific surface on the length of the colored zone were studied. Indicator tubes were developed for determining 0.3–300.0 mg/L copper(II) and 1.0–120.0 mg/L iron(III) in solutions. The results of determining copper(II) in plant mineral food and iron(III) in natural waters and ashed milk powder are presented.     

Selective extraction of iron(III) from aqueous nitrate solution in the presence of cobalt(II), copper(II) and nickel(II) ions using bis(delta2-2-imidazolinyl)-5,5'-dioxime.

The feasibility of using bis(delta2-2-imidazolinyl)-5,5'-dioxime (H2L) for the selective extraction of iron(III) from aqueous solutions was investigated by employing an solvent-extraction technique. The extraction of iron(III) from an aqueous nitrate solution in the presence of metal ions, such as cobalt(II), copper(II) and nickel(II), was carried out using H2L in binary and multicomponent mixtures. Iron(III) extraction has been studied as a function of the pH, equilibrium time and extractant concentration. From the extracted complex species in the organic phase, iron(III) was stripped with 2 M HNO3, and later determined using atomic-absorption spectrometry. The extraction was found to significantly depend on the aqueous solution pH. The extraction of iron(III) with H2L increases with the pH value, reaching a maximum in the zone of pH 2.0, remaining constant between 2 and 3.5 and subsequently decreasing. The quantitative extraction of iron(III) with 5 x 10(-30 M H2L in toluene is observed at pH 2.0. H2L was found to react with iron(III) to form ligand complex having a composition of 1:2 (Fe:H2L).     

Removal of Cd Ions by Sol-Gel Silica Doped with 1-(2-Pyridylazo)-2-Naphthol

1-(2-Pyridylazo)-2-Naphthol (PAN) doped sol-gel silica has been investigated for removal of metal ions from aqueous media. In the doped sol-gel silica, the large reagent molecules are entrapped inside the pores while small metal ions can diffuse into the pores where they are complexed by the reagent and retained inside the pores. This new solid sorbent was applied for removal of Cd(II) from aqueous solutions. The kinetics, adsorption isotherm, equilibration time and pH effect on the removal were studied to optimize the conditions to be utilized on a large scale. It was observed that a sol gel loaded with 0.09 mmol PAN/g, had a capacity of 0.044 mmol Cd/g. The desorption of metal ions was carried by 1 M HCl and the sol-gel silica sorbent could be regenerated and reused repeatedly.     

Extraction of gold(III), palladium(II), and platinum(IV) by 1-[2-(2,4-dichlorophenyl)-4-propyl-1,3-dioxolan-2-ylmethyl]-1<Emphasis Type="Italic">H</Emphasis>-1,2,4-triazole from hydrochloric acid solutions

The extraction of gold(III), palladium(II), and platinum(IV) with 1-[[2-(2,4-dichlorophenyl)-4-propyl-1,3-dioxolan-2-yl]methyl]-1H-1,2,4-triazole from hydrochloric acid solutions into toluene has been studied. The extraction follows the anion-exchange mechanism. The concentration constants and thermodynamic parameters of the extraction reaction have been calculated. The reagent is proposed for use in the extraction of the sum of precious metals.     

Palladium(II) extraction from hydrochloric acid solutions with diacylated triethylenetetramine

Extraction of palladium(II) with diacylated triethylenetetramine hydrochloride (with chloroform as diluent) from hydrochloric acid solutions was studied. Palladium(II) extraction from 3 mol/L HCl solutions occurs via anion-exchange mechanism. Concentrational constants were calculated and thermodynamic parameters of extraction were estimated.     

Preconcentration and separation of copper (II) with solvent extraction using N,N′-bis(2-hydroxy-5-bromo-benzyl)1,2 diaminopropane

Preconcentration and separation with solvent extraction of Cu(II) from aqueous solution using N,N′-bis(2-hydroxy-5-bromo-benzyl)1,2 diaminopropane (H₂L) as the new extractant has been studied. Separation of Cu(II) from other metal ions such as Cd(II), Ni(II), Zn(II), Pb(II), Cr(III), Co(II) and Mn(II) at aqueous solutions of various pH values and complexing agent H₂L, has been described. The possible extraction mechanism and the compositions of the extracted species have been determined. The separation factors for these metals using this reagent are reported while efficient methods for the separation of Cu(II) from other metal ions are proposed. From the loaded organic phase, Cu(II) stripping was carried out in one stage with different mineral acid solutions. The stripping efficiency was found to be quantitative in case of HNO₃ and HCl. From quantitative evaluation of the extraction equilibrium data, it has been deduced that the complex extracted is the simple 1:1 chelate, CuL. The extraction constant has a value of logK_ex=−4.05±0.04.     

Thioacetamide chemically immobilized on silica gel as a solid phase extractant for the extraction and preconcentration of copper(II), lead(II), and cadmium(II)

Thioacetamide immobilized on silica gel was prepared via the Mannich reaction. The extraction and enrichment of copper(II), lead(II), and cadmium(II) ions from aqueous solutions has been investigated. Conditions for effective extraction are optimized with respect to different experimental parameters in both batch and column processes prior to their determination by flame atomic absorption spectrometry (FAAS). The optimum pH ranges for quantitative adsorption are 4.0-8.0, 2.0-7.0, and 5.0-10.0 for Pb(II), Cu(II), and Cd(II), respectively. Pb(II) and Cd(II) can be desorbed with 3 mol/L and 0.1 mol/L HCl/HNO3, and Cu(II) can be desorbed with 2.5% thiourea. The adsorption capacity of the matrix has been found to be 19.76, 16.35, and 12.50 mg/g for Pb(II), Cu(II), and Cd(II), respectively, with the preconcentration factor of approximately equal to 300 for Pb(II) and approximately equal to 200 for Cu(II) and Cd(II). Analytical utility is illustrated in real aqueous samples generated from distilled water, tap water, and river water samples.     

Studies on the extraction of Copper(II) with 4-alkyldithiocarboxylate derivatives of 1-phenyl-3,5-dioxopyrazolidine

The extraction behaviour of copper(II) from acid solutions (pH 0-6) was studied with the new reagent 4-alkyldithiocarboxylate-3,5-dihydroxy-l-phenylpyrazol (HL; alkyl = n-butyl, n-dodecyl). The species extracted was found to be ML(2). The reagent was used to separate copper(II) from iron(III) in an acidic lixiviation solution of a mineral sample composed of enarguite (Cu(3)AsS(4)) and pyrite (FeS(2)). Additionally, the extraction efficiency of this new reagent was compared with the commercially available LIX 984 N extradant of copper (II).     

Extraction of mercury(II) from aqueous thiocyanate solutions with 5-(4-pyridyl)nonane in benzene, and its subsequent atomic-absorption spectrometric determination

Tracer ( approximately 10(-8)M) mercury(II) can be quantitatively extracted with 5-(4-pyridyl)nonane in benzene from aqueous thiocyanate solutions that are up to 6M in HCl, 1M in H(2)SO(4) or 0.25M in HNO(3), in a single extraction. Optimal conditions for the extraction are given, based on a critical study of the relevant factors such as the effects of the acids, thiocyanate, salting-out and complexing agents and the reagent concentration. The mechanism underlying these extractions is discussed on the basis of the results obtained from partition and slope-analysis data. The extraction of the metal as Hg(PyN)(2)(SCN)(2) is indicated. The extracted mercury can be stripped from the non-aqueous layer with various aqueous solutions, including nitric acid (2M), sodium citrate ( 1M) and sodium thiosulphate (0.1 M). Common salts do not depress the extraction. Distribution coefficients and separation factors of several elements relative to mercury(II) are reported for media that contain the optimal concentrations of the mineral acids and are in 0.2M in potassium thiocyanate. The data have been applied for the determination of mercury in soil and water samples by atomic-absorption spectrometry.     

Extraction of uranium from hydrochloric acid solutions by alkylated crown ethers

The extraction recovery of uranium from 1–10 mol/L hydrochloric acid solutions into solutions of alkylated crown ethers di-tert-butyldibenzo-18-crown-6 (DTBDB18C6) and di-tert-butyldicyclohexyl-18-crown-6 (DTBDCH18C6) in organic solvents (nitrobenzene, 1,2-dichloroethane, chloroform, 1-octanol) was studied. It was found that with increasing HCl concentration, the value of the distribution coefficients of uranium (D) between the organic and aqueous phases increased to a maximum value at 9 mol/L HCl for DTBDB18C6 and 6–7 mol/L HCl for DTBDCH18C6. The properties of the solvent also greatly affect the values of D, reaching a maximum in the application of nitrobenzene, dichloroethane, or their mixture. Under these conditions, D for a 0.01 mol/L solution of DTBDCH18C6 in nitrobenzene is 830, which is the highest of known values. It was determined by the slope method and the complete saturation method that the extracted complexes of the studied alkylated crown ethers with uranyl ions have the 2 : 1 composition. Thus, new supramolecular extractants of uranium from hydrochloric acid solutions have been studied, having an extremely high extraction capacity, which can be used in the analytical and preparative chemistry of uranium.     

Extraction of gold(III) with (RS)-1-(4-chlorophenyl)-4,4-dimethyl-3-(1H-1,2,4-triazol-1-yl-methyl)-pentan-3-ol from hydrochloric acid solutions

Extraction of gold(III) with (RS)-1-(4-chlorophenyl)-4,4-dimethyl-3-(1H-1,2,4-triazol-1-ylmethyl)-pentan-3-ol from 3 M hydrochloric acid solutions (with chloroform as a diluent) has been studied. Optimal extraction conditions have been found. The reagent has been shown to extract efficiently metal ion from solutions containing 3 M hydrochloric acid due to formation of coordination bond between gold(III) and the N4 atom of the triazole ring. The coordination mechanism of gold(III) extraction has been proposed on the basis of the data obtained. Concentration constants of extraction have been calculated, and the thermodynamic parameters of extraction have been determined.