Polarized Raman study of random copolymers of propylene with olefins

The polarized Raman spectroscopy is employed in the study of structural modifications in the films of isotactic polypropylene (PP) whose chain contains ethylene, 1-butene, 1-hexene, 1-octene, and 4-metyl-pentene-1, which represents an isomer of 1-hexene. It is demonstrated that the phase and conformational compositions of copolymer molecules depend on the comonomer content and the side-chain length of the second monomer. The content of the PP molecules in the helical conformation in the crystalline and amorphous phases of the copolymers monotonically decreases with increasing content of the second monomer. The decrease in the content of helical macromolecules in the crystalline phase is faster than the decrease in the amorphous phase. At a certain content of comonomers, the total content of the helical fragments decreases with increasing length of the side chain of the second monomer. The structures and Raman spectra of the copolymers of propylene with 1-hexene and 4-methyl-1-pentene are similar.     

X-ray studies of the structure of thermotropic copolyesters

This paper describes x-ray analysis of the structure of a group of wholly aromatic thermotropic liquid crystalline copolyesters, focusing on two systems: condensation copolymers of 4-hydroxy-benzoic acid (HBA) and 2-hydroxy–6-naphthoic acid; and of HBA, 2,6-dihydroxy-naphthalene, and terephthalic acid. The fiber diagrams of these copolymers contain a series of aperiodic meridional maxima that shift in position with the monomer ratio. We have shown that these characteristics are predicted by a structure consisting of an array of chains of completely random monomer sequence. The positions of the maxima are predicted by a simple model in which the monomers are represented by points, separated from their neighbors by the appropriate monomer lengths. Use of atomic models for the monomers leads to prediction of both the positions and the intensities of the maxima. Calculations for nonrandom sequence distribution show that all but minimal blockiness can be ruled out. From the breath of the meridional maximum at d = 2.1 Å it is possible to estimate the correlation or persistence length for the stiff chain conformation in the solid state.     

抗冲共聚聚丙烯中二甲苯可溶物的链结构与性能研究

抗冲共聚聚丙烯(IPC)是聚丙烯与乙烯-α-烯烃共聚产物在反应釜内形成的原位共混物,乙烯-α-烯烃无规共聚物(橡胶相)作为聚丙烯增韧剂,增韧能力受其组成、玻璃化转变温度(T_g)的影响很大。目前工业界主要采用二甲苯可溶物来表征IPC中橡胶相的含量。该研究采用红外光谱(FTIR)、核磁共振(NMR)和热分析(DSC)等方法对两种不同催化剂制备的IPC的二甲苯可溶物,进行了组成、链结构及热性能对比研究,结果显示二甲苯可溶物中除了乙烯-丙烯无规共聚物外,还含有少量的具有可结晶乙烯序列的乙烯-丙烯多嵌段共聚物,且两个样品中的乙烯-丙烯多嵌段共聚物中可结晶乙烯序列长度存在差别;两个样品中乙烯、丙烯单元在分子链上无规分布的程度比较接近;丙烯序列PPP的含量相对低且乙烯共聚单元含量高的样品具有更低的Tg,这将有利于其对聚丙烯抗冲击韧性的提高。     

Preparation and Characterization of Poly (Acrylonitrile-co-1-Acryloylpyrrolidine- 2-Carboxylic Acid) with High Molecular Weight

1-acryloylpyrrolidine-2-carboxylic acid (APCA) monomer was copolymerized with acrylonitrile (AN) by aqueous suspension polymerization. High molecular weight (HMW) copolymers of AN and APCA [poly(AN-co-APCA)] with different copolymer composition were successfully prepared by employing azobisisobutyronitrile (AIBN) as initiator and polyvinyl alcohol (PVA) as dispersant in a H₂O/N,N-dimethylformamide (DMF) mixture at 60°C. The PAN homopolymer and copolymers were characterized by elemental analysis (EA), nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and X-ray diffraction (XRD). The EA results indicated that the content of oxygen increased significantly in PAN copolymers with increasing APCA content. The APCA copolymer composition calculated from the EA was higher than that from ¹H NMR spectra. The FTIR spectra of PAN and poly(AN-co-APCA) with different monomer ratios confirmed that the contents of APCA units in the copolymer chains increased with increasing APCA content in the feed. The DSC exotherms revealed that copolymerization with APCA could slow the rate of the exothermic reactions during the heat-treatment processes. The XRD results indicated that the PAN homopolymer and copolymers poorly crystallized and the crystallinity decreased with increasing APCA contents.     

BSO晶体生长固/液边界层结构的实时观测研究

实时测量BSO晶体水平区熔法生长过程中,研究固/液边界层以及边界层两侧的晶体和熔体的显微拉曼光谱,晶体生长固/液边界层以及边界层两侧的熔体和晶体的结构特征, 生长基元结构从熔体结构经边界层过渡到晶体结构的变化过程。结果显示, BSO熔体中存在Bi₃O₄和[SiO₄]的键合结构; Bi₃O₄分子基团在固/液边界层聚合形成[BiO₇]八面体单体、多聚体,与[SiO₄]结构基团联结,在通过固／液边界层时进入格位。     

受限壁的选择性对软受限下星形三嵌段共聚物形貌的影响

基于嵌段共聚物在软受限条件下能够自组装形成很多有序结构,在催化、电子器件、光学传感等领域有广泛的应用价值,目前只对线性三嵌段共聚物在软受限下的自组装形貌做了分析,对星形三嵌段共聚物在软受限下的自组装行为还未有一个统一的定论.在这项研究中,应用模拟退火来研究ABC星形三嵌段共聚物在软受限下的自组装行为,嵌段与溶剂没有选择性下(中性壁),通过调整三个嵌段(f_A、f_B和f_C)的体积分数来构建相图,我们的模拟预测了各种独特的自组装纳米结构,包括薄片+球形、圆柱状,穿孔层,薄片+圆柱体,核壳补丁.然后通过改变嵌段与溶剂的选择性预测了链长度比为1:x:1的共聚物粒子形貌.通过计算接触数、均方根末端距与平均链长的比值以及平均键长随x的变化,验证了形貌转变机制.     

甲基丙烯酸甲酯-萘乙烯共聚物的核磁共振研究──1.甲基丙烯酸甲酯-萘乙烯共聚物的2D NMR谱研究

用500MHz超导核磁共振谱仪测定了甲基丙烯酸甲酯-萘乙烯共聚物的二维异核多量子化学位移相关谱和二维相敏NOESY谱，由此归属了共聚物的碳谱和氢谱，结果表明，聚合物是以无规共聚物为主，其中有一部分是以头一头（或尾一尾）相接的．文中还以反门控去偶测得其共聚含量．     

甲基丙烯酸甲酯-萘乙烯共聚物的核磁共振研究——I.甲基丙烯酸甲酯-萘乙烯共聚物的2D NMR谱研究

用500MHz超导核磁共振谱仪测定了甲基丙烯酸甲酯-萘乙烯共聚物的二维异核多量子化学位移相关谱和二维相敏NOESY谱,由此归属了共聚物的碳谱和氢谱,结果表明,聚合物是以无规共聚物为主,其中有一部分是以头-头(或尾-尾)相接的.文中还以反门控去偶测得其共聚含量.     

新型茂金属聚烯烃弹性体Vistamaxx的溶液13C NMR 研究

Vistamaxx特种弹性体是一种新型的茂金属催化丙烯-乙烯共聚物,通过对其在溶液中¹³C NMR谱的归属和计算得到3种不同牌号的Vistamaxx弹性体的共聚物组成、单体和序列分布、亚甲基数均序列链长及分布等信息,并分别采用Bernoullian和一级Markovian统计模型对共聚物的三单元组序列分布进行处理,依据组成分布函数条件概率公式得到乙烯单元和丙烯单元的组成分布曲线.      

Stability of dense hydrophobic-polar copolymer globules: Regular,random and designed sequences

Stability of dense globular structures formed by amphiphilic copolymers consisting of hydrophobic (insoluble) units and a small fraction of single polar (soluble) monomer units is considered in the mean-field approximation for different types of unit distributions along the chain. Polar (P) units are located in a relatively thin surface layer due to their strong repulsion from hydrophobic (H) monomer units. We compared globules formed by different copolymer sequences with the same gross numbers of P- and H-units: regular HP-sequences (P-units separated by equal H-blocks), random copolymers (uncorrelated positions of P-units, i.e. Flory distribution of H-block lengths), proteinlike (PL) sequences (designed sequences involving both long H-blocks dominating by total mass, and short blocks dominating by number). We showed that PL-globules are more stable (lower free energy) and are characterized by a higher temperature of the coil-to-globule transition when compared with the other sequences mentioned above. We also considered HP-H-copolymers consisting of one long and many short hydrophobic blocks; we showed that it is these sequences that yield the dense globules corresponding to the lowest free energy.Received: 3 July 2003, Published online: 11 November 2003PACS: 61.25.Hq Macromolecular and polymer solutions; polymer melts; swelling     

Synthesis and Properties of Thermotropic Poly(oxybenzoate-co-oxynaphthoate) Copolyester Modified by a Third AB Type Monomer

Abstract

The synthesis and modification of high performance thermotropic liquid crystal polyesters (TLCP) are still being investigated due to their excellent properties. In this study modification of poly(oxybenzoate-co-oxynaphthoate) (P-HBA/HNA), a random copolymer of 4-hydroxybenzoic acid (HBA) and 6-hydroxy-2-naphthoic acid (HNA), by 5?mol% of one of three AB type monomers (AB type monomers are those who have hydroxy and carboxylic end groups), vanillic acid (VA), 4-hydroxyphenylacetic acid (HPA) and 4-hydroxycinnamic acid (HCA), was conducted. The influence of the AB type third monomer on the liquid crystal properties, melting behavior, thermal stability, microstructure and fiber morphology of the resulting modified terpolyesters was comparatively studied relative to the parent copolymer. When 5?mol% of the HBA units were replaced, the resulting terpolyesters had much lower melting temperatures and could be easily melt processed, while the modified terpolyesters exhibited higher melting and glass transition temperatures when 5?mol% of the HNA units were replaced. Weaker melting peaks and larger melting ranges were observed for the modified terpolyesters, attributed to the existence of nonperiodic layer crystallites caused by the modifiers. The obtained terpolyesters showed good thermal stability and could be melt processed in a broad nematic phase temperature region. The molecular chain packing of the modified terpolyesters was almost destroyed by the third AB type reactants. Fibers prepared from the resulting terpolyesters exhibited well developed fibrillar structure and higher orientation factors, indicating that modification of the P-HBA/HNA by using the AB type monomers to improve its properties would be useful.     

Binary-component micelle and vesicle: Free energy and asymmetric distributions of amphiphiles between monolayers of vesicle

The real-space two-dimensional self-consistent field theory (SCFT) is employed to study the free energies of micelles and vesicles constituted by binary amphiphilic diblock copolymer AB in homopolymer A. With increasing volume fraction of copolymer AB, there are morphological transitions from the circle micelles to oblate circle-like micelles, to compound structure with inverted micelles in the inner center and micelles outer layer, and to vesicles. Special attentions are paid to the role of the copolymer AB in controlling free energies of the micelles and vesicles, by examining the effect of length ratio of A/B with the fixed whole chain length of AB copolymer, the length effect of A or B block with the corresponding fixed length of B or A block, for one component of copolymer, and the effect of different amphiphile compositions for binary-component copolymer system. The quantity η is provided to describe the asymmetric density distribution of amphiphiles between the inner and outer monolayers of vesicles, and to quantify the relative asymmetric extent of the density distribution between two species of copolymers in binary component vesicles.     

Raman structural study of random copolymers of propylene with 1-pentene

Nascent form of random propylene/1-pentene copolymers was studied for the first time by Raman spectroscopy. For the purpose of detailed interpretation of the copolymer spectra, we investigated Raman spectra of neat PP with low and high crystallinity. It was found that the copolymer Raman spectra depend on the 1-pentene content. We registered the most significant spectral alterations in two lines at 809 and 841 cm^?1. The first line corresponds to vibrations of polypropylene (PP) isotactic chains in the crystalline phase, while the second one is associated with vibrations of PP isotactic chains having isomeric defects. We found out that increase in the 1-pentene content results in reduction of the copolymer crystallinity and in the content of isotactic chains in the copolymer amorphous phase.     

Preparation and Surface Properties of Fluorinated Acrylates Copolymers

Copolymerization of acrylates and styrene (St) with perfluorooctylacyloxyethyl methacrylate (FA) monomer, prepared from the reaction of perfluorooctanoic acid and hydroxymethyl methacrylate, was carried out by solution polymerization. The fluorinated acrylate and St copolymers (PFA) were examined by GPC, FT-IR, and ¹H NMR. The surface tension of the PFA solution in N-methyl pyrrolidone was tested by the drop volume method. The results showed that the surface tension of the PFA solution decreased in exponential decay with increase of the PFA concentration, and the surface tension of the solution also decreased with increased addition of the FA monomer in the copolymer at the same concentration. Meanwhile, the adsorption of the PFA macromolecules in the air–solution interface increased and enrichment of the fluorinated segments on the solution surface occurred. The studies of the surface free energy, polarity, fluorine content, and morphology of the PFA films illustrated that the surface free energy and polarity of the PFA films were decreased with the augment of the FA monomer in the copolymers, and that the fluorine content and the surface roughness were increased. The surface free energy of the PFA film was as small as 16.6 mN·m^?1. The surface properties of the PFA copolymers obtained by one shot feed during polymerization were superior to those obtained by continuing feed procedure. More fluorine segregation occurred and induced the formation of a fluorine-enriched surface if the PFA copolymer was postheated. The posttreatment was thus beneficial to the improvement of the surface properties of the PFA film.     

Raman structural study of random copolymers of ethylene with 1-hexene

Ethylene/1-hexene copolymers, which differ significantly in 1-hexene content (from 1.9 to 37.0 mol %), are studied by Raman spectroscopy. The copolymer spectra are compared with the Raman spectra of polyethylene at elevated temperatures. We have found that the phase and conformational order of the copolymer macromolecules depends strongly on the 1-hexene content. In particular, an increase in 1-hexene content leads to a decrease in content of the PE-like orthorhombic crystalline phase and in content of trans-conformers in the amorphous phase. The Raman signature at about 800 cm^?1 provides information about the end conformers for the ethylene/1-hexene copolymers with high 1-hexene content.     

不对称二聚物粒子在两嵌段共聚物形成的支撑膜上的自组装

结合自洽场理论和密度泛函理论,研究了不对称的二聚物粒子在AB两嵌段共聚物形成的支撑膜上的自组装行为. 不对称的二聚物粒子是由两个不同的球组成的两性分子. 其中一个球与A嵌段相亲,另外一个喜欢B嵌段. 不对称粒子能在支撑膜上形成一个双层结构. 由于衬底的存在,所形成的支撑膜上下两叶的对称性被破坏,导致了二聚物粒子在膜上形成的结构也变的不对称. 随着二聚物粒子浓度的增加,在膜上的二聚物粒子的结构将发生变化,从稀四方、六角、密四方再到圆柱结构. 在一个高浓度的密堆积下,二聚物粒子将形成弯曲的圆柱结构. 在支撑膜     

PHASE SEPARATION IN THE MELT OF POLYPROPYLENE–1-DECENE COPOLYMERS

A propylene homopolymer and three copolymers with 1-decene containing 1.82, 3.55, and 7.83 mol% of comonomer units, respectively, were prepared with metallocene catalyst and the phase behavior in the melt of these polymers was studied using simultaneous synchrotron small-angle x-ray scattering and differential scanning calorimetry. The results show that the phase behavior of the melt varies with comonomer content and the copolymers tend to be phase-separated with increasing comonomer content. The phase separation in the melt of the propylene–1-decene copolymers was further confirmed by the fitting of the experimental data with Teubner–Strey micro-emulsion model and a transition from the phase-separated melt to the disordered melt was observed. We tentatively attribute this phenomenon to the inhomogeneous intra-molecular composition distribution at high levels of comonomer and the incompatibility of propylene sequences with different lengths. Such a finding is consistent with the facts of multiple melting peaks and mixed γ and α crystal phases in the polymer solids. Since the phase behavior depends on temperature, the effect of annealing temperature, from which the copolymers were cooled, on the nonisothermal crystallization of the copolymers was also investigated. It is found that higher degree of phase separation accelerates the crystallization but reduces the crystallization enthalpy.     

最有效的相容剂是两嵌段还是多嵌段聚合物？

采用Monte Carlo模拟方法研究了多嵌段聚合物在A／B／嵌段聚合物三组份体系作为相容剂使用的有效性．占总体积19％的A组份在体系中为分散相．模拟结果显示了两嵌段和多嵌段聚合物在界面上的聚集行为,以及如何影响这个不相容体系的相形为．两嵌段聚合物趋于直立在相界面上,而多嵌段聚合物更容易横跨在相界面上并占据较大的界面积．从而导致多嵌段聚合物更有效的阻止体系相分离的发生．     

Designing pattern-recognition surfaces for selective adsorption of copolymer sequences using lattice monte carlo simulation

We describe a simulation method to design surfaces for recognizing specific monomer sequences in copolymers. We fix the monomer sequence statistics of the AB copolymers on a surface containing two types of sites and allow the simulation to iterate towards an optimal surface pattern that can recognize and selectively adsorb the sequence in the copolymer. During the simulation the surface pattern is designed by switching identities of two randomly picked sites. For copolymers with less blocky sequences the designed surfaces recognize the correct sequence well when the segment-surface interactions dominate over the intersegment interactions. For copolymers with more blocky sequences recognition is good when the segment-surface interactions are only slightly stronger than the intersegment interactions.     

Microstructural evolution and martensitic transformation mechanisms during solidification processes of liquid metal Pb

The microstructural evolution and the martensitic transformation (bcc–hcp and bcc–fcc) mechanisms during the solidification process of liquid metal Pb were studied by molecular dynamics simulation. Results indicate that, with the decrease of temperature, the system undergoes two phase transitions: from the liquid state into a metastable bcc phase first and then from the bcc phase into a coexisting crystal structure of hcp and fcc phases. Moreover, the complicated martensitic transformation processes are clearly observed by cluster type index method (CTIM) and the tracing method. The two transformation mechanisms are very analogous at the atomic level; the essential difference between them is that, in the bcc–hcp transformation, two adjacent layers shift in opposite directions, whereas in the bcc–fcc transformation, the top layer and bottom layer shift in opposite directions relative to the middle layer. The specific mechanisms for the bcc–hcp and bcc–fcc transformations are confirmed to correspond to the revised Burgers mechanism and Bain mechanism, respectively.