Organic Nano-Montmorillonite for Simultaneously Improving the Flame Retardancy,Thermal Stability,and Mechanical Properties of Intumescent Flame-Retardant Silicone Rubber Composites

The flammability of room temperature vulcanized silicone rubber (RTVSR) composites filled with melamine phosphate (MP) as intumescent flame-retardant additives was characterized by limiting oxygen index (LOI), UL-94 test, and cone calorimeter. In addition, the thermal degradation of the composites was studied using thermogravimetric analysis (TGA). Furthermore, in order to relate to actual application requirements, the comprehensive performance of the RTVSR/MP composites was optimized by adding organic nano-montmorillonite (OMMT) as a partial substitute for the MP. The as-prepared intumescent flame-retardant RTVSR/MP/OMMT nanocomposites were characterized by LOI, UL-94 test, TGA, cone calorimetry, scanning electron microscopy (SEM), and mechanical tests. The residue morphology formed after the burning of the nanocomposites was analyzed by its SEM and digital photographs. The results showed that the flame-retardant nanocomposites filled with 10 phr OMMT and 35 phr MP displayed the best comprehensive performance in terms of the flame retardancy, mechanical properties, and heat stability at low cost. It is expected that the intumescent flame-retardant silicone rubber composites with simultaneously improved flame retardancy, thermal stability, and mechanical properties will meet more requirements of the increasingly complex applications.     

Synergistic Effect of Polyhedral Oligomeric Silsesquioxane and Multiwalled Carbon Nanotubes on the Flame Retardancy and the Mechanical and Thermal Properties of Epoxy Resin

A novel polyhedral oligomeric silsesquioxane containing phosphorus and boron (PB-POSS) was synthesized. The resulting PB-POSS and multiwalled carbon nanotubes (MWCNTs) were incorporated into an epoxy resin (EP) to prepare PB-POSS/MWCNTs/EP composites through a solution mixing method. The synergistic effect of MWCNTs and PB-POSS on the thermal and mechanical properties and the flame retardancy of these flame retardant composites were studied. The experimental results showed that the introduction of PB-POSS or MWCNTs further improved the LOI values of the epoxy resin, and the highest LOI value (32.8%) was obtained for the formulation containing 14.6 wt% PB-POSS and 0.4 wt% MWCNTs. In addition, the incorporation of both PB-POSS and MWCNTs significantly improved the thermal and mechanical properties of the composites. The mechanical properties of composites containing 14.7 wt% PB-POSS and 0.3 wt% MWCNTs reached the maximum. The impact strength and flexural strength increased by 42% and 7%, respectively, compared to the neat epoxy resin. Thus, a combination of PB-POSS and MWCNTs in the appropriate ratio could effectively enhance the thermal and mechanical properties and the flame retardancy of the epoxy resin matrix.     

Synergistic Effect of Organic Vermiculite on the Flame Retardancy and Thermal Stability of Intumescent Polypropylene Composites

Organic vermiculite (OVMT) prepared from vermiculite (VMT), with high aspect ratio and orderly arranged platelets intercalated by octadecyl trimethyl ammonum bromide (OTAB), was used as a synergistic agent on the flame retardancy of a polypropylene/intumescent flame retardant (PP/IFR) system. The flammability and thermal stability of PP/IFR/OVMT composites were investigated by limiting oxygen index (LOI), UL-94 testing, cone calorimetry tests, and thermogravometric analysis. The results of LOI and UL-94 testing showed that low loading of OVMT improved the flame retardancy and retarded dripping for PP/IFR composites. OVMT, with 1% loading, increased the char residue of PP/IFR composites and could act as an effective additive for improvement in flame retardancy, which was confirmed by the cone data. The char layer morphological structures observed by scanning electron microscopy (SEM) showed that OVMT with 1% loading can promote formation of a continuous and compact intumescent char layer. Raman spectroscopy results indicated that the OVMT or its pyrolytic products led to a decrease in size of the carbonaceous micro-domain during combustion, resulting in formation of more compact charred layers. Thus, OVMT with 1% loading showed a synergistic effect with IFR in the combustion of the PP/IFR composites.     

Synthesis of a Novel Flame Retardant and Its Synergistic Effect With a Phosphapheanthrene Flame Retardant in Polypropylene/Polyethylene Vinyl Acetate Blends

A novel flame retardant (NSiB) containing nitrogen, silicon and boron was synthesized through reacting of N-(β-aminoethyl)-γ-aminopropyl trimethoxy-silane (KH-792) and boric acid. The structure of NSiB was characterized by Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy with energy dispersive spectrometry (SEM-EDS). The effects of NSiB on the flame retardancy and thermal behaviors of polypropylene (PP)/polyethylene vinyl acetate (EVA) blends were investigated by limiting oxygen index value (LOI), vertical burning tests (UL-94) and thermal gravimetric analysis tests (TGA). The results showed that the flame retardancy and thermal stability of PP/EVA blends were improved with the addition of NSiB. When 7.5 wt% DOPO (phosphaphenanthrene) and 0.5 wt% NSiB were incorporated, the LOI value of the PP/EVA blends was 26.9%, and the class V-0 of UL-94 test was passed, as compared to the LOI value of 22.4% and class V-2 of UL-94 test for 8.0 wt% DOPO only and 16.7% and fail, respectively, for the PP/EVA blends alone. The char structure observed by SEM indicated that the surface of the char for the PP/EVA/7.5 wt% DOPO/0.5 wt% NSiB blends had a denser and continuous char structure when compared with that of the PP/EVA blends and PP/EVA/8.0 wt% DOPO blends. These results indicated that there was a good synergistic effect for NSiB and DOPO.     

Thermal and Flammability Properties of Polypropylene/Silica Aerogel Composites

Polypropylene (PP)/silica aerogel (SA) composites were prepared and their thermal and flammability properties were studied. The PP/SA composites with different weight percent were prepared via melt compounding method using an internal mixer. Their morphology, thermal conductivity, thermal stability and combustion behavior were characterized. The SEM images confirmed the homogenous mixing of the components. The measurement of the thermal conductivities of samples indicated that PP would be a better thermal barrier in the presence of SA. The thermal gravimetric analysis results showed that combining the silica aerogel particles into polypropylene increased the decomposition temperature. The resultant composites displayed improved flame retardancy with a significant reduction in the peak heat release rate and increase of limited oxygen index value. It can be concluded that the flame retardant mechanism of PP/SA composites is associated with two decisive factors: a coat-like char effect and a physical crosslinking effect.     

Influence of the Polymer/Inorganic Filler Interface on the Mechanical,Thermal, and Flame Retardant Properties of Polypropylene/Magnesium Hydroxide Composites

The relationship between the interface structure and the macroscopic properties of composites composed of isotactic polypropylene (iPP) and magnesium hydroxide (MH) was investigated with a focus on mechanical properties, thermal stability, and flame retardancy. Surface treatment of MH was carried out using dodecanoic acid (DA) and dodecylphosphate (DP), both of which interacted with MH to form submonolayer coverages. Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) revealed that both organic reagents adhere to the MH surface via ionic interactions. Even low amounts of organic reagents on the MH surface were sufficient to improve the mechanical, thermal, and flame retardant properties of the composites. The incorporation of 1.8 wt% of DP in (70/30) iPP/MH-DP composite decreased the peak heat release rate (PkHRR) to 39% compared with that of neat iPP. Since the effects of DA with the same dodecyl chains were not significant, it is concluded that the phosphate groups in DP provide flame retardancy.     

Effects of Magnesium Hydroxide on the Flame Retardancy of Ethylene-Vinyl Acetate Copolymers/Nitrile Rubber Blends

The fire-resistant noncorrosive ethylene-vinyl acetate copolymers with vinyl acetate (VA) content > 40 wt.% (EVM)/acrylonitrile-butadiene rubber (NBR)/magnesium hydroxide (MDH) composites were prepared, and the influence of MDH contents on flame retardancy, thermal stability, filler dispersion, and mechanical properties were studied. The flame-retardant effect of three different flame retardants [micro-sized MDH (mMDH), nano-sized MDH (nMDH), and micro-sized aluminum hydroxide (mATH)] was also investigated by cone calorimetry, thermal gravimetric analysis, and rubber process analysis in this paper. The decrease of the heat release rate and total heat release, the increase of residual mass, and the enhancement of thermal stability of the composites were all due to the flame-retardant effect of the MDH. The EVM/NBR vulcanizates had the best flame retardancy when the mMDH content was 180 phr. It was also found that the nMDH, mMDH, and mATH at the same loading had no obvious influence on the limiting oxygen index, while the combustion behaviors measured by the cone calorimeter had significant differences. The addition of ATH prolonged the time to ignition. The mMDH showed a better flame retardancy for EVM/NBR vulcanizates than the nMDH.     

Mechanical and Flame Retardant Properties and Microstructure of Expandable Graphite/Silicone Rubber Composites

Flame-retardant expandable graphite (EG)/silicone rubber (SR) composites were prepared using nano-CaCO₃ particles as reinforcement filler. In addition to mechanical measurements, limited oxygen index (LOI), UL-94 and cone calorimeter tests (CCT), the thermal properties were tested by thermogravimetric analysis (TGA). The results showed that the content and particle size of the EG both had large effects on the flammability and mechanical properties of the EG/SR blends. The composites that contained 25 phr EG (50–80 mu) had excellent LOI values, 47–48, and achieved the UL-94 V-0 level while the pure SR sample had the LOI value of 25 and achieved the UL-94 V-2 level. The data obtained from the CCT indicated that the addition of EG decreased remarkably the heat release rate, smoke emission, and mass loss rate of the composites. SEM microphotographs of the EG/SR composites before and after combustion demonstrated that EG underwent a large volume expansion, and the multiporous char structure blocked heat transfer and protected the substrate from fire.     

Effect of Polyborosiloxane on the Flame Retardancy and Thermal Degradation of Intumescent Flame Retardant Polypropylene

A novel synergistic flame retardant agent containing boron and silicon, namely polyborosiloxane (PBSil), was prepared via the condensation reaction of boric acid (BA), tetraethoxysilane (TEOS), and octamethyl cyclotetrasiloxane (OMCTS). The obtained PBSil was then combined with an intumescent flame retardant (IFR) to flame retard polypropylene (PP), and the effects of PBSil on the flame retardancy and thermal degradation of the PP/IFR composite were investigated. It was found that PBSil could improve the compatibility between the IFR and the PP matrix, thereby improving the mechanical properties of the composite. Compared with zinc borate, zeolite, and nano-silica, PBSil showed much better flame retardancy and smoke suppression in the PP/IFR composite. When the content of PBSil was 3.0 wt%, the limiting oxygen index (LOI) value of the flame retardant PP was increased from 29.0% to 35.0%, and the UL-94 rating was improved from V-1 to V-0 rating. Simultaneously, the heat release rate (HRR) and smoke production rate (SPR) of the composite were decreased dramatically. The thermogravimetric (TG) analysis, Fourier transform infrared (FTIR), and thermogravimetry-Fourier transform infrared spectrometry (TG-FTIR) results showed that, PBSil could enhance the thermostability of the IFR, and promote the char formation. Furthermore, the compactness and thermostability of the intumescent char were significantly improved, contributing to the improvement of the flame retardancy of the composite.     

Thermorheological Properties and Thermal Stability of Polyethylene/Wood Composites

The thermal stability, flame retardancy, thermorheological, and mechanical properties of polyethylene/wood flour (PE/WF) composites were characterized. By time–temperature superposition treatment, addition of WF was found to lead to a complexity in the thermorheological behaviors in low-density PE/wood composites. However, high-density PE/wood counterparts showed no obvious thermorheological complexity. The effects of WF and ammonium polyphosphate contents on the thermorheological behavior and thermal stability were also studied. The current work should be of practical significance for the optimization of wood/plastic composite) formulae, as well as for further investigations on correlations between processing and performance of polymer composites.     

Effect of Phosphorus Compounds on Flame Retardancy and Thermal Degradation of Polycarbonate and Acrylonitrile–Butadiene–Styrene

Phosphorus flame retardants, bis(2,6-dimethylphenyl) phenyl phosphonate (BDMPP) and poly(bisphenol S phenyl phosphonate) (PBSPP), were synthesized and their structures were characterized with Fourier transform infrared spectroscopy, and ¹H and ³¹P nuclear magnetic resonance. The phosphorus compounds were used to impart flame retardancy to polycarbonate (PC) and acrylonitrile–butadiene–styrene (ABS). Combustion behaviors and thermal degradation properties of the systems were assayed by limiting oxygen index (LOI), vertical burning test (UL-94), and thermogravimetric analysis. PC/7 wt.% BDMPP and PC/5 wt.% PBSPP pass UL-94 V-0 rating; their LOI values were 32.7% and 33.6% respectively. ABS/35 wt.% BDMPP and ABS/30 wt.% PBSPP also pass the UL-94 V-0 rating and their LOI values were 28.9% and 28.3% respectively. Scanning electron microscopy revealed that the char properties had direct effects on flame retardancy.     

Synthesis and Application of a Novel Charring Agent Poly(p-ethylene terephthalamide)

A novel charring agent poly(p-ethylene terephthalamide) (PETA) was synthesized by using terephthaloyl chloride and ethylenediamine through solution polycondensation at low temperature. Poly(p-ethylene terephthalamide) was used together with ammonium polyphosphate (APP) to prepare a novel intumescent flame retardant (IFR) for acrylonitrile–butadiene–styrene (ABS). The thermal degradation behavior and flame retardancy were investigated by thermogravimetric analysis and limiting oxygen index (LOI) tests, and the morphology and structures of residues generated in different conditions were investigated by scanning electron microscopy and Fourier transform infrared spectra. The results showed that PETA could be effective as a charring agent, the flame retardancy of ABS and the weight of residues improved greatly with the addition of IFR. When the content of APP was 25 wt% and PETA was 12.5 wt%, the LOI value of IFR–ABS system was found to be 33, and class V-0 of UL-94 test was passed. The microstructures observed by scanning electron microscope indicated that the charring agent (PETA) can promote formation of uniform and compact intumescent charred layers in IFR–ABS system after burning.     

Preparation and Flammability of a Flame-Retardant Poly(Butyl Acrylate-Vinyl Acetate) System Based on Gemin-Surfactant Modified Montmorillonite and Ammonium Polyphosphate

Gemin-surfactant modified montmorillonite (G-MMT) was successfully prepared by an ion exchange reaction and characterized via Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). The P(BA-VAc)/G-MMT emulsion was prepared via an in-situ polymerization method using potassium persulfate (K₂S₂O₈, KPS) as an initiator. Ammonium polyphosphate (APP) was introduced for obtaining P(BA-VAc)/APP/G-MMT flame-retardant latex with a constant total content of 15 wt% of APP and G-MMT in P(BA-VAc). The flame retardancy and thermal behavior of the latex films were investigated by limiting oxygen index (LOI), vertical burning test (UL-94) and thermal gravimetric analysis (TG/DTA). Compared with the P(BA-VAc)/APP composite, the LOI value of P(BA-VAc)/APP/G-MMT containing 0.5 wt% G-MMT at the same total additive loading increased to 29.1 from 20.0 and its UL-94 increased from no rating to V-0. Thermal gravimetric (TG) data showed that the amount of residues increased significantly with the loading of G-MMT. In addition, the LOI values increased with the increase in char residues. The morphology and microstructure of the residues generated during LOI testing were investigated by scanning electron microscopy (SEM). The outer surfaces of P(BA-VAc)/APP/G-MMT charred layers were more continuous and compact than those of P(BA-VAc)/APP.     

Synergistic Effect of Phosphorus-Containing Montmorillonite with Intumescent Flame Retardant in Polypropylene

Phosphorus-containing montmorillonite (P-MMT) was successfully prepared via intercalating resorcinol bis(diphenyl phosphate) (RDP) into montmorillonite (MMT) layers, and was utilized as a synergistic agent in the polypropylene/melamine pyrophosphate/pentaerythritol (PP/MPP/PER) intumescent flame retardant (IFR) system. The synergistic effect of P-MMT and IFR was investigated by dynamic mechanical analysis (DMA), thermogravimetry (TG), limiting oxygen index (LOI), UL-94 test, cone calorimeter test (CCT), and scanning electron microscopy (SEM). It was found that P-MMT could significantly improve the thermostability and flame retardancy of the PP/IFR composite. When 2.0 wt% P-MMT replaced the same amount of IFR in the composite, both the onset decomposition temperature (T _onset) and the maximum-rate decomposition temperature (T _max) of the PP/IFR composite were increased by more than 14°C. Meanwhile, the LOI value was increased from 29.5% to 32.5%, the UL-94 rating was enhanced from V-1 to V-0, and the heat release rate (HRR), total heat release (THR), and mass lose rate (MLR) were decreased dramatically, which proved that P-MMT had a good synergistic effect with IFR in flame retardant PP.     

An Insight into the Diffusion of Unsaturated Polyester (UP) Resin into Expanded Graphite (EG) to Improve the Mechanical Properties of the UP/EG Composites

Abstract

Polymer/expanded graphite (EG) nanocomposites have great importance in many industrial applications mainly due to their high electrical/thermal conductivity or flame retardancy. However, to fully employ the benefits of polymer/EG nanocomposites one must consider the high degree of porosity of EG. The high degree of porosity of EG can deteriorate the composites’ mechanical properties if the polymer chains cannot diffuse completely into the EG pores. In this article, an insight is given into the diffusion of unsaturated isophthalic polyester (UP) resin, consisting of a combination of maleic anhydride and isophthalic anhydride in the resin backbone, with two viscosities, into the pores of the EG particles of various degrees of porosity. The diffusion experiments were carried out on compressed EG tablets with the same density but different porosity due to the different porosity of the EG particles. The results showed that the diffusion rate of the UP resin with higher viscosity slightly decreased when the EG porosity decreased but, in the opposite way, it strongly increased for the low viscosity UP resin. The EG nanocomposites samples were molded at varying pressures. The micrographs of the fractured surfaces of the EG nanocomposites showed that the EG pores were not filled with resin, thus the EG nanocomposites had residual pores. It was found that composites containing EGs with higher expansion ratio and larger particles and pores showed larger residual pores. Furthermore, the composites prepared with the more viscous UP resin showed more residual pores. By applying a pressure of 10?bar instead of 1?bar, a reduction of 7–20% in the residual pores of the nanocomposites was observed which led to improved mechanical properties by up to 20% in flexural strength for the EG with the highest expansion ratio.     

Preparation and Characterization of Composites Based on Poly (Butylene Succinate) and Poly (Lactic Acid) Grafted Tetracalcium Phosphate

Tetracalcium phosphate (TTCP, Ca₄(PO₄)₂O) was functionalized by poly (l-lactic acid) (PLLA) in order to improve the dispersion of TTCP particles in poly (butylene succinate) (PBS) matrices, and then a series of the PLLA grafted TTCP/PBS (g-TTCP/PBS) composites were prepared via melt processing. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), tensile analysis, differential scanning calorimetry (DSC), thermogravimetric analysis (DTG/TGA) and melt rheological analysis were used to investigate the structure and properties of the g-TTCP/PBS composites. The results revealed that l-lactide could be grafted onto the surface of TTCP, and the g-TTCP/PBS composites showed the best mechanical properties when the content of g-TTCP was 10 wt%. The crystallization temperature of g-TTCP/PBS composites tended to increase with the increase of g-TTCP contents. The functionalized particles played an important role in augmenting the thermal degradation rate and the complex viscosity of the composites due to their unique structure and the reasonable interfacial interaction between the particles and PBS matrix.     

The Flame Retardancy,Thermal Properties,and Degradation Mechanism of Zinc Alginate Films

The coordination structure, flame retardancy, thermal stabilities, and degradation mechanism of zinc alginate films were studied by Fourier transform infrared spectroscopy (FTIR), limiting oxygen index (LOI), vertical burning (UL-94), and thermogravimetric analysis (TGA) tests. The FTIR results showed that the structure of zinc alginate was correlated to its bidentate bridging coordination. The LOI (49.3) and UL-94 (V-0 rating) results indicated that zinc alginate was an inherent flame retardant material. The TG results showed that zinc alginate had better thermal stabilities than sodium alginate in the lower temperature zones; however, the thermal stabilities of zinc alginate were worse than those of sodium alginate at higher temperatures because of the decomposition of zinc oxalate formed in the degradation process of zinc alginate. Based on the TG results and FTIR of the residues at different temperatures, the effect of zinc ions on the degradation process of alginate was different from that of sodium ions. The zinc ions can catalyze alginate to form the residues and increase the amount of the residues, finally forming zinc oxide. Further, it could decrease the release of flammable gases and increase the flame retardancy of alginate.     

Synergistic Effect Between Organically Modified Montmorillonite and Ammonium Polyphosphate on Thermal and Flame-Retardant Properties of Poly(Butyl Acrylate/Vinyl Acetate) Copolymer Latex

Hexadecyl trimethyl ammonium bromide modified montmorillonite (1631-MMT) was successfully synthesized via an ion exchange reaction and characterized through Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD). Various poly(butyl acrylate/vinyl acetate) P(BA-VAc) copolymer P(BA-VAc)/1631-MMT emulsions were prepared via in-situ polymerization method using potassium persulphate (K₂S₂O₈, KPS) as an initiator. Ammonium polyphosphate (APP) was introduced for obtaining P(BA-VAc)/APP/1631-MMT flame-retardant latex. The flame retardancy and thermal behavior of the latex films were investigated through limiting oxygen index (LOI) and vertical burning test (UL-94) and thermo-gravimetric analysis (TGA/DTA [differential thermal analysis]) analysis. Compared with the P(BA-VAc)/APP composite, the LOI value of P(BA-VAc)/APP/1631-MMT sample was increased from 27.7 to 30.3 with a concentration of 1631-MMT 0.5 wt% in composition, and its UL-94 was raised to V-0 from no rating. TG date showed that the amount of residues increased significantly when 1631-MMT was added. The morphology and microstructure of the residues generated during LOI testing were investigated by scanning electron microscopy (SEM). The outer surface of the P(BA-VAc)/APP/1631-MMT charred layer was more continuous and compact than that of P(BA-VAc)/APP.     

Mechanical and Thermal Properties of Polypropylene/Silica Aerogel Composites

Polypropylene (PP) composites including various amounts of silica aerogel (SA) microparticles were prepared by melt mixing in an internal mixer. The morphology and microstructure of the prepared composites were investigated by scanning electron microscopy (SEM). Mechanical properties of the samples, including elastic modulus, tensile stress, elongation and stress at break, were measured by tensile tests. In addition, the other mechanical features, including Izod impact strength, hardness and wear resistance, were evaluated and then related to the structure of the PP/SA composites. Furthermore, the thermal characteristics of the composites, such as heat deflection temperature and thermal stability, were studied by thermal gravimetric analysis (TGA). The SEM photographs indicated the satisfactory SA particles dispersion for the compositions of 1% and 3% but agglomeration of the aerogels at higher SA contents. Since the composites became stiffer, the impact and tensile strength decreased. The addition of the SA to the PP matrix yielded harder samples with lower weight loss and coefficients of friction in wear tests. The TGA evaluations confirmed that the presence of SA promoted and upgraded the thermal stability and heat deflection temperature of PP. The thermal results proved the superior potential of PP as an insulator when the SA particles were added.     

Assessment of the Microstructure and Mechanical Properties of Polycarbonate (PC)/Acrylonitrile Butadiene Rubber (NBR) Blends Reinforced with Multi-wall Carbon Nanotubes

Abstract

A series of polycarbonate (PC)/acrilonitrile butadiene rubber (NBR)/multi-wall carbon nanotube (MWCNT) nanocomposites were prepared via melt compounding in an internal mixer. The effect of the MWCNT content on the morphology and the thermal and mechanical properties of the prepared nanocomposites were studied. The morphologies of the samples were investigated by field-emission scanning electron microscopy (FESEM) and the thermal properties by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The tensile mechanical results of the nanocomposites showed a decrease in elongation at break with an increase of only 2?wt% of MWCNT content in the PC/NBR blends, and an increasing value in elastic modulus and tensile strength of the nanocomposites. The FESEM images showed that the MWCNTs had good affinity with the polymers and no compatibilizer was needed for making the nanocomposites. The DSC and TGA results showed an increase in thermal stability with addition of MWCNTs because of the more thermally stable carbon nanotubes particles which was uniformly dispersed within the nanocomposites.