Study of Miscibility in Polymer Blends Obtained from Binary Inclusion Complexes of γ-Cyclodextrin and Polycarbonate/Poly(Ethylene Terephthalate)

In this work the synthesis and characterization of the nanostructure of polymer blends of polycarbonate (PC) and poly(ethylene terephthalate) (PET) obtained from their inclusion complexes with γ-cyclodextrin are reported. The blends prepared by this method present differences in their miscibility compared with those blends obtained by conventional methods like solution casting, coprecipitation, or melt blending. In order to understand the influence of molecular weight in the inclusion complex process, PCs of M_w = 64,000 and 28,000 g/mol were used. The analysis of the nanostructured blend by Fourier transform infrared (FTIR), ¹H-nuclear magnetic resonance (¹H-NMR), wide-angle X-ray diffraction (WAXD), differential scanning colorimetry (DSC), and thermogravimetric analysis (TGA) suggests the existence of specific intermolecular interactions between PC and PET that promote miscibility in this normally immiscible polymer blend. Studies by FTIR confirm that the miscibility found was not due to a transesterification reaction during DSC analysis. There were also differences in the morphology of the blends, observed by optical microscopy, obtaining a more homogeneous phase for blends formed in inclusion complexes. The results obtained strongly suggest an improvement in miscibility of the PC/PET blends.     

Thin-layer chromatography of copolyesters from blends of poly(ethylene terephthalate)/polycarbonate

Copolymers made by ester exchange reaction have been obtained from poly(ethylene terephthalate) (PET)/poly(bis-phenol-A carbonate) (PC) blends during melt mixing. The copolyesters were isolated by thin-layer chromatography (TLC) and identified by infrared spectroscopy. It was found that the quantity of copolymer formed was increased by the temperature and duration of melt mixing. The PET/PC blend was found to react at 270°C within 10 min, as detected by TLC. After 60 min, the pure PC had disappeared. The miscibility of PET/PC blends was found to be markedly aided by the addition of as little as 2% of the copolymer isolated by TLC.     

Rheological,thermal, and mechanical properties of poly(ethylene naphthalate)/poly(ethylene terephthalate) blends

Structural, Theological, thermal, and mechanical properties of blends of poly(ethylene naphthalate) (PEN) and poly(ethylene terephthalate) (PET) obtained by melt blending were investigated using capillary rheometry, differential scanning calorimetry (DSC), scanning electron microscopic (SEM) observation, tensile testing. X-ray diffraction, and ¹H nuclear magnetic resonance (NMR) measurements. The melt Theological behavior of the PEN/PET blends was very similar to that of the two parent polymers. The melt viscosity of the blends was between that of PEN and that of PET. Thermal properties and NMR measurement of the blends revealed that PEN is partially miscible with PET in the as molded blends, indicating that an interchange reaction occurs to some extent on melt processing. The blend of 50/50 PEN/PET was more difficult to crystallize compared with blends of other PEN/PET ratios. The blends, once melted during DSC measurements, almost never showed cold crystallization and subsequent melting and definitely exhibited a single glass transition temperature between those of PEN and PET during a reheating run. Improvement of the miscibility between PEN and PET with melting is mostly due to an increase in transesterification. The tensile modulus of the PEN/PET blend strands had a low value, reflecting amorphous structures of the blends, while tensile strength at the yield point increased linearly with increasing PEN content.     

BLENDS OF THERMOTROPIC LIQUID CRYSTALLINE POLYESTER AND POLY(ETHYLENE TEREPHTHALATE)

Two kinds of blends of thermotropic liquid crystalline polymers (LCPs) and poly(ethylene terephthalate) (PET) were prepared by solution and melt blending, respectively. Crystallization behavior of the blends was observed by differential scanning calorimetry (DSC). The LCP in both blends considerably decreased the cold crystallization temperature of PET and increased the crystallization rate in the low-temperature region, but did not show any significant effect on crystallization in the high-temperature region. Phase behavior of samples prepared by melt blending was investigated with the scanning electronic microscope (SEM). It was found that LCP/PET blends display a biphasic structure with an aromatic unit-rich phase as a dispersed domain, and a highly oriented fibrous structure was formed on the fracture surface of the blends. During the melt blending process, PET reacted with LCP through transesterification, as indicated by both DSC and SEM measurements.     

A Study on Properties of Poly(vinyl chloride)/Poly(α-methylstyrene-acrylonitrile) Binary Blends

Blends of poly(vinyl chloride) (PVC) and poly(α-methylstyrene-acrylonitrile) (α-MSAN) with variable composition of 0 to 100 wt% were prepared by melt mixing. Properties of binary blends were extensively studied by differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR), heat distortion temperature (HDT), mechanical properties, melt flow rate (MFR), and scanning electron microscope (SEM). A single glass transition temperature (T_g ) was observed by DSC and DMTA, indicating miscibility between PVC and α-MSAN. The results of ATR-FTIR indicated that specific strong interactions were not present in the blends and the miscibility was due to interaction between –CN and PVC. With increasing amount of α-MSAN, considerable increase occurred in HDT, flexural strength, and flexural modulus compared with reverse s-shaped decrease in impact strength and elongation at break. Synergism was observed in tensile strength and MFR. No phase separation was observed in SEM photographs, indicating miscibility between PVC and α-MSAN. In addition, morphology of the impact-fractured surfaces, including roughness and non-fused particles, correlated well with the mechanical properties and MFR.     

Isothermal Crystallization and Miscibility of Isotactic Polypropylene/Poly(cis-butadiene) Rubber Blends

Isotactic polypropylene/poly(cis-butadiene) rubber (iPP/PcBR) blends were prepared by melt mixing. Isothermal crystallization and miscibility for neat iPP and blends of iPP/PcBR were investigated by differential scanning calorimetry. The presence of PcBR remarkably affected isothermal crystalline behaviors of iPP. An addition of PcBR caused shorter crystallization time and a faster overall crystallization rate, meaning a heterogeneous nucleation effect of PcBR upon crystallization of iPP. For the same sample, the crystallization peak was broader and the supercooling decreased as the crystallization temperature increased. The Avrami equation was suitable to describe the primary isothermal crystallization process of iPP and blends. The addition of PcBR led to an increase of values of the Avrami exponent n, which we suggest was because the blends had a stronger trend of instantaneous three-dimensional growth than neat iPP. The equilibrium melting point depression of the blends was observed, indicating that the blends were partly miscible in the melt.     

Nanostructured Thermosetting Blends of Phenolic Thermosets and Poly(ethylene oxide)‐block‐poly(propylene oxide)‐block‐poly(ethylene oxide) Triblock Copolymer

The amphiphilic triblock copolymer, poly(ethylene oxide)‐block‐poly(propylene oxide)‐block‐poly(ethylene oxide) (PEO‐b‐PPO‐b‐PEO) was incorporated into novolac resin to prepare thermosetting blends. The morphology of the thermosetting blends was investigated by means of atomic force microscopy (AFM) and small‐angle x‐ray scattering (SAXS) and the nanostructures were obtained. It was identified that the reaction‐induced phase separation occurred in the blends of phenolic thermosets with the model poly(propylene oxide) (PPO), whereas poly(ethylene oxide) (PEO) was miscible with novolac resin after and before the curing reaction. In terms of miscibility and phase behavior of the subchains of the triblock copolymer with novolac resin, it was demonstrated that the formation of nanostructures in the thermosets followed a mechanism of reaction‐induced microphase separation.     

Miscibility and Isothermal Crystallization Behavior of Poly (Butylene Succinate-co-Adipate) (PBSA)/Poly (Trimethylene Carbonate) (PTMC) Blends

Poly(butylene succinate-co-adipate) (PBSA)/poly (trimethylene carbonate) (PTMC) blend samples with different weight ratios were prepared by solution blending. The morphologies after isothermal crystallization and in the melt were observed by optical microscopy (OM). Differential scanning calorimetry (DSC) was used to characterize the isothermal crystallization kinetics and melting behaviors. According to the OM image before and after melting, it was found that the blends formed heterogenous morphologies. When the PTMC content was low (20%), PBSA formed the continuous phase, while when the PTMC contents was high (40%), PBSA formed the dispersed phase. The glass transition temperatures (T_g) of the blends were determined by DSC and the differences of the T_g values were smaller than the difference between those of pure PBSA and PTMC. In addition, the equilibrium melting points were depressed in the blends. According to these results, the PBSA/PTMC blends were determined as being partially miscible blends. The crystallization kinetics was investigated according to the Avrami equation. It was found that the incorporation of PTMC did not change the crystallization mechanism of PBSA. However, the crystallization rate decreased with the increase of PTMC contents. The change of crystallization kinetics is related with the existences of amorphous PTMC, the partial miscibility between PLLA and PTMC, and the changes of phase structures.     

Miscibility Determination in Poly(ε-caprolactone)/Poly(Vinyl Formal) Blend by Equilibrium Melting Temperature and Spherulite Morphology

Miscibility of poly(ε-caprolactone), (PCL), containing 1, 5, and 10 wt.% poly(vinyl formal) (PVF) blends was investigated by polarized optical microscopy (POM), atomic force microscopy (AFM), and differential scanning calorimetry (DSC) for spherulitic morphology and equilibrium melting temperature (T°_m, via Hoffman-Weeks plot). The T°_m of PCL in the blends was similar to that of pure PCL, indicating immiscibility. Isothermally, melt crystallized virgin PCL between 30°C and 50°C showed spherulitic morphology with negative birefringence, Maltese cross, and without extinction rings. The nucleation and growth rates of PCL spherulites were found to be dramatically reduced with the addition of PVF. Extinction rings and a change in the sign of the birefringence of the PCL spherulites were observed and were found to be dependent on blend composition and crystallization temperature. The presence of a ring pattern in spherulites was an indication of miscibility between the two polymers that had failed to be detected by thermal methods. The formation of a ring pattern is discussed in terms of lamella twisting originating from a change in the crystallization mechanism.     

Microstructures and Mechanical Properties of Poly(Trimethylene Terephthalate)/Maleic Anhydride Grafted Poly(Ethylene-octene)/Polypropylene Blends

A range of blends based on 70 wt% of poly(trimethylene terephthalate) PTT with 30 wt% dispersed phase were produced via melt blending. The dispersed phase composition was varied from pure maleic anhydride grafted poly(ethylene-octene) (POE-g-MA) over a range of POE-g-MA:polypropylene (PP) ratios. The micromorphology and mechanical properties of the ternary blends were investigated. The results indicated that the domains of the POE-g-MA are dispersed in the PTT matrix, and at the same time the POE-g-MA encapsulate the PP domains. The interfacial reaction between the hydroxyl-end group of PTT and maleic anhydride (MA) during melt blending changes the formation from “isolated formation” to “capsule formation,” where the PP domains are encapsulated by POE-g-MA. Compared to the PTT/POE-g-MA blends, mechanical properties of ternary blends, such as tensile strength and Young's modulus, were improved significantly.     

Structure and Properties of In-Situ Reactive Compatibilized Polypropylene/Poly (Butyl Methacrylate-Co-Hydroxyethyl Methacrylate) Blend Fibers

In this study, in-situ compatibilized polymer blends of polypropylene (PP) and poly (butyl methacrylate-co-hydroxyethyl methacrylate) P(BMA-co-HEMA) were prepared in a corotating twin screw extruder through the reactive extrusion of mixtures of PP, P(BMA-co-HEMA), butyl methacrylate, and benzoyl peroxide. In the process of reactive extrusion, butyl methacrylate and benzoyl peroxide were used as the monomer and the initiator, respectively. Thereafter the polymer blend was made into fibers via melt spinning. The miscibility of PP and P(BMA-co-HEMA) in the blend fibers was investigated using field emission scanning electron microscopy. The absorption percentage of the blend fibers for organic liquids and their remaining ratios after the absorption tests were also determined and used to prove the generation of the third phase. The changes in the fiber morphology during organic liquid absorption were observed using polarized light microscopy. In addition, the effect of the miscibility on the crystal structure and melting characteristic of the blend fibers were analyzed using wide-angle X-ray diffractometry and differential scanning calorimetry. Finally, the thermal stability of the blend fibers that was associated with the miscibility of PP and P(BMA-co-HEMA) in the blend fibers were characterized by using thermogravimetry and dynamic thermomechanical analysis.     

Effect of Unplasticized Poly Vinyl Chloride (UPVC) Molecular Weight and Graft-Acrylonitrile-Butadiene-Styrene (g-ABS) Content on Compatibility and Izod Impact Strength of UPVC/g-ABS Blends

In this study three grades of rigid poly vinyl chloride (PVC) having different molar masses were melt blended with graft-acrylonitrile-butadiene-styrene (g-ABS) in different compositions. The effect of PVC molecular weight and g-ABS composition on the compatibility and Izod impact strength of the blends were investigated. Differential scanning calorimetry (DSC) results showed a single glass transition temperature (T_g) for all the blends, representative of miscibility between the PVC phase and the styrene-acrylonitrile copolymer (SAN) phase of g-ABS which, in turn, led to compatibility of the PVC/g-ABS blends. It was observed that in all the PVC grades the blends Izod impact strength increased with increasing g-ABS content. Also, at a given composition of g-ABS, by increasing the molecular weight of the PVC phase the impact strength of the blends increased. The morphology of the fracture surfaces from the impact tests were analyzed using scanning electron microscopy (SEM) micrographs and the results showed that with increasing g-ABS content in the blend, cloudy regions increased and eventually begin to overlap each other, and the deformed material on the fracture surfaces increased. This was attributed to the blend compatibility causing greater energy dissipation in the fracture process.     

Miscibility,Morphology, and Thermal Properties of Poly(Trimethylene Terephthalate)/Polycarbonate

Abstract

Poly(trimethylene terephthalate)/polycarbonate (PTT/PC) blends were prepared by melt blending and rapid quenching in ice water. The miscibility and thermal properties were investigated using differential scanning calorimeter (DSC) and dynamic mechanical analysis (DMA). The blend's morphologies were investigated using scanning and transmission electron microscopies. Both DSC and DMA results suggested that PTT and PC were very limited, partially miscible pairs. The melting point, melt crystallization, and cold crystallization exotherms in the blends of PTT were depressed by the presence and amount of PC. When the PC content was <50 wt%, PC spherical particles were found to distribute evenly in the PTT matrix; at 50–60 wt%, the two‐phase structures were close to being bicontinuous. At higher PC content, PTT formed a string‐like texture in the PC matrix. The PTT spherulitic morphologies in PTT/PC blends were found to be very sensitive to PC and PC content. When the PC content was ≥60 wt%, the blends crystallized as an agglomeration of tiny PTT crystals.     

Transesterification-Induced Evolution of Structure and Morphology in Poly(trimethylene terephthalate)/Poly(butylenes succinate) Blends

The evolution of the structure and morphology in poly(trimethylene terephthalate)/poly(butylene succinate) (PTT/PBS) blends induced by transesterification between PTT and PBS at different blending temperatures for 2 h and various times at 270°C was investigated. By control of the extent of transesterification, the degree of randomness, crystallization, morphology, and tensile properties of the blends could be modulated. The results indicated that the degree of randomness of the blends increased by increasing the blending temperature above 260°C and blending time, leading to the formation of copolyesters. The crystallization of the blends was restricted by the increase of blending temperature and time, shown by broad reflection peaks in X-ray spectra and less perfect spherulites as observed by polarized optical microscopy (POM), which was due to the increase of the degree of randomness. The elongation at break increased by increasing the blending time and temperature, accompanied by a decrease of tensile strength and elastic modulus, showing a dependence on the degree of randomness caused by the transesterification.     

Miscibility, Crystallization, and Rheological Behavior of Solution Casting Poly(3-hydroxybutyrate)/poly(ethylene succinate) Blends Probed by Differential Scanning Calorimetry, Rheology, and Optical Microscope Techniques

应用差示扫描量热、流变及偏光显微镜等方法研究了聚3-羟基丁酸酯/聚丁二酸乙二醇酯(PHB/PES)共混体系的相容性、结晶和流变行为．相图显示该共混体系有两个玻璃化转变,但PHB的熔点随其含量的减少而降低,这个结果证明该共混体系是部分相容的,同时应用偏光显微镜观察体系结晶形态的发展证实了这个结论．依赖于结晶温度和组成,PHB和PES能同时结晶,也能分步结晶,且PHB的球晶生长速率随PES含量的增加而增大．对于部分相容的聚合物共混体系,共混组成对球晶生长速率的影响也做了详细地讨论．     

Molecular dynamics of poly(ethylene 2,6-naphthalate)-polycarbonate composite by nuclear magnetic resonance

The aim of the work was to examine molecular dynamics of a series of poly(ethylene 2,6-naphthalate)-polycarbonate blends with changing weight ratio of copolymers by off-resonance nuclear magnetic resonance technique. It was shown that this technique provides information about the correlation times of the internal motions. The spectral density function amplitudes were estimated on the basis of the dispersion of the spin-lattice relaxation time off-resonanceT _lp^off. The measurements were performed for two series of blends which had been injection moulded with and without compatibilizer. The new polymer materials were also characterized using differential scanning calorimetry. Samples obtained after injection moulding and annealing became amorphous, which indicates that a reaction of transesterification process between the two polymers occurred.     

An analysis of flow-induced miscibility of polymer blends

The phase behavior of blends of polystyrene and poly(vinyl methyl ether) undergoing shearing flow was examined. Experiments conducted at a constant level of flow-induced strain found that such flow elevates the phase boundary and pro-motes miscibility. In the framework of the Cahn-Hilliard model for spinodal decomposition, an expression was developed which predicts the effect of an external flow field on the spinodal. The basis for this expression is the minimization of strain energy in a two-component polymer system that is in a thermodynamic state near its phase-separation point. The zero shear viscosities of the blends were measured and demonstrated to be an indication of one- or two-phase flow.     

Confined crystallization in phase-separated poly(ethylene terephthalate)/poly(ethylene naphthalene 2,6-dicarboxilate) blends

The isothermal cold crystallization of poly(ethylene terephthalate)(PET) in cryogenic mechanical alloyed blends of PET and Poly(ethylene naphthalene 2,6-dicarboxilate)(PEN) 1:1 by weight has been investigated by simultaneous small and wide angle X-ray scattering (SAXS and WAXS) and dielectric spectroscopy (DS). For transesterification levels higher than 23% the blends tend to transform into a one-phase system and the crystallization of PET is strongly inhibited due to the significant reduction of the PET segment length. For lower levels of transesterification the blends are phase separated and the overall crystallization behaviour can be explained considering the confined nature of the PET domains in these blends. The formation of a rigid amorphous phase in the intra-lamellar stack amorphous regions is reduced in the blends due to a lower probability of stack formation in the confined PET-rich domains. The more effective filling of the space by the lamellar crystals in the blends provokes a stronger restriction to the amorphous phase mobility of PET in the blends than in pure PET.     

Poly(butylene terephthalate)/phenoxy blends: Synergistic behavior in mechanical properties

The mechanical properties of miscible poly(butylene terephthalate) (PBT)/poly (hydroxy ether of bisphenol A) (phenoxy) blends obtained by melt mixing have been studied by means of the tensile test. The crystallinity of the blends has been studied by means of DSC and density measurements. A synergistic behavior, principally in the break properties, at high PBT contents in the blends is observed. As can be seen from the torque and density data, this synergistic behavior is related with the high level of miscibility which seems to exist at high PBT contents compared with that of the high phenoxy content region.     

Miscibility,Crystallization, and Morphology of the Double-Crystalline Blends of Insulating Polyethylene and Semiconducting Poly(3-Butylthiophene)

A series of crystalline semiconducting poly(3-butylthiophene) (P3BT)/crystalline insulating polyethylene (PE) blends were prepared and the miscibility, crystallization, and structure/morphology were investigated. Even though phase separation was observed by transmission electron microscopy (TEM) and small-angle X-ray scattering (SAXS), several pieces of evidence indicated that limited miscibility should be present in PE/P3BT blends: small changes in both T_m and crystallinity of PE phase and a small portion of PE being dissolved in P3BT. The study of PE isothermal crystallization kinetics revealed that the introduction of P3BT significantly influenced the nucleation mechanism and growth geometry, i.e., PE was transformed from three-dimensional (3D) spherulitic to two-dimensional (2D) disc crystals. A striking reduction of nucleation density and an obvious ringed morphology of PE spherulites (2D) in PE/P3BT blends were also observed by polarized optical microscopy; it is proposed that the limited miscibility between PE and crystalline P3BT favors the formation of ringed PE spherulite in the blends. Additionally, preferred orientation of PE lamellae, with their b-axis largely constrained to the thin film plane, was observed by X-ray diffraction in PE/P3BT blend films. It is evidenced that the PE orientation was due to the b-axis being the crystal growth direction, which can only be in film plane.