Triarylamine N‐functionalized 3,6‐linked carbazole main chain polymers and copolymers: Preparation and physical properties

The preparation of triarylamine N‐functionalized 3,6‐linked carbazole homopolymers as well as alternating copolymers with 2,5‐diphenyl‐[1,3,4]oxadiazole and benzo[1,2,5]thiadiazole was undertaken using Suzuki cross‐coupling polymerization procedures associating 3,6‐bis(4,4,5,5‐tetramethyl‐[1,3,2]dioxaborolan‐2‐yl)‐9‐(bis[4‐(2‐butyl‐octyloxy)‐phenyl]‐amino‐phen‐4‐yl)‐carbazole and, respectively, 3,6‐dibromo‐9‐(bis[4‐(2‐butyl‐octyloxy)‐phenyl]‐amino‐phen‐4‐yl)‐carbazole, 2,5‐bis(4‐bromo‐phenyl)‐[1, 3,4]oxadiazole, and 4,7‐dibromo‐benzo[1,2,5]thiadiazole. Both the carbazole homopolymer and alternating copolymer with 2,5‐diphenyl‐[1,3,4]oxadiazole were found as wideband gap materials emitting in the blue part of the electromagnetic spectrum while the carbazole alternating copolymer with 4,7‐benzo[1,2,5]thiadiazole had a narrower band gap and emitted in the orange part of the electromagnetic spectrum. The new polymers are thermally stable up to 300 °C. A discussion of the electrochemical and optical properties of the new polymers is presented. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5957–5967, 2007.     

Aromatic copolyimide–amides II

Six thermally stable polyimide-co-amides have been synthesized from sulfurylbis[N-(4′-phenylene)-4-(chloroformyl)-phthalimide] and various aromatic diamines. Linear, high molecular weight final polymers were obtained by one step low-temperature solution condensations in dimethylacetamide. Thermal properties such as glass transition and polymer decomposition temperatures and solution properties such as viscosities and solubilities varied significantly with polymer structure. Tough, flexible films of these polymers were cast from solution. The thermal-oxidative stabilities of films were strongly dependent on structure, solvents used, and impurities present.     

Note Synthesis of New Poly(Amide-Hydrazide)s

Poly(amide-hydrazide)s were originally developed to give fibers of high modulus and high strength [1]. They were generally prepared 1) from dicarboxylic acid chlorides and aminohydrazides by low-temperature polycondensation [2,3]; 2) by the phosphorylation method [4, 5]; and 3) from dihydrazides with preformed amide linkages by low-temperature polycondensation [6]. These polymers were found to be thermally stable, but they showed poor solubility in polar aprotic solvents. In this paper we report the synthesis and characterization of some new poly(amide-hydrazide)s with azo groups in the backbone, which were introduced to improve solubility.     

Modulating the Nucleated Self‐Assembly of Tri‐β3‐Peptides Using Cucurbit[n]urils

The modulation of the hierarchical nucleated self‐assembly of tri‐β³‐peptides has been studied. β³‐Tyrosine provided a handle to control the assembly process through host‐guest interactions with CB[7] and CB[8]. By varying the cavity size from CB[7] to CB[8] distinct phases of assembling tri‐β³‐peptides were arrested. Given the limited size of the CB[7] cavity, only one aromatic β³‐tyrosine can be simultaneously hosted and, hence, CB[7] was primarily acting as an inhibitor of self‐assembly. In strong contrast, the larger CB[8] can form a ternary complex with two aromatic amino acids and hence CB[8] was acting primarily as cross‐linker of multiple fibers and promoting the formation of larger aggregates. General insights on modulating supramolecular assembly can lead to new ways to introduce functionality in supramolecular polymers.     

Polymerization of aromation amines with ferric chloride to produce thermally stable polymers

Simple aromatic amines have been polymerized by use of ferric chloride as a combined Friedel-Crafts catalyst and oxidant to yield polymers which are both thermally and oxidatively stable. Under certain reaction conditions a polydiphenylamine was prepared which was stable in air up to 465°C as shown by thermogravimetric analysis. This polymer has a softening point of ca. 80–100°C and is soluble in some organic solvents. Such a polydiphenylamine and other polymers with similar properties are regarded as useful for conversion to thermally stable Phillips-type resins by crosslinking with conventional difunctional agents.     

Thermally stable polymers based on 1,3,4-oxadiazole rings

<正>In the present work,new thermally stable polymers containing 1,3,4-oxadiazole units have been synthesized through Huisgen reaction of the aromatic bis-tetrazole compounds with the aromatic/aliphatic bis-acid chlorides in pyridine as solvent.The obtained polymers are insoluble or slightly soluble in polar aprotic solvents such as DMSO and DMF. Thermal analyses of the polymers using DSC and TGA techniques showed that the polymers had improved thermal stabilities.The model reaction was also investigated and the resulting bis-l,3,4-oxadiazole compounds were characterized by conventional spectroscopic methods.     

Thermally resistant polymers containing the s-triazine ring

Aromatic dinitriles cyclize to form aromatic polymers containing the s-triazine ring. In this paper, these polymers are compared thermally with each other and with aromatic melamine polymers prepared via the aromatic diamine and cyanuric chloride. One perfluoroaromatic melamine polymer was prepared and compared with the other two types of polymers. The polymers (triazines and melamine) in which biphenyl was the backbone were increasingly stable up to 1000°C. in nitrogen. The triazine polymers as a group were the most stable. The perfluoroaromatic polymer was the most stable melamine up to 500°C. in air but was very unstable above 700°C.     

Synthesis,characterization, and thermal properties of novel arylene sulfone ether polyimides and polyamides

A new aromatic sulfone ether diamine was synthesized by nucleophilic aromatic substitution reaction of 5‐amino‐1‐naphthol with bis(4‐chlorophenyl) sulfone in the presence of potassium carbonate in a polar aprotic solvent. Polycondensation reactions of the obtained diamine with pyromellitic dianhydride (PMDA), benzophenonetetracarboxylic dianhydride (BTDA), and hexafluoroisopropylidene diphthalic anhydride (6FDA) resulted in preparation of thermally stable poly(sulfone ether imide)s. Poly(sulfone ether amide)s also were prepared by reaction of the diamine with terephthaloyl chloride (TPC) and isophthaloyl chloride (IPC). The prepared monomer and polymers were characterized by conventional methods. Physical and mechanical properties of polymers, including thermal stability, thermal behavior, solution viscosity, solubility behavior, and modulus, also were studied. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1487–1492, 2000     

Preparation and characterization of aromatic polyamides based on a bis(ether‐carboxylic acid) or a dietheramine extended from 1,1‐bis(4‐hydroxyphenyl)‐1‐phenylethane

Thermoplastic and organic‐soluble aromatic polyamides containing both bulky triphenylethane units and flexible ether linkages were prepared directly from 1,1‐bis[4‐(4‐carboxyphenoxy)phenyl]‐1‐phenylethane ( III ) with various aromatic diamines or from 1,1‐bis[4‐(4‐aminophenoxy)phenyl]‐1‐phenylethane ( V ) with various aromatic dicarboxylic diacids via triphenyl phosphite and pyridine. These polyamides had inherent viscosities ranging from 0.71 to 1.77 dL/g. All the polymers easily were dissolved in aprotic polar solvents such as N‐methyl‐2‐pyrrolidone and N,N‐dimethylacetamide, and some even could be dissolved in less polar solvents such as tetrahydrofuran. The flexible and tough films cast from the polymer solutions possessed tensile strengths of 89 to 104 MPa. The polyamides were thermally stable up to 460°C in air or nitrogen. Glass‐transition temperatures of these polyamides were observed in a range of 179 to 268°C via differential scanning calorimetry or thermomechanical analysis. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 247–260, 2000     

Thermally stable polymers containing 1,3,4-oxadiazole units obtained from Huisgen reaction

Thermally stable polymers containing 1,3,4-oxadiazole units have been synthesized through Huisgen reaction of the aromatic/aliphatic bis-tetrazole compounds with the aromatic/aliphatic bis-acid chlorides in pyridine as solvent.The obtained polymers are insoluble or slightly soluble even in polar aprotic solvents such as DMSO and DMF.Relatively high inherent viscosity values（0.61-1.33 dL/g,in 0.125%H₂SO₄ at 25℃） were observed for these compounds.Thermal analyses of the polymers using DSC and TGA techniques showed that the polymers have improved thermal stabilities.The glass transition temperature has not been observed in the fully aromatic polymers,but the polymers obtained from 5-[6-（1H-tetrazol -5-yl）hexyl]-lH-tetrazole（Ⅳ） showed very clear T_g.A model reaction was also investigated and the resulting bis-1,3,4-oxadiazole compound was characterized by conventional spectroscopy methods.     

Synthesis and properties of polysulfonamides containing thiophene links

In order to study the synthesis and properties of polysulfonamides containing thiophene links, 2,2-bis(5-chlorosulfonyl-2-thienyl)propane [BCTP], 2,2-bis(5-chlorosulfonyl-2-thienyl)butane [BCTB], 1,1-bis(5-chlorosulfonyl-2-thienyl)cyclohexane [BCTC], and 2,4-dichlorosulfonyl thiophene [DCST] were prepared and interfacial polycondensations with various aliphatic diamines were carried out. The resulting polymers had inherent viscosities in the range of 0.13–0.41 dL/g and showed high extent of moisture absorptions. Most of the polysulfonamides were soluble in electron-donating solvents such as pyridine, DMF, DMSO, NMP, etc. These polysulfonamides exhibited relatively good thermal stabilities. The TGA data revealed 5% weight losses at 275–405°C and residual weights at 500°C were 13–40% under nitrogen. It was also found that dithienyldisulfonyl chlorides produced more thermally stable polymers than DCST, which were comparable to common polysulfonamides from aromatic disulfonyl chlorides.     

Polybenzimidazoles,new thermally stable polymeres

Wholly aromatic polybenzimidazoles were synthesized from aromatic tetraamines and difunctional aromatic acids and characterized as new thermally stable polymers. The melt polycondensation of aromatic tetraamines and the diphenyl esters of aromatic dicarboxylic acids was developed as a general procedure of wide applicability. Polybenzimidazoles containing mixed aromatic units in the chain backbone were prepared from 3,3′-diaminobenzidine, 1,2,4,5-tetraaminobenzene and a variety of aromatic diphenyl dicarboxylates. Phenyl 3,4-diaminobenzoate could also be polymerized by melt condensation to give poly-2,5(6)-benzimidazole. The polymers were characterized by a high degree of stability, showing great resistance to treatment with hydrolytic media and an ability to withstand continued exposure to elevated temperatures. Most of the polymers were infusible, but some had melting points above about 400°C. Many of the polymers exhibited no change in properties on being heated to 550°C, and showed a weight loss of less than 5% when heated under nitrogen for several hours to 600°C. The polymers were soluble in concentrated sulfuric acid and formic acid, producing stable solutions. Many of the polymers were soluble in dimethyl sulfoxide and some also in dimethylformamide. The inherent viscosities of a number of polymers in 0.5% dimethyl sulfoxide solution ranged from approximately 0.4 to 1.1. The higher polymers could be cast into stiff and tough films from formic acid and dimethyl sulfoxide solutions.     

Synthesis and properties of hyperbranched polyamide-esters derived from 1,3,5-tris(4′-hydroxyphenylcarbamoyl)benzene

A novel aromatic triol was synthesized and polycondensed with various diacid chlorides resulting in the preparation of a series of hydroxy-terminated hyperbranched polyamide-esters without gelation. Structure and degree of branching of the ensuing polymers were confirmed by FTIR, ¹H and ¹³C NMR analyses. These thermally stable polymers were found to be soluble in aprotic solvents. Inherent viscosities and T_g values lie in the range of 0.15-0.21 dL/g and 74-112 °C, respectively.     

Zr(HSO4)4‐catalyzed one‐pot three‐component synthesis of 7‐alkyl‐6H,7H‐naphtho[1′,2′:5,6]pyrano[3,2‐c]chromen‐6‐ones

A new, one‐pot, simple thermally efficient and solvent‐free method for the preparation of 7‐alkyl‐6H,7H‐naphtho[1′,2′:5,6]pyrano[3,2‐c]chromen‐6‐ones by condensation of β‐naphthol, aromatic aldehydes, and 4‐hydroxycoumarin using Zr(HSO₄)₄ as a safe and efficient catalyst is described. This method has the advantages of high yields, a cleaner reaction, simple methodology, short reaction times, easy workup, and greener conditions. J. Heterocyclic Chem., (2011).     

A Modified Synthesis of 9-(1,2-Dichlorovinyl)carbazole by Using Crown Ethers and Cryptands in a Non-aqueous System

The 9-[(E)-1,2-dichloroviny1]carbazole is a starting material for synthesis of 9-ethynyl-carbazole [1], which in term is monomer for preparation of photoconductive polymers [2]. Dichlorovinylation of carbazole in a solid-liquid two phase system in the presence of crown and cryptand catalysts has been studied. Application of the Phase Transfer Catalysis in the nonaqueous system increases yield of 9-[(E)-1,2-dichloroviny1]carbazole in comparison to the methods based on liquid-liquid system with benzyltriethylammonium chloride (TEBA) or dimethylsulfoxide (DMSO) as catalysts.     

Synthesis of benzo[g]quinoline derivatives

A method for the synthesis of 3-substituted benzo[g]quinolin-4-ones by the condensation of 1,2,3,4-tetrahydrobenzo[g]quinolin-4-one with aromatic aldehydes in an alkaline medium has been developed. It has been found that the first stage of the reaction is the formation of the corresponding benzylidene derivative, which then isomerizes into the more stable benzyl derivative. The structure of the 3-substituted benzo[g]quinolin-4-ones obtained, as existing in the tautomeric oxo form, is confirmed by their IR and UV spectra.For Communication VI, see [1].Translated from Khimiya Geterotsiklicheskikh Soedinii, Vol. 6, No. 6, pp. 798–801, June, 1970.     

Ultracentrifuge as a Versatile Tool to Study Preferential Interaction of Polymers in Mixed Solvents

Abstract

Over the past five decades the analytical ultracentrifuge has been a versatile tool in the study of macromolecules and colloidal particles. Several textbooks [1–4] and review articles [5–10] deal with experimental techniques and theories for complete characterization of macromolecular species. However, the first published articles on the analytical ultracentrifuge dealt with the analysis of particle size distributions in suspensions of inorganic colloids. The emphasis has now shifted to organic polymers following the discovery that a large number of such polymers exist in nature. Before the development of the ultracentrifuge, the existence of such giant molecules was not recognized; the molecular kinetic units of proteins and of high organic polymers in solution were simply thought of as clusters of much smaller molecules, forming particles of undefined mass. Beginning with the elegant investigations of Svedberg [11, 12] on ultracentrifugation, such substances were revealed to be macromolecules, large because they contain a huge number of atoms connected together by primary chemical bonds [13]. Following a long and fruitful series of investigations in the early twenties and thirties, Svedberg wrote in one of his articles [12], “the proteins are built up of particles possessing the hallmark of individuality and therefore are in reality giant molecules. We have reason to believe that the particles in the protein solutions and the protein crystals are built up according to a plan which makes every atom in them indispensable for the completion of the structure.” Almost at the same time, it was Staudinger [14] who clearly demonstrated that substances such as polystyrene and natural rubber exist in solution without change in molecular weight regardless of the solvent employed .     

Synthesis of Zwitterionic Cobaltocenium Borate and Borata‐alkene Derivatives from a Borole‐Radical Anion

Chemical single‐electron reduction of 1‐mesityl‐2,3,4,5‐tetraphenylborole ( 3 ) gave a stable radical anion [CoCp*₂][ 3 ] as shown in earlier investigations. Herein, we present the reaction of [CoCp*₂][ 3 ] with the 2,2,6,6‐tetramethylpiperidine‐N‐oxyl radical (TEMPO), a common radical trap. Instead of radical recombination, the reaction proceeds through a redox pathway involving oxidation of the borole radical anion combined with reduction of TEMPO. This electron‐transfer process is accompanied by a deprotonation reaction of the cobaltocenium counterion by the base TEMPO^? to give TEMPO‐H and a neutral cobalt(I) fulvene complex ( 7 ). The latter was not observed directly during the reaction, because it instantaneously reacts as a nucleophile attacking at the boron center of the in situ generated borole 3 to give the borate 6 . However, 7 was synthesized independently by deprotonation of [CoCp*₂][PF₆]. In addition, the obtained zwitterionic cobaltocenium borate 6 undergoes a photolytic rearrangement to form the borata‐alkene derivative 9 that thermally transforms to the chiral cobaltocenium borate 12 . Our investigations are based on spectroscopic evidence, X‐ray crystallography, elemental analysis, as well as DFT calculations.     

Synthesis of wholly aromatic polysulfonamides from aromatic disulfonyl chlorides and aromatic diamines

Wholly aromatic polysulfonamides of high molecular weight were prepared by the solution poly-condensation of aromatic disulfonyl chlorides with aromatic diamines in tetramethylene sulfone and substituted pyridines as the acid acceptor. Polysulfonamides with inherent viscosities as high as 1.2 were readily obtained by initiating polycondensation at a temperature of 5–10°C to control the side reactions. The polycondensation was fairly fast and was completed in 10 min at 60°C. All the aromatic polysulfonamides dissolved in a wide range of solvents, including acetone and tetrahydrofuran. These polymers were less thermally stable than the corresponding aromatic polyamides.     

History of Heat-Resistant Polymers

Thermally stable polymers can be traced back to the late 1950s when structures were first synthesized which could exist above 300°C in air. Perhaps the first two types of polymers most significant here were aromatic polyamides and polybenzimidazoles. The latter was important because its discovery opened the field of polyheterocycles as heat-resistant backbone functions. The impetus for this field of study was originally aerospace technology (ablation shields, coatings, and adhesives). Since that time, however, other needs have been filled with these types of polymers: high modulus fibers, flame-proof clothing, and reverse osmosis membranes. These new, unexpected advantages have provided the need for further research to replace the decrease in aerospace efforts. Research has continued, not to find a material which is more thermally stable, but to enable better processing of the polymers at hand. This change is due to a plateau seen in thermal stability (up to 600°C in air and up to 800°C in nitrogen by TGA) and to the poor tractibility observed for early heat-resistant polymers. Inorganic polymers have not been investigated in depth for these applications.