Effect of Stretching on β-Phase Content of Isotactic Polypropylene Melt Containing β-Nucleating Agent

Pure isotactic polypropylene (iPP) and that containing 0.2 wt% of a β-nucleating agent (β-NA) were extruded through a slit die. Simultaneously, the extruded melt was stretched at the die exit with different stretching rates (SR). The change of β-phase content with different SR was investigated by differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (WAXD). The results indicate that, for pure iPP, the content of β-phase first increases with increasing SR till it reaches a maximum and then it gradually decreases. However, for the case of β-nucleated iPP, it decreases monotonously with increasing SR. The spatial confinement is considered as the best explanation for the suppression of β-phase in the nucleated iPP melt upon stretching.     

Effect of β-Nucleating Agent on the Crystallization,Mechanical Properties,and Heat Resistance of Injection-Molded Isotactic Polypropylene

Injection-molded β-isotactic polypropylene (β-iPP) was prepared with a commercial β-nucleating agent (NT-A). The effect of NT-A on the crystallization, mechanical properties, and heat resistance of β-iPP was investigated by differential scanning calorimetry (DSC), wide-angle X-ray diffraction (WAXD), polarized light microscopy (PLM), and mechanical and heat deflection tests. DSC and WAXD analysis showed that the content of β-crystals in the nucleated iPP was higher than that of pure iPP, and the content of β-crystals of the core was higher than that of the skin. PLM observations showed that injection-molded iPP had an obvious skin-core structure. NT-A induced abundant β-crystals and resulted in small spherulites which improved the Izod notched impact strength. When the content of NT-A was 0.075wt%, the Izod notched impact strength reached a maximum, 2.6 times more than that of pure iPP. The heat distortion temperature was also improved by NT-A.     

Vibrational Spectroscopic and Theoretical Studies of Urea Derivatives with Biochemical Interest: N,N′-Dimethylurea,N,N,N′,N′-Tetramethylurea,and N,N′-Dimethylpropyleneurea

Abstract

Mid-infrared, far-infrared, and Raman vibrational spectroscopic studies were combined with density functional theory (DFT) calculations and normal coordinate force field analyses for N,N′-dimethylurea (DMU), N,N,N′,N′-tetramethylurea (TMU), and N,N′-dimethylpropyleneurea (DMPU: IUPAC name 1,3-dimethyltetrahydropyrimidin-2(1H)-one). The equilibrium molecular geometry of DMU (all three conformers), TMU, and DMPU and the frequencies, intensities, and depolarization ratios of their fundamental infrared (IR) and Raman vibrational transitions were obtained by DFT calculations. The vibrational spectra were fully analyzed by normal coordinate methods as well. A starting force field for DMPU was obtained by adapting corresponding force constants for DMU and TMU, resulting after refinements in the stretching force constants C=O (7.69, 7.30, 7.68 N·cm^?1), C–N (5.16, 5.55, 5.05 N·cm^?1), and C-Me (5.93, 4.00, 4.22 N·cm^?1) for DMU, TMU, and DMPU, respectively. The dominating conformer of liquid DMU was identified as trans-trans, strong intermolecular hydrogen bonding was verified in solid DMU, and weak dipole–dipole association was found in liquid TMU and in DMPU. Special attention was paid to analyzing the methyl group frequencies, which revealed deviations from local C_3v symmetry. A linear correlation was found between the CH stretching force constants and the inverse of the CH bond lengths (1/r ²). The averaged NH stretching frequencies of gaseous, dissolved, and solid urea and of DMU, with variations for hydrogen bonding of different strength, are linearly correlated to the NH stretching force constants. Characteristic skeletal vibrations were assigned for a broad variety of urea derivatives and also for pyrimidine derivatives, which all contain the N₂C=O entity. The very strong IR bands of C=O stretching (1,676 ± 40 cm^?1) and asymmetric CN₂ stretching (1,478 ± 60 cm^?1), and the very intense Raman feature of symmetric CN₂ stretching or ring breathing (757 ± 80 cm^?1), can be recognized as fingerprint bands also for the pyrimidine derivatives cytosine, thymine, and uracil, which all are nucleobases in DNA and RNA nucleotides.     

A green non-acid-catalyzed process for direct N=N–C group formation: comprehensive study,modeling, and optimization

The aim of this work is to introduce, model, and optimize a new non-acid-catalyzed system for a direct N\(=\)N–C bond formation. By reacting naphthols or phenol with anilines in the presence of the sodium nitrite as nitrosonium (\(\hbox {NO}^{+})\) source and triethylammonium acetate (TEAA), a N\(=\)N–C group can be formed in non-acid media. Modeling and optimization of the reaction conditions were investigated by response surface method. Sodium nitrite, TEAA, and water were chosen as variables, and reaction yield was also monitored. Analysis of variance indicates that a second-order polynomial model with F value of 35.7, a P value of 0.0001, and regression coefficient of 0.93 is able to predict the response. Based on the model, the optimum process conditions were introduced as 2.2 mmol sodium nitrite, 2.2 mL of TEAA, and 0.5 mL \(\hbox {H}_{2}\hbox {O}\) at room temperature. A quadratic (second-order) polynomial model, by analysis of variance, was able to predict the response for a direct N=N–C group formation. Predicted response values were in good agreement with the experimental values. Electrochemistry studies were done to introduce new Michael acceptor moieties. Broad scope, high yields, short reaction time, and mild conditions are some advantages of the presented method.     

Vibrational Spectra of 2,6-Diphenyl Pyridine, 2,2′:6′,2″-Terpyridine and Meta-terphenyl

The Raman and infrared spectra of 2,6-diphenyl pyridine, m-terphenyl and 2,2′:6′,2″-1erpyridine have been analysed as metadisubstituted benzene or pyridine molecules. Complete vibrational assignment shows that some modes in the case of internal vibrations of substituents appear in pairs. The splitting of these modes have been attributed to the in-and out-of-phase motions arising out of interaction between phenyl or pyridine rings, as the case may be. In the case of meta terphenyl and terpyridine, two probable cases of Fermi resonance have been observed.     

Formation of β-iPP in Isotactic Polypropylene/Acrylonitrile–Butadiene–Styrene Blends: Effect of Resin Type,Phase Composition,and Thermal Condition

The formation of β-iPP (β-modification of isotactic polypropylene) in the iPP/ABS (acrylonitrile–butadiene–styrene), iPP/styrene–butadiene (K resin), and iPP/styrene–acrylonitrile (SAN) blends were studied using differential scanning calorimery (DSC), wide angle X-ray diffraction (WAXD), and scanning electron microscopy (SEM). It was found that α-iPP (α-modification of isotactic polypropylene) and β-iPP can simultaneously form in the iPP/ABS blend, whereas only α-iPP exists in the iPP/K resin and iPP/SAN blend samples. The effects of phase composition and thermal conditions on the β-iPP formation in the iPP/ABS blends were also investigated. The results showed that when the ABS content was low, the ABS dispersed phase distributed in the iPP continuous phase, facilitating the growth of β-iPP, and the maximum amount of β-iPP occurred when the composition of iPP/ABS blend approached 80:20 by weight. Furthermore, it was found that the iPP/ABS blend showed an upper critical temperature T _c * at 130°C for the formation of β-iPP. When the crystallization temperature was higher than the T _c *, the β-iPP did not form. Interestingly, the iPP/ABS blend did not demonstrate the lower critical temperature T _c ** previously reported for pure iPP and its blends. Even if the crystallization temperature decreased to 90°C, there was still β-iPP generation, indicating that ABS has a strong ability to induce the β-iPP. However, the annealing experiments results revealed that annealing in the melt state could eliminate the susceptibility to β-crystallization of iPP.     

Novel molybdenum disulfide nanosheets–decorated polyaniline: Preparation,characterization and enhanced electrocatalytic activity for hydrogen evolution reaction

Novel molybdenum disulfide nanosheets–decorated polyaniline (MoS₂/PANI) was synthesized and investigated as an efficient catalyst for hydrogen evolution reaction (HER). Compared with MoS₂, MoS₂/PANI nanocomposites exhibited higher catalytic activity and lower Tafel slope for HER in H₂SO₄ solution. The amount of 19 wt% PANI for coupling with MoS₂ resulted in a high current density of 80 mA cm⁻² at 400 mV (vs. RHE). In addition, the optimal MoS₂/PANI nanocomposite showed impressive long-term stability even after 500 cycles. The enhanced catalytic activity of MoS₂/PANI nanocomposites was primarily ascribed to the effective electron transport channels of PANI and the increase of electrochemically accessible surface area in composite materials, which was advantageous to facilitate the charge transfer at catalyst/electrolyte interface.     

Tautomerization and solvent effects on the absorption and emission properties of the Schiff base N,N′-bis(salicylidene)-p-phenylenediamine – A TDDFT study

Time-dependent density functional theory combined with a polarized continuum model has been applied to study solvent effects on the geometrical and energetic properties, as well as the absorption and emission properties, of three tautomeric forms of N,N′-bis(salicylidene)-p-phenylenediamine (BSP). The calculated properties are in agreement with the available experimental data. It was observed that the solvent environment does not affect the vertical excitation energies significantly, whereas tautomerization strongly affects both the absorption and emission spectra of BSP.     

A Novel Ultraviolet Irradiation Technique for Fabrication of Polyacrylamide–metal (M = Au,Pd) Nanocomposites at Room Temperature

Polyacrylamide (PAM)–metal (M = gold, palladium) nanocomposites with metal nanoparticles homogeneously dispersed in the polymer matrix have been prepared via a novel ultraviolet irradiation technique at room temperature, which is based on the simultaneous occurrence of photo-reduction formation of the colloidal metal particles and photo-polymerization of the acrylamide (AM) monomer. The UV–vis absorption spectra and TEM were employed to characterize the M-PAM nanocomposites by different irradiation times. The average sizes of the colloidal gold and palladium particles dispersed in the nanocomposites were calculated by XRD patterns and TEM images. The present method may be extended to prepare other metal–polymer hybrid nanocomposite materials.     

Synthesis of a New Thermal and Photostable Reference Probe for Qf Measurement in Aqua: Water Soluble N,N′-bis-(2-Hydroxy-4-benzoic Acid)-3,4,9,10-perylenebis(dicarboximide)

N,N′-bis(2-hydroxy-4-benzoic acid)-3,4,9,10-perylenebis(dicarboximide) is synthesized from perylene 3,4,9,10-tetracarboxylic dianhydride and 4-amino-3-hydroxy benzoic acid in 90% yield. Together with the photostability the dye is also very stable thermally. The fluorescence quantum yield is measured as one, Q_f=1.The diimide dissolves in water at PH = 8 completely. The diimide is an ideal reference probe for fluorescence quantum yield measurements in 500–650 nm region and an attractive photosensitizer for the photoreactions occur in water.     

Ionization potentials and bond lengths for CO,N2, and F2 using the SCF-Xα-SW method: A study of the effect of overlapping spheres

Using a simple, arbitrary, but fixed procedure for the choice of sphere sizes in the overlapping sphere version of the SCF-Xα-SW method, results for the ionization potentials of CO, N₂, F₂, and H₂O are in considerably better agreement with experiment than those of the muffin-tin version. The agreement is as good as those of the SCF-Hartree-Fock, Discrete Variational-Xα, and LCAO-Xα methods. For the first time the overlapping sphere modification has been used to calculate binding curves and results in equilibrium bond lengths for CO, N₂, and F₂ all within 0·3 a ₀ (0·16 Å) of the experimental values, a dramatic improvement over the muffin-tin results. The variation of the calculated ionization potentials under a moderate change in the amount of sphere overlap is found to be rather small, being of the order of the differences between the DV-Xα and LCAO-Xα methods, both of which completely avoid the muffin-tin approximation.     

Mössbauer spectroscopic studies of spin crossover in tris(N, N′-dialkyldithiocarbamato) iron (III) complexes: effect of alkyl substituents

Spin crossover behavior in tris(N,N′-dialkyldithiocarbamato) iron(III) complexes with varying alkyl groups has been studied by variable temperature magnetic moment and Mössbauer spectral studies. All the complexes may be divided into three broad groups; high spin (μ _eff > 4.8 BM), intermediate spin (μ _eff?=?3.5???4.6 BM) and low spin (μ _eff?< 3.2 B.M). Room temperature (RT) Mössbauer spectra exhibit an asymmetric doublet resolved into two doublets corresponding to high and low spin states. Estimated % contributions of HS and LS states and calculated μ _eff were comparable with the experimentally determined values. It has been shown that some complexes undergo spin crossover, ⁶A₁g→²T₂g whereas others exhibit spin transitions ⁶A₁g →⁴T₁g or ⁴T₁g → ²T₂g. IR spectra show characteristic ν _(Fe???S) bands in the region 208–285 (HS) and 311–380 cm^???1 (LS). Nature of alkyl groups affects the spin state.     

A TDDFT study on the hydrogen-bonding effect on ESIPT mechanism for [2,2′-bipyridyl]-3,3′-diol-(H2O) n (n = 0, 1, 2) clusters: single or double?

The excited-state intramolecular proton transfer (ESIPT) mechanisms of [2,2′-bipyridyl]-3,3′-diol (BP(OH)₂) in gas are studied by using density functional theory (DFT) and time-dependent density functional theory (TDDFT) methods. The intramolecular hydrogen bond (H-bond) is strengthened in the first excited-state in view of the structural parameters and infrared (IR) vibrational frequencies. The enhanced intramolecular H-bond is favourable for ESIPT process. The effect of the extra intermolecular H-bond between BP(OH)₂ and water on ESIPT is considered. The potential energy surfaces, molecular electrostatic potential, topological analysis, frontier molecular orbitals, absorption and fluorescence spectra are investigated. Our calculated results show that the intermolecular H-bond enhances the intramolecular H-bond, changes the mechanism and decreases the barrier height of ESIPT process.     

Nonperturbative renormalization of the sine-Gordon/Coulomb gas system for β2<8π: A functional integral approach

A new method of analyzing the divergences of the sine-Gordon/Coulomb gas system is introduced. It is shown that for ²<8 all divergences may be eliminated by a nonperturbative renormalization of the ground-state energy.     

A new TEM method for the characterization of the tertiary γ′ nano-precipitates in a PM disk superalloy: influence of ageing

An original method for characterizing the γ′-phase tertiary precipitates in a Ni-based superalloy manufactured by powder metallurgy is described. This investigation is made using post mortem transmission electron microscopy (TEM). It is based on the analysis of sheared areas within crept specimens, which allows the precipitates revealed by the dislocations in their glide plane to be observed. The characteristics of these nano-precipitates, i.e. their size, their volume fraction and the channel width between them, are determined for two different heat treatments (HTs). The results show a wide distribution of the microstructural parameters for a given HT, but only slight differences between the microstructures produced by the two different HTs. This microstructural information allows a better understanding of the wide variety of the deformation micromechanisms observed during creep at high temperature.     

Ultrasound-assisted assembly of β-lactoglobulin and chlorogenic acid for non covalent nanocomplex: fabrication,characterization and potential biological function

It is essential to understand the ultrasound-induced changes in assembly of proteins and polyphenols into non covalent nanocomplex. β-Lactoglobulin (LG) and chlorogenic acid (CA) with various biological activities can be combined to form food-grade nanocomplexes. This study systematically explored the role of high-intensity ultrasound pretreatment on the binding mechanisms of LG and CA, and the potential biological function for embedding curcumin (Cur). The scanning electron microscopy (SEM) revealed that ultrasound treatment could destroy the structure of LG, and the particle size of the protein was reduced to<50 nm. The change in secondary structure of the protein by ultrasound treatment could be revealed by the fourier transform infrared (FTIR) and fluorescence spectra. Besides, it was found that LG and CA were combined to form a complex under the hydrophobic interaction, and CA was bound in the internal cavity of LG with a relatively extended conformation. The result demonstrated that the ratio of Cur embedded in the ultrasonic sample could be effectively increased by 7% − 10%, the particle size in the emulsion was smaller, and the dispersion was more stable. This work contributes to the development of protein–polyphenol functional emulsion systems with the ability to deliver Cur.