Preparation and Characterization of Nano‐TiO2 Doped Polystyrene Materials by Melt Blending for Inertial Confinement Fusion

Abstract

Nano‐TiO₂ doped polystyrene (PS) materials (TiO₂‐d‐PS) used for inertial confinement fusion (ICF) targets were prepared by means of melt blending. The effect of the pretreatment process, including coupling agents and ultrasonic dispersion on nano‐TiO₂, was studied. Tensile tests were conducted to evaluate the mechanical properties of the TiO₂‐d‐PS materials. Scanning electron microscopy (SEM) combined with energy dispersive spectroscopy (EDS) was used to characterize the degree of dispersion of nano‐TiO₂ in the PS matrix. Transmission electron microscopy (TEM) and dynamic contact angle (DCA) measurements were introduced to demonstrate the surface state of untreated and pretreated nano‐TiO₂. The results showed that coupling agents improved the interfacial adhesion between the PS matrix and dopants; ultrasonic dispersion contributed to the increase in the tensile properties of the TiO₂‐d‐PS materials. The dispersion stability of nano‐TiO₂ powder and the stability of the TiO₂‐d‐PS materials were significantly enhanced through pretreatment, which was supported by the increase in the DCA when the nano‐TiO₂ was pretreated by the coupling agent. The results of SEM and EDS indicated that the nano‐TiO₂ dispersed homogeneously in the PS matrix. The pretreatment process is an effective way to break the aggregation of nano‐TiO₂, which was confirmed by TEM results. Melt blending is a feasible method to prepare PS doped high Z element ICF target materials.     

A Study on the Morphology and Mechanical Properties of PVC/nano‐SiO2 Composites

Three methods were used to modify nano‐SiO₂ particles with various interfaces and interfacial interactions between the particles and Poly(vinyl chloride) (PVC) matrix. The experimental results show that direct surface treatment of nano‐SiO₂ particles with a silane coupling agent (KH‐550) is not effective for improving the mechanical properties of PVC/SiO₂ composites. Both ultrasonic oscillations and high energy vibromilling improve the interfacial interactions between SiO₂ particles and PVC matrix. With these methods, the aggregation of SiO₂ particles was inhibited and a good dispersion of SiO₂ particles in PVC matrix was obtained, which improved the mechanical properties of the PVC/SiO₂ composite. The mechanical properties of the PVC/SiO₂ composite with high energy vibromilling modified SiO₂ particles were remarkably improved. Scanning electronic microscopy (SEM), transmission electronic microscopy (TEM), dynamic mechanical analysis (DMA), and theoretical calculations demonstrate these improvements.     

Effects of coating parameters on the morphology of SiO2-coated TiO2 and the pigmentary properties

SiO₂-coated TiO₂ powders were prepared by the chemical deposition method starting from rutile TiO₂ and Na₂SiO₃. The SiO₂-coated TiO₂ powders were characterized by X-ray photoelectron spectroscopy, Zeta-potential analysis, Fourier transform infrared spectroscopy, and transmission electron microscopy. The evolution of island-like and uniform coating layers was found to depend upon the ratio of Na₂SiO₃ to TiO₂, reaction temperature, and pH. The whiteness and brightness of the SiO₂-coated TiO₂ powders increased in response to an increase in the SiO₂ loading, but there was a maximum value among the light scattering indexes. The SiO₂-coated TiO₂ powders possessed more negative Zeta potentials than the naked TiO₂. The dispersibility of the SiO₂-coated TiO₂ powders with the continuous and uniform SiO₂ coating layers was higher than that of the naked TiO₂ and the SiO₂-coated TiO₂ powders with the island-like SiO₂ coating layers.     

Relationships between surface compositions and properties of surfaces of mixed fumed oxides

Fumed oxides SiO₂/Al₂O₃ (SA), SiO₂/TiO₂ (ST) and Al₂O₃/SiO₂/TiO₂ (AST) at different content of alumina and titania were investigated by one-pass temperature-programmed desorption (OPTPD) time-of-flight mass-spectrometry (TOFMS), Auger electron spectroscopy (AES), NMR, FTIR, thermally stimulated depolarization current (TSDC), microcalorimetry, adsorption of nitrogen, water, (dimethylamino)azobenzene (DMAAB) and metal ions (Pb(II) and Ni(II)). It was shown that all the studied adsorption/desorption and energetic properties of mixed fumed oxides depend strongly on the surface content of alumina (shown as a surface content of aluminum, ) in SA and AST and titania (shown as a surface content of titanium, ) in ST and AST. Many of these properties demonstrate clear correlations with the and values over the total range of alumina and titania content in the materials.     

The surface properties and the activities in catalytic wet air oxidation over CeO2-TiO2 catalysts

No-noble metal CeO₂-TiO₂ catalysts prepared by sol-gel method were developed and examined for catalytic wet air oxidation (CWAO) of acetic acid. The structure of the catalysts was measured by BET, SEM, XRD, XPS and DTA-TG. We investigated the effect of the interactions of Ce and Ti on the structure of CeO₂-TiO₂ catalysts. The mechanisms of the relationships between the different content of Ti and the activity of CeO₂-TiO₂ catalysts were discussed. The results showed that the average crystal size of CeO₂ decreased and the surface areas increased; the low valence of Ce³⁺ increase, and the chemisorbed oxygen slightly decreased with the increase of Ti content on the surface of CeO₂-TiO₂ catalysts. The order of the activity in CWAO of acetic acid followed: Ce/Ti 1/1 > Ce/Ti 3/1 > Ce/Ti 1/3 > Ce/Ti 5/1 > CeO₂ > TiO₂ > no catalyst. In CWAO of acetic acid, the optimal atomic ratio of Ce and Ti was 1, and the highest COD removal was over 64% at 230 °C, 5 MPa and 180 min reaction time over Ce/Ti 1/1 catalyst. The excellent activity and stability of CeO₂-TiO₂ catalysts was observed in our study.     

Concentration effect of Tm on cathodoluminescence properties of SiO2:Tm and SiO2:Ho,Tm systems

Cathodoluminescence (CL) properties of SiO₂ powders activated with thulium (Tm³⁺) and holmium (Ho³⁺) ions prepared by a sol–gel process were investigated. Different molar concentrations of Tm³⁺ co-doped with Ho³⁺ were studied. The 460 nm peak was monitored and the influence of the beam energy and concentration of Tm³⁺ ions on the emission properties of this peak was also monitored. The peculiar behavior whereby the 460 nm emission peak decreases and the increase in the 705 and 865 nm peaks with the increase in the concentration of Tm³⁺ ions is reported. The relationship between the accelerating beam voltage and the CL intensity of the blue emission peak (460 nm peak) is established. Morphology, particle size and optical properties were characterized with Scanning electron microscopy (SEM), UV/VIS Lambda 750 S spectrometer and Auger electron spectroscopy (AES) equipped with Ocean Optics S2000, respectively.     

Fabrication, structure and luminescence properties of polycrystalline Tb-doped Lu2SiO5 films by Pechini sol–gel method

Tb³⁺-doped lutetium oxyorthosilicate (Tb:Lu₂SiO₅, LSO) films have been successfully fabricated on carefully cleaned silicon (1 1 1) substrates by Pechini sol–gel method combined with the spin-coating technique. X-ray diffraction (XRD), photoluminescence (PL) spectra and atomic force microscopy (AFM) were employed to characterize the resultant films. XRD patterns indicated that the films were crystallized into A-type LSO phase at 1000 °C, followed by a phase transition from A-type LSO to B-type LSO occurred at 1100 °C. The AFM observation revealed that the phosphor films were uniform and crack-free, consisting of closely packed grains with an average size of 200–300 nm. The PL spectra showed the characteristic emission ⁵D₄ → ⁷F_J (J = 3–6) for Tb³⁺, The lifetime of Tb³⁺ in Tb:LSO films was 2.33 ms. The effect of heat-treatment temperature on the luminescent properties was also investigated.     

The effect of Si surface nitridation on the interfacial structure and electrical properties of (La2O3)0.5(SiO2)0.5 high-k gate dielectric films

Thermal stability, interfacial structures and electrical properties of amorphous (La₂O₃)_0.5(SiO₂)_0.5 (LSO) films deposited by using pulsed laser deposition (PLD) on Si (1 0 0) and NH₃ nitrided Si (1 0 0) substrates were comparatively investigated. The LSO films keep the amorphous state up to a high annealing temperature of 900 °C. HRTEM observations and XPS analyses showed that the surface nitridation of silicon wafer using NH₃ can result in the formation of the passivation layer, which effectively suppresses the excessive growth of the interfacial layer between LSO film and silicon wafer after high-temperature annealing process. The Pt/LSO/nitrided Si capacitors annealed at high temperature exhibit smaller CET and EOT, a less flatband voltage shift, a negligible hysteresis loop, a smaller equivalent dielectric charge density, and a much lower gate leakage current density as compared with that of the Pt/LSO/Si capacitors without Si surface nitridation.     

Effect of excess Y<Subscript>2</Subscript>O<Subscript>3</Subscript> addition on the physical properties of melt processed YBCO bulks

The YBCO superconductors with Y₂O₃ addition were prepared by a modified melt textured process and the effects of excess Y₂O₃ addition on the physical properties of melt textured YBCO have been investigated. It is found that the melt temperature of YBCO samples decreases drastically with the increasing Y₂O₃, and the maximum levitation forces are drastically different for samples with different Y₂O₃ addition. It is also found that the optimal Y₂O₃ addition to YBCO is about 10wt%. Considering the microstructure and the starting composition, the results are well discussed and interpreted.     

Deposition and characterization of binary Al2O3/SiO2 coating layers on the surfaces of rutile TiO2 and the pigmentary properties

Binary Al₂O₃/SiO₂-coated rutile TiO₂ composites were prepared by a liquid-phase deposition method starting from Na₂SiO₃·9H₂O and NaAlO₂. The chemical structure and morphology of binary Al₂O₃/SiO₂ coating layers were investigated by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, TG-DSC, Zeta potential, powder X-ray diffraction, and transmission electron microscopy techniques. Binary Al₂O₃/SiO₂ coating layers both in amorphous phase were formed at TiO₂ surfaces. The silica coating layers were anchored at TiO₂ surfaces via Si-O-Ti bonds and the alumina coating layers were probably anchored at the SiO₂-coated TiO₂ surfaces via Al-O-Si bonds. The formation of continuous and dense binary Al₂O₃/SiO₂ coating layers depended on the pH value of reaction solution and the alumina loading. The binary Al₂O₃/SiO₂-coated TiO₂ composites had a high dispersibility in water. The whiteness and brightness of the binary Al₂O₃/SiO₂-coated TiO₂ composites were higher than those of the naked rutile TiO₂ and the SiO₂-coated TiO₂ samples. The relative light scattering index was found to depend on the composition of coating layers.     

Effects of RE2O3 (RE = Tm, Sc, Yb) addition on the superconducting properties of ErBa2Cu3Oy

We investigated the effects of added Tm₂O₃, Sc₂O₃, and Yb₂O₃ on the superconducting properties of sintered Er123 samples. Tm₂O₃ addition caused the least T_c degradation, exhibiting a T_c above 90 K even for 17 vol% addition. Samples with added Sc₂O₃ maintained a T_c at above 90 K up to an addition of 7.2 vol%, while Yb₂O₃-containing samples showed a monotonic decrease in T_c with increased vol% of added Yb₂O₃. Tm₂O₃-containing samples exhibited a slight increase in J_c(0.1 T)/J_c(0) and had constant J_c values even for 17 vol% addition. XRD and SEM results indicate that the Tm₂O₃ is very stable in the superconducting matrix.     

Luminescent properties of Eu-activated Sr3B2SiO8: A red-emitting phosphor for white light-emitting diodes

Single-phased Sr₃B₂SiO₈:Eu³⁺ phosphor was prepared by a solid-state method at 1020 °C. The luminescence spectra showed that Sr₃B₂SiO₈:Eu³⁺ phosphor can be effectively excited by near ultraviolet light (393 nm) and blue light (464 nm). When excited at 393 or 464 nm Sr₃B₂SiO₈:Eu³⁺ exhibited the main emission peaks at 611 and 620 nm, which resulted from the supersensitive ⁵D₀→⁷F₂ transition of Eu³⁺. The luminescence intensity of Sr₃B₂SiO₈:Eu³⁺ at 611 and 620 nm reached the maximum when the doping content of Eu³⁺ was 4.5 mol%. Its chromaticity coordinates (0.646, 0.354) were very close to the NTSC standard values (0.67, 0.33). Thus, Sr₃B₂SiO₈:Eu³⁺ is considered to be an efficient red-emitting phosphor for long-UV InGaN-based light-emitting diodes.     

Vacuum-deposited wave-guiding layers on STW resonators based on LiTaO3 substrate as love wave sensors for chemical and biochemical sensing in liquids

A promising approach to apply the Love wave concept to commercially available low-loss surface acoustic wave (SAW) devices of the type Murata SAF 380 is presented. Thin wave-guiding layers of variable thickness are coated on the piezoelectric substrate of the devices. Two different layer materials were used: sputtered SiO₂ and a new polymer in this field, parylene C (poly-[2-chloro-p-xylylene]). Insertion loss, resonance frequency, frequency changes during protein precipitation and noise of the devices are discussed as a function of the thickness of the wave-guiding layer. It is demonstrated that the application of an optimized wave-guiding layer increases the sensitivity. When using SiO₂ as wave-guiding layer, an optimum layer thickness of 4 μm leads to a detection limit of 1.7 pg/mm². Therefore, the detection limit is improved by factor 7.7 as compared to uncoated SAW devices. Parylene-coated devices reach a detection limit of 2.9 pg/mm² at an optimum layer thickness of 0.5 μm. This corresponds to an improvement by factor 4.3. As the SAW devices used in this study are commercially available at low costs, applying appropriate wave-guiding layers permits an application as chemical or biochemical sensors with excellent sensitivities. Moreover, parylene-coated devices combine the sensitivity increase by excitation of Love waves with an excellent protective effect against corrosive attacks by the surrounding medium. Therefore, these sensors are most suitable for biosensing in conducting buffer solutions.     

First-principles study of the electronic and optical properties of the (Y, N)-codoped anatase TiO2 photocatalyst

First-principles plane-wave pseudopotential calculations are performed to study the geometrical structures, formation energies, and electronic and optical properties of Y-doped, N-doped, and (Y, N)-codoped TiO₂. The calculated results show that Y and N codoping leads to lattice distortion, easier separation of photogenerated electron-hole pairs and band gap narrowing. The optical absorption spectra indicate that an obvious red-shift occurs upon Y and N codoping, which enhances visible-light photocatalytic activity.     

H2 分子在Li3N(110)表面吸附的第一性原理研究

采用第一性原理方法研究了H₂分子在Li₃N(110)晶面的表面吸附. 通过研究H₂/Li₃N(110)体系的吸附位置、吸附能和电子结构发现: H₂分子吸附在N桥位要比吸附在其他位置稳定,此时在Li₃N(110)面形成两个-NH基,其吸附能为1.909 eV,属于强化学吸附;H₂与Li₃N(110)面的相互作用主要是H 1s轨道与N 关键词： 第一性原理 3N(110)')" href="#">Li₃N(110) 2')" href="#">H₂ 吸附和解离     

Effects of hydrogen flux on the properties of Al-doped ZnO films sputtered in Ar + H2 ambient at low temperature

Al-doped ZnO (AZO) transparent conductive thin films were grown by magnetron sputtering with AZO (98 wt.% ZnO, 2 wt.% Al₂O₃) ceramic target in Ar + H₂ ambient at a relatively low temperature of 100 °C. To investigate the dependence of crystalline and properties of as-grown AZO films on the H₂-flux, X-ray diffraction (XRD), X-ray photoemission spectrometer (XPS), Hall and transmittance spectra measurements were employed to analyze the AZO samples deposited with different H₂-flux. The results indicate that H₂-flux has a considerable influence on the transparent conductive properties of AZO films. The resistivity of 4.15 × 10⁻⁴ Ω cm and the average transmittance of more than 94% in the visible range were obtained with the optimal H₂-flux of 1.0 sccm. Such a low temperature growing method present here may be especially useful for some low-melting point photoelectric devices and substrates.     

L10 FePt thin films with [0 0 1] crystalline growth fabricated by SiO2 addition—rapid thermal annealing and dot patterning of the films

FePt films that have a high degree of order S in their L1₀ structure (S>0.90) and well-defined [0 0 1] crystalline growth perpendicular to the film plane were fabricated on thermally oxidized Si substrates by the addition of an oxide and successive rapid thermal annealing (RTA). The mechanism of L1₀ ordering and [0 0 1] crystalline growth perpendicular to the film plane arising through the oxide addition and RTA process is also discussed. The L1₀ ordering (S>0.90) and the [0 0 1] crystalline growth were achieved by (1) lowering the activation energy due to in-plane tensile stress and the initiation of L1₀ ordering at a low temperature, (2) [0 0 1] crystalline growth through in-plane tensile stress, and (3) enhancement of atomic diffusion via the addition of an oxide and the resultant lowering of the ordering temperature. Effect (1) was observed in the case of SiO₂ addition, effect (2) was generally observed in the case of oxide addition and the RTA process, and effect (3) was prominent in the case of ZnO addition. With the addition of ZnO, the L1₀ ordering started at below 400 °C and was completed at 500 °C. Finally, dot patterns were successfully fabricated down to a diameter of 15 nm using electron beam lithography, and the magnetic state of the dot pattern was observed by magnetic force microscopy.     

An investigation of paddle wheel Cu2(μ2-O2CCH3)4 for gas molecule adsorptions

Metal organic frameworks (MOFs) have been well-known and extensively researched due to the high storage /good selectivity for gas molecules. Herein, the structures and electron paramagnetic resonance (EPR) spectra for dicopper paddle wheel MOF compound (Cu₂(µ₂-O₂CCH₃)₄ with various gas molecule are theoretically investigated by density functional theory (DFT) calculations. The adsorption energies and isotherms (including pure gas molecules and the mixed ones) are calculated for the gas molecules interacting with the unsaturated Cu₂(µ₂-O₂CCH₃)₄. Both quantities exhibit the roughly consistent orders (e.g. H₂S?>?NH₃?>?CO₂?>?CO?>?H₂O?>?N₂?>?NO?>?H₂ for isotherms and H₂S?>?NH₃?>?N₂?>?CO₂?>?NO?>?H₂O?>?H₂?>?CO for adsorption energies), possibly suggesting that this material may act as a potential adsorbent of these gas molecules. The catalytic property of Cu₂(µ₂-O₂CCH₃)₄ for oxidation of CO and NO into non-toxic molecules and splitting of H₂O into H₂ and O₂ in the solvent condition are uniformly discussed. Simulation of Grand Canonical Monte Carlo (GCMC) in MS 8.0 and calculations in Langmuir model reveal that Cu₂(µ₂-O₂CCH₃)₄ has good selectivity for CH₄ in natural gas (CH₄/CO₂/N₂) and SO₂ in fog (SO₂/NO/NO₂/H₂O/O₂), which would exhibit potential environmentally friendly applications.     

The simulation study for the nanometer-scale selective growth of Si islands on Si(0 0 1) windows in ultrathin SiO2 films

The nanometer-scale selective growth of Si islands on Si(0 0 1) windows in ultrathin SiO₂ films are studied using the kinetic Monte Carlo simulation. The growth of Si islands is reproduced in simulation where we assume that the migration barrier energy for Si adatom on SiO₂ film is far lower than that on the Si surface at the window.