高双折射光子晶体光纤中均匀布拉格光栅的特性

研究了具有高双折射的光子晶体光纤(HB PCF)中均匀布拉格光栅(FBG)的光谱特性。利用紧凑的超格子模型,对光子晶体光纤的传输特性进行分析,研究正向传输和反向传输的模式之间的耦合规律,从而研究写入光子晶体光纤中的均匀布拉格光栅的特性。首先给出具有C6v对称性的零双折射光子晶体光纤中光纤布拉格光栅的布拉格波长λB随光纤结构参量的变化规律;然后分析一种高双折射光子晶体光纤中的光纤布拉格光栅的光谱特性,高双折射使两个不同偏振态的反射峰分开较大;最后分析了一种常用的双模双折射光子晶体光纤中光纤布拉格光栅的光谱特性,LP01模和LPe11模的两个偏振态对应的反射谱都由于高双折射而分开。     

Theoretical analysis and numerical simulation of development length of straight steel fiber in cementitious materials

In fiber-reinforced concrete, it is important to choose an appropriate length in each fiber to develop its full yield strength without a failure in the bond strength between the fiber and the concrete. This length is called the fiber development length, L_df. The bond capacity is evaluated between the fiber and the concrete using the pull-out tests. This test evaluates the bond capacity of various types of steel fiber surfaces relative to a specific embedded length. If the steel fiber is smooth and straight, the distribution of tensile stresses will be uniform around the fiber at a specific section and varies along the anchorage length of the fiber and at a radial distance from the surface of the fiber. Pull-out tests can be performed on an embedded straight steel fiber in concrete matrix, in this case, the tensile force, P, is increased gradually and the number of cracks and their spacings and widths is recorded. The bond stresses vary along the fiber length between the cracks. The strain in the steel fiber is maximum at the cracked section and decreases toward the middle section between cracks. If the embedded length of the straight steel fiber is greater than the development length, the steel fiber may yield, leaving some length of the fiber in the concrete. The linear elastic behavior of the fiber-matrix system is interrupted by interface debonding which occurs due to overall weak bonding between the concrete matrix and the surface of the steel fiber. This paper introduces new developed shear lag model and explains simplified method to find the development length of straight steel fiber in concrete matrix using finite element model and analysis of shear lag stresses, where the maximum tension force which is applied on the steel fiber is resisted by another internal force related with the ultimate average bond stress, steel fiber diameter and its yield strength.     

大功率激光单模光纤远距离传输的注入光纤光功率限值分析

对于大功率激光单模光纤远距离传输, 采用传统的受激拉曼散射(SRS)阈值作为注入光纤激光功率值取值过大。本文对单模光纤远距离传输过程中泵浦光和拉曼斯托克斯光(Stokes)光功率随注入光纤激光功率的变化进行仿真与理论分析。根据光纤中SRS产生的机理, 提出以拉曼Stokes光在单模光纤中传输的光功率变化曲线曲率极大值点对应的注入激光功率为限值, 对注入单模光纤光功率限值随着光纤长度变化进行仿真, 通过曲线拟合得出注入单模光纤激光功率限值公式, 并搭建实验系统进行验证。结果表明, 提出的注入单模光纤激光功率限值适用于大功率激光远距离单模光纤传输。     

色散补偿和色散位移光纤实现光脉冲压缩

根据超短光脉冲在光纤中传输的非线性薛定谔方程，模拟了不同色散参量情况下色散补偿和色散位移光纤对增益开关半导体激光器产生的光脉冲的压缩，给出了光脉冲在经过色散补偿光纤前后的啁啾曲线。结果表明，使用色散参量D分别为-150，-180和-20ps/(nm·km)的色散补偿光纤可以实现其他脉冲压缩方法的压缩效果，最大压缩因子达到6.09，但色散参量越大，所需光纤长度就越短。此外，脉冲经过色散补偿光纤后线性啁啾几乎为零。还利用色散位移光纤对脉冲进行孤子压缩，脉冲宽度由最初的45ps减小到1.23ps。指出采用这2种光纤相结合的方法可以对光脉冲实现高效压缩。     

高功率梯度掺杂增益光纤温度特性理论研究

在高功率光纤激光器中, 增益光纤的热效应是限制激光功率进一步提高的重要因素之一. 为了降低增益光纤的最高温度, 提出了一种通过改变增益光纤的掺杂浓度分布, 分散光纤激光的热效应, 从而提高激光输出功率的方法. 基于速率方程模型和热传导模型, 在光纤激光放大器输出功率大致相当的情况下, 对几种不同掺杂方式下增益光纤中的热分布和放大器的输出功率进行了数值模拟. 研究结果表明: 增益光纤的梯度掺杂可以优化光纤中的温度分布并提高光纤熔接点的稳定性; 同时兼具提高输出光束的光束质量、抑制光纤中非线性效应和模式不稳定的效果, 是提高光纤激光放大器输出功率切实可行的办法. 研究结果可以为高功率光纤激光器中增益光纤的设计提供一定的参考.     

光谱法研究MC尼龙6/芳纶复合材料的结构

将经甲苯二异氰酸酯(TDI)和己内酰胺改性的Kevlar纤维作为MC尼龙6的增强体,X射线光电子能谱观察到改性后纤维表面C,N和O元素的含量发生了改变,谱峰也相应发生变化。从红外光谱分析发现,Kevlar纤维和MC尼龙6相混所得谱图只是二者红外谱图的简单叠加,而改性Kevlar纤维可作为己内酰胺阴离子开环聚合的活性中心,且接枝链上的酰胺基可以与基体尼龙形成较强的氢键,有利于提高界面结合。XRD测试表明Kevlar纤维的引入并没有明显改变MC尼龙6的晶型,但其晶粒将具有更严格的三维周期性结构。在相同纤维用量时,改性Kevlar纤维增强的MC尼龙6的晶粒较未改性纤维的完善。当纤维含量小于2%时,纤维的加入有利于生成完善的α球晶,纤维含量大于2%时,α球晶结构含量随着纤维用量的增多反而下降。     

光子晶体光纤布拉格光栅传输谱特性的分析

研究光子晶体光纤中光纤光栅的传输谱特性对于研制基于光子晶体光纤的光纤光栅器件有着重要的意义。结合耦合模理论和光束传输相关函数方法,对一种典型光子晶体光纤中的布拉格光栅(FBG)传输谱进行了理论分析。比较了光子晶体光纤中布拉格光栅与常规布拉格光栅的传输谱。数值分析了光纤截面结构变化对于光栅传输谱的影响,并给出这种影响的定性解释。计算结果显示,与常规光纤光栅相比,包层模共振引起的损耗峰与正反向纤芯模耦合引起的损耗峰可以相比拟,而包层模共振的间隔也比常规光纤中光纤光栅的包层模共振间隔要大。同时给出了晶体光纤截面上空气孔的占空比,空气孔的排布层数对于传输谱影响的规律。     

Fiber bias in nanoindentation of polymer matrix composites

Nanoindentations were performed in the near fiber region of the matrix of a polymer matrix composite to attempt to determine the nanomechanical properties of the interphase. A possible fiber bias effect was observed and this effect was confirmed by performing nanoindentations in both the presence and in the absence of fiber. Changes in experimentation by using lower loads (40 μN and 80 μN) reduced the fiber bias effect. Cutting the samples at an angle to the fiber axis was performed to try to further reduce the fiber bias effect. The experimental variations considerably reduced the fiber bias effect. Specifically, the combination of angled cutting and use of reduced loads eliminated the fiber bias effect at distances greater than 150 nm from the fiber.     

分立式与分布式光纤传感关键技术研究进展

光纤传感技术已广泛应用于航空航天、石油化工、电子电力、土木工程、生物医药等领域,其技术形式主要体现为分立式和分布式.分立式光纤传感技术利用光纤敏感器件作为传感器来感知被测参量的变化,光纤作为光信号的传输通道连接光纤传感器及后端的解调装置;分布式光纤传感系统基于光纤瑞利散射、拉曼散射或布里渊散射等光学效应,利用光纤本身作为传感器,可对沿途的光信号进行大范围、长距离传感.本文介绍了分立式与分布式光纤传感中主要关键技术的研究进展,并对未来的研究和发展方向进行了探讨.     

基于温度激励的光纤陀螺光纤环瞬态特性检测

光纤陀螺基于萨尼亚克效应测量垂直于光纤环平面的敏感轴方向上的旋转分量。光纤环是光纤陀螺的核心部件,光纤环的缠绕质量直接影响着光纤陀螺的整体性能,对光纤环的缠绕质量全面检测十分必要。针对目前光纤环检测手段的局限性,提出了一种基于温度激励的光纤陀螺光纤环瞬态特性检测方法,全面表征了光纤环的缠绕质量。建立了光纤环柱面坐标三维计算模型,采用有限元方法定量分析光纤环不对称度和局部温度激励位置精度对光纤环瞬态响应的影响,同时开展了光纤环温度激励相应实验,实验结果与光纤环三维物理模型数值计算结果相一致,在理论和实验上验证了光纤环瞬态特性检测方法的可行性。     

Globally optimized fiber tracking and hierarchical clustering -- a unified framework

Structural connectivity between cortical regions of the human brain can be characterized noninvasively with diffusion tensor imaging (DTI)-based fiber tractography. In this paper, a novel fiber tractography technique, globally optimized fiber tracking and hierarchical fiber clustering, is presented. The proposed technique uses k-means clustering in conjunction with modified Hubert statistic to partition fiber pathways, which are evaluated with simultaneous consideration of consistency with underlying DTI data and smoothness of fiber courses in the sense of global optimality, into individual anatomically coherent fiber bundles. In each resulting bundle, fibers are sampled, perturbed and clustered iteratively to approach the optimal solution. The global optimality allows the proposed technique to resist local image artifacts and to possess inherent capabilities of handling complex fiber structures and tracking fibers between gray matter regions. The embedded hierarchical clustering allows multiple fiber bundles between a pair of seed regions to be naturally reconstructed and partitioned. The integration of globally optimized tracking and hierarchical clustering greatly benefits applications of DTI-based fiber tractography to clinical studies, particularly to studies of structure-function relations of the complex neural network of the human. Experiments with synthetic and in vivo human DTI data have demonstrated the effectiveness of the proposed technique in tracking complex fiber structures, thus proving its significant advantages over traditionally used streamline fiber tractography.     

宽带放大器用碲基掺铒光纤结构参量的设计考虑

利用光波导理论及均匀展宽四能级模型,研究了宽带放大器用阶跃型折射率分布碲基掺铒光纤的结构参量—纤芯半径和相对折射率差的设计考虑.理论研究表明,在单模传输条件下,为获取最大信号增益,宜选择相对折射率差大的碲基掺铒光纤来构建光纤放大器.相对折射率差一定的情况下,在高泵浦功率、小信号输入或光纤长度短于各信道最佳增益长度时,选择纤芯半径大的碲基掺铒光纤可以得到大的信号增益;反之,宜选择纤芯半径小的碲基掺铒光纤.     

小半径弯曲条件下传能光纤传输效率研究

利用光线理论分析弯曲光纤模型中的包层光线传输特性,结合半导体激光模块传能尾纤弯曲实验表明,由于光纤弯曲有效数值孔径减小而进入包层的光线并未完全被耗散,当光纤弯曲部分长度较短时,部分未耗散掉的包层光在进入直光纤部分后仍可重新回到纤芯中进而长距离传输作为有用光输出。该结论表明弯曲光纤的传输效率由弯曲半径和弯曲光纤长度共同决定,即在光纤弯曲半径远小于传统理论临界半径的情况下,合理控制传能光纤弯曲部分的长度,仍可获得较高的传输效率。     

基于少模光纤的SBS光谱阈值特性分析

受激布里渊散射会影响少模光纤传输系统中的信噪比、传输距离与传输容量,是影响传输系统入纤功率提高的重要因素。对阶跃型少模光纤的受激布里渊散射谱的阈值进行了研究,运用了布里渊散射谱、模式联运谱的数学模型对少模光纤散射特性进行了分析,探讨了少模光纤布里渊散射增益谱、阈值增益系数,以及光纤各参量对少模光纤阈值的影响。分析结果表明：SI-10阶跃型少模光纤中存在五种不同的传播模式,不同模式有各自的传输常数以及有效折射率,各模式相互作用导致模式展宽、增益降低,且布里渊散射谱峰值增益系数为3.9×10-11 m·W-1。阈值增益系数受到光纤传感距离的影响,在相对较短距离传输中阈值急速下降,且其趋势随长度增加渐趋平缓,当光纤长度达到22 km时阈值增益系数趋于常数18.1。少模光纤的阈值因光纤长度的递增而递减,且递减趋势渐缓趋于常数20.5 dBm;少模光纤不同模式受激布里渊散射的阈值也因光纤长度的递增而递减最终趋于常数,且不同模式的阈值因模式阶数的递增而递增;少模光纤的阈值随着光纤衰减系数和纤芯半径的递增而递增,且增加趋势缓慢增大。不同衰减系数的光纤其阈值在不同长度趋于常数,衰减系数越大受激布里渊散射阈值越大越容易趋于一常数。     

Bending insensitivity of fiber Bragg gratings in suspended-core optical fibers

This Letter presents simulation and experimental results that explore bending insensitivity of fiber Bragg gratings in suspended-core optical fibers. The implementation of thin silica bridge in the fibers enhances index contrast of the fiber core and reduces bending-induced strain transfer to the fiber core. This fiber design lead to a reduction of over 7 times in strain-induced fiber Bragg grating resonant peak shifts in the suspended-core fiber compared with that in standard telecommunication fiber, and an 0.14 dB bending loss at a bending radius of 6.35 mm.     

Role of weak interface to retain high strength of fiber in monofilamentary SiC fiber/titanium-aluminide composite

The tensile strength of monofilamentary weakly bonded SiC fiber/γ-TiAl intermetallic compound matrix composite, prepared by the sputtering method, was measured and analysed using a fracture mechanical technique. The main results are summarized as follows: (1) The fracture of TiAl occurred prior to that of fiber, resulting in formation of circumferential cracks on the fiber. Interfacial debonding occurred during tensile test, resulting in long pull-out of the fiber. (2) The strength of the fiber in the TiAl matrix was nearly the same as that of the bare fiber. (3) The fracture mechanical analysis showed that (i) the interfacial debonding grows unstably upon initiation and (ii) the stress distribution in the fiber in the cross-section, where the matrix is fractured, approaches to that of bare fiber with increasing debonded length. The reason why the fiber strength was maintained in spite of the formation of cracks on the fiber surface due to the premature fracture of the matrix was accounted for by the fully blunted crack-tip from the above calculation result.     

光纤端面的质量与光纤光学性能的关系

光纤的透过性能是光纤传输的重要特性之一。影响光纤透过性能的因素除了纤芯、包层玻璃的质量和几何缺陷以外,还与光纤端面的质量有关。在光纤的加工过程中,光纤端面的平整度、磨料的使用等都会影响端面的质量。讨论了影响光纤透过性能的因素;光纤端面的反射损失对透光性能的影响;增透膜对光纤端面反射的控制;加工后光纤端面的几何形状对透过性能的影响;加工后纤维端面折射率的变化情况;抛光液酸碱性的控制;抛光后光纤端面的处理。通过对光纤端面进行加工过程的控制和对光纤端面进行涂层的处理可改善光纤的透光性能。     

基于掺铒光子晶体光纤超荧光光源的实验研究

为了改进传统掺铒光纤超荧光光源的输出稳定性,提出基于掺铒光子晶体光纤的超荧光光源。构建了单程后向结构掺铒光子晶体光纤超荧光光源,研究了这种新型光源的输出特性。分析了掺铒光子晶平均波长体光纤长度和抽运功率对光源输出功率、光谱谱宽和平均波长的影响。结果表明,通过优化选取光纤长度28m和抽运功率220mW,获得了单程后向结构超荧光光源输出如下:输出功率45.74mW、光-光转换效率20.79%、谱宽31.5nm和平均波长1548.003nm。该实验结果为进一步研究掺铒光子晶体光纤超荧光光源在不同环境下的稳定性奠定了基础。     

酸溶法光纤传像束暗丝分析

阐述暗丝形成机理，指出光纤的各种缺陷破坏了光纤的正常传光条件，使传输损耗增大，透过率降低，形成暗丝。文中给出了表示暗丝变化规律的公式。     

光纤环形谐振腔的频率锁定及其特性

基于可调分束比的光纤分束器,制作了光纤环形谐振腔并通过调节分束比实现了对光纤环形谐振腔的欠耦合、临界耦合和过耦合的状态控制.实验测量了腔最小反射率与腔损耗之间的关系,获得光纤环形谐振腔的腔内衰减率为κ_0=2π×(1.60±0.03) MHz ,品质因子为Q=(1.10±0.02)×10.8.在此基础上,结合了压电陶瓷拉伸光纤以控制腔长和Pound-Drever-Hall锁频两大技术优势,克服了之前温度反馈控制等方法的反馈带宽窄、噪声大和稳定性差等问题,实现了对光纤环形谐振腔共振频率的快速、灵敏的控制和锁定.结果表明,锁频过程中相位调制功率与相位调制引起腔反射光的强度调制之间的关系为线性关系,进而通过降低相位调制信号的功率以减小相位调制对腔反射光强度调制的影响.当调制功率设定最低为–9 dBm时,光纤环形谐振腔仍能被稳定锁定.该光纤环形谐振腔为其与原子、金刚石色心等发光粒子相互作用的腔量子电动力学实验研究奠定了坚实的基础.