Synthesis and Characterization of Novel Poly(1‐Naphthylamine)‐Montmorillonite Nanocomposites Intercalated by Emulsion Polymerization

Nanocomposites of montmorillonite (MMT) with poly(1‐naphthylamine) (PNA) is investigated for the first time by emulsion polymerization using three different oxidants. Polymerization of PNA was confirmed by Fourier transformation infrared (FT‐IR) as well as UV‐visible spectra. The in situ intercalative polymerization of PNA within MMT layers was confirmed by FT‐IR, X‐ray diffraction, conductivity; scanning electron microscopy (SEM) as well as transmission electron microscopy studies. X‐ray diffraction revealed intercalated as well as exfoliated structures of PNA/MMT nanocomposites, which were compared with the reported polyaniline‐MMT nanocomposites. It was found that the increase in the concentration of PNA in the interlayer galleries of MMT led to destruction of the layered clay structure resulting in exfoliation of the nanocomposite. Conductivity of the nanocomposites was found to be in the range of 10^?3 to 10^?2 S cm^?1 which was found to be higher than the ones reported for polyaniline‐clay nanocomposites as well as PEOA‐OMMT nanocomposites at similar concentrations of intercalated species. The morphology of PNA/MMT nanocomposites was found to be governed by the nature of the oxidant used.     

铽配合物——蒙脱土新型复合发光材料的插层组装、表征和发光性能

合成了铽的配合物[TbL] (ClO₄)₃(L: 2, 2, 2', 2'-四[N-苯基-N-苄基(乙酰胺)-2-氧甲基]丁醚), 通过离子交换反应将配离子[TbL]³⁺插层组装到蒙脱土(MMT)层板间, 制备出了新型复合发光材料 [TbL]³⁺-MMT．用元素分析、X射线衍射、傅氏变换红外光谱和紫外-可见光谱对材料进行了表征, 对其荧光性质进行了研究．结果表明, 复合发光材料保持了蒙脱土良好的层柱结构特征和[TbL]³⁺离子的笼状结构特征, [TbL]³⁺离子以单层形式分布于蒙脱土层板间．在紫外光激发下, 复合发光材料发出较强的绿色荧光, 其发射光谱与相应配合物的发射光谱相似．与相应纯配合物比较, 复合发光材料单位质量Tb³⁺的相对荧光强度、荧光单色性和光稳定性有显著改善, 其激发波长向可见光区发生明显位移, 说明插层组装对相应配合物的激发波长有一定的调制作用.     

Preparation and Properties of Novel Modified Humidity Control Composite Materials

Montmorillonite /polyacrylamide (MMT/PAM) humidity control materials, with the MMT modified separatly by argent-ammonium complex ions ([Ag(NH₃)₂]⁺) and copper ions (Cu²⁺) (Ag-MMT/PAM, Cu-MMT/PAM) were prepared. The structures of the Ag-MMT/PAM and Cu-MMT/PAM were characterized with X-ray diffraction (XRD), Fourier transform infrared spectra (FTIR) and scanning electron microscopy (SEM). The humidity control property was examined by a desiccator method. Antibacterial properties were tested with an inhibition zone method. The results showed that the structures of Ag-MMT/PAM and Cu-MMT/PAM were loose and porous. Polyacrylamide was intercalated into the layers of the MMT. The increasing interlayer spacings of Ag-MMT/PAM and Cu-MMT/PAM were from 1.51 nm for the original MMT to 2.04 nm and 2.11 nm, respectively. Both Ag-MMT/PAM and Cu-MMT/PAM presented good humidity control and antibacterial properties.     

Structural,optical and electrical properties of 60 MeV C5+ ion-irradiated poly(3-methylthiophene) films

The structural, optical and electrical properties of 60 MeV C⁵⁺ ion-irradiated poly(3-methylthiophene) (P3MT) synthesized by the chemical oxidation polymerization method have been studied. The P3MT powder was dissolved in chloroform (CHCl₃), and thin films of thickness 2 μm were prepared on glass and Si substrates. The polymerization was confirmed by the FTIR spectrum. Then films were irradiated by 60 MeV C⁵⁺ ions at different fluences. FTIR spectra show methyl group evolution after irradiation. The optical band gap decreases slightly after irradiation and the DC conductivity increases by about one order of magnitude after irradiation at the highest fluence. The role of S _e has also been discussed when compared with 60 MeV Si⁵⁺ ion irradiation of P3MT. The morphological changes are observed using SEM.     

Monitoring the gelation of polyacrylamide–sodium alginate composite by fluorescence technique

Polyacrylamide (PAAm)–sodium alginate (SA) composite was prepared with different amounts of SA varying in the range between 0.06% and 2% (w/v). The PAAm–SA composite was characterized by the steady-state fluorescence technique. Pyranine was added as a fluoroprobe for monitoring the polymerization. It was observed that pyranine molecules bind to AAm and SA chains upon the initiation of the polymerization. Thus, the fluorescence spectra of the bonded pyranines shift to the shorter wavelengths. Fluorescence spectra from the bonded pyranines allowed us to monitor the sol–gel phase transition, and to test the universality of the sol–gel transition as a function of SA contents. Observations around the critical point show that the gel fraction exponent, β, and the weight average degree of polymerization exponent, γ, agreed with the percolation result for (<0.25% (w/v)) SA contents. However, classical results were produced at (<2% (w/v)) SA contents.     

Emulsion Polymerized Polystyrene/Montmorillonite Nanocomposite and its Viscoelastic Characteristics

A novel polystyrene (PS)/clay nanocomposite was synthesized using a simple emulsion polymerization method in the presence of sodium ion exchanged montmorillonite (Na‐MMT). Prior to the radical polymerization procedure with potassium persulfate (KPS) as an initiator, the hydrophobic styrene monomer was intercalated into hydrophilic clay layers using sodium dodecyl sulfate (SDS) as a surfactant. The FTIR spectra of the products showed the characteristic absorbance peaks of both the synthesized PS and Na‐MMT. The x‐ray diffraction patterns of the products exhibited an increase in the d ₀₀₁‐spacing, pointing to the intercalation of the PS chains into the intergalleries of the Na‐MMT. The enhancement of the thermal properties of the nanocomposite materials, such as the increase in the glass transition temperature of the PS, was investigated by differential scanning calorimetry (DSC). Furthermore, based on the viscoelastic properties of the products examined using a rotational rheometer with a parallel plate geometry, the nanocomposites were found to exhibit more rapid shear thinning and increased storage (G′) and loss (G″) moduli with increasing clay content.     

Polycyanurate–Organically Modified Montmorillonite Nanocomposites: Structure–Dynamics–Properties Relationships

Polycyanurate‐modified montmorrilonite (PCN‐MMT) nanocomposites were synthesized by polymerization of dicyanate ester of bisphenol A in the presence of MMT dispersed by ultrasound. Techniques of IR spectroscopy, WAXD, and TEM were applied to study polymerization kinetics and structure of the nanocomposites prepared, whereas their dynamics and thermal/mechanical properties over the ?30 to 420°C range were studied by using DSC, laser‐interferometric creep rate spectroscopy (CRS), and dielectric relaxation spectroscopy (DRS) techniques. It was shown that a small amount of MMT additive acts as a catalyst of polymerization and results in the formation of complicated intercalated/exfoliated structures, as well as strongly modifies the dynamics in the PCN network. Pronounced dynamic heterogeneity was observed for PCN/MMT nanocomposites. Along with the main PCN glass transition, two new glass transitions, at much higher and much lower temperatures, were revealed as a consequence of constrained dynamics in matrix interfacial nanolayers and due to incomplete local cross‐linking in the PCN matrix, respectively. In addition, increased sub‐T _g mobility was observed in these nanocomposites. A two‐fold rise of modulus of elasticity as well as increasing thermal stability and arising microplasticity at low temperatures, promoting, obviously, improved crack resistance in a brittle PCN network, were found for the PCN‐MMT nanocomposites.     

Modelling of multifrequency ESR spectra of Fe3+ ions in crystalline and amorphous materials: A Simplified approach to determine statistical distributions of spin-spin coupling parameters

Focussed on the understanding of the complex Fe³⁺ electron spin resonance (ESR) spectra in crystalline and amorphous systems, the simulation program ESR-MAKRO-1 was developed, which allows the calculation of powder spectra of paramagnetic centers with 1/2 ≤S ≤7/2. For the reproduction of the ESR spectra of amorphous systems Gaussian distributions of the zero-field-splitting parameters of second and fourth order (D, E, a, F) were implemented into the program. Applications of ESR-MAKRO-l are given both for crystalline powders and for glassy systems. A stepwise analysis of the ESR spectra, allowing an approach to Fe³⁺ ESR spectra of amorphous matrices and showing the influence ofD, E, a, andF as well as their distributions, is given.     

Fabrication of surface‐enhanced Raman scattering‐active ZnO/Ag composite microspheres

We show in this paper how zinc oxide (ZnO)/silver (Ag) composite microspheres can be prepared by the reduction of Ag(NH₃)₂⁺ with the reducing agent formaldehyde in aqueous solution on the surface of ZnO microspheres. During the preparation, Sn²⁺ was absorbed on the surface of ZnO microspheres for sensitization and activation, and then Ag(NH₃)₂⁺ was reduced to Ag nanoparticles by the reducing agent to obtain ZnO/Ag composite microspheres. SEM and TEM images revealed silver nanoparticles with a diameter ranging from tens to 100 nm. X‐Ray photoelectron spectra (XPS), X‐ray diffraction (XRD) patterns and UV‐vis spectra were used to characterize the structure of the ZnO/Ag composite microspheres. The origin of the surface‐enhanced Raman scattering properties was traced to the surface of the ZnO/Ag composite microspheres. The enhancement factor was estimated in detail, and the enhancement mechanism for the SERS effect was also investigated. Copyright © 2007 John Wiley & Sons, Ltd.     

Er3+/Yb3+共掺碲硼硅酸盐玻璃的光谱性质和热稳定性研究

制备了系列Er³⁺/Yb³⁺共掺碲硼硅酸盐玻璃样品(85-x)TeO₂-15B₂O₃-xSiO₂ (TBS x=0,5,10,15,20 mol%).测试和分析了样品的吸收光谱、荧光光谱、能级寿命、红外透射光谱及差热特性.并通过对Er³⁺离子⁴I_13/2→⁴I_15/2跃迁发射谱线的高斯拟合，设计了一个简单的四能级结构估算了Er³⁺离子⁴I_13/2和⁴I_15/2能级在碲硼硅酸盐中的Stark分裂情况.研究表明SiO₂的引入能有效地改善玻璃的热稳定性和光谱性能，玻璃析晶温度T_x与玻璃转变温度T_g之差(ΔT=T_x-T_g)可达178℃，说明碲硼硅酸盐是一种适合于光纤拉制的玻璃基质材料.比较了不同基质玻璃中Er³⁺离子的荧光半高宽和受激发射截面，结果表明TBS玻璃系统具有较好的带宽性能，是一种优良的宽带光纤放大器候选基质材料. 关键词： 碲硼硅酸盐 热稳定性 高斯拟合 -基')" href="#">OH^-基     

57Fe Mössbauer and infrared studies of the system Co1−x Cd x Fe2O4

Mössbauer and infrared studies were made on samples of the ferrite system Co_1–xCd_xFe₂O₄ x=0.0, 0.1, 0.3, 0.5, 0.7, 0.9 and 1. Mössbauer spectra were taken at room temperature. The spectra of the samples withx0.7 showed well defined Zeeman patterns and they have been analyzed with two components, one due to A-site Fe³⁺ ions, and the other due to B-site Fe³⁺ and Fe²⁺ ions. The pattern due to B-site appeared to be composite and an explanation is given. The spectra withx=0.9 and 1 showed only a quadrupole splitting. The effect of cadmium substitution on the various hyperfine interactions has been discussed and the cationic distribution has been deduced for all values ofx. Far infrared spectra of the ferrite samples in the range 200–700 cm^–1 were reported. Four bands were observed: the high frequency bandv ₁ is assigned to tetrahedral complexes, and the low frequency bandv ₂ to octahedral complexes, a small bandv ₃ is due to Co²⁺-O^2– complexes andv ₄ is assigned to the lattice vibration of the system. The splitting occurred in thev ₁ andv ₂ bands atx=0.9 and inv ₂ atx=1, indicating the presence of Fe²⁺ ions in octahedral sites.     

Structures and luminescence properties of Yb3＋ in the double perovskites Ba2YB＇O6 （B＇=Ta5＋, Nb5＋） phosphors

The Yb³⁺ doped Ba₂YB'O₆ (B'=Ta⁵⁺, Nb⁵⁺) were prepared by high temperature solid-state reaction method, their structures were determined by x-ray diffraction and refined by Rietveld method. The diffuse reflection absorption, excitation and emission spectra of Yb³⁺:Ba₂YB'O₆ (B'=,Ta⁵⁺, Nb⁵⁺) were measured at room temperature. Under the excitation of ultraviolet light, these phosphors exhibit broad charge transfer band emissions of TaO₆ or NbO₆ centre with large Stokes shift. The Yb³⁺ doped into these hosts are situated at Y³⁺ sites of cubic symmetry (O_h). The experimental energy levels of Yb³⁺ in Ba₂YTaO₆ and Ba₂YNbO₆ were determined by photoluminescence and diffuse reflection absorption spectra. Their wavefunctions and theoretical energy levels were obtained by diagonalising the Hamiltonian matrix. The experimental energy levels were fitted by Levenberg--Marquardt iteration algorithm to determine crystal field parameters. Then, the magnetic-pole transition line strengths of Yb³⁺:Ba₂YB'O₆(B'=Ta⁵⁺, Nb⁵⁺) from (²F_5/2)Γ₈^- to the low-energy states were calculated.     

Characterization of Ir(ppy)3 and [Ir(ppy)2 bpy]+ by infrared,Raman spectra and surface‐enhanced Raman scattering

The Raman and infrared spectra of fac ‐tris(2‐phenylpyridinato‐N,C2′)iridium(III), Ir(ppy)₃ and surface‐enhanced resonance Raman spectra of bis(2‐phenyl pyridinato‐) (2,2′bipyridine) iridium (III), [Ir(ppy)₂ (bpy)]⁺ cation were recorded in the wavenumber range 150–1700 cm⁻¹, and complete vibrational analyses of Ir(ppy)₃ and [Ir(ppy)₂ (bpy)]⁺ were performed. Most of the vibrational wavenumbers were calculated with density‐functional theory agree with experimental data. On the basis of the results of calculation and comparison of the spectra of both complexes and their analogue [Ru(bpy)₃]²⁺, we assign the vibrational wavenumbers for metal–ligand modes; metal–ligand stretching wavenumbers are 277/307 and 261/236 cm⁻¹ for Ir(ppy)₃, and 311/324, 257/270, 199/245 cm⁻¹ for [Ir(ppy)₂ bpy]⁺. Surface‐enhanced Raman scattering spectra of [Ir(ppy)₂ bpy]²⁺ were measured at two wavelengths on the red and blue edges of the low‐energy metal‐to‐ligand charge‐transfer band. According to the enhanced Raman intensities for the vibrational modes of both ligands ppy and bpy, the unresolved charge‐transfer band is deduced to consist of charge‐transfer transitions from the triplet metal to both ligands ppy and bpy. Copyright © 2010 John Wiley & Sons, Ltd.     

共沉淀法制备Y2SiO5∶Er3+ ,Yb3+ ,Tm3+及其上转换发光性能研究

采用化学共沉淀法制备了系列Y_1.98-2xYb_2x Er_0.02SiO₅(0.00≤x≤0.15)以及Y_1.736Yb_0.24Er_0.02Tm_0.004SiO₅上转换发光材料,比较了室温下Y_1.98-2xYb_2x Er_0.02 SiO₅ (x=0.00,0.08)样品在400—1600 nm范围内的吸收光谱,测量了所有样品在976 nm OPO激光器激发下的上转换发射光谱,以及Er³⁺离子⁴S_3/2(⁴F_9/2)→⁴I_15/2,Tm³⁺离子¹G₄→³H₆荧光衰减曲线和不同激发功率下的上转换蓝光发射强度,从而分析讨论了Er³⁺,Tm³⁺在Y₂SiO₅中的上转换发光机理.研究结果表明:在1250 ℃相对较低的温度下合成了X2型单斜晶系Y₂SiO₅ ∶Ln³⁺(Ln³⁺=Er³⁺,Yb³⁺,Tm³⁺),Yb³⁺的敏化显著增强了样品在976 nm附近的吸收能力,并大幅度加宽了该处的吸收带.分析上转换发射光谱发现:上转换绿光和红光强度都随着Yb³⁺浓度的增加先增强后减弱,但红光的猝灭浓度较高,归因于Er³⁺→Yb³⁺反向能量传递ETU4和Yb³⁺→Er³⁺正向能量传递ETU3过程的发生;上转换蓝光发射是三光子吸收过程,是通过Yb³⁺,Tm³⁺之间三次声子辅助的能量转移方式实现的. 关键词： 上转换 共沉淀 2SiO₅∶Er³⁺')" href="#">Y₂SiO₅∶Er³⁺ 3+')" href="#">Yb³⁺ 3+')" href="#">Tm³⁺     

Peculiarities in fragment mass distribution in the 238U + 40Ar (243 MeV) reaction

A pronounced fine structure (FS) in the form of distinct peaks was observed in neutron gated mass spectra from the decay of the ²⁷⁸110 composite system produced in the reaction ²³⁸U + ⁴⁰Ar (243 MeV) at an initial excitation energy E ^* > 70 MeV. The FS peaks are located in the vicinity of mass numbers 70-80, 100, and 130, which correspond to those of magic nuclei (clusters). In the data there is also evidence for a new type of decay -- collinear cluster tripartition of an excited nucleus. Received: 8 August 2000 / Accepted: 2 February 2001     

Food additives characterization by infrared,Raman, and surface‐enhanced Raman spectroscopies

Fourier‐transform infrared (FT‐IR), Raman (RS), and surface‐enhanced Raman scattering (SERS) spectra of β‐hydroxy‐β‐methylobutanoic acid (HMB), L ‐carnitine, and N‐methylglycocyamine (creatine) have been measured. The SERS spectra have been taken from species adsorbed on a colloidal silver surface. The respective FT‐IR and RS band assignments (solid‐state samples) based on the literature data have been proposed. The strongest absorptions in the FT‐IR spectrum of creatine are observed at 1398, 1615, and 1699 cm⁻¹, which are due to ν_s(COOH) + ν(CN) + δ(CN), ρ_s(NH₂), and ν(C O) modes, respectively, whereas those of L ‐carnitine (at 1396/1586 cm⁻¹ and 1480 cm⁻¹) and HMB (at 1405/1555/1585 cm⁻¹ and 1437–1473 cm⁻¹) are associated with carboxyl and methyl/methylene group vibrations, respectively. On the other hand, the strongest bands in the RS spectrum of HMB observed at 748/1442/1462 cm⁻¹ and 1408 cm⁻¹ are due to methyl/methylene deformations and carboxyl group vibrations, respectively. The strongest Raman band of creatine at 831 cm⁻¹ (ρ_w(R NH₂)) is accompanied by two weaker bands at 1054 and 1397 cm⁻¹ due to ν(CN) + ν(R NH₂) and ν_s(COOH) + ν(CN) + δ(CN) modes, respectively. In the case of L ‐carnitine, its RS spectrum is dominated by bands at 772 and 1461 cm⁻¹ assigned to ρ_r(CH₂) and δ(CH₃), respectively. The analysis of the SERS spectra shows that HMB interacts with the silver surface mainly through the  COO⁻, hydroxyl, and  CH₂ groups, whereas L ‐carnitine binds to the surface via  COO⁻ and  N⁺(CH₃)₃ which is rarely enhanced at pH = 8.3. On the other hand, it seems that creatine binds weakly to the silver surface mainly by  NH₂, and C O from the  COO⁻ group. Copyright © 2006 John Wiley & Sons, Ltd.     

Dy3+掺杂Ge-Ga-S-CsI玻璃中红外发光特性研究

用熔融淬冷法制备了系列掺杂浓度的Dy³⁺:Ge-Ga-S-CsI硫卤玻璃样品,测试了样品拉曼光谱、折射率、吸收光谱、近红外及中红外荧光谱.应用Judd-Ofelt理论计算了Dy³⁺离子的强度参数 (Ω_i, i=2,4,6)、自发辐射跃迁概率(A)、荧光分支比(β)、以及辐射寿命(τ_rad)等光谱参数.研究了810 nm激光抽运下样品中红 关键词： 硫系玻璃 中红外发光 3+掺杂')" href="#">Dy³⁺掺杂 多声子弛豫     

Morphology and Properties of Poly(vinyl alcohol)/MMT Nanocomposite Prepared by Solid-state Shear Milling (S3M)

Poly(vinyl alcohol) (PVA)/montmorillonite (MMT) nanocomposites were prepared by combining solid-state shear milling (S³M) technology with melt intercalation. Compared with the composite obtained by simple melt intercalation, more MMT layers were exfoliated and apparently oriented along the injection molding direction in the nanocomposite prepared by combining S³M technology and melt intercalation, which greatly increased the orientation degree of MMT, resulting in the greater interactions between PVA and MMT layers. Simultaneously, this also promoted the orientation of PVA molecules and produced effective nucleation of the crystallization of PVA. Consequently, the thermal stability and mechanical properties of PVA were obviously improved. For instance, when the MMT content was 3 wt%, the tensile strength and modulus of the nanocomposite with MMT prepared by S³M were 98.9 MPa and 3.1 GPa, respectively, increasing by 52% and 63.2% compared with PVA.     

Effect of ion beam irradiation on palladium (II) acetyl acetonate dispersed in polymer matrix

Composites, containing different concentrations of palladium (II) acetylacetonate in polymethyl methacrylate (PMMA) matrix were prepared by vigorous mixing. PMMA was prepared by solution polymerization technique. The composites were irradiated with a 120 MeV Ni¹⁰⁺ beam at two different fluences of 1×10¹¹ and 5×10¹² ions/cm² to study ion-induced effects on their dielectric, structural properties and surface morphology. AC electrical properties of these samples were studied in the frequency range 100 Hz to 10 MHz. The dielectric permittivity/loss shows frequency dependent behavior and it obeys the universal law of dielectric (i.e. ?α f ^n?1) for pristine and irradiated samples at high frequency. The crystalline size and crystallinity of the composites were studied by X-ray diffraction analysis. Decrease in peak intensity after irradiation signifies the amorphization which is also responsible for decrease in T _g as obtained by means of differential scanning calorimetry measurement. Fourier transform infrared spectra also support this result. Surface roughness increases upon irradiation as observed from scanning electron microscopy.     

Magnetic defect structure of iron-rich Fe x O

Mössbauer spectra were recorded at 80 and 4.2 K for Fe _x O (x> 0.95) samples that had been synthesized at 1000 C and pressures up to 10 GPa. The spectra, which consist predominantly of six broadened lines, were fit to three magnetic components: bulk Fe²⁺, defect cluster Fe²⁺ and defect cluster Fe³⁺. Mean hyperfine parameter values for bulk Fe²⁺ were calculated using second-order perturbation theory, and correlations between fluctuations were determined from the mean-square linewidths. Implications for the magnetic defect structure of Fe _x O are discussed.