Study on the Nonisothermal Melt Crystallization Kinetics of DBS/PBT Blends

The modified Avrami, Mo, and Kissinger models were applied to investigate the nonisothermal melt crystallization process of dibenzylidene sorbitol (DBS)/poly(butylene terephthalate) (PBT) blends by differential scanning colorimetry (DSC) measurements. The modified Avrami model can describe the nonisothermal melt crystallization processes of DBS/PBT blends fairly well. The cooling rates and the blend composition affect the crystallization of the blends according to Mo crystallization kinetics parameters. The Mo model shows that F(T) increases with increasing crystallinity, indicating that the needed cooling rate when it reached a certain crystallinity increased in unit time, the crystallization rate of DBS/PBT blends is faster than the crystallization rate of pure PBT, and the crystallization rate of the DBS/PBT blends with 0.5% DBS is fastest. The Kissinger model showed that the crystallization activation energy of DBS/PBT blends is lower than the activation energy of pure PBT; the crystallization activation energy of the DBS/PBT blends with 0.5% DBS is the lowest.     

Nonisothermal Crystallization Kinetics and Microhardness of PP/CNT Composites

The nonisothermal crystallization kinetics and microhardness of nanocomposites consisting of a polypropylene matrix (PP) and carbon nanotube filler (CNT) have been investigated. Three types of PP matrixes have been used: two of them are nonfunctionalized PP that differ slightly in their melt flow index, whereas the third is grafted with maleic anhydride (MA). Ozawa formalism has been used to study the nonisothermal crystallization kinetics. The results show that the CNT filler has a nucleation role in the nonisothermal crystallization of PP. For all nanocomposites, the nonisothermal crystallization rate increases up to 4% CNT and then decreases slightly or remains almost constant at the higher filler content. This fact has been interpreted in terms of an aggregation of the particles at high filler concentration, which leads to a decrease of the nucleation ability of the filler because the number of heterogeneous nuclei decreases. The crystallization mechanism of the PP matrixes almost does not change in the presence of the CNT filler. The microhardness of the two nonfunctionalized PP increases when the filler content increases and then remains constant above a certain filler content. The experimental microhardness values of the composites based on the functionalized PP are lower than those of the corresponding calculated additive values. The decrease of the creep constant with the filler addition is not significant, as should be expected when inorganic filler is added to a polymer matrix. This is due to the very fine dispersion of the fillers into the polymer matrix at the nanoscale level.     

Nonisothermal Crystallization Behavior of Polypropylene-C60 Nanocomposites

The nonisothermal crystallization behavior of polypropylene (PP) and PP-fullerene (C₆₀) nanocomposites was studied by differential scanning calorimetry (DSC). The kinetic models based on the Jeziorny, Ozawa, and Mo methods were used to analyze the nonisothermal crystallization process. The onset crystallization temperature (T_c), half-time for the crystallization (t_1/2), kinetic parameter (F(T)) by the Mo method and activation energy (ΔE) estimated by the Kissinger method showed that C₆₀ accelerates the crystallization of PP, implying a nucleating role of C₆₀. Furthermore, due to the reduced viscosity of PP by adding 5% C₆₀, the parameters of crystallization kinetics for the PP-5%C₆₀ nanocomposites changed remarkably relative to that of neat PP and when lower contents of C₆₀ were added to PP.     

Nonisothermal Crystallization Kinetics of Nylon 66/Montmorillonite Nanocomposites

Polyamide 66(PA66)/montmorillonite nanocomposites were prepared via direct melt compounding. The nonisothermal crystallization of PA66 and PA66/MMT nanocomposites were investigated by differential scanning calorimetry. The results show that MMT platelets play a competing role in the crystallization process of nylon 66. On the one hand, they can act as a nucleator for the PA66 matrix, accelerating the crystallization rate; on the other hand, they retard the crystal/spherulite growth, especially for nanocomposites with higher MMT content. The analysis results using Jeziorny and Mo equations verify the dual actions of the nucleation and the obstruction of crystallization of MMT in the PA66 matrix. Kissinger's method was used to obtain the activation energy of the crystallization process; the results confirm that the incorporation of MMT causes the above actions.     

Crystalline Morphology and Nonisothermal Crystallization Behaviors of iPP/PcBR Blends

Isotactic polypropylene/poly(cis‐butadiene) rubber (iPP/PcBR) blends were prepared by melt mixing. The influence of PcBR content on crystalline morphology and nonisothermal crystallization behaviors of iPP was investigated by polarized optical microscopy (POM), small angle light scattering (SALS), and differential scanning calorimetry (DSC). The POM showed that an increase of PcBR ranging from 10 vol% to 40 vol% led to less perfection of spherulites, vaguer boundaries between spherulites, and smaller spherulite size, which was quantitatively validated by SALS. The presence of PcBR also remarkably affected the nonisothermal crystallization behaviors of iPP. An addition of PcBR caused higher crystallization peak temperature and a faster crystallization rate, meaning a heterogeneous nucleation effect of PcBR upon crystallization of iPP. For the same sample, the crystallization peak temperature moved to lower temperature and the crystallization rate increased as the cooling rate increased. The Ozawa and combined Avrami and Ozawa equations were used to describe the nonisothermal crystallization process of iPP and blends. The combined Avrami and Ozawa equation was more appropriate for the crystallization of the blends. Crystallization activation energy of iPP and blends was calculated by the Kissinger equation; the result showed that crystallization activation energy decreased as the content of PcBR increased from 30 vol% to 40 vol%.     

Effect of Organoclay Platelets on Crystallization of PTT/EPDM-g-MA Blends: Nonisothermal Melt Crystallization Kinetics

PTT/EPDM-g-MA (80/20 w/w) nanocomposites were prepared by melt mixing of poly(trimethylene terephthalate) (PTT), ethylene-propylene-diene copolymer grafted with maleic anhydride (EPDM-g-MA), and organoclay. The blend nanocomposites show typical sea-island morphologies. The nonisothermal crystallization kinetics of pure PTT and 80/20 (w/w) PTT/EPDM-g-MA blends with various amounts of the clay were extensively studied by differential scanning calorimetry (DSC). The Avrami, Ozawa, and Mo methods were used to describe the nonisothermal crystallization process of pure PTT and 80/20 (w/w) PTT/EPDM-g-MA blends with various amounts of the clay. Avrami analysis results show that the crystallization rates of 80/20 (w/w) PTT/EPDM-g-MA blends with the clay were faster than those of pure PTT or PTT/EPDM-g-MA blends without clay, which indicates that the clay particles promote crystallization effectively, in agreement with the Mo analysis results. Ozawa analysis can describe the nonisothermal crystallization of pure PTT very well but was rather inapplicable to the 80/20 (w/w) PTT/EPDM-g-MA blends with various amounts of the clay.     

Study on the Nonisothermal Crystallization Kinetics of Poly(Vinylidene Fluoride)/Tributyl Citrate Blends Via Thermally Induced Phase Separation

The nonisothermal crystallization kinetics of poly (vinylidene fluoride) (PVDF) in PVDF/tributyl citrate (TBC) blends having undergone thermally induced phase separation were investigated through differential scanning calorimetry measurements. Ozawa theory, Mo's method and Kissinger model were used to analyze the kinetics of the nonisothermal crystallization process. The Ozawa theory failed to describe the crystallization behavior of PVDF in the PVDF/TBC blends, whereas the Mo model was able to describe the nonisothermal crystallization process fairly well. The crystallization activation energy was determined by the Kissinger method, and was in the range of 90–165 kJ/mol.     

Nonisothermal Crystallization of Recycled Poly(Ethylene Terephthalate)/Poly(Ethylene Octene) Blends

Recycled poly(ethylene terephthalate) (r-PET) was blended with poly(ethylene octene) (POE) and glycidyl methacrylate grafted poly(ethylene octene) (mPOE). The nonisothermal crystallization behavior of r-PET, r-PET/POE, and r-PET/mPOE blends was investigated using differential scanning calorimetry (DSC). The crystallization peak temperatures (T _p ) of the r-PET/POE and r-PET/mPOE blends were higher than that of r-PET at various cooling rates. Furthermore, the half-time for crystallization (t _1/2 ) decreased in the r-PET/POE and r-PET/mPOE blends, implying the nucleating role of POE and mPOE. The mPOE had lower nucleation activity than POE because the in situ formed copolymer PET-g-POE in the PET/mPOE blend restricted the movement of PET chains. Non-isothermal crystallization kinetics analysis was carried out based on the modified Avrami equation, the Ozawa equation, and the Mo method. It was found that the Mo method provided a better fit for the experimental data for all samples. The effective energy barriers for nonisothermal crystallization of r-PET and its blends were determined by the Kissinger method.     

Confined Crystallization in Polymer Blends: DSC Studies of the Behavior and Kinetics of Isothermal Crystallization of Polypropylene in Poly(cis-butadiene) Rubber Blends

Thermal properties of polypropylene with poly(cis-butadiene) rubber (iPP/PcBR) blends have been measured by differential scanning calorimetry (DSC), and the melting point T_m, crystallization temperature T_c, enthalpy Δ H (melting enthalpies and crystalline enthalpies), and equilibrium melting point T⁰ _m have been measured and calculated. The variation of T_m, T_c, Δ H and T⁰ _m with composition in the blends was discussed, showing that an interaction between phases is present in iPP/PcBR blends. The degree of supercooling characterizing the interaction between two phases in the blends and the crystallizability of the blends which bears a relationship to the composition of the blends was discussed. The kinetics of isothermal crystallization of the crystalline phase in iPP/PcBR blends was studied in terms of the Avrami equation, and the Avrami exponent n and velocity constant K were obtained. The Avrami exponent n is between 3 and 2, meaning that iPP has a thermal nucleation with two dimensional growths. The variation of the Avrami exponent n, velocity constant K, and crystallization rate G bear a relation to the composition of the blends, n increases with increasing content ofPcBR. K also increased with increasing content of PcBR. All of the K for the blends are greater than for pure iPP. The crystallization rate G (t_1/2) depends on the compositions in the blends; all G of the blends are greater than for iPP.     

Surface Segregation in Miscible Blends of Polystyrene and Poly(vinylmethyl ether): Comparison of Theory and Experiment

The effect of the interplay between bulk and surface free energy terms on surface segregation in miscible blends is probed by comparing angle-dependent x-ray photoelectron spectroscopy (ADXPS) measurements for polystyrene/polyvinylmethylether (PS/PVME) blends of with those for perdeuteropolystyrene/polyvinylmethylether (dPS/PVME) blends. The magnitudes of the bulk interaction parameters for the two systems differ markedly while the surface interactions are essentially identical. Experimental concentration depth profiles are almost identical for the two systems indicating that their surface properties are little affected by bulk interactions and dominated by surface energy effects.These data and previous data from our group are compared to the predictions of the square gradient theory developed by Schmidt and Binder in order to gain a more quantitative understanding of the factors that control surface segregation in miscible blends. While there is general qualitative agreement between theory and experiment, predicted surface compositions fall significantly below experimental values and predicted composition depth profiles decay more gradually than what is observed experimentally, especially for low PVME contents. The use of the more appropriate Sanchez-Lacombe-Balazs equation of state does not yield any significant improvement over the use of the Flory-Huggins lattice model for representing the bulk free energy terms. Careful analysis of the experimental behavior suggests that configurational effects associated with the flattening of surface adsorbed chains and differences in mer-mer interaction parameters in the bulk and near surface regions are possible origins for the discrepancies between theory and experiment.     

Mechanical Property,Crystal Morphology,and Nonisothermal Crystallization Kinetics of Poly(Trimethylene Terephthalate)/Maleinized Acrylonitrile-Butadiene-Styrene Blends

The mechanical properties, morphology, crystallization, and melting behaviors and nonisothermal crystallization kinetics of poly (trimethylene terephthalate)(PTT)/maleinized acrylonitrile-butadiene-styrene (ABS-g-MAH) blends were investigated by an impact tester, polarized optical microscopy, and differential scanning calorimetry (DSC). The results suggested that the ABS-g-MAH component served as both a nucleating agent for increasing the crystallization rate and as a toughening agent for improving the impact strength of PTT. When the ABS-g-MAH content was 5wt.%, the blend had the best toughness and a high crystallization rate. The blends showed different crystallization rates and subsequent melting behaviors due to their different ABS-g-MAH contents. The Ozawa theory and the method developed by Mo and coworkers were used to study the nonisothermal crystallization kinetics of the blends. The kinetic crystallization rate parameters suggested that the proper contents of ABS-g-MAH can highly accelerate the crystallization rate of PTT, but this effect nearly reaches saturation for ABS-g-MAH contents over 5%. The Ozawa exponents calculated from the DSC data suggested that the PTT crystals in the blends have similar growth dimensions as those in neat PTT, although they are smaller and/or imperfect. The effective activation energy calculated by the method developed by Kissinger also indicates that the blends with higher ABS-g-MAH content were easier to crystallize.     

Study on the Non-isothermal Melt Crystallization Kinetics of PTT/PBT Blends

Macro-kinetic models, namely the modified Avrami, Ozawa, Mo, and Kissinger models, were applied to investigate the non-isothermal melt crystallization process of PTT/PBT blends by DSC measurements. It was found that the modified Avrami model can describe the non-isothermal melt crystallization processes of PTT/PBT blends fairly well. When the cooling rates range from 5 to 20°C/min, the Ozawa model could be used to satisfactorily describe the early stage of crystallization. However, the Ozawa model didn't fit the polymer blends in the late stage of crystallization, because it ignored the influence of secondary crystallization. Under the conditions of the non-isothermal melt crystallization, it was found that the cooling rates and the blend composition affect the crystallization for blends according to Kissinger crystallization kinetics parameters. The crystallization kinetics constant K_a increases with increasing cooling rate, indicating the crystallization rates of PTT, PBT, and PTT/PBT blends were improved. The crystallization kinetic activation energy parameters are good agreement with the results from isothermal crystallization processes of the polymer blends. The crystallization activation energy of PTT/PBT blends is higher than the activation energy of PTT and PBT.     

Studies on the Nonisothermal Crystallization Behavior of Polypropylene/Multiwalled Carbon Nanotubes Nanocomposites

Polypropylene/multiwalled carbon nanotubes (PP/MWNTs) nanocomposites were prepared by a melt compounding process. The morphology and nonisothermal crystallization of these nanocomposites were investigated by means of optical microscopy, scanning electron microscopy, and differential scanning calorimetry. Scanning electron microscope micrographs of PP/MWNTs composite showed that the MWNTs were well dispersed in the PP matrix and displayed a clear nucleating effect on PP crystallization. Avrami theory, modified by Jeziorny and Mo's method, was used to analyze the kinetics of the nonisothermal crystallization process. It was found that the addition of MWNTs improved the crystallization rate and increased the peak crystallization temperature of the PP/MWNTs nanocomposites as compared with PP. The results show that the Jeziorny theory and Mo's method successfully describe the nonisothermal crystallization process of PP and PP/MWNTs nanocomposites.     

Study of the Nonisothermal Crystallization Kinetics and Melting Behaviors of Polypropylene Reinforced with Single-Walled Carbon Nanotubes Nanocomposite

Nonisothermal crystallization kinetics of polypropylene (PP) nanocomposite reinforced with 0.5 wt. % single-walled carbon nanotubes (SWNT) was characterized by differential scanning calorimetry at five different cooling and heating rates. The Avrami, Ozawa, and Seo-Kim kinetic models were used to describe the nonisothermal crystallization of the polymer and its nanocomposite. The addition of nano-filler, in general, improved the crystallization rate and increased the peak crystallization temperature of the nanocomposite as compared to PP. The results show that the Avrami and Seo-Kim models are suitable under different cooling rate conditions but that the Ozawa model is inappropriate for the nanocomposite. Equilibrium melting temperatures, derived from the linear Hoffman-Weeks equation, were shown to decrease in the nanocomposite. Additional analysis was performed based on the Thomson-Gibbs, Lauritzen-Hoffman, and Dobreva-Gutzowa theories, which were applied to take into account the lamellar thickness, nucleating agent, and nucleating activity of the nanocomposite in the nonisothermal melt crystallization process.     

Miscibility of Solution Blends of Unsaturated Polyester Resin with Polystyrene and Polycarbonate

Miscibility studies of unsaturated polyester resin (UPR) blends with two different thermoplastics—polystyrene (PS) and polycarbonate (PC), in a common solvent, chloroform, were carried out by viscosity, ultrasonic velocity, density, and refractive index methods. Two interaction parameters, μ and α were calculated using viscosity data for these blends. The positive interaction parameter values (μ and α > 0) obtained for the UPR/PS blend and the negative interaction parameter values (μ and α < 0) obtained for the UPR/PC blend indicate that the former is a miscible blend and the latter is an immiscible blend. These results were further confirmed by the ultrasonic velocity, density, and refractive index measurements.     

Morphology,Nonisothermal Crystallization Behavior and Mechanical Properties of Polypropylene Modified by Ionomers

The morphology and nonisothermal crystallization behavior of polypropylene modified by ionomers based on ethylene copolymers (Surlyn 8920 and 9320) were investigated by using scanning electron microscopy (SEM) and differential scanning calorimetry (DSC). The crystallization rate of polypropylene was accelerated by the ionomers which initiated heterogeneous nucleation of the polypropylene. At low ionomers content (0.25 wt%), Surlyn 8920, neutralized by sodium, was more efficient to enhance the crystallization rate of polypropylene than Surlyn 9320 (neutralized by zinc). The crystallization process of polypropylene modified by the ionomers was analyzed by different kinetics models. The study showed that the Mo approach was applicable for this system, whereas the Avrami, Jeziorny, and Ozawa methods were not. Furthermore, the notched impact strength of polypropylene modified by the ionomers was increased without any reduction of tensile strength and flexural modulus.     

Kinetics of Isothermal and Nonisothermal Crystallization of Poly(ethylene oxide) (PEO) in PEO/Fatty Acid Blends

In this work, isothermal and nonisothermal crystallization kinetics of poly(ethylene oxide) (PEO) and PEO in PEO/fatty acid (lauric and stearic acid) blends, that are used as thermal energy storage materials, was studied using differential scanning calorimetry (DSC) data. The Avrami equation was adopted to describe isothermal crystallization of PEO and nonisothermal crystallization was analyzed using both the modified Avrami approach and Ozawa method. Avrami exponent (n) for PEO crystallization was in the range 1.08–1.32 (10–90% relative crystallinity), despite of spherulites formation, while for PEO in PEO/fatty acid blends n was between 1.61 and 2.13. Hoffman and Lauritzen theory was applied to calculate the activation energy of nucleation (K_g) – the lowest value of K_g was observed for pure PEO, despite of heterogeneous nucleation of fatty acid crystals in PEO/fatty acid blends. For nonisothermal crystallization of PEO in PEO/lauric acid (1:1 w/w) and PEO/stearic acid (1:3 w/w) blends, secondary crystallization occurred and values of the Avrami exponent were 2.8 and 2.0, respectively. The crystallization activation energies of PEO were determined to be ?260 kJ/mol for pure PEO, ?538 kJ/mol for PEO/lauric acid blend, and ?387 kJ/mol for PEO/stearic acid blend for isothermal crystallization and ?135,6 kJ/mol, ?114,5 kJ/mol, and ?92,8 kJ/mol, respectively, for nonisothermal crystallization.     

Nonisothermal Crystallization Kinetics of Poly(lactic acid)/Nanosilica Composites

Poly(lactic acid) (PLA)/nanosilica composites were prepared by blending the PLA and nanosilica in chloroform and then evaporating the solvent to form the composite films in a dish. The Ozawa and Mo equations were used to characterize the nonisothermal cold crystallization kinetics of the PLA/nanosilica composites. The results indicated that the Ozawa equation was not successful while the Mo equation was successful to describe the nonisothermal crystallization kinetics of PLA/nanosilica composites. The values of crystallization activation energy (E _c) of the samples were calculated by the Kissinger method. Although the sample crystallization rates were enhanced with the increase of nanosilica content, the samples exhibited increased E _c in the presence of nanosilica. The results showed that nanosilica had an effect on both the nucleation and the crystal growth of PLA, promoting the nucleation but interfering with the molecular motion of PLA in the crystallization process.     

Glass Transition Behavior and Dynamic Fragility of PMMA-SAN Miscible Blend-Clay Nanocomposites

An investigation of the segmental dynamics and glass transition behavior of a miscible polymer blend composed of poly(methyl methacrylate) (PMMA) and poly(styrene-ran-acrylonitrile) (SAN) and its melt intercalated nanocomposite by dynamic mechanical analysis is presented. The principle goal was to address the effect of intercalation on local molecular structure and dynamics. The results showed that the intercalation of polymer chains in the galleries of organoclay (Cloisite 30B) led to a lower temperature dependence of the relaxation time (fragility) and activation energy of α-relaxation. Moreover, calculation of the distribution of the segmental dispersion showed a narrower dispersion in the glass transition region so that the Kohlrausch-Williams-Watts (KWW) distribution parameter (β_KWW) increased from 0.21 for neat PMMA to 0.34 for the 50/50 PMMA/SAN blend nanocomposite containing 3 wt% organoclay. Furthermore, the relaxation behavior of the blends showed a negative deviation from mixture law predictions based on the responses of the neat PMMA and SAN. These behaviors were attributed to the lack of specific interactions between the blend components (PMMA, SAN, and nanoclay layers) and the less cooperative behavior, i.e., less constraint for segmental relaxation, of the intercalated chains.     

Crystallization Behavior and Crystal Morphology of PTT/PBT Blends

The crystallization behavior and crystal morphology of the poly(trimethyl terephthalate) (PTT)/poly(butylene terephthalate) (PBT) blends were investigated by means of differential scanning calorimetry (DSC), wide angle X‐ray diffraction (WAXD) and polarized light microscopy (PLM) techniques. It was found that the two components crystallized simultaneously in the crystalline regions. The degree of crystallinity changed with PTT content. Crystalline properties were worse when the ratio of PBT and PTT contents was close to 50:50, but were better when PBT content was greatly different from PTT content.