Theoretical and Experimental Study of the Conformation and Vibrational Frequencies of N‐Acetyl‐L‐alanine and N‐Acetyl‐L‐alaninate

The vibrational frequencies of N‐acetyl‐L‐alanine (NAAL), its potassium salt (NAALK) and its free anionic form (NAAL^?) are calculated using density functional theory (B3LYP) combined with the 6‐311 + + G(d,p) basis set. The experimental Raman spectrum of solid NAALK and the scaling factors for calculated values are discussed as well. The three species are characterized by intramolecular NH…O hydrogen bonds leading to the formation of a five‐membered ring. As indicated by the intramolecular (N)H…O distances and by the ν(NH) frequencies, the strength of the intramolecular hydrogen bond is ordered as follows: NAAL^? < NAALK < NAAL^?. Owing to their difference in the coupling with other vibrational modes, the in‐plane and out‐of‐plane vibrations do not reflect the strength of the hydrogen bond.     

Spectral‐Luminescence and Generation Properties of 1‐Aza‐2‐Methyl‐6‐Aminopyrene and of Its Protolytic Forms

Spectral manifestations of protolytic forms of 1aza2methyl6aminopyrene in ethanol and aqueous solutions are investigated. The ionization constants of the protolytic forms are determined. The generation properties and photostability of a neutral molecule and a cation in excitation by an excimer XeCl laser are studied.     

Rheological Properties,Morphology, and Thermal Performance of E‐MA‐GMA/PC Blend

Blends of ethylene–methyl acrylate–glycidyl methacrylate terpolymer (E‐MA‐GMA, a random terpolymer) and polycarbonate (PC) were prepared in a Haake torque rheometer and the rheological properties, phase morphology, and thermal behavior were investigated. The graft reactions of PC terminal hydroxyl groups with the epoxy groups of E‐MA‐GMA and the in situ formation of the E‐MA‐GMA‐g‐PC copolymers at the interface were illustrated by the improved mixing torque and melt viscosity in E‐MA‐GMA/PC blends. Typical variation and significant deformation of the dispersed phase was observed in E‐MA‐GMA/PC blends with different composition, where PC was the matrix. With the E‐MA‐GMA content increasing, a complex co‐continuous phase structure with some dispersed E‐MA‐GMA particles wrapped in the continuous PC phase was present, indicating strengthened interfacial adhesion. When the E‐MA‐GMA content was higher than the PC component, fibrous structure of the dispersed PC phase in the E‐MA‐GMA matrix was caused by shear flow and interfacial interaction. DSC studies showed that the melting point of E‐MA‐GMA shifted to lower temperature with the increase of PC content, indicating that the enhanced interaction and graft structure hindered the process of crystallization and crystal growth.     

Structural Assignment of Isomeric S‐ and S,N‐1‐Alkoxycarbonylalkylated 6‐Amino‐2‐thiouracil Derivatives by Means of 1H and 13C NMR Spectroscopy

Abstract

The structures of new isomeric 2‐alkoxycarbonylalkylthio‐ and 2‐alkoxy‐ carbonylalkylthio‐1‐alkoxycarbonylalkyl‐6‐aminouracils (1–21) have been established on the basis of the ¹H NMR and ¹³C NMR spectroscopic data. The ¹H NMR and ¹³C NMR spectra of 1–21 have been fully assigned by a combination of two‐dimensional experiments [heteronuclear multiple quantum coherence (HMQC) and heteronuclear multiple bond correlation (HMBC)]. The ¹³C NMR spectra have been shown to be able to differentiate between isomers.     

Characterization of Mango Juice by High‐Resolution NMR,Hyphenated NMR,and Diffusion‐Ordered Spectroscopy

Abstract

The application of nuclear magnetic resonance (NMR) spectroscopy, hyphenated NMR, and diffusion‐ordered spectroscopy (DOSY) to the characterization of mango juice, as an example of a complex food mixture, is described. The compositional changes taking place as a function of ripening were followed, and selected metabolites were quantified by integration of the corresponding NMR peaks. In this way, an overall view of the metabolite changes is obtained, enabling the study of the biochemical mechanisms involved in the ripening process. More than 50 compounds were identified by 1D‐ and 2D‐NMR, but many ambiguous assignments remain due to spectral overlap or insufficient coupling information. The use of Liquid Chromatography (LC‐NMR) and LC‐NMR/Mass Spectrometry (MS) enables a fuller characterization of the soluble pectin fraction to be made; its dependence on ripening stage is discussed. Finally, DOSY adds information on the M_r of many metabolites, including the pectin fractions of ripe and unripe mango juices, and enables further peak assignments to be made.     

Preparation and Evaluation of the Morphology,Flammability, and Mechanical Properties of the Acrylonitrile‐Butadiene‐Styrene/Poly (vinyl chloride) Blends

Blends of two grades of acrylonitrile‐butadiene‐styrene (ABS) with three different compounds of poly (vinyl chloride) (PVC) were prepared via melt processing and their morphology, flammability, and physical and mechanical properties were investigated. SEM results showed that the ABS/PVC blend is a compatible system. Also, it can be inferred from fracture surface images that ABS/PVC blends are tough, even at low temperatures. It was found that properties of these blends significantly depend on blend composition and PVC compound type; however, the ABS types have only a small effect on blend properties. On blending of ABS with a soft PVC compound, impact strength, and melt flow index (MFI) increased, but tensile and flexural strength decreased. In contrast, blending of ABS with a rigid PVC compound improved fire retardancy and some mechanical properties and decreased MFI and impact strength.     

Steady‐State and Time‐Resolved Emission Studies of 6‐Methoxy Quinoline

Abstract

Steady‐state absorption, fluorescence excitation, and emission spectra of 6‐methoxy quinoline (6‐MQ) were measured at room temperature in cyclohexane, dioxane, ethanol, acetonitrile, water, and water–dioxane solvents. Absorption spectra of cyclohexane, n‐hexane, and isopentane solutions show resolved vibronic structure at room temperature. However, the excitation spectrum of cyclohexane solution is structureless and is found to be emission wavelength dependent, indicating the formation of at least two distinct species in the ground state. Similar behavior was observed in dioxane and water–dioxane solutions. For all other solutions, the fluorescence excitation spectrum of 6‐MQ was found to be the same for different emissions. Emission of 6‐MQ in all solvents consisted of two bands with their maxima around 355 nm (I) and 430 nm (II), the actual positions and the relative intensities being dependent on the solvent used. The bands I and II were respectively attributed to normal and protonated/H‐bonded species of either ¹L_a or ¹L_b states or mixed (¹L_a/¹L_b) state of ππ* character. Fluorescence decay of this dye in all solvents monitored over each emission maximum showed biexponential behavior, and the analysis yielded two different lifetime components for each emission band. The short and long fluorescence decay components were respectively in the range of 0.30–3.00 ns and 18–20 ns. The observed emission characteristics coupled with the nature of the fluorescence polarization spectra and two different decay components for each emission suggest the existence of two different conformers having two different excited electronic states.     

Structural Characterization of RF‐Sputtered a‐C:N Thin Films by Raman,IR, and X‐ray Reflectometry Spectroscopies

Abstract

Amorphous carbon nitride thin films (a‐C:N) were deposited from a carbon target, at room temperature onto silicon substrates, by reactive RF sputtering in a gas mixture of argon and nitrogen. The structural properties of these films have been studied by Raman, infrared (IR), and X‐ray reflectometry spectroscopies. Both the IR and Raman spectra of the a‐C:N films reveal the presence of C–C, C?C, C?N, and C≡N bonding types. The Raman spectra analysis shows, an increase of the C≡N triple bonds content when the concentration of nitrogen C(N₂) in the gas mixture is increased. The Raman intensities ratio between the disorder (D) and graphitic (G) bands increases with C(N₂) suggesting an increased disorder with the incorporation of nitrogen in the carbon matrix. The effect of C(N₂) on the density of a‐C:N films was also investigated by X‐ray reflectometry measurement. The increase of the nitrogen concentration C(N₂) was found to have a significant effect on the density of the films: as C(N₂) increases from 0 to 100%, the density of the a‐C:N films decreases slightly from 1.81 to 1.62 g/cm³. The low values of density of the a‐C:N films were related (i) to the absence of C–N single bonds, (ii) to the increase of disorder introduced by the incorporation of nitrogen in the carbon matrix, and (iii) to the presence of the bands around 2350 cm^?1 and 3400 cm^?1 associated with the C–O bond stretching modes and the O–H vibration, respectively, suggesting a high atmospheric contamination by oxygen and water. The presence of these bands suggests the porous character of the studied samples.     

The Composition,Sequence Analysis,and Crystallization Characterization of Poly(Trimethylene‐co‐Butylene Terephthalate) Copolymer

A series of poly(trimethylene‐co‐butylene terephthalate) (PTBT) copolymers were prepared by direct esterification followed by polycondensation. The composition and sequence distribution of the copolymers were investigated by nuclear magnetic resonance (NMR). The results demonstrate that the synthesized PTBT copolymers are block copolymers and the content of poly(butylene terephthalate) (PBT) units incorporated into the copolymers is always less than that in the polymerization feed. The 1,4‐butanediol consumption by a side reaction leads to a relatively lower content of PBT units in the resultant copolymers. At the same time, the PBT and poly(trimethylene terephthalate) (PTT) sequence length distributions in the copolymers are different. The PBT segments favor a longer sequence length than do the PTT segments in their corresponding enriched copolymers. The crystallization rate of the copolymers becomes lower than the homopolymers, especially for PTT‐enriched copolymers. Compared with the PTT segment, the presence of PBT segments in the copolymers seems to accelerate crystallization. A wide‐angle X‐ray diffraction (WAXD) analysis indicates PTT and PBT units do not co‐crystallize. The reduced melting temperatures of the copolymers may be attributed to a smaller lamellar thickness and lateral size due to short sequence lengths.     

Crystal Structures of Tetrakis‐(4‐chlorophenylthio)‐butatriene and Tetrakis‐(tert‐butylthio)‐butatriene

Tetrakis‐(4‐chlorophenylthio)‐butatriene (3a) and tetrakis‐(tert‐butylthio)‐butatriene (3b) were synthesized, and their crystal structures were determined. The compound 3a is monoclinic, space group P2₁/c, a=6.9785(8), b=8.6803(9), c=22.884(2) Å, β=93.887(6)^o, V=1383.0(3) ų, Z=2. The compound 3b is monoclinic, space group P2₁/n, a=11.0615(6), b=10.8507(4), c=11.2717(6) Å, β =116.427(2)^o, V=1211.5(1) ų, Z=4. The title compounds 3a and 3b reside on an inversion center so that only half of the molecule is crystallographically unique. Both compounds are not planar. The crystal structures of 3a and 3b have cumulated double bonds. The C7–C8–C8ⁱ and C5–C6–C6ⁱ angles that show the linearity in both structures, respectively, are 176.4(3)° in 3a and 175.6(2)° in 3b.     

Resonant Raman Scattering Spectra of Zn‐Phthalocyanine and Zn‐Phthalocyanine‐d 16

We obtained the resonant Raman scattering spectra of Znphthalocyanine and of its fully deuterated analog, Znphthalocyanined ₁₆. We performed calculation of normal vibrations and using it, interpreted the Raman scattering spectra. We characterized the form of vibration with the aid of potential energy distribution. For the majority of vibrations the calculation adequately describes the observed isotropic shifts. The correspondence between the vibrational states of Znphthalocyanine and metal complexes of tetrabenzoporphin has been established in confirmation of the proposed detailed interpretation of the spectra.     

Synthesis and Thermal Behavior of Silica‐Graft‐Polypropylene Nanocomposites Studied by Step‐Scan DSC and TGA

Silica graft poly(propylene) (silica‐g‐PP) nanocomposites were successfully prepared by radical grafting copolymerization and ring‐opening reaction. Their thermal properties were studied by step‐scan differential scanning calorimetry (SDSC) and thermogravimetric analysis (TGA). The exothermic peaks in the IsoK baseline (C_p,IsoK, nonreversing signal) of SDSC reveal that PP and silica‐g‐PP nanocomposites undergo melting‐recrystallization‐remelting during heating. The peak temperatures of recrystallization and remelting shift upward with the existence of nanoparticles in the PP matrix. The thermal degradation kinetics of silica‐g‐PP nanocomposites were investigated using nonisothermal TGA and the Flynn‐Wall‐Ozawa method. The results indicate that the thermal stability was significantly improved with increasing silica content, mainly because of the physical‐chemical adsorption of the volatile degradation products on the nanoparticles that delays their volatilization during decomposition, and the covalent interaction between nanoparticles and PP chains, which will also reduce the breakage of PP backbone chains.     

Preparation and Properties of Epoxy‐Clay Nanocomposites

Epoxy‐clay nanocomposites were synthesized to examine the effects of adding different contents of nanoclays on the physical, mechanical, and thermal properties of the epoxy resin system used in composite pipes manufacturing. Diglycidyl ether of bisphenol‐A (epoxy) with a cycloaliphatic amine heat curing hardner was reinforced by 1–7 wt.% of an organically modified type of montmorillonite. SEM results showed the change in failure of epoxy from brittle to tough mode by addition of nanoclays. X‐ray results indicated some degree of exfoliation by 1 wt.% clay and a decrease in d‐spacing in higher clay loadings after that. The heat‐distortion temperature of epoxy-clay nanocomposites increased from 125.5 to 138.7°C with 3 wt.% organoclay loading. Tensile and flexural modulus increased with increasing clay loading in this type of nanocomposite, but addition of organically modified clay decreased the tensile and flexural strengths and tensile elongation at break. Addition of 7 wt.% nanoclay improved the impact strength by 25.6%.     

Low‐temperature and high-pressure apparatus developed at ISSP,University of Tokyo

A high-pressure apparatus with cubic-anvil device has been successfully working for more than 10 years at low temperatures down to 2?K under quasi-hydrostatic pressure up to 10?GPa in study of solid-state physics. Main parts of it are composed of a set of compact cubic-anvils, a top-loading high-pressure cryostat and a 250?ton press. All the particulars of the cubic-anvil apparatus are given, including pressure calibrations at low temperature.     

Molecular and Crystalline Structure of 6,6'‐Dimethyl‐2,3,4,5,6,7‐Hexahydrobenzo[b]Furan‐3,4‐Dione

Different intermolecular compounds of 6,6'dimethyl2,3,4,5,6,7hexahydrobenzo[b]furan3,4dione have been investigated by IR spectroscopy and xray structural analysis methods. The relation between changes in the characteristic absorption bands of CH₂, CH₃, C=O, and C—O—C groups and the properties of the medium surrounding the molecule is established. Crystals of monoclinic syngony, of space group P2₁/n, are formed from a chloroformhexane mixture in crystallization. In the crystalline structure, shortened intermolecular contacts between the atoms of hydrogen of the CH₃ and CH₂ groups of cyclohexane cycles and the oxygen atom of the furan cycle, and also between the atoms of hydrogen of the CH₂ and CH₃ groups of both cycles and the oxygen of the cyclohexane cycle are revealed.     

Electrochemical Synthesis and Structure of Poly(2‐methyl‐1‐naphthylamine) Films

A novel polymer, poly(2‐methyl‐1‐naphthylamine), which was synthesized electrochemically at various temperatures from a solution containing 2‐methyl‐1‐naphthylamine, acetic acid and sodium acetate, was characterized by IR spectroscopy. The structural conclusions were based on comparisons of polymer spectra with the IR‐spectrum of the monomer, 2‐methyl‐1‐naphthylamine. IR spectroscopy indicates that the electropolymerization proceeds via the –NH₂ groups and that the poly(2‐methyl‐1‐naphthylamine) structure consists of imine (–N?C) and amine (–NH–C) links between naphthalene rings as well as a free methyl groups in the chains. An analysis of the “substitution pattern” region in the polymer's spectra suggests that the polymer molecules were formed via mixed N–C(4), N–C(5) and N–C(7) linkages between repeated units. The ratio of between the 1645 and 1620 cm^? 1 peak areas decreases with increased temperature during synthesis, indicating that 25°C is the best temperature to obtain higher molecular weights.     

Characterization and Spectral Study of 1,4‐Dimethylquinoxaline‐2,3‐dione Potassium Iodide Complex*

1,4‐Dimethylquinoxaline‐2,3‐dione potassium iodide complex was prepared, and its structure was determined by single crystal X‐ray diffraction. Elsewhere, solvent effects on the energy of excited and ground states of the complex in solution have been investigated by absorption and fluorescence spectroscopy. The change displayed by the photophysical properties of this complex in different solvents can be explained in terms of a sum of dielectric and hydrogen bonding effects taking part in the stabilization or destabilization of the structure     

Intramolecular Hydrogen Bond in Steroid 5‐Hydroxy‐6‐Ketones and 5‐Hydroxy‐6‐Ketoximes of the Stigmastane Series

The intramolecular hydrogen bond in steroid 5hydroxy6ketones and 5hydroxy6ketoximes of the stigmastane series has been investigated by the method of IR spectroscopy. It is shown that 5hydroxy groups in cisA/Bsteroids are linked by the intramolecular hydrogen bond with polar substituents at C₃ and C₆. These hydrogen bonds are lacking in corresponding transA/Bsteroids. According to the IR spectra, intramolecular associates of polymer type are formed in 5hydroxy6hydroxyminosteroids.     

Thermal Behavior of Polyamide‐12 and Poly (Styrene‐Co‐Acrylonitrile) Blend

In this work, an unusual morphology of a mixture of polyamide‐12 (PA‐12) with a series of poly (styrene‐co‐acrylonitrile) (SAN) was obtained by solution casting and fast solvent evaporation. The prepared film was transparent although it contained many crystals. These crystals apparently prevented phase separation despite the instability of the PA‐12 and SAN mixtures below 180°C. In isothermal experiments, once the crystals were melted, phase separation began and the scattered intensity fit the Cahn–Hilliard theory. When the AN content in the SAN copolymer was less than 5%, the phase separation took place when only part of the crystals were melted at 180°C. However, due to the constraint of unmelted crystals, the growth rate of phase separation at this temperature was much slower.     

Electroluminescence and Spectral Properties of N9‐Isobutyl‐2‐Oxo‐3‐Phenyl‐3N‐Benzo[F]Chromene‐9‐Sulfonamide

Experimental data on the synthesis and spectral properties (UV, IRFourier, xray photoelectronic, and luminescence spectra) of the sulfonamide derivative of benzocoumarin in an isopropanol solution and in a film applied by thermal vacuum deposition (TVD film) are reported. The use of TVD films of the investigated substance as electroluminophors is shown to be promising.