Metal-induced effects on the glass transition kinetics of glassy Se70Te30 alloy

The calorimetric measurements have been made in glassy Se₇₀Te₃₀ and Se₇₀Te₂₈M₂ (M?=?Ag, Cd, and Zn) alloys using non-isothermal differential scanning calorimetry technique to see the effects of Ag, Cd, and Zn additives on the glass transition kinetics of binary Se₇₀Te₃₀. From the heating rate dependence of glass transition temperature, T _g, different kinetic parameters of glass transition have been evaluated. The composition dependence of glass transition temperature T _g and the related activation energy (E_t ) is also discussed.     

Specific heat of around the glass transition

Dynamic calorimetric measurements are performed for the quaternary metallic glass Zr₆₅Al_7.5Cu_17.5Ni₁₀ in order to analyse the dependence on different heating rates for the glass transition temperature T_g. We compare two different temperature programs used for sample relaxation, to estimate the influence of the thermal history on T_g. A lower limit for the glass transition temperature T_g was calculated according to two different models based on the fact, that width and temperature of the glass transition depend on the experimental time scale set by the heating rate: One model assumes a Vogel-Fulcher-Tammann type behaviour, as used to describe more or less “fragile” glass formers and the other assumes an Arrhenius-like behaviour, which is related to “strong” glass formers. The values obtained from both models differ by about 80K. From additional absolute specific heat capacity measurements we calculate the Kauzmann temperature T_K, as a lower limit for the temperature of the glass transition from thermodynamic aspects. Comparing T_K with the temperature values obtained from the two evaluation models we can classify the quaternary metallic glass Zr₆₅Al_7.5Cu_17.5Ni₁₀, to behave more like a “strong” glass former. Received: 23 January 1998 / Received in final form and Accepted: 31 August 1998     

Crystallization kinetics and thermal stability in Se85-xTe15Sbx chalcogenide glasses

Crystallization process of Se_85-xTe₁₅Sb_x (x = 2.7, 7.5, 10 and 15 at %) chalcogenide glasses has been studied by using differential scanning calorimetry (DSC) with different heating rates. These glasses are found to have a double glasses transition and overlapped crystalline phases for Se₇₀Te₁₅Sb₁₅ glass while single glasses transition and single crystallization stage for other glasses. Glass transition temperature, T_g, onset crystallization temperature, T_c, and peak crystallization temperature, T_p, are found to be dependent on composition and heating rates. Values of various kinetic parameters such as activation energy of glass transition, E_g, activation energy of crystallization, E_c, Hurby number, H_r, thermal stability, S_p, rate constant, K_p, and Avrami exponent, n, are determined for the present systems. Results indicate that rate of crystallization is dependent on thermal stability and glass-forming ability. Crystallization mechanism occurs in two dimensions for studied compositions. Crystalline phases resulting from DSC and scanning electron microscopy have been identified by using X-ray diffraction.     

Glass transition,thermal stability and glass-forming ability of Se90In10− x Sb x (x = 0, 2, 4, 6, 8, 10) chalcogenide glasses

Differential scanning calorimetry (DSC) has been employed to investigate the glass transition activation energy E _g, thermal stability and glass-forming ability (GFA) of Se₉₀In_{10? x} Sb _x (x = 0, 2, 4, 6, 8, 10) chalcogenide glasses. DSC runs were performed at six different heating rates. Well-defined endothermic and exothermic peaks were obtained at glass transition and crystallization temperature. The dependence of glass transition temperature T _g on heating rate (α), as well as composition of Sb, has been studied. From the dependence of glass transition temperature on heating rate, the E _g has been calculated on the basis of the Kissinger [Anal. Chem. 29 (1957) p.1702] and Moynihan [J. Phys. Chem. 78 (1974) p.267] models. Thermal stability has been monitored through the calculation of temperature differences T _c–T _g, the stability parameter S, and the enthalpy released during crystallization H _c. The GFA has been investigated on the basis of the Hruby parameter H _r, which is strong indicator of GFA. Results for GFA are in good agreement with fragility index F _i calculations, indicating that Se₉₀In₆Sb₄ is an excellent glass-former.     

Thermal stability and crystallization kinetics of Ge–Se–Cd glasses

The effect is reported of varying cadmium concentration on the glass transition, thermal stability and crystallization kinetics of Ge₂₀Se_{80? x} Cd _x (x = 2.5, 5, 7.5 and 10 at. %) glasses. Differential scanning calorimetry results under non-isothermal conditions for the studied glasses are reported and discussed. The values of the glass transition temperature (T_g ) and the peak temperature of crystallization (T_p ) were found to be dependent on heating rate and Cd content. From the heating rate dependence of T_g and T_p , the values of the activation energy for glass transition (E_g ) and the activation energy for crystallization (E_c ) were evaluated and their composition dependence discussed. The thermal stability of the glasses was evaluated using various thermal stability criteria such as ΔT, H_g and S. The stability calculations emphasize that the thermal stability decreases with increasing Cd content.     

Determination of kinetics parameters of glass transition in glassy Se and glassy Se98M2 alloys using DSC technique

Glassy Se and Se₉₈M₂ (M = Ag, Cd, Zn) alloys are obtained by the melt quenching technique. Differential Scanning Calorimetry (DSC) technique (under non-isothermal conditions) has been applied to see the effects of Ag, Cd, and Zn additives on the glass transition kinetics of Se-rich glassy alloys at different heating rates. The variation of glass transition temperature, T _g with the heating rate, β has been used to investigate the glass transition kinetics. The values of various kinetic parameters such as glass transition temperature, activation energy of glass transition, overall mean bond energy 〈E〉, heat of atomization H _S , bond strength (Se–M) have also been calculated.     

α-Fe2O3单离子磁晶各向异性的计算及Morin转变的解释

本文根据晶场理论计算了α-Fe₂O₃的单离子磁晶各向异性。采用点电荷模型,计及近邻及次近邻对晶场的贡献,并考虑到近邻O^2-离子对次近邻Fe³⁺离子的电屏蔽效应,在六级微扰近似下,得到单离子各向异性场H_si=102.3×10²Oe。这一结果结合Artman等人对磁偶极各向异性的计算,导出了α-Fe₂O₃的Morin转变温度T _关键词：     

Autoadhesion of High‐Molecular‐Weight Monodisperse Glassy Polystyrene at Unexpectedly Low Temperatures

Abstract

Healing of symmetric interfaces of amorphous anionically polymerized high‐ and ultrahigh‐molecular weight (HMW and UHMW, respectively) polystyrene (PS) in a range of the weight‐average molecular weight M _w from 102.5 (M _w/M _n = 1.05) to 1110 kg/mol (M _w/M _n = 1.15) was followed at a constant healing temperature, T _h, well below the glass transition temperature of the polymer bulk [T _g‐bulk = 105–106°C as measured by differential scanning calorimeter (DSC)]. The bonded interfaces were shear fractured in tension on an Instron tester at ambient temperature. Autoadhesion at symmetric HMW PS–HMW PS and UHMW PS–UHMW PS interfaces was detected mechanically after healing at T _h = 38°C for 107 hr, and even at 24°C (for longer healing times). The occurrence of autoadhesion between the surfaces of the UHMW PS with M _w = 1110 kg/mol at 24°C implies that the glass transition temperature at the interface, T _{g‐interface}, of this polymer was a least lower: by 82°C than its DSC T _g‐bulk, by 30–40°C than the Vogel temperature, T _∞—the lowest theoretical value of a kinetic T _g‐bulk at infinite long time—and by 20°C than T ₂ (a “true” thermodynamic T _g‐bulk corresponding to a second‐order phase transition temperature). To our knowledge, this is the first observation of such nature, which gives further evidence of the lowering of the T _g at polymeric surfaces and the persistence of this effect at early stages of healing of polymer–polymer interfaces.     

Kinetics of glass transition and thermal stability of?Se58Ge42?xPbx?(9≤x≤20) glasses

Se₅₈Ge_42−x Pb _x (9≤x≤20) glasses have been prepared using conventional melt quenching technique. Differential Scanning Calorimetric (DSC) measurements show single glass transition and double crystallization, which indicate the occurrence of phase separation in the samples. The phases present in the samples were identified using XRD. The kinetics of the glass transition has been studied in terms of the variation of glass transition temperature with composition and heating rate. In addition to this, activation energy of the glass transition (E _t ) has also been evaluated and its composition dependence is also investigated. The thermal stability of these glasses has been investigated using various stability criteria: Deiztal first glass criterion, ΔT, Saad and Poulain weighted thermal stability, H′ and the S-parameter. The values of these parameters were obtained using various characteristic temperatures such as the glass transition temperature, T _g , the onset temperature of crystallization, T _c , and the peak crystallization temperature, T _p . The values of stability parameters show that the phase corresponding to second crystallization is more stable than the phase corresponding to first one. The stability in terms of the lead (Pb) content has been determined considering the values of stability parameters of the phase corresponding to second peak. It was found that the stability increases with the lead content.     

Time-temperature superposition and relaxational behavior in polymeric glasses

It is shown that a free-volume treatment of the relaxational behavior of a polymer can be extended into the glassy region. A modified form of the WLF equation is derived in which the temperature is replaced by T_e, a parameter related to the “frozen” free volume in the glass and defined such that Te = T at equilibrium. Measurements of the isothermal volume contraction of polystyrene and poly(methyl methacrylate) between ?20 and + 95°C are used to estimate the “frozen” free volume and to calculate the temperature dependence of log(a_T) below Tg. The calculated shift factors are compared to experimental values for the glassy state, and good agreement is obtained by selecting an arbitrary, but reasonable, equilibrium glass volume-temperature curve. The slope of this equilibrium glass curve is smaller than the experimental volume curve at some finite cooling rate. The data indicate that the glass is not an “iso-free volume” state and that the relaxation mechanisms in the glass are controlled primarily by the free volume, at least in the vicinity of Tg. A quantitative definition of the role of free volume in the glassy state requires evaluation of the quantities ? log a_T/?V)_T,P and (? log a_T/?T)_v,p; sufficient data of this type are not presently available.     

Glass-forming ability and thermal stability of Fe<Subscript>62</Subscript>Nb<Subscript>8−x</Subscript>Zr<Subscript>x</Subscript>B<Subscript>30</Subscript> and Fe<Subscript>72</Subscript>Zr<Subscript>8</Subscript>B<Subscript>20</Subscript> amorphous alloys?

Glass-forming ability (GFA) and thermal stability of Fe₆₂Nb₈B₃₀, Fe₆₂Nb₆Zr₂B₃₀ and Fe₇₂Zr₈B₂₀ at % amorphous alloys were investigated by calorimetric (DSC and DTA) measurements. The crystallization kinetics was studied by DSC in the mode of continuous versus linear heating and it was found that both the glass transition temperature, T _g , and the crystallization peak temperature, T _p , display strong dependence on the heating rate. The partial replacement of Nb by Zr leads to lower T _g and T _x temperatures and causes a decrease of the supercooled liquid region. JMA analysis of isothermal transformation data measured between T _g and T _x suggests that the crystallization of the Fe₆₂Nb₈B₃₀ and Fe₆₂Nb₆Zr₂B₃₀ amorphous alloys take place by three-dimensional growth with constant nucleation rate. Nb enhances the precipitation of the metastable Fe₂₃B₆ phase and stabilizes it up to the third crystallization stage. Zr addition increases the lattice constant of Fe₂₃B₆ and, at the same time, decreases the grain size.     

Calorimetric study of Te15(Se100− x Bi x )85 glassy alloys using differential thermal analysis

A calorimetric study of Te₁₅(Se_{100? x} Bi _x )₈₅ glassy alloys (x = 0, 1, 2, 3 and 4 at. %) is reported. Differential thermal analysis (DTA) was performed at heating rates of 10, 15, 20 and 25 K/min. The spectra were used to determine the glass transition temperature, T_g , the crystallisation temperature, T_c and the melting temperature, T_m . All these parameters shift to higher values with increasing heating rate, β. The glass transition temperature and the melting temperature increase, and the crystallisation temperature decreases, with increase in the Bi content, x. The activation energy of the glass transition, E_g , was evaluated using the Moynihan and Kissinger methods. The activation energy of crystallisation, E_c , was calculated using modified Kissinger and Matusita approaches. The thermal stability of these glasses has been studied and found to decrease with increase in Bi content. The results obtained are explained on the basis of a chemically ordered network model and an average coordination number.     

Differential scanning calorimetric study of Ga5Se95 glass

Results of differential scanning calorimetry, at different heating rates, α, on Ga₅Se₉₅ glass are reported and discussed. From the heating rates dependence of values of T_g and T_p, the glass activation energy, E_g and the crystallization activation energy, E_c, are derived. The crystallization results are interpreted in terms of recent analyses developed for non-isothermal crystallization and also for the evaluation of E_c. The crystallization mechanism is then characterized. From the obtained results, the glassy Ga₅Se₉₅ has two-dimensional growth, the average value of the order of crystallization mechanism, n is 3. The average value of the glass activation energy, E_g and crystallization activation energy, E_c, for Ga₅Se₉₅ glass are 189±4 and 69±5 kJ/mol, respectively.     

A comparative study on the glass-forming ability of some alloys in the Sb-As-Se system by differential scanning calorimetry

The glass-forming ability and devitrification of alloys in the Sb-As-Se system have been studied by differential scanning calorimetry (DSC). A comparison of various simple quantitative methods to assess the level of stability of glassy materials in the above-mentioned system is presented. All these methods are based on the characteristic temperatures, obtained by heating of the samples in non-isothermal regime, such as the glass transition temperature, T_g, the temperature at which crystallization begins, T_in, the temperature corresponding to the maximum crystallization rate, T_p, or the melting temperature, T_m. In this work, a kinetic parameter K_r(T) is added to the stability criteria. The thermal stability of some ternary compounds of Sb_xAs_{0.60−(2x+y)}Se_0.40+x+y-type has been evaluated experimentally and correlated with the activation energies of crystallization by this kinetic criterion and compared with those evaluated by other criteria.     

Crystallization kinetics of a-Ga5Se95−xSbx

The kinetics studies of a-Ga₅Se_95−xSb_x (x=0, 1, 5, 10) is analyzed by an isothermal and non-isothermal technique. By isothermal technique the analysis of crystallization kinetics is taken at temperatures between the glass transition and crystallization. The activation energy of crystallization (ΔE_c) and order parameter (n) are calculated by fitting the values of extent of crystallization (α) in the Avrami's equation. By non-isothermal technique crystallization kinetics of a-Ga₅Se_95−xSb_x (x=0, 1, 5, 10) with different heating rates of 5, 10, 15 and 20 K/min have been studied by using the Differential Scanning Calorimeter (D.S.C.). The glass transition temperature, crystallization temperature at different heating rates and structural change during glass transition has been determined from an empirical relation. From the heating rate, the dependence of the glass transition and crystallization temperatures, the activation energy for structural relation (Δe_t), the activation energy of crystallization (ΔE_c), and the order parameter (n) are calculated.     

Evidence for ordered regions in poly(n-butyl)methacrylate from light-scattering studies

From light-scattering studies on polybutylmethacrylate, a polymeric glass, the variation of the velocity and attenuation of thermally excited hypersonic phonons with temperature has been measured. Measurement of the temperature dependence of the ratio of the intensity of the Rayleigh line to the Brillouin lines is interpreted as due to a configurational rearrangement within the glass above the glass transition temperature, T_g . Only light scattered from longitudinal phonons was observed. The distinct change in the temperature dependence of the velocity, attenuation and intensity ratio identified the glass transition.

For samples annealed well above T_g, T_g was found to be about 0°C from the light-scattering studies, 12°C from differential scanning calorimetry (DSC), and 20°C from refractive index measurements. For an unannealed sample the behaviour of the above parameters with temperature was found to be different. T_g for the unannealed sample was 14°C from light-scattering, 18°C from DSC and 20°C from index of refraction measurements.     

Electrical properties of polylactides

A PLA film with low crystalline-phase content was investigated in a DC field within the temperature range of 25–70 °C. The polymer exhibits low electrical conduction with increasing activation energy within the area of the glass transition temperature. Electrets were made from the PLA film precursor using an isothermal polarization method. The charge on the electrets was assessed by measuring the field intensity. The surface charge of an electret has the character of a hetero-charge. After 4 months from termining the isothermal charging and cooling, the PLA film polarized at E_p > 16.7 MV/m was affirmed the applicable electret properties.     

Control of Crystallization Kinetics and Study of the Thermal, Structural and Morphological Properties of an Li2O–B2O3–Al2O3 Vitreous System

A glass matrix with nominal composition 50Li₂O·45B₂O₃·5Al₂O₃ (mol%) was synthesized, and its physical properties were investigated by differential thermal analysis (DTA), X-ray diffraction (XRD), and atomic force microscopy (AFM). The glass transition temperature T _g, the crystallization-onset temperature T _x,, the crystallization peak temperatures T _c1 and T _c2, and the fusion peak temperatures T _m1 and T _m2 were determined from at least two glass matrix phases to be approximately 382, 457, 486, 574, 761, and 787?°C, respectively, at 5?°C/min heating rate. Heat treatments at 450?°C for an increasing sequence of time intervals allowed control over the amount of crystallization. Additional information on the crystallization kinetics for the LBA glass matrix was gathered from AFM images, DTA thermograms, and XRD diffractograms. The latter technique showed that LiBO₂ (ICDD-16568) and Li₃AlB₂O₆ (ICDD-51754) phases are formed in the glass?Cceramic system. Debye?CScherrer analysis of the XRD peaks revealed a competition between the evolutions of crystal phases during heat treatment. Activation energies for crystallization, obtained from theoretical models applied to the DTA data showed that the crystallization is heterogeneous. The AFM images demonstrated that this heterogeneous crystallization starts at the surface of the LBA glass matrix and identified crystal sizes in agreement with the results of the Debye?CScherrer analysis. Our study shows that thermal and structural characterization techniques can be combined with theoretical results drawn from well-tested models to offer a unified view of crystallization in a glass?Cceramics system.     

Enthalpy Relaxation Study of Poly(Vinyl Chloride) Films Based on the Time-Temperature Superposition Principle

Abstract

In the enthalpy relaxation of poly(vinyl chloride), a decrease in enthalpy upon the isothermal ageing was measured using the differential scanning calorimetry method as a function of ageing time (t_A) and ageing temperature. The range of the ageing temperature was from 56?°C (T_g ? 25?°C) to 72?°C (T_g ? 9?°C) where T_g denotes the glass transition temperature. The limiting value of the decrease in enthalpy was determined by applying a stretched exponential function to the measured enthalpy data. The relaxation function (?) was derived from the measured enthalpy and the construction of a master curve was tried by shifting the ? ? t_A curves of the respective ageing temperatures horizontally. Although there was no agreement between the shift factors (a_T) and the relaxation times of the ? ? t_A curves, the superposition was successfully constructed and the a_T values obtained for the poly(vinyl chloride) sample were found to be comparable to those reported for viscoelastic experiments over a broad temperature range above and below T_g carried out for different polymers. The origin of the decrease in enthalpy was briefly discussed in terms of the chain dynamics in the isothermal condition.     

Crystallization kinetics in new Sb14As29Se52Te5 amorphous glass

Differential scanning calorimetry (DSC) under non-isothermal conditions is used to study the crystallization kinetics of Sb₁₄As₂₉Se₅₂Te₅ chalcogenide glass. In addition, two approaches are used to analyze the dependence of glass transition temperature (T_g) on the heating rate (α). One is empirical linear relationship between (T_g) and ln(α). The second approach is the use of straight line vs. 1/T_g for the evaluation of the activation energy for glass transition. The phases at which the alloy crystallizes after the thermal treatment have been identified by using X-ray diffraction. The diffractogram of the transformed material shows the presence of some crystallites of As, Te, AsSb, As₂Se₃, Sb₂Se₃ and AsSe_.5Te_.5 in the residual amorphous matrix.