Preparation of PVDF-HFP Microporous Membranes via the Thermally Induced Phase Separation Process

The thermally induced phase separation (TIPS) process was employed to prepare poly (vinylidene fluoride-co-hexafluoropropylene; PVDF-HFP) microporous membranes using sulfolane as the diluent. The phase diagram of the PVDF-HFP/sulfolane system was drawn and analyzed. The effects of polymer content in casting solution and cooling rate on the cross-sectional morphology, crystallinity, crystal structure, and porous structure of the resulting membranes were investigated using scanning electron microscopy (SEM), differential scanning calorimetry (DSC), X-ray diffraction (XRD), and a mercury porosimeter, respectively. The mechanical properties of the membranes were evaluated by tensile tests. It was found that a solid-liquid phase separation occurred in the PVDF-HFP/sulfolane system. Spherulites and “net-shaped” structures coexisted in the obtained membranes. Polymer content and cooling rates had some influences on the crystallinity, porous structure, and mechanical properties of the membranes, but no influence on the polymer crystal structure of the membranes.     

Nonisothermal Crystallization Kinetics of Poly(Vinylidene Fluoride) in a Poly(Vinylidene Fluoride)/Poly(Methyl Methacrylate)/Dipropylene Glycol Dibenzoate System via Thermally Induced Phase Separation

The nonisothermal crystallization kinetics of poly(vinylidene fluoride) (PVDF) in PVDF/polymethyl methacrylate (PMMA)/dipropylene glycol dibenzoate (DPGDB) blends, where DPGDB served as a diluent, via solid–liquid (S-L) phase separation during a thermally induced phase separation process was investigated through differential scanning calorimetry (DSC) measurements. It was found that the Ozawa model could only describe the nonisothermal crystallization behavior of PVDF/PMMA/DPGDB system to some extent. The influence of the cooling rate and PMMA/PVDF weight ratio in the PVDF/PMMA/DPGDB system on the crystallization mechanism was also examined based on the Avrami–Jeziorny method and Mo method. Primary crystallization and secondary crystallization were observed in the Avrami–Jeziorny analysis. The analysis by the Avrami–Jeziorny and Mo models indicated that the increase of PMMA/PVDF weight ratio decreased the crystallization rate during the primary crystallization stage. The results showed that the Mo method could well explain the kinetics of the primary PVDF crystallization. The Avrami–Jeziorny method, however, could not well describe the nonisothermal crystallization process of PVDF in the primary crystallization stage. The activation energy, determined by the Kissinger method, was not suitable to reflect the PVDF crystallization process in the PVDF/PMMA/DPGDB system.     

Poly(vinylidene fluoride) Crystallization Behavior and Membrane Structure Formation Via Thermally Induced Phase Separation with Benzophenone Diluent

Microporous poly(vinylidene fluoride) (PVDF) membranes were prepared by thermally induced phase separation (TIPS) at different quenching temperatures with benzophenone as the diluent. The crystallization behavior and crystal structure of PVDF in PVDF/benzophenone systems were investigated by differential scanning calorimetry (DSC) and wide angle X‐ray diffraction (WAXD). The different PVDF concentrations had a remarkable effect on PVDF crystallization behavior and resulted in different membrane structures. Spherulitic structures were vague when the PVDF/benzophenone solution was quenched to ?8°C; however, discernable spherulitic structures were obtained when quenched to 34 and 49°C. Additionally, two phase separation mechanisms (solid–solid (S–S) and solid–liquid (S–L) phase separation) were observed during membrane preparation. It was revealed by scanning electron microscopy (SEM) that microporous membranes had more discernable spherulitic structures formed by S–L phase separation than by S–S phase separation, which induced macrovoids and irregular pores on the fracture surfaces of membranes.     

Effect of PMMA on crystallization behavior and hydrophilicity of poly(vinylidene fluoride)/poly(methyl methacrylate) blend prepared in semi-dilute solutions

Films of poly(vinylidene fluoride) (PVDF)/poly(methyl methacrylate) (PMMA) blend were derived from a special procedure of casting semi-dilute solutions. Hydrophilic character and crystallization of PVDF were optimized by variation of PMMA concentration in PVDF/PMMA blends. It was found that a PVDF/PMMA blend containing 70 wt% PMMA has a good performance for the potential application of hydrophilic membranes via thermally induced phase separation. The films presented β crystalline phase regardless of PMMA content existed in the blends. Thermal analysis of the blends showed a promotion of crystallization of PVDF with small addition of PMMA which induced larger lamellar thickness of PVDF, leading to the largest spherulitic crystal of PVDF (10 wt% PMMA) is about 8 μm. SEM micrographs illustrated no phase separation occurred in blends, due to the high compatibility between PVDF and PMMA.     

Unusual Phase Separation Kinetics in Poly(Methyl Methacrylate)/Poly(Styrene-co-Acrylonitrile) (PMMA/SAN) Blends with PMMA of Different Molecular Weights

The influence of molecular weight of poly (methyl methacrylate) (PMMA) on the thermodynamics and dynamics of phase separation in PMMA/poly (styrene-co-acrylonitrile) (SAN) blends was investigated via optical microscopy, time-resolved small-angle light scattering (SALS), and dynamic rheological measurements. It was found that the cloud point temperature of the blends decreased with an increase in the molecular weight of the PMMA. The phase separation rates of PMMA 48K/SAN and PMMA 85K/SAN blends with the near-critical composition were almost the same at small quench depths due to the limited mobility of molecular chains at low temperatures. However, an unexpected phase separation dynamics was observed at larger quench depths. Not only the morphology evolution but also the apparent diffusion coefficient D_app calculated from SALS revealed that the phase separation rate was faster in the PMMA 85K/SAN blend than in the PMMA 48K/SAN blend. The possible reasons for this unusual rapid kinetics of phase separation observed in the higher molecular weight blend were discussed in terms of molecular mobility and viscoelasticity.     

Crystallizaion and surface morphology of poly(vinylidene fluoride)/poly(methylmethacrylate) films by solution casting on different substrates

The dependence of surface structure of the poly(vinylidene fluoride) (PVDF)/poly(methylmethacrylate) (PMMA) films by solution casting on properties of seven substrates was investigated by wide angle X-ray diffraction (WAXD), Fourier transform infrared (FTIR), scanning electron microscope (SEM) and differential scanning calorimetry (DSC). It was revealed that the polyblend films obtained by casting onto each substrate contained exclusively β phase PVDF. Higher crystallinity of the film was obtained by casting onto ceramic, polytetrafluoroethylene (PTFE), copper (Cu), stainless steel and glass substrates than that by casting onto aluminium (Al) and polypropylene (PP) substrates, depending on the degree of close lattice matching. The surface crystalline structure of PVDF was strongly affected by the wettability of substrate. The largest size of PVDF spherulitic crystal structure with about 6 μm presented in the casting film grown at the air/solution interface on glass substrate, while the smallest spherulite size with about 3 μm was generated by casting onto PTFE, stainless steel and PP substrates. It implied that the higher surface tension the substrate had, the larger PVDF spherulite grew at the air/solution interface.     

Morphology,Structure, and Crystallization of LaCl Modified Hollow Glass Microspheres/ Poly(vinylidenefluoride) Composites

Poly(vinylidene fluoride)/hollow glass microspheres (PVDF/HGMs) composites were prepared by using lanthanum chloride surface modified HGMs. The morphology, structure, and crystallization of the PVDF/HGMs composites were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), and differential scanning calorimetry (DSC), respectively. The results showed that the interaction between the HGMs and the PVDF was improved by lanthanum chloride modification. The crystal structure of the PVDF was not changed by the HGMs, but the crystallinity was decreased. In addition, the Jeziorny and the Mo methods were used to analyze the non-isothermal crystallization kinetics. The results showed that the HGMs decreased the crystallization rates and extended the crystallization time of the PVDF.     

Phase Separation in Poly(Methyl Methacrylate)-Epoxy Blend

Diglycidyl ether of bisphenol A (DGEBA) epoxy resin was modified with high molecular weight poly(methyl methacrylate) (PMMA). Morphological variations of a 2 wt% PMMA-modified epoxy mixture were studied by optical microscopy and scanning electron microscopy (SEM). A PMMA-epoxy blend cured at 100°C revealed that a secondary phase morphology was observed in both epoxy and PMMA phases from the early stages of the phase separation process. A morphology consisting of a rough striated continuous phase along with large smooth regions was observed by SEM, confirming the secondary phase separation. The dynamic mechanical thermal analysis showed that the PMMA modification of epoxy at such a low PMMA concentration of 2 wt% has no major influence on the glass transition temperature of the epoxy-rich phase. The PMMA-epoxy blend showed a slight increase in the flexural properties and the fracture toughness.     

Morphology,Crystallization and Formation Mechanism of Poly(Vinylidene Fluoride) Membranes Prepared with Immersion Precipitation: Effect of Maturation Time

Poly(vinylidene fluoride) (PVDF) membranes were prepared by the immersion precipitation method. Effects of the maturation time of dopes on the morphology and crystallization of the prepared membranes were investigated. The analysis showed that the maturation time played an important role in determining the morphology of the prepared membranes. For the dope prepared in the initial day, liquid–liquid demixing preceded solid–liquid demixing in the process of the membrane formation. The morphology of the cross section of the prepared membrane (M1) was finger-like structures with a sponge substrate beneath the porous skin. During the maturation, the dopes underwent a microscopic phase separation and the PVDF crystallized, which resulted in the existence of micro-liquid phases and micro-solid phase crystalline areas in the dopes. In the process of the membrane formation, liquid–liquid demixing took place by nucleation and growth of droplets of the polymer rich phase in the micro-liquid phase. The micro-solid phase crystallites were connected together by the polymer chains, and formed a three-dimensional network gelation morphology. The crystal structure of M1 was mainly β crystals. With increasing maturation time of the dopes, the proportion of β decreased crystals, but that of α crystals increased for the prepared membranes.     

Study on the Nonisothermal Crystallization Kinetics of Poly(Vinylidene Fluoride)/Tributyl Citrate Blends Via Thermally Induced Phase Separation

The nonisothermal crystallization kinetics of poly (vinylidene fluoride) (PVDF) in PVDF/tributyl citrate (TBC) blends having undergone thermally induced phase separation were investigated through differential scanning calorimetry measurements. Ozawa theory, Mo's method and Kissinger model were used to analyze the kinetics of the nonisothermal crystallization process. The Ozawa theory failed to describe the crystallization behavior of PVDF in the PVDF/TBC blends, whereas the Mo model was able to describe the nonisothermal crystallization process fairly well. The crystallization activation energy was determined by the Kissinger method, and was in the range of 90–165 kJ/mol.     

Thermal behavior and structure of liquid-crystalline aromatic-aliphatic polyester/poly(tetramethylene oxide) block copolymers

The thermal behavior and structure of poly(hexamethylene p,p′-biben-zoate) (BB-6)/poly(tetramethyleneoxide) (PTMO) block copolymers (BB-6/PTMO) were studied using differential scanning calorimetry, polarizing optical microscopy, and wide-angle and small-angle x-ray diffractometry. As the PTMO fraction increases, BB-6 liquid crystallinity decreased and two transition temperatures [Tc→M (crystal-mesophase) and Tm→i (mesophase-isotropic melt)] move to lower temperatures. BB-6/PTMO containing less than 20 mol% of PTMO retains liquid crystallinity. The isotropic melt-mesophase transition exotherm of BB-6/PTMO in the cooling process moves to lower temperature with increasing PTMO. Contrary to the isotropic melt-mesophase transition, the mesophase-crystal transition exotherm moves to higher temperature, indicating that PTMO segments favor the molecular mobility of BB-6 segments. As the mole fraction of BB-6 increases, the texture indicative of the smectic liquid crystal is gradually disorganized. BB-6/PTMO containing more than 30 mol% of PTMO no longer forms the texture indicative of smectic liquid crystals.     

Effect of amphiphilic hyperbranched-star polymer on the structure and properties of PVDF based porous polymer electrolytes

An amphiphilic hyperbranched-star polymer (HPE-g-MPEG) was synthesized by grafting methoxy poly(ethylene glycol) to the end of the hyperbranched polyester (HPE) molecule using terephthaloyl chloride (TPC) as the coupling agent. The synthesized amphiphilic hyperbranched-star polymer was blended with poly(vinylidene fluoride) (PVDF) to fabricate porous membranes via typical phase inversion process, and then the membranes were filled and swollen by a liquid electrolyte solution to form polymer electrolytes. The influences of HPE-g-MPEG on the morphology, crystallinity, liquid electrolyte uptake, mechanical properties of the porous membranes and the electrochemical properties of the activated membranes were investigated. It was found that the addition of HPE-g-MPEG resulted in a significant increase in porosity and a considerable reduction in crystallinity of the blend membranes, which favored the liquid electrolyte uptake and, consequently, led to a remarkable increase in ion conductivity at ambient temperature. The maximum ion conductivity observed in this study was 1.76 × 10^? 3 S/cm at 20 °C for the blend membrane with a HPE-g-MPEG/PVDF ratio of 3/10 (w/w).     

Preparation of Symmetric Network PVDF Membranes for Protein Adsorption via Vapor-Induced Phase Separation

Symmetric network poly(vinylidene fluoride) (PVDF) membranes without a dense skin layer were prepared by vapor-induced phase separation from a PVDF/N,N-dimethylacetamide (DMAc)/water system. The effects of evaporation atmosphere, temperature, and humidity during the preparation of the membranes on their morphologies were investigated by scanning electron microscope (SEM). With low temperature and high humidity, the polymer crystallization mechanism dominated the membrane formation process, and the casting solution formed membranes with symmetric morphologies in the vapor phase containing 0.79% DMAc. The effect of additives on the membrane structure and performance was also investigated. The results of adsorption experiments showed that the binding capacity of bovine serum albumin (BSA) increased with the appearance of a circular network morphology and the decrease of mean pore size of the membrane. With the addition of LiCl to the casting solution, the obtained membrane can adsorb BSA up to 150 μg/cm². Proteins on sodium dodecyl sulfate (SDS) polyacrylamide gel electrophoresis gels were successfully electro-blotted onto these PVDF membranes. Compared with commercial membranes, the PVDF membranes prepared in this work were more suitable for protein blotting.     

Crowding-Induced Crystallization of Poly(Ethylene Terephthalate)

Samples of poly(ethylene terephthalate) (PET) extracted from three-component systems with different ratios among PET, phenol, and poly(ethylene glycol) (PEG) were prepared. As a crowding agent, PEG can greatly increase PET crystallinity. The crystal and thermal behaviors were characterized by wide-angle x-ray scattering and differential scanning calorimetry. There were two endothermic maxima of the crowding-induced crystallization process as molecular weight and concentration of PEG increased. The theory of crowding can interpret the phenomena well.     

Membranes of Poly (Vinyl Butyral) (PVB) or Cationic PVB (CPVB) Blended with Poly (Vinylidene Fluoride) (PVDF) Prepared by a Nonsolvent Induced Phase Separation Method: Miscibility and Hydrophilicity

The synthesized hydrophilic polymers [poly (vinyl butyral) (PVB) and cationic PVB (CPVB)] blended with poly (vinylidene fluoride) (PVDF) were used to fabricate hydrophilic ultrafiltration membranes. A visual inspection method and a glass transition temperature method were applied to study the miscibility of PVDF/PVB and PVDF/CPVB blend systems. The results showed that the PVDF/PVB was an immiscible blend and the PVDF/CPVB was a partially miscible blend. Dynamic contact angle experiments showed that the hydrophilicity of the blend membranes was significantly improved with the addition of PVB and CPVB. The pure water permeation (PWP) of blend membranes increased with the content of PVB and CPVB.     

Investigation of Polyvinylidene Fluoride Membranes Prepared by Using Surfactant OP-10 Alone or with a Second Component,as Additives,via the Non-Solvent-Induced Phase Separation (NIPS) Process

Polyvinylidene fluoride (PVDF) flat-sheet membranes were prepared via a non-solvent-induced phase separation (NIPS) method at 60°C using a hydrophilic surfactant OP-10 (octylphenol polyoxyethylene ether) solely (Blank) or with a second additive [H₂O or lithium chloride (LiCl)] as pore-forming agents. The influence of OP-10 concentration on the surface tension, viscosity, and precipitation rate of PVDF/(H₂O, LiCl, or Blank) systems were investigated, and the ultrafiltration and mechanical properties of the resultant membranes were measured. It was found that an increased demixing rate during the coagulation process was the reason for the change in membrane morphology and properties. An obviously improved flux and slightly decreased mechanical properties and rejection were found in membranes prepared using a high concentration of OP-10 and the second component as additives. SEM pictures revealed an increased porous structure on the resultant membrane surface. A hypothesis was proposed to explain these phenomena; the reoriented surfactant molecules at the interface facilitated the water diffusion channels, which finally became the porous structure on the membrane surface. The weakened mechanical properties were due to the macrovoid structure in its membrane cross-section, which developed from the micelle structure in the casting solution. This hypothesis was further confirmed in a PVDF/OP-10/polyethylene glycol (PEG) system. A consistent conclusion was obtained.     

Comparison of Various Solvents for Poly(Phenylene Sulfide) Microporous Membrane Preparation via Thermally Induced Phase Separation

Six different solvents, i.e., diphenyl sulfone (DPS), diphenyl isophthalate (DPIP), benzoin (BZ), epsilon-caprolactam (CPL), hydrogenated terphenyl (HTP), and cyclohexyl pyrrolidinone (CHPN), were selected as diluents for poly(phenylene sulfide) (PPS) microporous membranes development via the thermally induced phase separation (TIPS) method. Phase separation behaviors for the various solvents were first identified through thermal analysis of their PPS solutions. Liquid-liquid separation behavior was identified for a group of solvents including DPS, DPIP, and BZ, whereas systems with the solvents CPL, HTP, and CHPN underwent solid-liquid separation during the cooling process. A newly designed casting device, which well simulated the industrial film casting process, was then used to produce films; it consisted of a side-by-side high-temperature plate and room-temperature plate. The different cooling conditions able to be produced by this casting device were found to greatly affect the TIPS process and the properties of the final membranes. The properties of PPS membranes prepared on this device from 30 wt.% binary solutions with the six solvents were investigated. The morphology of PPS membranes was also observed on the samples prepared under different cooling processes for the six solvents.     

Preparation of superhydrophobic membranes by electrospinning of fluorinated silane functionalized poly(vinylidene fluoride)

Fluorinated silane functionalized poly(vinylidene fluoride) (PVDF) is synthesized by graft polymerization of 3-trimethoxylpropyl methylacrylate with PVDF followed by coupling of fluorinated silanes. Flat membrane prepared using this functionalized PVDF has a water contact angle of 140°. Superhydrophobic PVDF membrane with a contact angle larger than 150° is prepared by the electrospinning of the fluorinated silane functionalized PVDF. The morphologies of the membranes are characterized using scanning electron microscopy. The surface composition of the membranes is analyzed using FTIR and the contact angles and water drops on the surface of the membrane are measured using video microscopy.     

Preparation and characterizations of PMMA-PVDF based polymer composite electrolyte materials for dye sensitized solar cell

Blend polymer composite gel electrolytesare prepared using thepoly vinyledene fluoride (PVDF), polymethyl methacrylate (PMMA) with alumina (Al₂O₃) in variance of alkali metal iodide saltsystem. The alumina doped blend polymer electrolytes characterized by the XRD diffraction and FT-IR spectra. This is supportive to the conformation of the crystallinity behaviour and the composite formation.The high-resolution scanning electron microscopy (HR-SEM) have used to find the composite electrolyte membrane porous size (10 μm) and it has support to understand the morphological structure of the membrane. To analyze the ionic conductivity of the potassium iodide based composite polymer electrolyte by the impedance measurements, which is 4.62 × 10⁻³ Scm⁻¹ at room temperature. Finally, different alkali metal iodide based dye-sensitized solar cells (DSSCs) fabricated and monitored an energy conversion efficiency.     

A novel PEO-based blends solid polymer electrolytes doping liquid crystalline ionomers

A novel PEO-based blends solid polymer electrolytes doping liquid crystalline ionomers (LCI), PEO/PMMA/LiClO₄/LCI, and PEO/LiClO₄/LCI were prepared by solution casting technology. Scanning electron microscope (SEM) and energy-dispersive spectroscopy (EDS) analysis proved that LCI uniformly dispersed into the solid electrolytes and restrained phase separation of PEO and PMMA. Differential scanning calorimetry (DSC) results showed that LCI decreases the crystallinity of blends solid polymer electrolytes. Thermogravimetric analysis (TGA) proved LCI not only improved thermal stability of PEO/PMMA/LiClO₄ blends but also prevent PEO/PMMA from phase separation. Infrared spectra results illustrated that there exists interaction among Li⁺ and O, and LCI that promotes the synergistic effects between PEO and PMMA. The EIS result revealed that the conductivity of the electrolytes increases with LiClO₄ concentration in PEO/PMMA blends, but it increases at first and reaches maximum value of 2.53?×?10^?4 S/cm at 1.0 % of LCI. The addition of 1.0 % LCI increases the conductivity of the electrolytes due to that LCl promoting compatibility and interaction of PEO and PMMA. Under the combined action of rigidity induced crystal unit, soft segment and the terminal ionic groups in LCI, PEO/PMMA interfacial interaction are improved, the reduction of crystallinity degree of PEO leads Li⁺ migration more freely.