Green Emitting Cerium Doped CaS Whiskers Grown by Solid State Diffusion Method

Undoped and cerium doped Calcium sulfide (CaS) phosphors were synthesized using solid state diffusion method. The X-ray diffraction pattern revealed that both undoped and doped CaS crystallites have cubic structure with average crystallite size varying from 20 to 30 nm. Scanning electron micrographs indicated that Ce doped CaS phosphors were composed of whiskers with different dimensions and orientations. The optical properties of undoped and Ce doped particles were characterized using Photoluminescence (PL) and UV-Vis absorption spectroscopy. The PL emission spectrum of cerium doped CaS phosphors for an excitation wavelength 465 nm showed a main peak at 500 nm and a shoulder peak at 556 nm due to 5d?→?4f transition in Ce³⁺ ions. The variation of PL intensity with cerium concentration was investigated and the maximum PL intensity was obtained for a doping concentration of 3 wt.%. The optical band gap of the samples was estimated from the diffuse reflectance spectrum and was found to increase with increase in cerium concentration. The enhanced optical properties of these phosphors can be exploited in various optoelectronic devices including displays and bioimaging techniques.     

Spectroscopic study of oscillator strength and radiative decay time of colloidal CdSe quantum dots

Characterization of samples of cadmium selenide quantum dots (CdSe) QDs dissolved in toluene colloidal solutions at a concentration of 1.4 mg/ml was carried out through UV–Vis absorption and photoluminescence (PL) spectroscopy. The size-dependent absorption and red-shifted PL emission peak wavelengths could be tuned between 510–576 and 545–606 nm respectively. Optical absorption spectral measurements yielded CdSe QDs having diameters about ~ 2.44–3.69 nm with energy gaps 2.32–2.08 eV which are higher than the bulk CdSe (1.74 eV) reminiscent of quantum confinement. This is found to be in good agreement with the semi-empirical pseudopotential model. In addition, the first excitonic absorption transition 1S_(e)1S_3/2(h) oscillator strength and the corresponding fluorescence radiative decay time of CdSe QDs are assessed using relevant Einstein relations for absorption and emission in a two-level system. The elaborated calculations would anticipate that the transition oscillator scale with the CdSe QD radius as ~ R^2.54. Correspondingly, the calculated radiative decay times decrease from 56.4 to 23.2 ns which scale with CdSe QDs radius as ~ R^?2.155 in fairly good agreement with experimental values reported in the literature.     

Synthesis, Fluorescence Properties and Theoretical Calculations of Novel Stilbene Derivatives Based on 1,3,4-Oxadiazole Bearing Anthracene Core

Two novel stilbene derivatives bearing anthracene core based on 1,3,4-oxadiazole were efficiently synthesized and characterized by ¹H-NMR, mass spectrometry and elemental analysis. The optical properties of the title compounds were investigated by UV–vis absorption and fluorescence emission spectra in different solvents. Chemical calculations were performed by density functional theory (DFT) at the (B3LYP)/6-31G* level. The results show the two compounds exhibit strong green fluorescence emission ranged from 489–493 nm, and the fluorescence quantum yield ranged from 0.78–0.92. Their HOMO and LUMO levels are (?5.44 eV, ?2.25 eV) and (?5.45 eV, ?2.28 eV), respectively. The influence of the solvent on the fluorescence intensities was also discussed.     

Effect on photophysical properties of colloidal ZnS quantum dots by doping with cobalt, copper, and cobalt�Ccopper mixtures

Colloidal ZnS quantum dots (QDs) are prepared by passing H₂S gas through a solution of Zn(CH₃COO)₂ in acetonitrile. Photophysical properties are investigated using UV?CVisible and photoluminescence (PL) spectroscopy. The spectrum shows an absorption shoulder at 271 nm representing a band gap of 4.6 eV. The doping of ZnS QDs with Co, Cu, and a mixture of Co and Cu not only increased the band gap to 0.2 eV but also turns these otherwise colorless QDs to blue in color due to cobalt, and green due to Cu. The observed emission in the visible region suggests that the dopants may have induced additional excited states to the ZnS QDs. This absorbance in the visible region can be utilized in the optoelectronic applications.     

The optical properties and energy transition process in nanocomposite of polyvinyl-pyrrolidone polymer and Mn-doped ZnS

This study has been carried out on the optical properties of polyvinyl-pyrrolidone (PVP), the energy transition process in nanocomposite of PVP capped ZnS:Mn nanocrystalline and the influence of the PVP concentration on the optical properties of the PVP capped ZnS:Mn nanocrystalline thin films synthesized by the wet chemical method. The microstructures of the samples were investigated by X-ray diffraction, the atomic absorption spectroscopy, and transmission electron microscopy. The results showed that the prepared samples belonged to the sphalerite structure with the average particle size of about 2–3 nm. The optical properties of samples are studied by measuring absorption, photoluminescence (PL) spectra and time-resolved PL spectra in the wavelength range from 200 to 700 nm at 300 K. From data of the absorption spectra, the absorption edge of PVP polymer was found about of 230 nm. The absorption edge of PVP capped ZnS:Mn nanoparticles shifted from 322 to 305 nm when the PVP concentration increases. The luminescence spectra of PVP showed a blue emission with peak maximum at 394 nm. The luminescence spectra of ZnS:Mn–PVP exhibits a blue emission with peak maximum at 437 nm and an orange–yellow emission of ion Mn²⁺ with peak maximum at 600 nm. While the PVP coating did not affect the microstructure of ZnS:Mn nanomaterial, the PL spectra of the PVP capped ZnS:Mn samples were found to be affected strongly by the PVP concentration.     

Structure and optical properties of Cd-substituted ZnO (Zn1−x Cd x O) thin films synthesized by the dc reactive magnetron sputtering

The ternary Zn_1?x Cd _x O (x = 0, 0.2) thin films with wurtzite structure and highly (002)-preferred orientations were deposited on glass substrates by the direct current (dc) reactive magnetron sputtering method. The X-ray diffraction, X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), optical absorption spectra and photoluminescence (PL) were employed to investigate the structural and the optical properties in detail. The results indicated that as x varied from x = 0–0.2, the diffraction angle of the (002) peaks decreased from ~34.36° to ~33.38° and the lattice spacing increased from 0.260 to 0.268 nm. Moreover, the optical band-gap of the Zn_1?x Cd _x O thin films with the wurtzite structure decreased from 3.20 eV at x = 0–2.70 eV at x = 0.2. Correspondingly, the near-band-edge PL was tuned in a wide visible region from ~393 to 467 nm. The chemical bonding states of Cd in Zn_1?x Cd _x O alloy thin films were examined by XPS analysis.     

Studies of Luminescence Performance on Carbazole Donor and Quinoline Acceptor Based Conjugated Polymer

We report on the synthesis of conjugated polymer (CV-QP) containing carbazole (donor) and quinoline (acceptor) using Wittig methodology. The structural, optical and thermal properties of the polymer were investigated by FT-IR, NMR, GPC, UV, PL, cyclic voltammetry, atomic force microscopy (AFM) and thermogravimetric analysis (TGA). The polymer exhibits thermal stability upto 200 °C and shows good solubility in common organic solvents. The polymer has optical absorption band in a thin film at 360 nm and emission band formed at 473 nm. The optical energy band gap was found to be 2.69 eV as calculated from the onset absorption edge. Fluorescence quenching of the polymer CV-QP was found by using DMA (electron donor) and DMTP (electron acceptor). AFM image indicated that triangular shaped particles were observed and the particle size was found as 1.1 μm. The electrochemical studies of CV-QP reveal that, the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels of the CV-QP are 6.35 and 3.70 eV, which indicated that the polymers are expected to provide charge transporting properties for the development of polymer light-emitting diodes (PLEDs).     

Strong visible photoluminescence of TEEDPS-modified silica MCM-41 materials

The photoluminescence (PL) of mesoporous silica MCM-41 modified with triethoxy-3-ethylenediaminepropyl-silane (TEEDPS) has been investigated using UV-Vis fluorescence and absorption spectroscopy methods and thermogravimetry. Results suggest that the TEEDPS-modified MCM-41 has a greatly enhanced (by 20 times) PL intensity at 420 nm relative to that of TEEDPS, and this enhanced PL still remains even after post heat treatment at 180 °C under vacuum (yielding a sample MTV). Meanwhile, a strong PL band at 450 nm appeared in the sample MTV when excited at 380 nm. The TEEDPS-modified material could be partly oxidized at 180 °C in air (yielding a sample MTA); therefore obvious absorption was found up to about 600 nm. The interaction between this absorption and the vacancy-related emission resulted in the maximum of the emission bands of the sample MTA at around 515 nm when excited at 440 nm. PACS 78.55.Mb; 78.55.Hx; 79.60.Jv; 78.40.Ha     

Effects of natural oxidation on the photoluminescence properties of Si nanocrystals prepared by pulsed laser ablation

In this work, Si nanocrystals (Si-NCs) have been prepared by pulsed laser ablation technique in dichloromethane, and the microstructure and photoluminescence (PL) properties of the Si-NCs before and after natural oxidation were investigated. Transmission electron microscopy and Raman results show that the average diameter of the Si-NCs is 2.42 nm in the dichloromethane solution. Blue–violet PL with a lifetime of 4.6 ns is observed at room temperature, and the PL peak shifts toward longer wavelength with the red shift of excitation wavelength. The PL excitation spectrum indicates that the bandgap of the Si-NCs in solution is 2.64 eV, which confirms that the blue–violet PL originates from interband transition of Si-NCs caused by quantum confinement effect. The PL peak red shifts to 607 nm after natural oxidation, and the peak lifetime of which is slow down to 13.1 μs. The fixed PL peak excited by different wavelengths and the slow PL decay time indicate that interface defects become the main PL mechanism after natural oxidation. The results will add new information for understanding the PL mechanism of Si-NCs in different environments.     

Optical excitation and emission processes of Si-QD/SiO2 multilayer films with different SiO2 layer thicknesses

Si-rich oxide/SiO₂ multilayer films with different SiO₂ layer thicknesses have been deposited by the plasma enhanced chemical vapor deposition technique, and crystallized Si quantum dot (Si-QD)/SiO₂ multilayer films are obtained after annealing at 1100 ^°C. The photoluminescence (PL) intensity of the multilayer films increases significantly with increasing SiO₂ layer thickness, and the PL peak shifts from 1.25 eV to 1.34 eV. The PL excitation spectra indicate that the maximal PL excitation intensity is located at 4.1 eV, and an excitation–transfer mechanism exists in the excitation processes. The PL decay time for a certain wavelength is a constant when the SiO₂ thickness is larger than 2 nm, and a slow PL decay process is obtained when the SiO₂ layer is 1 nm. In addition, the PL peak shifts toward high energy with decreasing temperature only when the SiO₂ layer is thick enough. Detailed analyses show that the mechanism of PL changes from the quantum confinement effect to interface defects with decreasing SiO₂ layer thickness.     

Photoluminescence and optical characterization of CdS nanoparticles prepared by solid-state method at low temperature

The photoluminescence (PL) and optical properties of CdS nanoparticles prepared by the solid-state method at low temperature have been discussed. The effects of NaCl and anionic surfactant SDBS (sodium dodecylbenzene sulfonate) on the luminescent properties of CdS nanophosphors prepared using this method, without the inert gas or the H₂S environment, were studied separately. The synthesized products were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscope (FESEM), and energy dispersive X-ray spectroscopy (EDAX). UV–VIS absorption and PL spectra were also studied. XRD studies confirmed the single-phase formation of CdS nanoparticles. TEM micrograph revealed the formation of nearly spherical nanoparticles with a diameter of 2.5 nm. The PL emission for the CdS shows the main peak at 560 nm with a shoulder at 624 nm, with an increase in the PL intensity after the addition of SDBS. The effect of Mn doping on PL intensity has also been investigated. The PL spectra show that the emission intensity decreases as the dopant concentration increases.     

RbVO_3的光谱分析及能带结构研究

采用杂化前驱体的湿化学合成法制备了偏钒酸铷(RbVO3)发光材料。利用粉末X射线衍射(XRD)、红外光谱仪(IR)等对RbVO3的结构进行了表征,利用紫外-可见(UV-Vis)吸收光谱、光致发光光谱等研究了该发光材料的光致发光性能,并采用基于密度泛函理论的CASTEP程序计算了RbVO3的能带。结果表明,在357 nm紫外光的激发下,RbVO3产生发光峰在525 nm附近、色坐标为(0.318 0,0.430 9)的绿白光发射,发光亮度高;RbVO3计算的光学带隙为2.67 eV,与实验值较为吻合。     

Synthesis and optical properties of nanocrystalline ZnO powders prepared by a direct thermal decomposition route

This paper reports the synthesis and optical properties of nanocrystalline ZnO powders with crystallite sizes of 32.5 (±1.4)–43.4 (±0.4) nm prepared by a direct thermal decomposition of zinc acetate at the temperatures of 400, 500, 600, and 700°C for 4 h. The structure of the prepared samples was studied by XRD and FTIR spectroscopy, confirming the formation of wurtzite structure. The morphology of the samples revealed by SEM was affected by the thermal decomposition temperature, causing the formations of both nanoparticles and nanorods with different size and shape in the samples. The synthesized powders exhibited the UV absorption below 400 nm (3.10 eV) with a well defined absorption peak at around 285 nm (4.35 eV). The estimated direct bandgaps were obtained to be 3.19, 3.16, 3.14, and 3.13 eV for the ZnO samples thermally decomposed at 400, 500, 600, and 700°C, respectively. All the samples exhibited room-temperature photoluminescence (PL) showing a strong UV emission band at ∼395 nm (3.14 eV), a weak blue band at ∼420 nm (2.95 eV), a blue–green band at ∼485 nm (2.56 eV), and a very weak green band at ∼529 nm (2.35 eV). The mechanisms responsible for photoluminescence of the samples are discussed.     

Luminescence studies and effect of etching on cerium-doped CaS nanoparticles

Cerium-doped calcium sulphide nanoparticles were synthesized using the solid state diffusion method. The formed nanoparticles were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), UV-visible absorption spectroscopy and photoluminescence (PL) spectroscopy. The XRD pattern confirmed a cubic CaS phase with an average grain size of 53 nm of the formed samples. The TEM image showed non-agglomerated particles with an average size of 60 nm, which is in close agreement with the XRD result. The PL-emission spectrum showed peaks at 506 and 565 nm due to the transition from the excited state to the ground state of Ce³⁺. The effect of etching has been studied on the luminescent properties of CaS:Ce phosphors. With an increase in the etching time there is decrease in the size of the particles, as a result of which the PL spectrum showed a slight blue shift. The UV-visible absorption spectrum also showed a blue shift with an increase in etching time, which is in agreement with the nanosize effect.     

纳米NiO的制备及其谱学特性研究

以醋酸镍、氢氧化钠为原料,吐温80为分散剂,通过固相反应制备了纳米级NiO。 用X射线衍射仪、透射电子显微镜、傅里叶红外光谱、紫外-可见分光光度等方法对材料的粒径、晶格畸变率、形貌以及红外、紫外-可见光的吸收性能进行了表征。结果表明：制得的纳米NiO产物为球形、属立方晶系,粒径大小在9～30 nm左右;晶格畸变率随粒径的增大而减小;纳米NiO红外吸收峰出现在437 cm-1处,与普通粒径的NiO光谱纯(484 cm-1)相比,其吸收峰红移了47 cm-1,体现了纳米NiO的表面效应;不同粒径大小的NiO对紫外-可见光的吸收特性不同。普通粒径的NiO光谱纯在紫外-可见光区域没有吸收,颗粒尺寸越小吸收波长越短,10 nm NiO的紫外-可见光吸收峰位于309 nm处,直接跃迁的光学能带隙约为4.2 eV,比体相材料(3.65 eV)增加0.55 eV,表现出明显的量子尺寸效应。对纳米NiO的谱学特性研究表明该材料在光电领域具有潜在的应用价值。     

Ligand exchange synthesis of organometallic Rh nanoparticles and application in explosive sensing

Alkyne {phenyl acetylene (PA) and 9-ethynylphenanthrene (EPT)}-ligated Rh nanoparticles (1 and 2, respectively) with mean diameter of 1.5 ± 0.2 nm were synthesized via a facile and high-yield biphasic ligand exchange protocol using similar sized ethylene glycol (EG)-stabilized Rh nanoparticles as precursors (EG:Rh). The synthesized organometallic Rh nanoparticles were convincingly characterized using several spectroscopic and microscopic techniques, e.g., Fourier transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance (¹H NMR), optical absorption spectroscopy (UV-Vis), photoluminescence spectroscopy (PL), powder X-ray diffraction (PXRD), X-ray photoelectron spectroscopy (XPS), and transmission electron microscope (TEM). We propose that the syntheses mechanism relies on catalytic acetylenic (≡C–H, carbon–hydrogen) bond breaking by EG:Rh followed by strong metal–carbon bond formation with a vinyldiene (>C═C═M) motif. The obtained 1 and 2 showed luminescence property, which arises from ligand structure through intraparticle conjugation. Electron-rich phenanthrene-ligated Rh nanoparticles (2) showed good sensing performance for detection of electron deficient nitro-aromatic explosive molecules (NA) in solution phase through luminescence quenching method.     

Polycrystalline GaSb films prepared by the coevaporation technique

Gallium antimonide (GaSb) films were deposited onto fused silica and n-Si (100) substrates by coevaporating Ga and Sb from appropriate evaporation sources. The films were polycrystalline in nature. The size and the shape of the grains varied with the change in the substrate temperature during deposition. The average surface roughness of the films was estimated to be 10 nm. Grain boundary trap states varied between 2×10¹² and 2.2×10¹² cm^?2 while barrier height at the grain boundaries varied between 0.09 eV and 0.10 eV for films deposited at higher temperatures. Stress in the films decreased for films deposited at higher temperatures. XPS studies indicated two strong peaks located at ～543 eV and ～1121 eV for Sb 3d_3/2 and Ga 2p_3/2 core-level spectra, respectively. The PL spectra measured at 300 K was dominated by a strong peak located ～0.55 eV followed by two low intensity peaks ～0.63 eV and 0.67 eV. A typical n-Si/GaSb photovoltaic cell fabricated here indicated V _oc～311 mV and J～29.45 mA/cm², the density of donors (N _d)～3.87×10¹⁵ cm^?3, built in potential (V _bi)～0.48 V and carrier life time (τ)～28.5 ms. Impedance spectroscopy measurements indicated a dielectric relaxation time ～100 μs.     

新型氟代三苯胺衍生物的合成和光谱特性研究

设计和合成了一种新型氟代三苯胺衍生物——N,N,N′,N′-四苯基-[2′,2″,3′,3″,5′,5″,6′,6″-八氟对四联苯]-4,4″′-二胺(OFTPA)。通过元素分析、熔点测定、红外光谱和1 H NMR谱等手段对OFTPA的分子结构进行了表征,并对其主要的红外光谱吸收峰和1 H NMR谱带进行了归属分析。利用紫外-可见吸收光谱、荧光光谱和循环伏安法(CV)对OFTPA的电子能级结构和发光性能进行了研究。紫外-可见吸收光谱测定结果表明,OFTPA薄膜的最大吸收峰波长为355nm,光学带隙(Eg)为3.09eV。荧光光谱测定结果表明,OFTPA薄膜在365nm紫外光的激发下,产生发光峰波长在448nm附近、半峰宽(FWHM)为68nm的蓝光发射,色纯度高,有望成为优良的蓝光发射材料。循环伏安法测定结果表明,OFTPA的最高占有轨道(HOMO)能级为-5.41eV,最低空轨道(LUMO)能级为-2.32eV,具有良好的空穴传输性能。研究结果为进一步研究其在有机光电器件中的应用提供了参考。     

Highly Luminescent Material Based on Alq3:Ag Nanoparticles

Tris (8-hydroxyquinoline) aluminum (Alq₃) is an organic semiconductor molecule, widely used as an electron transport layer, light emitting layer in organic light-emitting diodes and a host for fluorescent and phosphorescent dyes. In this work thin films of pure and silver (Ag), cupper (Cu), terbium (Tb) doped Alq₃ nanoparticles were synthesized using the physical vapor condensation method. They were fabricated on glass substrates and characterized by X-ray diffraction, scanning electron microscope (SEM), energy dispersive spectroscopy, atomic force microscope (AFM), UV-visible absorption spectra and studied for their photoluminescence (PL) properties. SEM and AFM results show spherical nanoparticles with size around 70–80 nm. These nanoparticles have almost equal sizes and a homogeneous size distribution. The maximum absorption of Alq₃ nanoparticles is observed at 300 nm, while the surface plasmon resonant band of Ag doped sample appears at 450 nm. The PL emission spectra of Tb, Cu and Ag doped Alq₃ nanoparticles show a single broad band at around 515 nm, which is similar to that of the pure one, but with enhanced PL intensity. The sample doped with Ag at a concentration ratio of Alq₃:Ag?=?1:0.8 is found to have the highest PL intensity, which is around 2 times stronger than that of the pure one. This enhancement could be attributed to the surface plasmon resonance of Ag ions that might have increased the absorption and then the quantum yield. These remarkable result suggest that Alq₃ nanoparticles incorporated with Ag ions might be quite useful for future nano-optoelectronic devices.     

溶剂热法合成橙-绿双波段荧光碳点

荧光碳点具有激发波长依赖的独特性质,有望基于此制备检测溶液pH值的荧光探针。以柠檬酸和尿素为原料、N,N-二甲基甲酰胺为溶剂,采用一步溶剂热法在200℃下保温12 h制备了一种新型的具有橙-绿双波段荧光发射性能的水溶性碳点。采用透射电子显微镜、X射线衍射、拉曼光谱、傅里叶变换红外光谱和X射线光电子能谱等方法对荧光碳点的组成和形貌进行了表征,还通过荧光发射光谱和紫外-可见吸收光谱对其光学性能进行了研究。结果表明,制备的碳点粒径为2.7~4.3 nm,表面带有大量含氧官能团,具有良好的水分散性。在440 nm和540 nm波长光激发下分别呈现绿色(500 nm)和橙色(590 nm)双波段荧光发射。合成的荧光碳点发光性能对pH值具有敏感性:在强碱性溶液中,590 nm的荧光强度比水溶液中提高了6.71倍,同时吸收峰的蓝移使得自然光下其溶液颜色发生了明显改变,具有强碱性指示剂的作用;在pH值为2~6的酸性溶液中,500 nm与590 nm发光峰强度比与pH值之间呈现良好的线性关系,展现了作为pH值比率荧光探针的应用潜力。