Chemoselectivity of the Reactions of Diazomethanes with 5‐Benzylidene‐3‐phenylrhodanine

The reactions of 5‐benzylidene‐3‐phenylrhodanine ( 2 ; rhodanine=2‐thioxo‐1,3‐thiazolidin‐4‐one) with diazomethane ( 7a ) and phenyldiazomethane ( 7b ) occurred chemoselectively at the exocyclic C?C bond to give the spirocyclopropane derivatives 9 and, in the case of 7a , also the C‐methylated products 8 (Scheme 1). In contrast, diphenyldiazomethane ( 7c ) reacted exclusively with the C?S group leading to the 2‐(diphenylmethylidene)‐1,3‐thiazolidine 11 via [2+3] cycloaddition and a ‘two‐fold extrusion reaction’. Treatment of 8 or 9b with an excess of 7a in refluxing CH₂Cl₂ and in THF at room temperature in the presence of [Rh₂(OAc)₄], respectively, led to the 1,3‐thiazolidine‐2,4‐diones 15 and 20 , respectively, i.e., the products of the hydrolysis of the intermediate thiocarbonyl ylide. On the other hand, the reactions with 7b and 7c in boiling toluene yielded the corresponding 2‐methylidene derivatives 16, 21a , and 21b . Finally, the reaction of 11 with 7a occurred exclusively at the electron‐poor C?C bond, which is conjugated with the C?O group. In addition to the spirocyclopropane 23 , the C‐methylated 22 was formed as a minor product. The structures of the products (Z)‐ 8, 9a, 9b, 11 , and 23 were established by X‐ray crystallography.     

Incorporation of an Allene Unit into α‐Pinene via β‐Elimination

The two double‐bond isomers 3‐iodo‐2,6,6‐trimethylbicyclo[3.1.1]hept‐2‐ene ( 6b ) and 3‐iodo‐4,6,6‐trimethylbicyclo[3.1.1]hept‐2‐ene ( 11 ) were synthesized by reacting 2,6,6‐trimethylbicyclo[3.1.1]heptan‐3‐one ( 9 ) with hydrazine, followed by treatment with I₂ in the presence of Et₃N. Treatment of 11 with t‐BuOK as base in diglyme at 220° resulted in the formation of 9 and 6,6‐dimethyl‐4‐methylidenebicyclo[3.1.1]hept‐2‐ene ( 12 ). For the formation of 9 , the cyclic allene 7 is proposed as an intermediate. Treatment of the second isomer, 6b , with t‐BuOK at 170° gave rise to the diene 12 and the dimerization product 17 . The underlying mechanism of this transformation is discussed. On the basis of density‐functional‐theory (DFT) calculations on the allene 7 and the alkyne 15 , the formation of the latter as the intermediate was excluded.     

Unusual Reactions of (+)‐Car‐2‐ene and (+)‐Car‐3‐ene with Aldehydes on K10 Clay

The reactions of (+)‐car‐2‐ene ( 1 ) and (+)‐car‐3‐ene ( 2 ) with aldehydes in the presence of montmorillonite clay were studied for the first time (Schemes 3 and 5). The major products of these reactions are optically active, substituted hexahydroisobenzofurans, probably formed as a result of an attack of the protonated aldehyde at the cyclopropane ring. Quite unexpectedly, the products are cis‐configured at the ring‐fusion site; the fact was established by means of quantum‐chemical calculations and NMR data. It appeared that the behavior of the 2 : 3 mixture 1 / 2 in reactions with aldehydes in the presence of K10 clay differed substantially from the reactivities of the corresponding individual monoterpenes.     

The Propensity of α‐Aminoisobutyric Acid (=2‐Methylalanine; Aib) to Induce Helical Secondary Structure in an α‐Heptapeptide: A Computational Study

We present a molecular‐dynamics simulation study of an α‐heptapeptide containing an α‐aminoisobutyric acid (=2‐methylalanine; Aib) residue, Val¹‐Ala²‐Leu³‐Aib⁴‐Ile⁵‐Met⁶‐Phe⁷, and a quantum‐mechanical (QM) study of simplified models to investigate the propensity of the Aib residue to induce 3₁₀/α‐helical conformation. For comparison, we have also performed simulations of three analogues of the peptide with the Aib residue being replaced by L ‐Ala, D ‐Ala, and Gly, respectively, which provide information on the subtitution effect at C(α) (two Me groups for Aib, one for L ‐Ala and D ‐Ala, and zero for Gly). Our simulations suggest that, in MeOH, the heptapeptide hardly folds into canonical helical conformations, but appears to populate multiple conformations, i.e., C₇ and 3₁₀‐helical ones, which is in agreement with results from the QM calculations and NMR experiments. The populations of these conformations depend on the polarity of the solvent. Our study confirms that a short peptide, though with the presence of an Aib residue in the middle of the chain, does not have to fold to an α‐helical secondary structure. To generate a helical conformation for a linear peptide, several Aib residues should be present in the peptide, either sequentially or alternatively, to enhance the propensity of Aib‐containing peptides towards the helical conformation. A correction of a few of the published NMR data is reported.     

Tris‐cyclometalated Iridium(III) Complexes with Three Different Ligands: a New Example with 2‐(2,4‐Difluorophenyl)pyridine‐Based Complex

An iridium(III) complex comprising three different cyclometalated phenylpyridine‐based ligands was designed and synthesized. Interestingly, mixed‐ligand complexes could be obtained by using a simple and straightforward procedure. A tris(heteroleptic) Ir^III complex was obtained as a mixture of stereoisomers that could not be separated. Photophysical properties of the tris(heteroleptic) complex was investigated by UV/VIS absorption and luminescence spectroscopy, and compared with those of the parent homoleptic complexes. Modelling by time‐dependent density functional theory (TD‐DFT) was also performed to elucidate the nature and the location of the excited state, and to support the experimental results.     

Intermolecular Reactions of γ‐Halocarbanions – Stepwise Analogs of 1,3‐Dipolar Cycloaddition

γ‐Halocarbanions, short‐lived intermediates, add to electron‐deficient double bonds of aldehydes, Michael acceptors, and imines to form anionic adducts that enter intramolecular 1,5‐substitution to form five‐membered rings of tetrahydrofurans, cyclopentanes, and pyrrolidines, respectively. Although the γ‐halocarbanions can be generated by simple deprotonation of appropriate precursors, a wealth of other methods based on Lewis acid‐catalyzed opening of cyclopropanes with formation of dipolar species utilizes a similar mechanistic scheme. In our review, we analyze kinetic relations of elementary processes in the multistep transformations, and demonstrate how structural factors influence the mechanisms and selectivity of the reaction.     

New Aspects of 1,3‐Diphosphacyclobutane‐2,4‐diyls

1,3‐Di(tert‐butyl)‐2,4‐bis[2,4,6‐tri(tert‐butyl)phenyl]‐1,3‐diphosphacyclobutane‐2,4‐diyl was formed from [2,4,6‐tri(tert‐butyl)phenyl]phosphaacetylene and t‐BuLi. In addition, the X‐ray diffraction analysis was carried out, together with theoretical calculations of the structure and NMR data.     

A Computational Study of Reaction Routes of 1,3,3‐trinitroazetidine (TNAZ) Synthesis

This study performs simulation modeling of the synthesis of 1,3,3‐trinitro azetidine (TNAZ), a high‐energy compound. Based on the experimental nitromethane and 1,3‐dihalo‐2‐propanol raw material methods in the latest literature, we suggest reasonable reaction mechanisms. Using quantum mechanical theory, i.e., electronic density functional theory (DFT) B3LYP/6‐31G(d,p) in the Gaussian 09 program, we have completed optimization work for all species in related reaction stages and obtained energy barrier data, which are used to identify the most feasible reaction pathways. Nitromethane has been used to react with formaldehyde through an ionic‐type transition to produce 2,2‐dinitro‐1,3‐propandiol, followed by reaction with hydrogen bromide to produce 1,3‐dibromo‐2,2‐dinitro propane, then further react with a tertiary amine to produce 1‐tertiary amino‐3,3‐dinitro azetidine, and subsequently nitrate to obtain TNAZ. Substituent effects of some atomic groups have been found during synthesis modeling, and a total activation energy of 1386.6 kJ/mol needs to be conquered in order to complete the reaction. Furthermore, from synthesis modeling using the 1,3‐dihalo‐2‐propanol raw material method, the suggested reaction routes could be bromination of glycerol to 1,3‐dibromo‐2‐propanol, followed by reaction with nitromethane to undergo amination, and further cyclization, oxidation, oximization, and nitration in sequence to produce the target product TNAZ. An overall 1163.5 kJ/mol energy barrier needs to be overcome in this part of the computation.     

Reactions of 2‐Unsubstituted 1H‐Imidazole 3‐Oxides with 2,2‐Bis(trifluoromethyl)ethene‐1,1‐dicarbonitrile: A Stepwise 1,3‐Dipolar Cycloaddition

The reaction of 1,4,5‐trisubstituted 1H‐imidazole‐3‐oxides 1 with 2,2‐bis(trifluoromethyl)ethene‐1,1‐dicarbonitrile ( 7 , BTF) yielded the corresponding 1,3‐dihydro‐2H‐imidazol‐2‐ones 10 and 2‐(1,3‐dihydro‐2H‐imidazol‐2‐ylidene)malononitriles 11 , respectively, depending on the solvent used. In one example, a 1 : 1 complex, 12 , of the 1H‐imidazole 3‐oxide and hexafluoroacetone hydrate was isolated as a second product. The formation of the products is explained by a stepwise 1,3‐dipolar cycloaddition and subsequent fragmentation. The structures of 11d and 12 were established by X‐ray crystallography.     

The Rearrangement of 2,2‐Diphenyl‐1‐[(E)‐2‐phenylethenyl]cyclopropane to 3,4,4‐Triphenylcyclopent‐1‐ene: a DFT Analysis

A computational study on the rearrangement of 2,2‐diphenyl‐1‐[(E)‐2‐phenylethenyl]cyclopropane ( 1 ) is presented, using density functional theory (DFT), (U)B3LYP with the 6‐31G* basis set (DFT1) and (U)M05‐2X with the 6‐311+G** basis set (DFT2). In agreement with a biradical character of the transition structure (TS) or intermediate, the potential‐energy hypersurface is lowered by the influence of three conjugated Ph groups. Surprisingly, two conformations of the geminal diphenyl group (different twist angles) induce two different minimum‐energy pathways for the rearrangement. Independent of the functional used, the first hypersurface harbors true biradical intermediates, whereas the second energy surface is a flat, slightly ascending slope from the starting material to the TS. The functional (U)M05‐2X with the basis set 6‐311+G** provides realistic energies which seem to be close to experiment. The activation energy for racemization of enantiomers of 1 is lower than that of rearrangement by 2.5 kcal mol^?1, in agreement with experiment.     

Formation and Unimolecular Dehydrogenation of Gaseous Alkaline‐earth Metal Amidoboranes M(NH2BH3)2 (M = Be – Ba): Comparative Computational Study

Formation of alkaline‐earth metal amidoboranes M(NH₂BH₃)₂ (M = Be, Mg, Ca, Sr, Ba) and unimolecular dehydrogenation reactions were computationally studied at the B3LYP/def2‐TZVPPD level of theory. Formation of M(NH₂BH₃)₂ from ammonia borane and MH₂ is exergonic, but subsequent unimolecular dehydrogenation reactions are endergonic at room temperature. In contrast to alkali metal amidoboranes, for M(NH₂BH₃)₂ the nature of M significantly affects their reactivity. Activation energies for the dehydrogenation of first and second hydrogen molecules decrease from Be to Ba. In case of Be compounds, intramolecular M ··· H–B contacts play an important role, whereas for heavier analogs such contacts are much less pronounced.     

Theoretical Studies on Reaction Mechanisms of HNCS with NH (X3∑)

The reaction mechanisms of HNCS with NH(X3∑) were theoretically investigated. The minimum energy paths (MEP) of the reaction were calculated by using the density functional theory(DFT) at the B3LYP/6-311 G** level. The equilibrium structural parameters, the harmonic vibrational frequencies, the total energies, and the zeropoint energies(ZPE) of all the species were calculated. The single-point energies along the MEP were further refined at the QCISD(T)/6-311 G** level. It was found that the mechanisms of the HNCS NH(X3∑) reaction involve two channels producing the HNC HNS and the N2H2 CS products. Channel 1 plays a dominant role and the HNC HNS are the main products. The reaction is exothermic.     

Chemoselectivity in the Reaction of 2‐Diazo‐3‐oxo‐3‐phenylpropanal with Aldehydes and Ketones

The chemoselectivity in the reaction of 2‐diazo‐3‐oxo‐3‐phenylpropanal ( 1 ) with aldehydes and ketones in the presence of Et₃N was investigated. The results indicate that 1 reacts with aromatic aldehydes with weak electron‐donating substituents and cyclic ketones under formation of 6‐phenyl‐4H‐1,3‐dioxin‐4‐one derivatives. However, it reacts with aromatic aldehydes with electron‐withdrawing substituents to yield 1,3‐diaryl‐3‐hydroxypropan‐1‐ones, accompanied by chalcone derivatives in some cases. It did not react with linear ketones, aliphatic aldehydes, and aromatic aldehydes with strong electron‐donating substituents. A mechanism for the formation of 1,3‐diaryl‐3‐hydroxypropan‐1‐ones and chalcone derivatives is proposed. We also tried to react 1 with other unsaturated compounds, including various olefins and nitriles, and cumulated unsaturated compounds, such as N,N′‐dialkylcarbodiimines, phenyl isocyanate, isothiocyanate, and CS₂. Only with N,N′‐dialkylcarbodiimines, the expected cycloaddition took place.     

The First Stereoselective Total Synthesis of Naturally Occurring,Bioactive (3R,5R)‐1‐(4‐Hydroxyphenyl)‐7‐phenylheptane‐3,5‐diol and the Synthesis of Its Enantiomer

The first stereoselective total synthesis of the naturally occurring anti‐emetic diarylheptanoid (3R,5R)‐1‐(4‐hydroxyphenyl)‐7‐phenylheptane‐3,5‐diol ( 1 ) was accomplished starting from 4‐hydroxybenzaldehyde and involving a Sharpless kinetic resolution and an asymmetric epoxidation as the key steps (Scheme 2). The enantiomer 1a of this compound was also simultaneously prepared.     

5‐Morpholino‐1,2,3,4‐thiatriazole as a Sulfur‐Transfer Reagent in the Reactions with Thioketones

The thermal decomposition of 5‐morpholino‐1,2,3,4‐thiatriazole ( 7 ), which leads to the extrusion of an active form of sulfur, in the presence of different thioketones is described. The interception of the S‐atom by the C?S bond leads to in situ formation of an elusive thiocarbonyl S‐sulfide of type 5 . This intermediate is a prone 1,3‐dipole, which undergoes effectively [2+3] cycloadditions with thioketones to yield 1,2,4‐trithiolane derivatives in a regioselective manner. Unexpectedly, 3,3‐dichloro‐2,2,4,4‐tetramethyl‐3‐thioxocyclobutanone ( 1c ) does not lead to the expected symmetrical 1,2,4‐trithiolane. This result can be explained by the reduced stability of the corresponding thiosulfine 5c . Three‐component reactions, which were carried out in the presence of equimolar amounts of two different thioketones, result in the formation of ‘mixed’ 1,2,4‐trithiolanes of type 8 .     

Solid‐State and Solution Structural Studies of 4‐{[C(E)]‐1H‐Azol‐1‐ylimino)methyl}pyridin‐3‐ols

The new N‐salicylideneheteroarenamines 1 – 4 were prepared by reacting the biologically relevant 3‐hydroxy‐4‐pyridinecarboxaldehyde ( 5 ) with 1H‐imidazol‐1‐amine ( 6 ), 1H‐pyrazol‐1‐amine ( 7 ), 1H‐1,2,4‐triazol‐1‐amine ( 8 ), and 1H‐1,3,4‐triazol‐1‐amine ( 9 ). Solution ¹H‐, ¹³C‐, and ¹⁵N‐NMR were used to establish that the hydroxyimino form A is the predominant tautomer. A combination of ¹³C‐ and ¹⁵N‐CPMAS‐NMR with X‐ray crystallographic studies confirms that the same form is present in the solid state. The stabilities and H‐bond geometries of the different forms, tautomers and rotamers, are discussed by using B3LYP/6‐31G** calculations.