Influence of ammonia on the morphologies and enhanced photocatalytic activity of TiO2 micro/nanospheres

TiO₂ micro/nanospheres were synthesized by a combination process contains hydrolysis of titanium tetra-n-butyl in mixed solution of anhydrous ethanol/ammonia and the subsequent calcination under 550 °C for 7 h. The pH values of the mixed solution were tuned to be 10.4, 11.0 and 11.6, respectively, by adding different amounts of ammonia. Scanning electron microscope (SEM) and transmission electron microscope (TEM) were used to characterize the morphologies and the crystallinity. X-ray diffraction (XRD) patterns indicated that pH value of the precursors has an important effect on the crystal phase composition. UV-vis diffuse reflectance spectrum was applied to characterize the optical properties of samples. Degradation of methylene blue under the irradiation of 300 W Hg lamp confirmed the enhanced photocatalytic activity of TiO₂ micro/nanospheres. In addition, the formation mechanism was proposed.     

Fabrication and application of highly ordered mesoporous Co3O4, NiO, and their metals

Highly ordered mesoporous Co₃O₄, NiO, and their metals were synthesized by nanocasting method using there corresponding mesoporous SBA-15 silica as a template. The obtained porous metal oxides have high surface areas, large pore volume, and a narrow pore size distribution. The N₂-adsorption data for mesoporous metal oxides have provided the BET area of 257.7 m² g⁻¹ and the total pore volume of 0.46 cm³ g⁻¹. The mesoporous metals were employed as a catalyst in the synthesis of (S)-3-pyrrolidinol from chiral (S)-4-chloro-3-hydroxybutyronitrile, and a high yield to (S)-3-pyrrolidinol-salt was obtained on the mesoporous Co metal catalyst.     

Only Ku-band microwave absorption by Fe3O4/ferrocenyl-CuPc hybrid nanospheres

A novel kind of hybrid nanospheres made of Fe₃O₄ and ferrocenyl-CuPc (FCP) was prepared via effective solvothermal method and performed microwave absorptivity only in Ku-band with minimum reflection loss of −25 dB at 16.0 GHz corresponding to absorbing about 99.7% content of microwave. Scanning electron microscopy images indicated that the nanospheres with uniform particle size distribution have the average diameter of 135 nm. Due to the synergistic reaction between magnetic ferrocenyl-CuPc and Fe₃O₄, the hybrid nanospheres showed novel electromagnetic properties. The real part of complex permittivity of hybrid nanospheres remains stable in the range of 0.5–12.0 GHz and has a large fluctuation at 16.5 GHz. Moreover, the dielectric loss of hybrid nanospheres also appeared a sharp peak at 16.3 GHz with the value of 2.7. The specific gravity of hybrid nanospheres is about 2.08. On the basis of these results, the novel hybrids are believed to have potential applications in the microwave absorbing area in Ku-band.     

A facile method to synthesize magnetic polymer nanospheres with multifunctional groups

Magnetic poly(styrene methyl methacrylate)/Fe₃O₄ nanospheres with ester groups were prepared by a modified one-step mini-emulsion polymerization in the presence of Fe₃O₄ ferrofluids. The effects of monomer dose, surfactant content, ferrofluid concentration and initiator content on the particle characteristics such as the size, morphology and magnetic properties were investigated by Fourier-transform infrared spectroscopy, transmission electron microscopy, thermogravimetric analysis and vibrating sample magnetometer. The results indicated that magnetic nanospheres were superparamagnetic with high saturation magnetization of 51.0 emu/g and corresponding magnetite content of 61.5 wt%. Subsequently, magnetic nanospheres with carboxyl and amino groups were also obtained by hydrolysis and ammonolysis reaction. These magnetic nanospheres with multifunctional groups have biomedical applications.     

Preparation of novel magnetic fluorescent nanospheres by sonochemical method

This study focuses on the preparation and characterization of magnetic fluorescent nanospheres (MFNs). MFNs are prepared using a sonochemical method in the presence of hydrophobic Fe₃O₄ nanopaticles, and then the nanospheres are modified with Rhodamine B through an electrostatic interaction. The properties of MFNs are characterized using transmission electron microscopy, Fourier-transform infrared, thermogravimetric analysis, vibration sample magnetometry, and fluorescence emission spectrum. The results indicate that the superparamagnetic nanospheres have a particle size of 160 nm, high saturation magnetization of 54 emu/g, and significant fluorescence. MFNs possess potential in medical imaging, drug targeting, and catalysis. The possible formation mechanism of MFNs is discussed.     

Solvothermal synthesis and characterization of CdSe nanocrystals with controllable phase and morphology

Zinc blende (ZB) CdSe hollow nanospheres were solvothermally synthesized from the reaction of Cd(NO₃)₂·4H₂O with a homogeneously secondary Se source, which was first prepared by dissolving Se powder in the mixture of ethanol and oleic acid at 205 °C. As Se power directly reacted with Cd(NO₃)₂·4H₂O in the above mixed solvents, wurtzite (W) CdSe solid nanoparticles were produced. Time-dependent experiments suggested that the formation of CdSe hollow nanospheres was attributed to an inside-out Ostwald ripening process. The influences of reaction time, temperature and ethanol/oleic acid volume ratio on the morphology, phase and size of the hollow nanospheres were also studied. Infrared (IR) spectroscopy investigations revealed that oleic acid with long alkene chains behaved as a reducing agent to reduce Se powder to Se²⁻ in the synthesis. Photoluminescence (PL) measurements showed that the ZB CdSe hollow nanospheres presented an obvious blue-shifted emission by 42 nm, and the W CdSe solid nanoparticles exhibited a band gap emission of bulk counterpart.     

The influence of H2/(H2 + Ar) ratio on microstructure and optoelectronic properties of microcrystalline silicon films deposited by plasma-enhanced CVD

Hydrogenated microcrystalline silicon films were deposited by glow discharge decomposition of SiH₄ diluted in mixed gas of Ar and H₂. By investigating the dependence of the film crystallinity on the flow rates of Ar and H₂, we showed that the addition of Ar in diluted gas markedly improves the crystallinity due to an enhanced dissociation of SiH₄. The infrared-absorption spectrum reveals that the fraction of SiH bonding increases with increasing the rate ratio of H₂/(H₂ + Ar). The surface roughness of the films increases with increasing the flow rate ratio of H₂/(H₂ + Ar), which is attributed to the decrease of massive bombardment of Ar ions in the plasma. Refractive index and absorption coefficient of the films were obtained by simulating the optical transmission spectra using a modified envelope method. Electrical measurements of the films show that the dark conductivity increases and the activation energy decreases with the ratio of H₂/(H₂ + Ar). A reasonable explanation is presented for the dependence of the microstructure and optoelectronic properties on the flow rate ratio of H₂/(H₂ + Ar).     

Structural and magnetic properties of self-assembled Sm-Co spherical aggregates

Self-assembled Sm-Co nanoparticles in the form of spherical aggregates (referred as nanospheres) with diameter ranging from 50 to 180 nm were achieved by means of polyol technique. The size distribution of the Sm-Co nanospheres can be regulated close to ∼100 nm by controlling the molar ratio of Sm:Co precursor. The spherical aggregates exhibited Sm₂Co₇ phase as a major constituent; while the aggregates obtained at higher Co concentration showed co-existence of Co-phase with Sm₂Co₇ phase. Upon annealing, the biphasic nature of nanospheres (Sm₂Co₇/Co) transformed into Sm₂Co₁₇ structure. By varying the Sm:Co precursor ratio from 1:5 to 1:9, the coercivity (H_c) and magnetization (M_s) values of the as-synthesized nanospheres can be tuned from 336 to 140 Oe and from 63.7 to 108 emu/g, respectively, and these values significantly improved after annealing. Maximum values of H_c (1050 Oe) at the Sm:Co molar ratio of 1:5 and M_s of 184.6 emu/g at the Sm:Co molar ratio of 1:9 were achieved in the annealed samples.     

Substrate effect on excimer laser assisted crystal growth in phosphor Ca0.997Pr0.002TiO3 polycrystalline thin films

Ca_0.997Pr_0.002TiO₃ thin films that show strong red luminescence were successfully prepared by means of an excimer laser assisted metal organic deposition process with a KrF laser at a fluence of 100 mJ/cm² at 100 °C. The CPTO films grew on the silica, borosilicate, and indium-tin-oxide coated glasses. The crystallinity of the Ca_0.997Pr_0.002TiO₃ films depended on the substrates; the borosilicate and indium-tin-oxide coated glasses with a large optical absorption of a KrF laser (λ = 248 nm) were effective for the crystallization for the Ca_0.997Pr_0.002TiO₃. In addition, a high thermal conductivity of the indium-tin-oxide coated glass substrate could also improve the crystallinity due to an enhancement of thermal propagation to the film. Oxygen annealing at 500 °C for 6 h successfully eliminated the oxygen vacancy produced by the laser irradiation, and also remarkably improved the PL emission intensity. Thus, we have shown that substrate properties such as an optical absorbance and a thermal conductivity were quite important factors for the crystal growth and the PL emission for the Ca_0.997Pr_0.002TiO₃ in the excimer laser assisted metal organic deposition process.     

Stability and characterization of mesoporous molecular sieve using natural clay as a raw material obtained by microwave irradiation

Mesoporous molecular sieve was synthesized via microwave irradiation method, and using natural clay, sodium silicate and aluminum chloride as raw materials and cetyl trimethyl ammonium bromide (CTAB) as a template agent under alkaline condition. The samples were characterized by various analytic and spectroscopic tools such as XRD, FT-IR, TEM, TG-DSC and N₂ physical adsorption, respectively. The results show that the synthesized sample has typical mesoporous structure and exhibits good mesoporous ordering. On the other hand, the as synthesized sample after calcination at 550 °C for 10 h has a surface area of 576.0 m²/g and an average pore size of 4.83 nm. Furthermore, the synthesized mesoporous molecular sieve still exhibits good mesoporous ordering after calcination at 750 °C for 3 h or hydrothermal treatment at 100 °C for 10 days.     

Effect of the thermal and hydrothermal treatment on textural properties of Zr-MCM-41 mesoporous molecular sieve

Zr-containing mesoporous molecular sieves were synthesized by hydrothermal method using cetyltrimethyl ammonium bromide as a template and sodium silicate and zirconium sulfate as raw materials. The structure and morphology of the synthesized samples were characterized via various physicochemical methods, including X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectroscopy, solid state nuclear magnetic resonance (²⁹Si MAS-NMR) techniques, thermal gravimetric-differential scanning calorimeter (TG-DSC) and N₂ physical adsorption, respectively. The effect of the different initial ZrO₂:SiO₂ molar ratio, the different thermal treatment temperature and the different hydrothermal treatment time on textural property was investigated. The experimental results reveal that the as synthesized samples possess a typical mesoporous structure of MCM-41. On the other hand, the specific surface area and pore volume of the synthesized Zr-MCM-41 mesoporous molecular sieve decrease with the increase of the amount of zirconium incorporated in the starting material, the rise of thermal treatment temperature and the prolonging of hydrothermal treatment time, the mesoporous ordering becomes poor. Also, when the molar ratio of ZrO₂:SiO₂ in the starting material is 0.1, the mesoporous structure of the Zr-MCM-41 mesoporous molecular sieve still retains after calcination at 750 °C for 3 h or hydrothermal treatment at 100 °C for 6 d, and have specific surface areas of 423.9 and 563.9 m²/g, respectively.     

Influence of porous morphology on optical dispersion properties of template free mesoporous titanium dioxide (TiO2) films

This paper focuses the influence of porous morphology on the microstructure and optical properties of TiO₂ films prepared by different sol concentration and calcination temperatures. Mesoporous TiO₂ thin films were prepared on the glass substrates by sol-gel dip coating technique using titanium (IV) isopropoxide. Porous morphology of the films can be regulated by chemical kinetics and is studied by scanning electron microscopy. The optical dispersion parameters such as refractive index (n), oscillator energy (E_d), and particle co-ordination number (N_c) of the mesoporous TiO₂ films were studied using Swanepoel and Wemple-DiDomenico single oscillator models. The higher precursor concentration (0.06 M), films exhibit high porosity and refractive index, which are modified under calcination treatment. Calcinated films of low metal precursor concentration (0.03 M) possess higher particle co-ordination number (N_c = 5.05) than that of 0.06 M films (N_c = 4.90) due to calcination at 400 °C. The lattice dielectric constant (E_∞) of mesoporous TiO₂ films was determined by using Spintzer model. Urbach energy of the mesoporous films has been estimated for both concentration and the analysis revealed the strong dependence of Urbach energy on porous morphology. The influence of porous morphology on the optical dispersion properties also has been explained briefly in this paper.     

Synthesis and characterization of Co (Ni or Cu)-MCM-41 mesoporous molecular sieves with different amount of metal obtained by using microwave irradiation method

Co (Ni or Cu)-MCM-41 mesoporous molecular sieves with different amount of metal were synthesized by using cetyltrimethyl ammonium bromide as a template and by a novel microwave irradiation method. These samples were characterized by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR) and N₂ physical adsorption. The experimental results show that Co (Ni or Cu)-MCM-41 mesoporous molecular sieves were successfully synthesized. When the as-synthesized samples were calcined at 550 °C for 10 h, the template was effectively removed. Under microwave irradiation condition, Co-MCM-41 mesoporous molecular sieves have specific surface areas in a range of 745.7-1188.8 m²/g and average pore sizes in a range of 2.46-2.75 nm; Ni-MCM-41 mesoporous molecular sieves have specific surface areas in a range of 625.8-1161.3 m²/g and average pore sizes of ca. 2.7 nm; Cu-MCM-41 mesoporous molecular sieves have specific surface areas in a range of 601.6-1142.9 m²/g and average pore sizes in a range of 2.46-2.76 nm. On the other hand, with increasing the introduced metal amount, the specific surface area and pore volume of the synthesized Co (Ni or Cu)-MCM-41 mesoporous molecular sieves became small, and the mesoporous ordering of the samples became poor. Under the comparable synthesis conditions, the synthesized Co-MCM-41 mesoporous molecular sieve has a bigger specific surface area and a more uniform pore distribution as compared with the synthesized Ni-MCM-41and Cu-MCM-41 mesoporous molecular sieves.     

Exchange coupling in CoO–Co bilayer

In this work, exchange bias and coercivity enhancement in ferromagnet (FM)–antiferromagnet (AFM) bilayer have been investigated. CoO film (50 nm) was deposited by sputtering with a relatively high oxygen partial pressure. The deposited films were subsequently annealed at varied temperature up to 973 K in the air atmosphere. The CoO film shows a disordered structure in the as-deposited state and an increase of crystallinity after annealing characterized by XRD and Raman spectra. A 40-nm Co film was deposited on the as-deposited CoO and annealed films. The Co–CoO bilayer shows a large exchange bias up to 1600 Oe and relatively high coercivity up to 3200 Oe (H_C−) at 5 K, which is much larger than that of crystalline Co–CoO bilayer films without any treatment. The spin glass behavior combined with increasing crystallinity, surface roughness of CoO after annealing may be attributed to the large exchange bias and high coercivity.     

Magnetic nanocomposite spinel and FeCo core-shell and mesoporous systems

The fabrication of condensed silica and mesoporous silica coated spinel CoFe₂O₄ and FeCo alloy magnetic nanocomposites are reported. The encapsulation of well-defined 5 nm thick uniform silica layer on CoFe₂O₄ magnetic nanoparticles was performed. The formation of mesopores in the shell was a consequence of removal of organic group of the precursor through annealing. The NiO nanoparticles were loaded into the mesoporous silica. The mesoporous silica shells leads to a larger coercivity than that of pure CoFe₂O₄ magnetic nanoparticles due to the decrease of interparticle interactions and magneto-elastic anisotropy. In addition, the FeCo nanoparticles were coated by condensed and mesoporous silica. The condensed silica can protect the reactive FeCo alloy from oxidation up to 300 °C. However, saturation magnetization of FeCo nanoparticles coated by silica after 400 °C annealing is dramatically decreased due to the oxidation of the FeCo core. The mesoporous silica coated magnetic nanostructure loaded with NiO as a final product could be used in the field of biomedical applications.     

Preparation of Ru-loaded CdS/Al-HMS nanocomposites and production of hydrogen by photocatalytic degradation of formic acid

The composite of aluminum-substituted mesoporous silica (Al-HMS) molecular sieve coupled with CdS (CdS/Al-HMS) was prepared by template, ion exchange and sulfurization reactions. The result of low angle XRD patterns showed that the low content of 2.5 wt% CdS is incorporated inside Al-HMS channels. The results of diffuse reflectance UV-visible spectra and fluorescence emission spectra exhibited that the absorption edge and photoluminescence peak for CdS/Al-HMS are blue-shifted about 75 nm and 40 nm in comparison to bulk CdS, respectively. The activities of hydrogen production by photocatalytic degradation of formic acid were evaluated under visible light irradiation (λ ≥ 420 nm) and the CdS/Al-HMS loaded 0.07 wt% Ru showed the highest H₂ evolution at a rate of 3.7 mL h⁻¹ with an apparent quantum yield of 1.2% at 420 nm.     

Preparation and electrochemical characterization of cobalt-manganese oxide as electrode materials for electrochemical capacitors

Cobalt-manganese oxide materials (CMOs) were prepared by chemical method and heat treated at 150, 400, 600, 800 and 1000 °C, respectively. The physical and electrochemical properties of the materials were characterized. The heat treatment process leads to the removal of water molecules adsorbed on the surface of CMO particles (below 400 °C) and the progressive reduction of Mn and Co ions from Mn⁴⁺ and Co³⁺ to Mn³⁺/Mn²⁺ and Co²⁺, respectively (440-1000 °C). CMOs obtained by treatment below 800 °C have poor crystallinity and a highly crystallized tetragonal phase by treatment at 1000 °C. The ratio of Mn and Co in CMOs is found by EDX analysis to be about 2:1. The electrochemical testing results indicate that the high crystallization of CMO is disadvantageous for the energy storage as electrode material of electrochemical capacitors. However, for CMOs with poor crystallinity, relatively high specific capacitances can be obtained. The incorporation of protons and ions into the CMO's lattice during electrochemical charge/discharge process leads to the distortion of crystal lattice and improvement of crystallinity of CMO. The XRD patterns show that negative electrode (NE) and positive electrode (PE) have tetragonal (Co, Mn)(Mn, Co)₂O₄ phase.     

The role of oxygen and hydrogen partial pressures on structural and optical properties of ITO films deposited by reactive rf-magnetron sputtering

Sn doped In₂O₃ films are deposited by rf-magnetron sputtering at 300 °C under Ar, Ar + O₂ and Ar + H₂ gas ambients. For the film prepared under argon ambient, electrical resistivity 6.5 × 10⁻⁴ Ω cm and 95% optical transmission in the visible region have been achieved optimizing the power and chamber pressure during the film deposition. X-ray diffraction spectra of the ITO film reveal (2 2 2) and (4 0 0) crystallographic planes of In₂O₃. With the introduction of 1.33% oxygen in argon, (2 2 2) peak of In₂O₃ decreases and resistivity increases for the deposited film. With further increase of oxygen in the sputtering gas mixture crystallinity in the film deteriorates and both the peaks disappeared. On the other hand, when 1.33% hydrogen is mixed with argon, the resistivity of the deposited film decreases to 5.5 × 10⁻⁴ Ω cm and the crystallinity remains almost unchanged. In case of reactive sputtering, the deposition rate is lower compared to that in case of non-reactive sputtering. HRTEM and first Fourier patterns show the highly crystalline structure of the samples deposited under Ar and Ar + H₂ ambients. Crystallinity of the film becomes lower with the introduction of oxygen in argon but refractive index increases from 1.86 to 1.9. The surface morphology of the ITO films have been studied by high resolution scanning electron microscopy.     

Luminescent characteristics of CaTiO3:Pr thin films prepared by pulsed laser deposition method with various substrates

CaTiO₃:Pr³⁺ films were deposited on different substrates such as Al₂O₃ (0 0 0 1), Si (1 0 0), MgO (1 0 0), and fused silica using pulsed laser deposition method. The crystallinity and surface morphology of these films were investigated by XRD and SEM measurements. The films grown on the different substrates have different crystallinity and morphology. The FWHM of (2 0 0) peak are 0.18, 0.25, 0.28, and 0.30 for Al₂O₃ (0 0 0 1), Si (1 0 0), MgO (1 0 0), and fused silica, respectively. The grain sizes of phosphors grown on different substrates were estimated by using Scherrer's formula and the maximum crystallite size observed for the thin film grown on Al₂O₃ (0 0 0 1). The room temperature PL spectra exhibit only the red emission peak at 613 nm radiated from the transition of (¹D₂ → ³H₄) and the maximum PL intensity for the films grown on the Al₂O₃ (0 0 0 1) is 1.1, 1.4, and 3.7 times higher than that of the CaTiO₃:Pr³⁺ films grown on MgO (1 0 0), Si (1 0 0), and fused Sillica substrates, respectively. The crystallinity, surface morphology and luminescence spectra of thin-film phosphors were highly dependent on substrates.     

Mesoporous TiO2-B nanowires synthesized from tetrabutyl titanate

Ultralong mesoporous TiO₂-B nanowires were synthesized via a hybrid hydrothermal-ion exchanging-thermal treatment using tetrabutyl titanate (TBOT) as a raw material. The phase transformations and porous structures of TiO₂-B nanowires were characterized and studied by X-ray diffraction (XRD), transmission electron microscopy (TEM) and N₂ adsorption-desorption measurement. Mesoporous TiO₂-B nanowires showed a length of several micrometers and diameter of about 25 nm. The porous structures of obtained TiO₂-B nanowires were demonstrated by BJH pore distribution measurement. The wirelike morphologies and porous structures of monodisperse nanowires calcined at 600 °C showed little change, which indicated that such nanowires possessed high thermal stability. The formation mechanism of TiO₂-B nanowires with mesoporous structures were also discussed based on our experimental results.