Deformation behavior of Zr-based bulk metallic glass and composite in the supercooled liquid region

A Zr-based bulk metallic glass (BMG) with a composition of (Zr₇₅Cu₂₅)_78.5Ta₄Ni₁₀Al_7.5 and a bulk metallic glass matrix composite (BMGC) with a composition of (Zr₇₅Cu₂₅)_74.5Ta₈Ni₁₀Al_7.5 have been prepared by copper-mold casting. The compressive deformation behavior of the BMG and BMGC was investigated in the supercooled region at different temperatures and various strain rates ranging from 8×10⁻⁴ s⁻¹ to 8×10⁻² s⁻¹. It was found that both the strain rate and test temperature significantly affect the deformation behavior of the two alloys. The deformation follows Newtonian flow at low strain rates but non-Newtonian flow at high strain rates. The deformation mechanism for the two kinds of alloys was discussed in terms of the transition state theory. Supported by the National Natural Science Foundation of China (grant Nos. 50471060 and 50635020)     

Formation and magnetic properties of Co–Fe-based bulk metallic glasses with supercooled liquid region

A new Co–Fe-based ferromagnetic bulk metallic glass (BMG) was synthesized by copper mould casting method. The thermal stability and crystallization processes were investigated by differential scanning calorimetry (DSC) and X-ray diffraction (XRD). The soft magnetic behavior was studied by DC magnetic measurements. The high glass formation ability was interpreted in terms of the effective suppression of nucleation and growth of the intermetallic compounds which appear in the multicomponent system during solidification. The high thermal stability indicates that the new Co–Fe-based BMG could be used as high-temperature magnetic material. The low coercivity which was as low as 8 A/m for the as-cast sample was found in the Co–Fe-based metallic glass cylinder with a diameter of 1.5 mm.     

Interactions between high-temperature deformation and crystallization in zirconium-based bulk metallic glasses

High-temperature deformation of a ZrTiCuNiBe bulk metallic glass (BMG) is investigated by compression tests in the supercooled liquid region. When the temperature is decreased or strain rate increased, the amorphous alloy exhibits the usual Newtonian/non-Newtonian transition behaviour. Using specific heat treatments, partially crystallized alloys are produced, the associated microstructures characterized and the volume fractions of the crystal measured. The interaction between high-temperature deformation and crystallization is investigated by appropriate mechanical testing. According to these measurements, partial crystallization is responsible for a significant increase in flow stress and the promotion of non-Newtonian behaviour. Deformation does not significantly change the volume fraction, composition or size of the crystal. The flow-stress increase with crystallization is analyzed under different hypotheses. We conclude that the flow-stress increase cannot be interpreted through a compositional change in the residual amorphous matrix, either by reinforcement due to hard crystallites or by connections between crystals. It appears that the effect is due to the nanometric size of the crystals alone.     

金属玻璃的热塑性成型

金属玻璃在其过冷液相区内表现出随着温度升高黏度逐渐降低的特性,因此可以对其进行热塑性加工.该性质颠覆了传统金属的加工成型方式,使得其在远低于传统金属材料加工的温度和应力作用下可以按照人们的要求进行成型.因此,一些具有低玻璃转变温度的金属玻璃又被称作金属塑料.另外,由于金属玻璃是一种无序结构材料,不存在位错、晶界等晶体缺陷,且热膨胀系数小,在热塑性成型中具有优异的尺寸精度,因此被认为是理想的微成型材料,有广阔的应用前景.本文系统介绍了金属玻璃的热塑性成型性质及其应用,从热塑性成型的基本概念出发,阐述了金属玻璃热塑性成型能力的评估指标、热塑性成型技术、热塑性微成型及其理论、热塑性微成型的应用等,对认识金属玻璃的热塑性及扩展其应用有重要的意义.     

Corrosion behavior of bulk metallic glasses in different aqueous solutions

The corrosion behavior of as-cast fully amorphous, structural relaxed amorphous and crystallized Fe65.5Cr4Mo4Ga4P12C5B5.5 bulk metallic glasses (BMGs) in NaCl, HCl and NaOH solutions was investigated by electrochemical polarization and immersion methods. X-ray photoelectron spectroscopy measurements was used to analyze the changes of the elements on the alloy surface before and after immersion in various solutions. The corrosion resistance of the Fe65.5Cr4Mo4Ga4P12C5B5.5 BMG was better than its structural r...     

金属玻璃的断裂机理与其断裂韧度的关系

本文选取了三种不同断裂韧度值的金属玻璃Zr41.25Ti13.75Ni10Cu12.5Be22.5,Ce68Al10Cu20Co2和Fe41Co7Cr15Mo14Y2C15B6,通过压缩实验测量了它们的应力-应变关系;样品断裂以后观察了其断口形貌,发现这三种金属玻璃具有不同的断裂模式.经过对这三种金属玻璃做缺口三点弯曲实验,利用数字散斑技术研究了缺口前端应变集中方向弹性应变场的演化过程.根据金属玻璃的屈服准则,阐述了不同断裂韧度值的金属玻璃的断裂机理.     

LaGa-based bulk metallic glasses

We report the formation of La Ga-based bulk metallic glasses. Ternary La–Ga–Cu glassy rods of 2–3 mm in diameter can be easily formed in a wide composition range by the conventional copper mold casting method. With minor addition of extra elements such as Co, Ni, Fe, Nb, Y, and Zr, the critical diameter of the full glassy rods of the La–Ga–Cu matrix can be markedly enhanced to at least 5 mm. The characteristics and properties of these new La Ga-based bulk metallic glasses with excellent glass formation ability and low glass transition temperature are model systems for fundamental issues investigation and could have some potential applications in micromachining field.     

The effect of Nb addition on the thermal stability and magnetic properties of Fe-based amorphous alloys with a wide supercooled liquid region

We have examined the effect of Nb addition on the thermal stability of the supercooled liquid before crystallization, the glass-forming ability and magnetic properties for the amorphous alloy series Fe₇₃Nb_xAl_5-xGe₂P₁₀C₆B₄ and Fe₆₃Co₇Nb_xZr_10-xB₂₀. The supercooled liquid regions (ΔT_x=T_x-T_g) have maximum values of 66 and 79K, respectively, for Fe₇₃Nb₁Al₄Ge₂P₁₀C₆B₄ and Fe₆₃Co₇Nb₄Zr₆B₂₀ alloys. The saturation magnetization σ_s of the Fe₇₃Nb_xAl_5-xGe₂P₁₀C₆B₄ alloy system is much higher than that of the Fe₆₃Co₇Nb_xZr_10-xB₂₀ alloy system, and is almost unchanged with an increasing Nb content from 0 to 3 at%. But the σ_s of the Fe₆₃Co₇Nb_xZr_10-xB₂₀ alloys decreases linearly with increasing Nb content. The coercive force H_c of the two alloy series can have a minimum value of 31A/m for Fe₇₃Nb₁Al₄Ge₂P₁₀C₆B₄ and 37A/m for Fe₆₃Co₇Nb₄Zr₆B₂₀. All these values are for the ribbons annealed at 773 and 873K for 15min in vacuum.     

非晶合金及合金液体的局域五次对称性

简要回顾了从20世纪30年代至今,有关非晶合金及合金液体的局域结构五次对称性的实验、理论和模拟研究.在简单液体的早期研究中,人们已经意识到五次对称性在简单液体的无序结构、过冷和晶化等起着重要作用,二十面体短程序作为五次对称性的典型代表受到了广泛关注.自从Frank提出简单液体中二十面体短程序的结构单元,大量的理论和实验研究已经明确在简单液体、合金液体和金属玻璃中存在局域五次对称性,并且建立了局域五次对称性与合金液体复杂动力学行为、玻璃转变、液体-液体相变以及非晶合金的形变等统一的定量描述和物理图像,表明了局域五次对称性作为结构参量的简单、普遍和有效性.     

Effects of crystallization fractions on mechanical properties of Zr-based metallic glass matrix composites

The Zr41Ti14Cu12.5Ni10Be22.5 (at.%) bulk metallic glass composites with various crystallization fractions were prepared by pretreating the bulk metallic glassy samples with pulsing current, and then by isothermal annealing at near initial crystallization temperature for different periods of time. The precipitations and crystallization fractions were studied by X-ray diffraction (XRD) and differential scanning calorimetry (DSC), and their effects on mechanical properties of the composite were studied by micr...     

Minor alloying behavior in bulk metallic glasses and high-entropy alloys

The effect of minor alloying on several bulk metallic glasses and high-entropy alloys was studied. It was found that minor Nb addition can optimize the interface structure between the W fiber and the Zr-based bulk metallic glass in the composites, and improve the mechanical properties. Minor Y addition can destabilize the crystalline phases by inducing lattice distortion as a result to improve the glass-forming ability, and the lattice distortion energy is closely related to the efficiency of space filling of the competing crystalline phases. A long-period ordered structure can precipitate in the Mg-based bulk metallic glass by yttrium alloying. For the high-entropy alloys, solid solution can be formed by alloying, and its mechanical properties can be comparable to most of the bulk metallic glasses.     

Fe-B-Y-Nb bulk metallic glasses in relation to clusters

Bulk metallic glass formations in the Fe-B-Y-Nb quaternary alloy system were investigated by using the cluster line rule in combination with the minor alloying principle. The Fe-B-Y ternary system was selected as the basic system and the intersections of cluster lines were taken as the basic ternary compositions. The basic compositions were further alloyed with minor amounts of Nb. After 3–5 at.% Nb was added, the basic composition Fe_68.6B_25.7Y_5.7, which was developed from the most densely packed cluster Fe₈B₃, formed 3 mm bulk metallic glasses. These quaternary bulk metallic glasses (Fe_68.6B_25.7Y_5.7)_100−x Nb _x (x = 3–5 at.%) are expressed approximately with a unified simple composition formula: (Fe₈B₃)₁(Y, Nb)₁. The (Fe_68.6B_25.7Y_5.7)₉₇Nb₃ bulk metallic glass has the largest glass forming ability with the following characteristic parameters T _g = 907 K, T _x = 1006 K, T _g/T _l = 0.644, γ = 0.434, and longness t = 22 mm. The combination of the cluster line rule and the minor-alloying principle is a promising new route towards the quantitative composition design of multi-component metallic glasses. Supported by the National Natural Science Foundation of China (Grant Nos. 50671018, 50631010 and 50401020) and the National Basic Research Program of China (Grant No. 2007CB613902)     

具有优良玻璃形成能力添加Al的CuZr基大块金属玻璃

在CuZr二元大块金属玻璃的基础上，利用铜模吸铸方法制备出了添加Al组元的CuZr 基大块 金属玻璃.CuZr基大块金属玻璃在很宽的成分范围内有很强的玻璃形成能力，在Al含量从4％ 到8％之间，CuZr基大块金属玻璃都可以做出直径至少5 mm的非晶样品.通过实验分析，解释 了CuZr基大块金属玻璃具有良好玻璃形成能力的物理机理.CuZr基金属玻璃组分简单、成本 低廉，有潜在的应用价值；同时，制备CuZr基金属玻璃的方法为开发新的大块金属玻璃体系 提供了一条切实有效的途经. 关键词： 大块金属玻璃 玻璃形成能力 CuZr基金属玻璃     

Al-Ni-RE非晶合金的晶化行为和热稳定性

本文制备了一系列Al-Ni-RE (RE=La, Ce, Y) 非晶合金薄带, 利用差示量热扫描仪和X射线衍射仪考察了非晶合金的晶化行为和初生相, 并分析了其与合金成分和原子特性间的关系. 结果表明: 在拓扑不稳定参数λ以有效原子半径修正为λ'后, 每一Al-Ni-RE非晶合金体系可由其两个临界值划分为纳米晶、纳米玻璃和玻璃三类; Al-Ni-RE非晶合金的晶化开始温度和混合焓与λ'成良好的线性关系, 即λ'能很好的表征Al基非晶合金的热稳定性. 关键词： Al基非晶 玻璃转变 初生相 热稳定性     

Deformation behavior and enhanced plasticity of Ti-based metallic glasses with notches

The plasticity of Ti-based metallic glasses with different aspect ratios can be improved by introducing two semicircular notches on the edges of the samples, owing to the interactions of shear bands (SBs) under conventional compression tests. The interaction of SBs can be ascribed to the easy initiation of SBs around the notches due to the large stress gradient, and the consequent blocking effect of notches on the propagation of shear bands. Additionally, the current findings provide a new way to understand the physical nature for the plastic deformation behavior of some brittle metallic glasses and supply an effective approach to enhance the plasticity to some extent.     

Energy model for the Zr-based metallic glass alloy melt with clusters

An energy model for the melt of bulk metallic glass (BMG) with clusters was established, the Gibbs free energy and interfacial energy for the Zr-Al-Ni ternary alloy melt with Zr2Ni clusters were calculated, and the effects of the clusters on the Gibbs free energy, interfacial energy and nucleation rate were analyzed. The results showed that the existence of the clusters in the Zr-Al-Ni ternary alloy melt enables the Gibbs free energy to decrease in the composition range where bulk metallic glass forms easily, makes the interfacial energy increase and changes the distribution of the interfacial energy with the alloy composition. Because of the clusters in the melt, the Gibbs free energy of the Zr66Al8Ni26 alloy melt decreases about 0.3-1 kJ/mol and the interfacial energy between the melt and crystal nucleus increases about 0.016 J/m2. The nucleation rate of the undercooled Zr66Al8Ni26 alloy melt decreases evidently under the influence of the clusters on Gibbs free energy and the interfacial energy, and the maximum of the nucleation rate in the melt with the Zr2Ni clusters is only about 107 mol-1·s-1.     

永磁性Pr55Al12Fe30Cu3 大块金属玻璃

报道一个新的Pr55Al12Fe30Cu3 大块金属玻璃.采用铜模吸铸法制备了直径为5 mm、长度达100 mm的Pr55Al12Fe30Cu3 大块金属玻璃.差示扫描量热分析结果表明在该Pr基大块金属玻璃体系具有宽达64 K左右的过冷液相区，而且该合金呈非晶态时的熔化温度要比相应晶态样品的熔化温度高约140 K.磁滞回线测量表明非晶态Pr55Al12Fe30Cu3 块体合金在室温下呈现永磁特性，而完全晶化后样品在室温下呈现软磁特性. 关键词： 大块金属玻璃 玻璃转变 晶化 永磁性     

Thermodynamical properties of Zr-based bulk metallic glasses

The temperature dependence of Gibb's free energy difference (ΔG), entropy difference (ΔS) and enthalpy difference (ΔH) between the undercooled melt and the corresponding equilibrium solid phases of bulk metallic glass (BMG) forming melts has been proved to be very useful in the study of their thermodynamical behavior. The present study is made by calculating ΔG, ΔS and ΔH in the entire temperature range T_m (melting temperature) to T_g (glass transition temperature) for three Zr-based samples of BMGs: Zr₅₇Cu_15.4Ni_12.6Al₁₀Nb₅, Zr_41.2Ti_13.8Ni₁₀Cu_12.5Be_22.5 and Zr_58.5Cu_15.6Ni_12.8Al_10.3Nb_2.8. The study is made on the basis of Taylor's series expansion and a comparative study is also performed between the present result and the result obtained in the framework of expansions proposed by earlier workers, and also with the experimental results. An attempt has also been made to study the glass forming ability for BMGs.     

Prediction of spinodal wavelength in continuously cooled metallic liquid

The spinodal decomposition of a deeply undercooled metallic liquid Zr_41.2 Ti_13.8Cu_12.5Ni₁₀Be_22.5 between 800 and 700 K is analysed in the framework of the theory of Cahn and Hilliard for continuous cooling, and the wavelength with maximum amplification is predicted, using as input parameters thermodynamic values gained in experiments. Electron microscopical studies show the microstructure of glass forming alloys Zr_41.2Ti_13.8Cu_12.5Ni₁₀Be_22.5. The as‐cast material exhibits a two phase mixture of amorphous regions with different compositions. Evidence for spinodal decomposition is given, and the computed maximum‐amplitude wavelength corresponds well with the one found in the experiments.     

高压下Co在Zr46．75Ti8．25Cu7．5Ni10Be27．5大块金属玻璃过冷液相区中的扩散

通过离子注入结合二次离子质谱分析方法 ,研究了高压下Co在Zr4 6 .75Ti8.2 5Cu7.5Ni1 0 Be2 7.5大块金属玻璃过冷液相区中的扩散行为 .在 6 0 3K时 ,Co在Zr4 6 .75Ti8.2 5Cu7.5Ni1 0 Be2 7.5大块金属玻璃中的扩散系数随压力的增大而增大 ,其扩散激活体积ΔV =- 1.2 36Ω ,Ω是合金的平均原子体积 .结果表明 ,在热平衡状态下Co在Zr4 6 .75Ti8.2 5Cu7.5Ni1 0Be2 7.5大块金属玻璃中的扩散是通过间隙机理进行的