Salt effect on the complex formation between polyelectrolyte and oppositely charged surfactant in aqueous solution

The complex formation between sodium carboxymethylcellulose (NaCMC) and dodecyltrimethylammonium bromide (DTAB) at various sodium bromide concentrations (C(NaBr)) has been studied by microcalorimetry, turbidimetric titration, steady-state fluorescence measurements, and the fluorescence polarization technique. The addition of salt is found to influence the formation of NaCMC/DTAB complexes markedly. At C(NaBr) = 0.00, 0.01, 0.02, 0.10, and 0.20 M, DTAB monomers form micelle-like aggregates on NaCMC chains to form NaCMC/DTAB complexes above the critical surfactant concentration (C1). At C(NaBr) = 0.23 M, DTAB molecules first form micelles above a 2.46 mM DTAB concentration prompted by the added salt, and then, above C1 = 4.40 mM, these micelles can aggregate with NaCMC chains to form NaCMC/DTAB complexes. However, at C(NaBr) = 0.25 M, there is no NaCMC/DTAB complex formation because of the complete salt screening of the electrostatic attraction between DTAB micelles and NaCMC chains. It is also surprisingly found that the addition of NaBr can bring out a decrease in C1 at C(NaBr) < 0.20 M. Moreover, the addition of NaBr to a mixture of 0.01 g/L NaCMC and 3.6 mM DTAB can directly induce the formation of NaCMC/DTAB complexes. This salt-enhancing effect on the complex formation is explained as the result of competition between the screening of interaction of polyelectrolyte with surfactant and the increasing of polyelectrolyte/surfactant interaction owing to the growth of micelles by added salt. When the increasing of polyelectrolyte/surfactant interaction exceeds the screening of interaction, the complex formation can be enhanced.     

Phase behaviour of oppositely charged protein and surfactant mixtures: DOTAC-BLG-Water

The interactions between the negatively charged protein, β-lactoglobulin (BLG) and the cationic surfactant dodecyltrimethylammonium chloride (DOTAC) in water have been investigated by determining the phase equilibria of the ternary system within the concentration range of 20 wt.% of both protein and surfactant. Three main regions are formed—an isotropic solution phase, a white precipitation region and a blueish, isotropic, highly viscous gel phase. The protein solution can solubilize 1 mole surfactant, [DOTAC] per mole protein, [BLG] prior to precipitation. The protein-surfactant precipitate complex is neutral and consists of 8 [DOTAC]/[BLG]. The net charge of the protein in water at aqueous pH is −7 and this agrees with the determined composition. The pH is, however, decreased on addition of DOTAC, but this does not seem to affect the composition of the precipitate significantly. The amount of precipitate reaches a maximum at about 8 [DOTAC]/[BLG] and thereafter a plateau region occurs where no more precipitate seems to be formed. On further increasing the surfactant concentration the precipitate redissolves either into a solution phase directly or into a solution phase via a gel phase depending on the protein concentration. On decreasing salt concentration the ternary system shows similar phase behaviour, but the stability of the regions are different. It is also observed that oppositely charged protein-surfactant systems show similar phase behaviour irrespective of nature of the net charge on the protein.     

Complexes of polyelectrolyte-neutral double hydrophilic block copolymers with oppositely charged surfactant and polyelectrolyte

Complexes between sodium (sulfamate-carboxylate)isoprene/ethylene oxide double hydrophilic diblock copolymers (SCIEO) and dodecyltrimethylammonium bromide (DTMAB), as well as quaternized poly(2-vinylpyridine) (QP2VP), were studied in aqueous solutions, at pH 7. The complexes are formed due to electrostatic interactions between the anionic groups of the polyelectrolyte block of the copolymers and the cationic groups of the surfactant or the homopolyelectrolyte. The structure of the complexes was investigated as a function of the mixing ratio of the two components in solution and ionic strength by static, dynamic, and electrophoretic light scattering, atomic force microscopy, and fluorescence spectroscopy. The mass and size of the complexes depend on the mixing ratio between the components. A transition from intrachain to an interchain association was observed for block copolymer/ surfactant complexes. SCIEO/QP2VP complexes were found to respond to increasing concentrations of added salt. Spherical and ellipsoid shaped complexes with a core-shell micellar like structure were formed in the systems studied.     

Fluorescence study of chromophore labeled strong polyelectrolyte bound with oppositely charged surfactant

Four strong polyelectrolyte samples of 2-(acrylamido)-2-methylpropanesulfonic acid (AMPS) and N,N-dimethylacrylamide (DMAA) were radically copolymerized with a single label of naphthalene or pyrene, with both labels and without label, containing about 40 mol % AMPS. Fluorescence nonradiative energy transfer (NRET) I_Py/I_Np, anisotropy r, I₁/I₃ and excimer emission I_E/I_M of pyrene labels were observed in dilute aqueous solutions with and without cationic surfactant of cetyltrimethylammonium bromide (CTAB). The overlap concentration was determined as 3 g/L from the appearance of intermolecular excimer. The variation of intra- and intermolecular NRET with total polyelectrolyte concentration showed that the charged chains preferentially interpenetrated each other rather than reduce their coil volume as their concentration beyond the overlap threshold. By binding with CTAB, the polyelectrolyte chain became more coiled as known from the reduced viscosity. The intramolecular NRET was dominant when [CTAB]Д᎒^-5 M and then the intermolecular NRET occurred at higher CTAB concentrations with hydrophobic aggregation between CTAB tails bound on different polyelectrolyte chains. The CTAB concentration corresponding to the maxima of I_Py/I_Np just is equal to the AMPS monomer concentration, indicating the formation of 1:1 binding between surfactant and polyelectrolyte in very dilute solutions. Added salt of NaCl up to 0.1 M hardly affected the intramolecular NRET but affected the I_Py/I_Np value for the intermolecular NRET.     

Electrostatic self-assembly of neutral and polyelectrolyte block copolymers and oppositely charged surfactant

We investigated the phase behavior and the microscopic structure of the colloidal complexes constituted from neutral/polyelectrolyte diblock copolymers and oppositely charged surfactant by dynamic light scattering (DLS) and small-angle neutron scattering (SANS). The neutral block is poly(N-isopropylacrylamide) (PNIPAM), and the polyelectrolyte block is negatively charged poly(acrylic acid) (PAA). In aqueous solution with neutral pH, PAA behaves as a weak polyelectrolyte, whereas PNIPAM is neutral and in good-solvent condition at ambient temperature, but in poor-solvent condition above approximately 32 degrees C. This block copolymer, PNIPAM-b-PAA with a narrow polydispersity, is studied in aqueous solution with an anionic surfactant, dodecyltrimethylammonium bromide (DTAB). For a low surfactant-to-polymer charge ratio Z lower than the critical value ZC, the colloidal complexes are single DTAB micelles dressed by a few PNIPAM-b-PAA. Above ZC, the colloidal complexes form a core-shell microstructure. The core of the complex consists of densely packed DTA+ micelles, most likely connected between them by PAA blocks. The intermicellar distance of the DTA+ micelles is approximately 39 A, which is independent of the charge ratio Z as well as the temperature. The corona of the complex is constituted from the thermosensitive PNIPAM. At lower temperature the macroscopic phase separation is hindered by the swollen PNIPAM chains. Above the critical temperature TC, the PNIPAM corona collapses leading to hydrophobic aggregates of the colloidal complexes.     

Salt effect on complex formation of neutral/polyelectrolyte block copolymers and oppositely charged surfactants

The salt effect on the complex formation of poly(acrylamide)- block-poly(sodium acrylate) (PAM- b-PAA) as a neutral-anionic block copolymer and dodecyltrimethylammonium bromide (DTAB) as a cationic surfactant at different NaBr concentrations, CNaBr, was investigated by turbidimetric titration, steady-state fluorescence spectroscopy, and dynamic light scattering. At C NaBr < 0.25 M, DTAB molecules may form micelle-like aggregates on PAM- b-PAA chains to form a PAM- b-PAA/DTAB complex above the critical surfactant concentration C critical for the onset of complex formation. In the region of relatively high turbidity, a larger complex is likely to form a core-shell structure, of which the core is a dense and disordered microphase made of surfactant micelles connected by the PAA blocks. The corona was a diffuse shell of PAM chains, and it ensured steric stability. At CNaBr = 0.25 M, a higher electrostatic intermicellar repulsion and intercomplex repulsion induced by a large amount of bound DTAB micelles may lead to a redissolution of large colloidal complexes into intrapolymer complexes. Moreover, a salt-enhancing effect on the complex formation was observed in the PAM- b-PAA/DTAB system; the critical surfactant concentration decreased with increasing salt concentration at CNaBr < 0.10 M. The salt-enhancing effect is due to the larger increase of interaction in comparison to the screening of the interaction.     

Interactions between bottle-brush polyelectrolyte layers: effects of ionic strength and oppositely charged surfactant

Interactions between cationic bottle-brush polyelectrolyte layers adsorbed on mica across salt and oppositely charged surfactant solutions were investigated with the interferometric surface force apparatus, and the results were compared with what is known for similarly charged linear polyelectrolytes. Ellipsometric measurements demonstrated that the bottle-brush polyelectrolytes, which contain 45 units long poly(ethylene oxide) side chains, are more readily desorbed than linear equivalents when the ionic strength of the solution is increased. It is argued that this is due to the steric repulsion between the poly(ethylene oxide) side chains that reduces the surface affinity. The preadsorbed bottle-brush polyelectrolyte layers were also exposed to sodium dodecyl sulfate (SDS) solutions. It was found that the presence of SDS affected the force profiles less than observed for similarly charged linear polyelectrolytes. This observation was attributed to excluded volume constraints imposed by the poly(ethylene oxide) side chains that reduces the accessibility of the charged polyelectrolyte segments and counteracts formation of large aggregates within the layer.     

Adsorption of oppositely charged polyelectrolyte/surfactant complexes at the air/water interface: formation of interfacial gels

The adsorption and complexation of polystyrene sulfonate (a highly charged anionic polyelectrolyte) and dodecyltrimethylammonium bromide (a cationic surfactant) at the air-water interface can lead to interfacial gels that strongly influence foam-film drainage and stability. The formation and characteristics of these gels have been studied by combining surface tension, ellipsometry, and foam-film drainage experiments. Simultaneously, the solution electromotive force is measured and used to track the polymer-surfactant interactions in the bulk solution. We find that surface gelation occurs above the critical aggregation concentration in solution but before bulk precipitation of the polymer-surfactant complexes. Furthermore, we reveal that strong readsorption of polymer-surfactant complexes occurs during the resolubilization of the precipitated complexes at high surfactant concentrations (i.e., >critical micelle concentration). Seemingly overlooked in the past, this readsorption significantly influences the surface rheological properties and foam-film drainage of these systems.     

Clouding: origin of phase separation in oppositely charged polyelectrolyte/surfactant mixed solutions

The phase behavior in the system of cationic modified poly(vinyl alcohol) (CPVA)-sodium dodecylsulfate (SDS)-water has been investigated. Samples were found phase separated near electroneutral mixing at CPVA concentrations < or =6%, while in a medium CPVA concentration of 7-12%, the phase separation disappeared and the system transformed into bluish homogeneous solution. At > or =13% CPVA concentrations, the mixed systems became colorless homogeneous. Preclouding phenomenon was observed in 5-8% CPVA-SDS mixed systems at an electroneutral mixing ratio. The addition of inorganic salts, such as Na2SO4, NaCl, NaBr, and NaSCN, could exclude the bluish and phase separation phenomenon that was found to be caused by the increase of clouding point in these systems. The clouding phenomenon was proven to be the origin of the phase separation in the CPVA-SDS mixed system. The ability for the inorganic salts to increase the clouding point follows the order of the Hofmeister series.     

Collapse of polyelectrolyte networks induced by their interaction with an oppositely charged surfactant. Theory

A very simple theory of swelling and collapse of weakly charged polyelectrolyte networks in the solution of an oppositely charged surfactant has been developed. The following contributions to the free energy were taken into account: free energy of volume interaction and of elastic deformation of the network chains, free energy connected with micelle formation and free energy of translational motion of all mobile ions in the system (translational entropy). Both the cases of a solution of charged surfactant and that of a mixed solution of charged and neutral surfactant components have been taken into account. It has been shown that the behaviour of the network depends on the total surfactant concentration in the system and corresponds to one of the three following regimes: At low concentration, micelles inside the network are not formed and the behaviour of the polymer network is similar to that of a network swelling in the solution of a lowmolecular-weight salt (regime 1). In the second regime, surfactant concentration inside the network exceeds the critical micelle concentration and micelles are formed; in this regime the network collapses because surfactant molecules, aggregated in micelles, cease to create “exerting” osmotic pressure in the network sample. In the third regime, at very high surfactant concentration, formation of additional micelles inside the network ceases, and the network dimensions coincide with those of the corresponding neutral network.     

Preparation of a biodegradable matrix through polyion complex formation by mixing polylactide-based microspheres having oppositely charged surfaces

The aggregation of polyions into microsphere (MS) complexes was studied as a preparative method for the construction of a biodegradable matrix. Aqueous suspensions of polylactide (PLA)-based MSs with positively and negatively charged surfaces, MS(K(3)(4+)-PLA) and MS(E(3)(4-)-PLA), respectively, immediately formed aggregates when mixed. The effects of the stoichiometry of the charged groups on the surfaces of the MSs and the ionic strength of the medium on aggregate formation, as well as the degradation behavior of the polyion complex (PIC) matrix over time, were investigated.     

Salt effect on the interactions between gemini surfactant and oppositely charged polyelectrolyte in aqueous solution

The effect of alkali halides (NaBr, NaCl, KCl) on the interactions between the cationic gemini surfactant hexylene-1,6-bis(dodecyldimethylammonium bromide) (12-6-12) and the anionic polyelectrolyte sodium polyacrylate (NaPAA) in aqueous solution has been investigated by fluorescence emission spectroscopy, UV transmittance, zeta potential, and transmission electron microscopy (TEM). With increased addition of NaBr, a counterbalancing salt effect on the critical aggregation concentration (CAC) is observed. At low concentrations, NaBr facilitates the formation of micelle-like structures between surfactant and polyelectrolyte and results in a smaller CAC. At high concentrations, NaBr screens the electrostatic attraction between surfactant and polyelectrolyte and leads to a larger CAC. Upon the formation of micelle-like structures at high surfactant concentrations, the addition of NaBr is favorable for larger aggregates. The microstructure detected by TEM show that a global structure is generally formed in the presence of NaBr. The interactions also depend on ion species. Compared to NaBr, the addition of NaCl or KCl yields a smaller CAC.     

Study of interaction between two oppositely charged polyelectrolytes and formation of polyelectrolyte complexes

Polyelectrolyte complex formation has been studied between oppositely charged polyelectrolytes, e.g., polyethylene-imine, polymethacrylic acid, and methacrylic acid–methacrylamide copolymer. Formation of complexes could be shown through several experimental techniques, e.g., viscometry, conductometry, potentiometry, and IR spectra. It is suggested that these complexes are perhaps formed as a result of electrostatic cooperative interaction and a “ladder-like” interaction is likely to be more favorable.     

Complexation and coacervation of polyelectrolytes with oppositely charged colloids

Polyelectrolyte-colloid coacervation could be viewed as a sub-category of complex coacervation, but is unique in (1) retaining the structure and properties of the colloid, and (2) reducing the heterogeneity and configurational complexity of polyelectrolyte-polyelectrolyte (PE-PE) systems. Interest in protein-polyelectrolyte coacervates arises from preservation of biofunctionality; in addition, the geometric and charge isotropy of micelles allows for better comparison with theory, taking into account the central role of colloid charge density. In the context of these two systems, we describe critical conditions for complex formation and for coacervation with regard to colloid and polyelectrolyte charge densities, ionic strength, PE molecular weight (MW), and stoichiometry; and effects of temperature and shear, which are unique to the PE-micelle systems. The coacervation process is discussed in terms of theoretical treatments and models, as supported by experimental findings. We point out how soluble aggregates, subject to various equilibria and disproportionation effects, can self-assemble leading to heterogeneity in macroscopically homogeneous coacervates, on multiple length scales.     

Phase coexistence in a polydisperse charged hard-sphere fluid: polymer mean spherical approximation

We have reconsidered the phase behavior of a polydisperse mixture of charged hard spheres (CHSs) introducing the concept of minimal size neutral clusters. We thus take into account ionic association effects observed in charged systems close to the phase boundary where the properties of the system are dominated by the presence of neutral clusters while the amount of free ions or charged clusters is negligible. With this concept we clearly pass beyond the simple level of the mean spherical approximation (MSA) that we have presented in our recent study of a polydisperse mixture of CHS [Yu. V. Kalyuzhnyi, G. Kahl, and P. T. Cummings, J. Chem. Phys. 120, 10133 (2004)]. Restricting ourselves to a 1:1 and possibly size-asymmetric model we treat the resulting polydisperse mixture of neutral, polar dimers within the framework of the polymer MSA, i.e., a concept that--similar as the MSA--readily can be generalized from the case of a mixture with a finite number of components to the polydisperse case: again, the model belongs to the class of truncatable free-energy models so that we can map the formally infinitely many coexistence equations onto a finite set of coupled, nonlinear equations in the generalized moments of the distribution function that characterizes the system. This allows us to determine the full phase diagram (in terms of binodals as well as cloud and shadow curves), we can study fractionation effects on the level of the distribution functions of the coexisting daughter phases, and we propose estimates on how the location of the critical point might vary in a polydisperse mixture with an increasing size asymmetry and polydispersity.     

Mixtures of mucin and oppositely charged surfactant aggregates with varying charge density. Phase behavior, association, and dynamics

The nonionic surfactant Tween80 is a commonly used excipient in drug formulations containing an active substance with low aqueous solubility. Model drug vehicles with varying charge density were obtained by mixing Tween80 (PS-80) with the cationic surfactant Tetradecyltrimethylammonium chloride (TTAC), thus forming mixed micelles. The micelles were mixed with the negatively charged polyelectrolyte mucin, which is a component in the protective mucus layer covering epithelial cell linings. Depending on the composition of the mixture, complex-formation could be followed by precipitation. Using X-ray diffraction, it was found that the precipitate contained a lamellar phase with properties sensitive to the proportion of PS-80. Higher amounts of PS-80 were found to oppose phase separation. Further analysis in the one-phase region, or alternatively of the supernatant of two-phase samples, by (1)H NMR, HPLC, and diffusion measurements with PGSE-NMR led to the conclusions that at low proportion of PS-80 aggregates composed of mixed (PS-80 and TTAC) micelles and mucin were formed, whereas increased concentrations of PS-80 favored the dissolution of the precipitate and limited the interactions between mixed micelles and the polymer.     

Phase behavior and molecular thermodynamics of coacervation in oppositely charged polyelectrolyte/surfactant systems: a cationic polymer JR 400 and anionic surfactant SDS mixture

Coacervation in mixtures of polyelectrolytes and surfactants with opposite charge is common in nature and is also technologically important to consumer health care products. To understand the complexation behavior of these systems better, we combine multiple experimental techniques to systematically study the polymer/surfactant binding interactions and the phase behavior of anionic sodium dodecyl sulfate (SDS) surfactant in cationic JR 400 polymer aqueous solutions. The phase-behavior study resolves a discrepancy in the literature by identifying a metastable phase between the differing redissolution phase boundaries reported in the literature for the surfactant-rich regime. Isothermal titration calorimetry analyzed within the framework of the simple Satake-Yang model identifies binding parameters for the surfactant-lean phase, whereas a calculation for polymer-bound micelles coexisting with free micelles is analyzed in the surfactant-rich redissolution regime. This analysis provides a preliminary understanding of the interactions governing the observed phase behavior. The resulting thermodynamic properties, including binding constants and the molar Gibbs free energies, enthalpies, and entropies, identify the relative importance of both hydrophobic and electrostatic interactions and provide a first approximation for the corresponding microstructures in the different phases. Our study also addresses the stability and metastability of oppositely charged polyelectrolytes and surfactant mixtures.     

Interfacial microgels formed by oppositely charged polyelectrolytes and surfactants. Part 2. Influence of surfactant chain length and surfactant/polymer ratio

The adsorption and complexation of polystyrene sulfonate (a highly charged anionic polyelectrolyte) and a series of cationic surfactants, alkyltrimethylammonium bromide, CnTAB, n = 8-16, at the air-water interface has been studied by combining surface tension and ellipsometry measurements. We find that increasing the chain length of the surfactant from 8 to 10 carbons leads to a sharp increase in adsorption of PSS/CnTAB complexes. When the surfactant tail length is further increased to 12 and 14 carbons, surface adsorption becomes less favored than macroscopic phase separation, resulting in a partial surface depletion. Furthermore, we find that when surface tensions are plotted against surfactant/monomer molar concentration ratio, all data collapse to a single curve. This result shows that the surfactant-polymer molar ratio, s/p, is a key parameter for tuning the surface activity of the complexes formed.     

Gel formation in suspensions of oppositely charged colloids: mechanism and relation to the equilibrium phase diagram

We study gel formation in a mixture of equally-sized oppositely charged colloids both experimentally and by means of computer simulations. Both the experiments and the simulations show that the mechanism by which a gel is formed from a dilute, homogeneous suspension is an interrupted gas-liquid phase separation. Furthermore, we use Brownian dynamics simulations to study the relation between gel formation and the equilibrium phase diagram. We find that, regardless of the interaction range, an interrupted liquid-gas phase separation is observed as the system is quenched into a state point where the gas-liquid separation is metastable. The structure of the gel formed in our experiments compares well with that of a simulated gel, indicating that gravity has only a minor influence on the local structure of this type of gel. This is supported by the experimental evidence that gels squeezed or stretched by gravity have similar structures, as well as by the fact that gels do not collapse as readily as in the case of colloid-polymer mixtures. Finally, we check whether or not crystallites are formed in the gel branches; we find crystalline domains for the longer ranged interactions and for moderate quenches to the metastable gas-liquid spinodal regime.     

Triplet state formation of aromatic hydrocarbons quenched with silver ion in ethanol

Fluorescence quenching rate constants of aromatic hydrocarbons by silver ions are determined. The values obtained are not well interpreted with thermodynamical considerations based on an electron transfer mechanism, but related to the intersystem crossing rate constant of the fluorescer. Triplet state formation in the course of quenching has been confirmed by laser photolysis studies.