Impact of the Pt catalyst on the oxygen electroreduction reaction kinetics on various carbon supports

Micro- and mesoporous carbide-derived carbons synthesized from molybdenum and tungsten carbides were used as porous supports for a platinum catalyst. Synthesized materials were compared with commercial Vulcan XC72R conducting furnace black. The scanning electron microscopy, X-ray diffraction, Raman spectroscopy, high-resolution transmission electron microscopy, and low-temperature N₂ adsorption methods were applied to characterize the structure of catalysts prepared. The kinetics of oxygen electroreduction in 0.5 M H₂SO₄ solution was studied using cyclic voltammetry and rotating disk electrode methods. The synthesized carbide-derived carbons exhibited high specific surface area and narrow pore size distribution. The platinum catalyst was deposited onto the surface of a carbon support in the form of nanoparticles or agglomerates of nanoparticles. Comparison of carbide-derived carbons and Vulcan XC72R as a support showed that the catalysts prepared using carbide-derived carbons are more active towards oxygen electroreduction. It was shown that the structure of the carbon support has a great influence on the activity of the catalyst towards oxygen electroreduction.     

A methodology for investigating new nonprecious metal catalysts for PEM fuel cells

This paper reports an approach to investigate metal-chalcogen materials as catalysts for the oxygen reduction reaction (ORR) in proton exchange membrane (PEM) fuel cells. The methodology is illustrated with reference to Co-Se thin films prepared by magnetron sputtering onto a glassy-carbon substrate. Scanning Auger microscopy (SAM), X-ray photoelectron spectroscopy (XPS), energy-dispersive X-ray spectroscopy (EDX), and X-ray diffraction (XRD) have been used, in parallel with electrochemical activity and stability measurements, to assess how the electrochemical performance relates to chemical composition. It is shown that Co-Se thin films with varying Se are active for oxygen reduction, although the open circuit potential (OCP) is lower than for Pt. A kinetically controlled process is observed in the potential range 0.5-0.7 V (vs reversible hydrogen electrode) for the thin-film catalysts studied. An initial exposure of the thin-film samples to an acid environment served as a pretreatment, which modified surface composition prior to activity measurements with the rotating disk electrode (RDE) method. Based on the SAM characterization before and after electrochemical tests, all surfaces demonstrating activity are dominated by chalcogen. XRD shows that the thin films have nanocrystalline character that is based on a Co(1-x)Se phase. Parallel studies on Co-Se powder supported on XC72R carbon show comparable OCP, Tafel region, and structural phase as for the thin-film model catalysts. A comparison for ORR activity has also been made between this Co-Se powder and a commercial Pt catalyst.     

Electrochemical Properties of Carbon Black AD-100 and AD-100 Promoted with Pyropolymer of Cobalt Tetra(p-methoxyphenyl)porphyrin

Carbon black AD-100: initial, activated, and promoted with pyropolymer of cobalt tetra(p-methoxyphenyl)porphyrin is characterized by a complex of electrochemical (floating electrode, rotating disk electrode, rotating ring-disk electrode, electrochemical impedance) and structural (standard porosimetry, BET) methods of investigation. Procedures for the AD-100 activation and promotion and the preparation of thin layers of the material to be studied and deposited on disk electrodes are described. The effect of the activation and promotion of carbon black on the surface and electrocatalytic activity of materials under study in the reduction of oxygen and hydrogen peroxide is shown. The ratio of constants of oxygen reduction directly to water and through intermediate formation of hydrogen peroxide is determined. A path for the oxygen reduction is discussed.     

A Simple Electrochemical Approach Based on Inexpensive Wall‐Jet Screen‐Printed Ring Disk Electrode to Evaluate Oxygen Reduction Catalysts

A simple electrochemical approach to evaluate oxygen reduction catalysts using an inexpensive screen‐printed ring disk carbon electrode system, consisting of a ring electrode deposited with MnO₂ and a disk electrode modified with the catalysts for study, is developed in this study. The as‐prepared MnO₂ is selective and sensitive for H₂O₂ oxidation in the presence of O₂ and is crucial to the proposed approach. By coupling with a wall‐jet electrochemical cell, the product generated from the reduction reaction at the disk electrode can effectively be monitored at the MnO₂‐deposited ring electrode. Model catalysts of nano‐Au and nano‐Pd representing 2e^? reduction of O₂ to H₂O₂ and 4e^? reduction to H₂O, respectively, were evaluated as electrode materials in oxygen reduction reaction to demonstrate the applicability of the proposed method.     

Azamacrocyclic complexes of Group VIII metals as catalysts for oxygen electroreduction in alkaline solutions

The kinetics of catalytic electroreduction of oxygen in a 1 N KOH solution was studied by the rotating disk electrode (RDE) method. Azamacrocyclic iron and ruthenium complexes of the porphyrin and phtalocyanine series were used as catalysts. The reduction of oxygen was also studied on both the individual complexes and the same complexes supported on carbon supports (XC72R and graphene). The catalytic activity and selectivity of the complex is determined, to a high extent, by the nature and electron-donor properties of the metal atom in the complex and, to a lesser extent, by the structure of the organic ligand.     

Studies of selectivity of oxygen reduction reaction in acidic electrolyte on electrodes modified by products of pyrolysis of polyacrylonitrile and metalloporphyrins

The rotating disk electrode technique was used to study in 0.5 M H₂SO₄ catalytic properties of products of pyrolysis of the metal-free polyacrylonitrile/carbon black composite, polyacrylonitrile/iron/carbon black composite, and also supported pyropolymers of Co(II) tetramethoxyphenyl porphyrine (CoTMPP) and Fe(III) tetramethoxyphenyl porphyrin chloride (FeTMPPCl). It is shown that the metal-free polyacrylonitrile/carbon black composite catalyzes the oxygen reduction reaction via the parallel path. Addition of up to 2% of Fe into the composite results in abrupt growth of the catalytic activity and share of the four-electron reaction, which provides the parallel–serial reaction path. The parallel reaction with no further catalytic conversion of H₂O₂ occurs on catalysts of the CoTMPP/Vulcan XC72 and FeTMPPCl/Vulcan XC72 series. The chemical composition is one of the key factors affecting activity and selectivity of CoTMPP/Vulcan XC72 catalysts. An increase in the precursor content from 5 to 30% is accompanied by an increase in selectivity k₁/k₂ from 0.14–0.30 to 0.5–1.7, where k₁ is the rate constant of the reaction of O₂ reduction to H₂O, k₂ is the rate constant of the reaction of O₂ reduction to H₂O₂.     

Synthesis and study of catalysts of electrochemical oxygen reduction reaction based on polymer complexes of nickel and cobalt with Schiff bases

The article presents the results of studies of new nanosize catalysts of electrochemical oxygen reduction reaction (ORR) obtained using the method of thermal decomposition of polymer complexes of nickel and cobalt with tetradentate (N₂O₂) Schiff bases. The catalysts are characterized using the methods of thermogravimetry, electrochemical quartz microgravimetry, scanning electron microscopy with X-ray microanalysis, XPS. The ORR process on electrodes modified by the above catalysts was studied using the voltammetry and rotating disk electrode techniques. The obtained catalysts manifested high specific activity per initial polymer mass (more than 600 mA/mg).     

The Catalytic Effect of Polypyrrole/Pt‐Cu on Oxygen Reduction Reaction

This paper studies the electrochemical properties of ppy/Pt‐Cu composite for oxygen reduction reaction (ORR) and compares it to the highly porous ppy/Pt‐Cu catalyst, which can be synthesized by galvanostatic method (ppy/Pt‐Cu(GS)). The results of the polarization, rotating disk electrode and electrochemical impedance tests are discussed to determine the electrochemical properties of the catalysts. According to the results, ppy/Pt‐Cu(GS) catalyst is more active toward ORR compared to ppy/Pt‐Cu catalyst. The rotating disk electrode data indicates four‐electron transfer mechanism for this catalyst.     

聚苯胺衍生Fe-N-C催化剂在碱性电解质中对氧还原反应的催化性能

经过热解聚苯胺、碳和FeCl₃的混合物制备的Fe-N-C材料在酸性电解质中对氧还原反应表现出高的催化活性;由于材料中不存在任何贵金属, 因而被认为是一类新型非贵金属氧还原催化剂. 然而这类催化剂在碱性电解质中催化氧还原反应的性能如何尚不清楚. 本文使用旋转圆盘电极技术考察了制备的两个Fe-N-C催化剂在KOH水溶液中催化氧还原反应性能, 发现这两个催化剂表现出比无金属的N掺杂碳材料更高的活性. 与商业Pt/C催化剂相比, 它们催化氧还原反应的起始电势和半波电势分别仅低60和40 mV左右, 计时电流测试表明, 它们比Pt/C催化剂显示出更好的稳定性. 此外, 在这两个Fe-N-C催化剂上的氧还原反应主要遵循四电子途径. 本工作显示, Fe-N-C材料有望用于碱性燃料电池氧还原反应催化剂.     

Nanostructured catalysts for cathodes of oxygen-hydrogen fuel cells

Bimetallic catalysts platinum-cobalt, platinum-chromium, and platinum-tungsten, deposited onto highly dispersed carbon black from complex cluster-type compounds of corresponding metals with a 1: 1 atomic ratio of metals are developed. The catalysts are characterized by methods of x-ray diffraction analysis and energy dispersive analysis of x-rays. The procedure involving use of a thin-film rotating disk electrode is employed to probe kinetic parameters of the oxygen reduction reaction on the catalysts developed. The investigated binary catalysts exhibit specific electrochemical characteristics that are not inferior and, in some cases, are superior to the characteristics intrinsic to the commercial platinum catalyst E-TEK, when tested in the composition of a gas-diffusion electrode under conditions that are close to real conditions in which cathodes of oxygen-hydrogen fuel cells operate.     

玻碳电极上DTAB对氧还原反应的促进作用

用旋转圆盘玻碳电极研究了阳离子表面活性剂十二烷基三甲基溴化铵(DTAB)对氧还原反应的影响. 结果表明, DTAB明显提高了玻碳电极对氧还原的电催化活性. 通过对氧还原电流与旋转速度的关系以及动力学电流与电位的Tafel关系分析, 发现DTAB提高了玻碳电极对氧还原反应电荷传递步骤的传递系数, 因此加快了氧还原的动力学过程.     

硼、氮掺杂的二硫化钼用于氧还原电催化研究

对于碱性燃料电池的阴极反应,开发具有优异催化性能的新型催化剂至关重要.本工作采用一种简单的热解方法合成了硼、氮掺杂的二硫化钼(B,N-MoS2)材料并将其应用于氧还原(ORR)电催化分析.通过循环伏安法(CV)与线性扫描伏安法(LSV)等电化学分析方法,采用旋转盘电极(RDE)与旋转环盘电极(RRDE)等技术测试了该材...     

Oxygen reduction on carbon nanomaterial-modified glassy carbon electrodes in alkaline solution

Electroreduction of oxygen in alkaline solution on glassy carbon (GC) electrodes modified with different carbon nanomaterials has been studied. Electrochemical experiments were carried out in 0.1 M KOH employing the rotating disk electrode and rotating ring-disk electrode methods. The GC disk electrodes were modified with carbon nanomaterials using polytetrafluoroethylene as a binder. Four different carbon nanomaterials were used: multiwalled carbon nanotubes, carbon black powder, and two carbide-derived carbons (CDC). For the first time, the electrocatalytic behavior of CDC materials toward oxygen reduction is explored. Electrochemical characterization of the materials showed that all the carbon nanomaterial-modified GC electrodes are highly active for the reduction of oxygen in alkaline solutions.     

Structural and electrocatalytic features of Pt/C catalysts fabricated in supercritical carbon dioxide

Pt/carbon black samples fabricated from dimethyl (1,5-cyclooctadiene) platinum(II) in supercritical CO₂ are characterized in relation to possible applications in methanol fuel cell. The problem of precise material characterization is addressed in frames of X-ray diffractometry, transmission electron microscopy, and electrochemical techniques of the true surface area determination. The catalysts with Pt loading of 20–40 wt.% consist of nm-size particles, with the lattice defectiveness dependent on the fabrication mode. To check the effect of support, various types of carbon blacks (Vulcan XC72R and acetylene black AC-1) are used. In contrast to commercial HiSpec catalysts, no pronounced increase of particle size with Pt loading is found. Specific steady-state activity towards methanol oxidation appears to be essentially higher than for commercial catalysts, mostly because the self-poisoning effects are less pronounced. As for poisoning of Pt with organic species (resulting from the ligand of precursor), its effects are demonstrated to be minor after CO or methanol adsorption accompanied by desorption of contaminating by-product.     

表面改性炭材料在微生物燃料电池中的应用(英)

研究了在空气阴极微生物燃料电池中修饰方法如硝酸处理和硝酸-氨水酸碱等对XC-72R作为阴极氧还原催化剂催化活性的影响,并且使用傅里叶变换红外光谱(FTIR)、Boehm滴定法和X射线光电子能谱(谱(XPS)等手段对催化剂进行了表征.FTIR测试证明硝酸处理可引入含氧基团氨水处理可引入含氮基团.另外,还测试了含有不同表面官能团的XC-72R对氧还原的活性,并将其作为阴极催化剂用在MFC中,测试了电池性能.实验表明,经酸碱修饰的XC-72R作为空气阴极MFC的催化剂具有很好的应用前景.     

石墨烯载Ir催化剂对氨氧化的电催化性能

用石墨烯(G)代替Vulcan XC-72炭(XC)作Ir的载体制备石墨烯载Ir(Ir/G)催化剂. 电化学的测量结果表明, Ir/G催化剂对氨氧化的电催化性能优于XC炭载Ir(Ir/XC)催化剂. X射线衍射(XRD)谱测量结果表明, Ir/G和Ir/XC催化剂的Ir粒子平均粒径相似. 拉曼光谱的测量结果表明, G的石墨化程度和电导率高于XC. 因此, Ir/G催化剂对氨氧化的电催化性能优于Ir/XC催化剂. 氨在Ir/G催化剂电极上氧化的电流密度与氨浓度呈很好的线性关系曲线, 相关系数R为0.99557. 因此, Ir/G催化剂电极可作为电流型电化学氨传感器的工作电极.     

Oxygen electroreduction on anthraquinone-modified nickel electrodes in alkaline solution

The electrochemical reduction of oxygen has been studied on anthraquinone (AQ) modified nickel electrodes in 0.1 M KOH solution using the rotating disk electrode (RDE) technique. Modification of the Ni electrode surface with AQ by electrochemical reduction of the corresponding diazonium salt was carried out in two different media (in acetonitrile and in aqueous acidic solution). The AQ-modified Ni electrodes showed a good electrocatalytic activity for O₂ reduction. The RDE data indicate that the reduction of oxygen on Ni/AQ electrodes proceeds by a two-electron pathway in alkaline solution. The O₂ reduction results obtained for Ni/AQ electrodes are compared with those of AQ-modified glassy carbon electrodes.     

Comparative characteristics of cathodes with different catalytic systems in hydrogen–oxygen and hydrogen–air fuel cells with proton-conducting polymer electrolyte

The characteristics of low-temperature hydrogen–oxygen (air) fuel cell (FC) with cathodes based on the 50 wt % PtCoCr/C and 40 wt % Pt/CNT catalysts synthesized on XC72 carbon black and carbon nanotubes (CNT) are compared with the characteristics of commercial monoplatinum systems 9100 60 wt % Pt/C and 13100 70% Pt/C HiSPEC. It is shown that the synthesized catalysts exhibit a high mass activity, which is not lower than that of commercial Pt/C catalysts, a high selectivity with respect to the oxygen reduction to water, and a significantly higher stability. The characteristics of PtCoCr/C and Pt/CNT were confirmed by testing in the hydrogen—oxygen FCs. However, when air was used at the cathode, especially in the absence of excessive pressure, a voltage of FC with the cathode based on PtCoCr/XC72 is lower as compared with the commercial systems. Probably, this is associated with the transport limitations in the structure of trimetallic catalyst synthesized on XC72 carbon black due to the absence of mesopores. This drawback was eliminated to a large extent by raising the volume of mesopores as a result of application of mixed support (XC72 + CNT) and the use of only CNT for the synthesis of the monoplatinum catalyst. However, this did not eliminate another drawback, namely, a low platinum utilization coefficient in the cathode active layer as compared with that measured under the model conditions in the 0.5 M Н₂SO₄ solution. Therefore, further research is required to improve the structure of the catalytic systems, which are synthesized both on carbon black and nanotubes, while maintaining their high stability and selectivity.     

Fe-N/C-TsOH催化剂应用碱性介质催化氧还原的电催化活性

通过溶剂分散热处理方法制备了一种吡咯和对甲苯磺酸(TsOH)共同修饰的碳载非贵金属复合催化剂(Fe-N/C-TsOH),并采用扫描电子显微镜(SEM)、X射线衍射(XRD)和X射线光电子能谱(XPS)对催化剂的形貌和组成成分进行表征. 借助循环伏安法(CV)和旋转圆盘技术研究了TsOH对催化剂在0.1 mol·L^-1 KOH介质中催化氧还原性能的影响. 结果表明：TsOH的存在对催化剂催化氧还原反应(ORR)的活性影响很大. 以其制备的气体扩散电极在碱性电解质溶液中催化氧还原过程时转移的电子数为3.899,远比不含TsOH修饰的催化剂催化氧还原的电子数(3.098)高. 此外,研究发现600 ℃热处理过的Fe-N/C-TsOH催化剂表现出最佳的氧还原催化性能. 相比未经热处理过的Fe-N/C-TsOH催化剂,起峰电位和-1.5 mA·cm^-2电流密度对应的电压分别向正方向移动30 和170 mV. XPS研究结果表明吡咯氮是催化剂主要活性中心,提供氧还原活性位,而TsOH加入形成的C―S_n―C和―SO_n―有利于催化剂催化氧还原活性的提高,从而使该催化剂对氧还原表现出很好的电催化性能和选择性.     

Oxygen reduction reaction on carbon-supported palladium nanocubes in alkaline media

Carbon-supported Pd nanocubes with the size of 30, 10 and 7 nm were prepared and their electrocatalytic activity towards the oxygen reduction reaction (ORR) in alkaline solution was studied. For comparison carbon-supported spherical Pd nanoparticles and commercial Pd/C catalyst were used. The catalysts were characterised by transmission electron microscopy, electro-oxidation of carbon monoxide and cyclic voltammetry and the ORR activity was evaluated using the rotating disk electrode method. The ORR on all studied Pd/C catalysts proceeded via four-electron pathway where the rate-limiting step was the transfer of the first electron to O₂ molecule. The specific activity of Pd nanocubes was more than two times higher than that of spherical Pd nanoparticles and increased with increasing the particle size.