Determination of polychlorinated biphenyl compounds in indoor air samples

A simple procedure for the determination of six non-coplanar polychlorinated biphenyls (PCBs) in medium volumes of indoor air is described. Samples are forced at 6 m3/h through a device consisting of a quartz filter connected to the end of a conventional solid-phase extraction cartridge containing 60 mg of functionalized styrene-divinylbenzene. PCBs retained on the sorbent are directly eluted with 2 ml of hexane. Those associated to airborne particulate matter are microwave extracted in 10 min using 15 ml hexane-acetone (1:1). The proposed procedure is favorably compared to the use of polyurethane cylinders for the concentration of PCBs in terms of solvent consumption and rapidity of the desorption step. Furthermore, the functionalized sorbent showed higher breakthrough volumes than Amberlite XAD-2 for PCBs in gas phase. Quantification limits between 2 and 40 pg/m3 were obtained for six PCBs (from di- to heptachlorobiphenyls) using GC-electron-capture detection.     

Pulsed amperometric detection of furan compounds in transformer oil

The failure of high voltage transformers can result in significant cost and supply implications to both power supplier and consumer alike and in extreme cases may result in explosion, serious injury or death. Transformer failure can be predicted by measuring furanics present in the oil, produced by the thermolytic breakdown of cellulosidic insulators. Failing units can have furanic levels of up to 10 μg ml⁻¹. The use of pulsed amperometric detection (PAD) to measure furanics in transformer oils in real time is reported here. Oils were examined by pre-extraction or direct suspension in aqueous measurement solution or by solubilisation and direct PAD measurement in organic solvents. Linear relationships between PAD response and furanic concentration was found for 2-furaldehyde and furfuryl alcohol (F-OH) across the range of 0–10 μg ml⁻¹, with PAD proving most sensitive to the latter compound. PAD was performed directly in the organic phase in t-butanol with 0.1 M tetramethyl ammonium hydroxide, with aged oils containing >2 μg ml⁻¹ of 2-furaldehyde yielding data within close agreement (<9%) of a standard chromatographic method. The simplicity and rapidity of this method offers the power transmission industry a means of monitoring furanic levels in transformers in real time, thereby reducing the risk of uncontrolled transformer failure.     

Analytical methods for the quantification of volatile aromatic compounds

The investigation of odorants is not an easy task, which needs to be undertaken in the context of fit-for-purpose quality systems. To date, great attention has been paid to determination of the volatile fractions of odorants, since they are responsible for the attributes of global flavor [i.e. a combination of olfactory (aroma) and gustatory (taste) sensations produced by chemicals]. This kind of determination can be carried out by analytical techniques [e.g., gas chromatography (GC) combined with mass spectrometry and/or olfactometric GC]. Methods complementary to GC analysis are available, allowing assessment of the olfactory impact by an electronic nose (e-nose) or a panel of selected individuals. Also, we consider some innovative analytical techniques to study the effects of odorants in food during consumption.     

Analytical methods for the determination of common booster biocides in marine samples

Booster biocides are organic compounds that are added to antifouling copper-based paints to improve their efficacy. Due to their widespread use, they are common pollutants of marine ecosystems. Some of these compounds show acute and chronic toxic effects in non-targeted organisms at concentrations as low as ng L⁻¹. The determination of these compounds is therefore important, and for some, which are prioritized in the EU water framework directive, a necessity.     

Quantitative determination of sub-ppb traces of polychlorinated compounds and pesticides in moss samples

Summary Two methods for the determination of organic polychlorinated compounds and pesticides in moss samples are described. The techniques are suited to determine sub-ppb concentrations. Different homogenisation and extraction methods are used followed by column chromatography clean-up. High-resolution gas chromatography combined with electron capture detection or negative-ion chemical ionization mass spectrometry is employed for quantification. Recovery results, blank values and a comparison of both methods are presented. The techniques have been successfully used for the analysis of moss samples collected from Middle Europe to the Subarctic.

---

Quantitative Bestimmung von Sub-ppb-Spuren polychlorierter Verbindungen und Pesticide in Moosproben

Zusammenfassung Zwei Verfahren zur Bestimmung von polychlorierten organischen Verbindungen und Pesticiden in Moos werden beschrieben, die für den ppb-Bereich geeignet sind. Zur Homogenisierung und Extraktion dienen verschiedene Techniken, gefolgt von einem säulen-chromatographischen Clean-up. Zur Bestimmung dient die hochauflösende Gas-Chromatographie in Kombination mit Electron-capture-Detektion oder Massenspektrometrie durch chemische Ionisation mit negativen Ionen. Ein Vergleich beider Methoden wird gegeben sowie Wiederfindungsraten und Blindwerte für die verschiedenen Substanzen. Die Verfahren wurden erfolgreich auf Moosproben angewendet, die aus einem Gebiet von Mitteleuropa bis zur subarktischen Region gesammelt wurden.

     

Analytical methods for the speciation of selenium compounds: a review

Selenium, like sulphur, exists in the environment in several oxidation states and as a variety of inorganic and organic compounds. Dissolved inorganic selenium can be found in natural waters as selenide Se (–II), as colloidal elemental selenium Se (0), as selenite anions HSeO ₃ ^– and SeO ₃ ^2– i.e. Se (+IV) and as the selenate anion (SeO ₄ ^2– ) i.e. Se (+VI). Organic forms of selenium that may be found in organisms, air or in the aqueous environment, are volatile (methylselenides) or non volatile (trimethylselenonium ion, selenoamino acids and their derivatives). Knowledge of the different chemical forms and their environmental and biomedical distribution is important because of the dependence of bioavailability and toxicity on speciation. This paper reviews the different analytical methods used for the speciation of selenium compounds, with special attention to inorganic selenium and organoselenium species.     

Determination of sulfur compounds in hydrotreated transformer base oil by potentiometric titration.

A method was developed to analyze the distribution of sulfur compounds in model sulfur compounds by potentiometric titration, and applied to analyze hydrotreated transformer base oil. Model thioethers were oxidized to corresponding sulfoxides by tetrabutylammonium periodate and sodium metaperiodate, respectively, and the sulfoxides were titrated by perchloric acid titrant in acetic anhydride. The contents of aliphatic thioethers and total thioethers were then determined from that of sulfoxides in solution. The method was applied to determine the organic sulfur compounds in hydrotreated transformer base oil.     

Analysis of polychlorinated dibenzo-p-dioxins, dibenzofurans and dioxin-like polychlorinated biphenyls in vegetable oil samples by gas chromatography-ion trap tandem mass spectrometry

Gas chromatography coupled to ion trap tandem mass spectrometry (CG-MS-MS) has been evaluated for the analysis of polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) and dioxin-like polychlorinated biphenyls (dl-PCBs) in vegetable oil samples containing different concentration levels (0.2-6 pg WHO-TEQ g(-1) for both PCDD/Fs and dl-PCBs) of the 29 toxic congeners of PCDD/F and dioxin-like PCBs. The effect of potential interfering compounds such as polychlorinated naphthalenes (PCNs), polychlorinated biphenyls (PCBs) and polychlorinated diphenylethers (PCDEs) on the quantification of mono-ortho PCBs has been investigated. In addition, the influence of the clean-up procedure on the final determination by CG-MS-MS was studied, showing that the quality of the results depends to a great extent on this analytical step. Quality parameters have been established and good precisions (CV: 3-19%) and low limits of detection for PCDD/Fs (0.04-0.20 pg g(-1) oil) and dl-PCBs (0.08-0.64 pg g(-1) oil) were obtained. The method was validated by a comparison of the CG-MS-MS results with those obtained by GC-HRMS.     

GC FPD method for the simultaneous speciation of butyltin and phenyltin compounds in waters

A method is described for the simultaneous determination of nanogram amounts of mono-, di- and tri-butyltin compounds in water. The procedure is based on the conversion of tin compounds to volatile species by Grignard pentylation and analysis using GC with flame photometric detection (GC FPD). The ionic compounds are extracted from diluted acidified (HBr) aqueous solutions by using a pentane-tropolone solution. The extracted organotin compounds are pentylated by a Grignard reagent and purified on a Fluorisil column before analysis by GC FPD. The detection limits are 20 ng dm^?3 for butyltin compounds and 50 ng dm^?3 for phenyltin compounds. Recoveries from spiking experiments in tap-water and natural seawater matrices, in which no organotin compounds were detected, were greater than 90% for most of the alkyltin compounds.     

Acid extraction treatment of sediment samples for organotin speciation; occurrence of butyltin and phenyltin compounds on the cadiz coast,south-west spain

A method is described for leaching of nanogram amounts of mono-, di and tri-butyltin compounds and mono-, di- and tri-phenyltin compounds from sediments. The procedure is based on soaking the sediments in a water–hydrogen bromide mixture (2:3) with magnetic stirring for 1 h followed by extraction with 0.02% (w/v) tropolone solution in pentane for 2 h. Organotins are determined by GF FPD after clean-up through a Florisil column and derivatization by Grignard pentylation. The method has been applied to the study of water and sediments in different areas of south-west Spain. Predominant species are butyltins, especially tributyltin (TBT), which has high values in waters and sediments of Puerto de Santa Maria and Cadiz Bay, as well as in sediments of the Sancti Petri Channel, which suggests a harmful action on biota. A direct relation has been found beween organotin levels and distance of potential focus determined by boating activities. In addition, the relative occurrence of dibutyltin (DBT) and monobutyltin (MBT) together with TBT has been noted, possibly as a result of a degractation process, and the influence of grain size of sediment and presence of organic matter on organotin accumulation has been studied.     

Comparison of different methods for the determination of volatile organic compounds in water samples

The aim of this work was to compare the characteristics of three methods, membrane inlet mass spectrometry (MIMS), purge-and-trap gas chromatography-mass spectrometry (P&T) and static headspace gas chromatography (HSGC), for the determination of volatile organic compounds in water samples as used in routine analysis. The characteristics examined included linear dynamic ranges, detection limits of selected environmentally hazardous volatile organic compounds (e.g. toluene, benzene and trichloroethene) in water, required analysis time and reproducibility of the analytical methods. The MIMS and P&T methods had the lowest detection limits for all the tested compounds, ranging from 0.1 to 5 mug 1(-1). Linear dynamic ranges using the MIMS method were about four orders of magnitude and using the P&T method about two orders of magnitude. Detection limits of the HSGC method were 10-100 times higher than those of the other two methods, but the linear dynamic ranges were larger, even up to six orders of magnitude. The analysis time per sample was shortest for the MIMS method, from 5 to 10 min, and ranged around from 35 to 45 min for the HSGC and P&T methods. The reproducibilities of the methods were of the same order of magnitude, in the range of 1-13%. Agreement between the analytical results obtained for spiked samples and for environmental water samples by the three different methods was very good.     

Analysis of polychlorinated n-alkanes in environmental samples

Polychlorinated n-alkanes (PCAs), also known as chlorinated paraffins (CPs), are highly complex technical mixtures that contain a huge number of structural isomers, theoretically more than 10,000 diastereomers and enantiomers. As a consequence of their persistence, tendency to bioaccumulation, and widespread and unrestricted use, PCAs have been found in aquatic and terrestrial food webs, even in rural and remote areas. Recently, these compounds have been included in regulatory programs of several international organizations, including the US Environmental Protection Agency and the European Union. Consequently, there is a growing demand for reliable methods with which to analyze PCAs in environmental samples. Here, we review current trends and recent developments in the analysis of PCAs in environmental samples such as air, water, sediment, and biota. Practical aspects of sample preparation, chromatographic separation, and detection are covered, with special emphasis placed on analysis of PCAs using gas chromatography–mass spectrometry. The advantages and limitations of these techniques as well as recent improvements in quantification procedures are discussed.     

Enhanced extraction of polychlorinated organic compounds from soil samples by fluidized-bed extraction (FBE)

Summary The extraction and determination of polychlorinated organic compounds, like hexachlorobenzene, pentachlorobenzene, octachlorostyrene and polychlorinated biphenyls in soils and solid wastes continues to be a subject for study. In this work Soxhlet extraction and a new extraction technique, fluidized-bed extraction, have been compared. The extraction of polychlorinated organic compounds by this technique has been optimized using experiemental design procedures. The variation of the number of extraction cycles, composition of extraction solvent (mixtures ofn-hexane-acetone) and the holding time after reaching the heating temperature were considering as experimental variables to generate a surface response design. Gas chromatography with mass spectrometric detection was used to determine levels of the analytes in the extracts. Extraction and analysis of a certified reference material (BCR CRM 392) showed the applicability of the method.     

Micropore-free surface-activated carbon for the analysis of polychlorinated dibenzo-p-dioxins-dibenzofurans and non-ortho-substituted polychlorinated biphenyls in environmental samples

2,3,7,8-Substituted polychlorinated dibenzo-p-dioxins/polychlorinated dibenzofurans (PCDD/Fs) and non-ortho-substituted polychlorinated biphenyls (PCBs) account for almost all of the total toxic equivalents (TEQ) in environmental samples. Activated carbon columns are used to fractionate the samples for GC-MS analysis or bioassay. Micropore-free surface-activated carbon is highly selective for PCDD/Fs and non-ortho-PCBs and can improve the conventional activated carbon column clean-up. Along with sulfuric acid-coated diatomaceous earth columns, micropore-free surface-activated carbon provides a rapid, robust, and high-throughput sample preparation method for PCDD/Fs and non-ortho-PCBs analysis.     

Two polydimethylsiloxane rod extraction methods for the sensitive determination of phenolic compounds in water samples

Simple, precise, and low‐cost methods for the simultaneous determination of phenolic endocrine disrupting compounds such as bisphenol A, trichlorophenol, pentachlorophenol, 4‐nonylphenol, and 4‐octylphenol in water samples were developed. The Direct, in situ derivatization methods are based on polydimethylsiloxane rod extraction followed by liquid desorption and chromatographic analysis by liquid chromatography and diode array detection. Several parameters affecting the extraction and desorption of the phenolic compounds and their acetylated derivates were studied, as well as the chromatographic and detection conditions. For the direct method, determination coefficients (r²) > 0.990 and LODs in the 0.6–2 μg/L range were obtained for all compounds except bisphenol A (9.5 μg/L). With the derivatization‐based method, based on in situ acetylation, lower limits of detection (0.3–0.9 μg/L) were obtained for all the compounds with r² > 0.988 and RSDs in the 2–9% range. The developed methods were applied to the analysis of spiked water samples obtaining recoveries of between 60.2 and 131.7% for the direct method, and of between 76.6 and 108.2% for the derivatization‐based method. The results demonstrate the feasibility of using these two methods for determining bisphenol A, trichlorophenol, pentachlorophenol, 4‐nonylphenol, and 4‐octylphenol in water.     

Simultaneous determination of butyltin and phenyltin compounds in oysters by capillary gas chromatography

A method is described for the simultaneous determination of butyl- and phenyltin compounds in oyster samples. The organotin compounds were extracted (as chlorides) from oyster homogenates with hydrochloric acid and benzene in the presence of 0.05% tropolone. These compounds were converted into pentyl derivatives with pentyl Grignard reagent and then analysed by capillary gas chromatography with a flame photometric detector equipped with a 393-nm filter. The recoveries of six organotin compounds added to oyster samples ranged from 71 to 74%. The detection limits of butyl- and phenyltin compounds were in the 5-9 pg range as tin. We detected significant amounts of three organotin compounds (di- and tributyltin and triphenyltin) in oyster samples.     

Development and validation of a method for analyzing polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans in sewage sludge samples

Summary A method has been developed for the analysis of polychlorinated dibenzo-p-dioxins (PCDD) and dibenzofurans (PCDF) in sewage sludge samples. It was found that PCDD/F are best Soxhlet extracted from the matrix with toluene for 24h, after having tested other solvents (dichloromethane and hexane/acetone 41/59) and other extraction times. Several clean up steps (sulfuric acid, multilayer silica and Florisl columns) and concentration are required prior to analysis of the extract by high resolution gas chromatography-high resolution mass spectrometry (HRGC-HRMS). The complete procedure has been validated and the accuracy and precision data (repeatability and reproducibility) are given. The method is linear in the range studied and the limit of detection ranges between 0.2 and 2.2 pg g⁻¹ of dry matter for the 2,3,7,8-substituted congeners. Moreover, the suitability of the method has been checked in an international interlaboratory comparison. The successful application of this method to several samples from Catalan and Dutch urban wastewater treatment plants was demonstrated.     

Analytical methods to determine Po and Pb in marine samples

This paper describes the methods of sampling, preconcentration, chemical separation and final count of ²¹⁰Po and ²¹⁰Pb present in different marine matrices to determine their background levels in a marine ecosystem. Complex, time consuming and selective radioanalytical methods have been used to prepare final clear sources for alpha spectrometry and beta count; in fact, gamma spectrometry, a method direct and non destructive, cannot be taken into account because the ²¹⁰Pb activity is very low which does not allow to carry out sufficiently accurate measurements and ²¹⁰Po is not a gamma emitter but it emits only alpha particle at 5.40 MeV. The results of ²¹⁰Po and ²¹⁰Pb activity concentrations obtained in different marine samples collected in the first two campaigns are still very few to discuss about the ²¹⁰Po and ²¹⁰Pb behavior in marine environment.