Electroactive gold nanoparticles protected by 4-ferrocene thiophenol monolayer

Numerous reports have focused on ferrocene-terminated electroactive self-assembled monolayers (SAMs) on a flat Au surface but only a few on ferrocene SAMs on Au colloid. In this paper, we employ 4-ferrocene thiophenol as a novel capping agent to produce electroactive gold nanoparticles in consideration of the peculiar pi-conjugated structure. Transmission electron microscopy shows the narrow-dispersed gold core with an average core diameter of ca. 2.5 nm. UV/vis spectra examine the pi-conjugated structure of 4-ferrocene thiophenol and surface plasmon absorbance of the indicated gold nanoparticles. X-ray photoelectron spectroscopy reveals electronic properties of the Au core and thiol ligands. Electrochemical measurement shows that the oxidation peak current is proportional to the scan rate, indicating the electrode process is controlled by adsorbed layer reaction. The formal potential of the Fc-MPCs is compared with that of free ferrocene in MeCN solution and the Fc-SAMs. The shifts are attributed to the phenyl moiety in the 4-ferrocene thiophenol and dielectric constant of the solvation environment.     

Correlation between catalytic activity and surface ligands of monolayer protected gold nanoparticles

Gold nanoparticles (GNPs) are known to be a very good catalyst. Also, the anchoring of GNPs with stabilizing ligands is essential for surface modification, tuning of size and shapes, and to prevent from aggregation in suspension. But the effect of ligand on the catalytic property of ligand-capped GNP is yet to be explored in detail. In this paper, we perform an in-depth study of effect of ligands on the catalytic activity of monolayer protected GNPs. For this study, a series of different ligand functionalized GNPs in suspension as well as functionalized GNPs' thin film on glass substrate are prepared and used as catalysts in two model reactions, viz. borohydride reduction of 4-nitrophenol and redox reaction between potassium ferricyanide and sodium thiosulfate. The functionalization of GNPs with any ligand reduces its virgin catalytic activity, no matter whether the GNPs are suspended or supported as thin film. An increase in alkyl chain length of alkanethiols and alkylamines ligands and their graft density to the surface of GNP reduces its catalytic activity. Interestingly, the capping of GNPs with 11-mercaptoundecanoic acid and 11-mercaptoundecanol ligands completely destroys its catalytic activity. The effect of anchoring group of ligand molecules on the catalytic activity of ligand-protected GNPs is also discussed.     

Double hydrophilic block copolymer monolayer protected hybrid gold nanoparticles and their shell cross-linking

This paper describes the syntheses of core/shell gold nanoparticles stabilized with a monolayer of double hydrophilic block copolymer and their stimuli responsiveness before and after shell cross-linking. The hybrid nanoparticles consist of gold core, cross-linkable poly(2-(dimethylamino)ethyl methacrylate) (PDMA) inner shell, and poly(ethylene oxide) (PEO) corona. First, diblock copolymer PEO-b-PDMA was prepared via the reversible addition-fragmentation chain transfer (RAFT) technique using a PEO-based macroRAFT agent. The dithioester end group of PEO-b-PDMA diblock copolymer was reduced to a thiol end group. The obtained PEO-b-PDMA-SH was then used to prepare diblock copolymer stabilized gold nanoparticles by the "grafting-to" approach. 1,2-Bis(2-iodoethoxy)ethane (BIEE) was utilized to selectively cross-link the PDMA residues in the inner shell. The stimuli responsiveness and colloidal stability of core/shell gold nanoparticles before and after shell cross-linking were characterized by laser light scattering (LLS), UV-vis transmittance, and transmission electron microscopy (TEM). At pH 9, the average hydrodynamic radius Rh of non-cross-linked hybrid gold nanoparticles starts to increase above 35 degrees C due to the lower critical solution temperature (LCST) phase behavior of the PDMA blocks in the inner shell. In contrast, Rh of the shell cross-linked gold nanoparticles were essentially independent of temperature. Core/shell gold nanoparticles before and after shell cross-linking exhibit reversible swelling on varying the solution pH. Compared to non-cross-linked core/shell gold nanoparticles, shell cross-linking of the hybrid gold nanoparticles leads to permanent core/shell nanostructures with much higher colloidal stability and physically isolates the gold core from the external environment.     

Hexanethiolate monolayer protected 38 gold atom cluster

The nucleation-growth-passivation Brust reaction has been modified so as to enrich the product in useful quantities of a 38-atom gold nanoparticle coated with a hexanethiolate monolayer. Two modifications are described, using -78 degrees C reduction temperature and a hyperexcess of thiol. Compositional evidence is presented that establishes the product as a Au38(C6)24 hexanethiolate monolayer protected cluster (MPC), based on transmission electron microscopy, laser ionization-desorption mass spectrometry, thermogravimetric analysis, and elemental analysis. Reverse phase HPLC confirms the relatively good monodispersity of the MPC products, but high-resolution double-column HPLC reveals that the MPCs are a mixture of closely related but chromatographically distinct products. Voltammetry, low energy spectrophotometry, and spectroelectrochemistry reveal, respectively, a 1.6 eV electrochemical energy gap between the first oxidation and the first reduction, an optical HOMO-LUMO energy absorbance edge at 1.3 eV, and a bleaching of optical absorbance near the 1.3 eV band edge that accompanies electrochemical oxidation of the nanoparticle.     

Reductive desorption of thiolate from monolayer protected gold clusters

The "electrochemical potential window" of monolayer-protected gold cluster (MPC) nanoelectrodes is probed where the electrified liquid-liquid interface is used as the detector. The first observation of the reductive desorption of thiolate at negative MPC core charge is reported.     

Vibrational circular dichroism of N-acetyl-l-cysteine protected gold nanoparticles

Vibrational circular dichroism is used to determine the conformation of a thiol adsorbed on gold nanoparticles.     

Ethylene glycol monolayer protected nanoparticles for eliminating nonspecific binding with biological molecules

The usefulness of the hybrid materials of nanoparticles and biological molecules in many occasions depends on how well one can achieve a rational design based on specific binding and programmable assembly. Nonspecific binding between nanoparticles and biomolecules is one of the major barriers for achieving its utilities in a biological system. In this paper, we demonstrate a new approach to eliminate nonspecific interactions between nanoparticles and proteins by synthesizing ethylene glycol protected gold nanoparticles. We discovered that with the water content optimized in the range of 9-18% in the reaction mixture, di-, tri-, and tetra(ethylene glycol) protected gold nanoparticles Au-S-EGn (n = 2, 3, and 4) could be directly synthesized. These gold nanoparticles that are bonded with a uniform monolayer with defined length varying from 0.8 to 1.6 nm (from molecular modeling) have great stability in aqueous solutions with a high concentration of electrolyte and organic solutions. Using ion-exchange chromatography and gel electrophoresis, we demonstrated that these Au-S-EGn (n = 2, 3, or 4) nanoparticles have complete resistance to protein nonspecific interactions. These types of nanoparticles provide a fundamental starting material for designing hybrid materials composed of metallic nanoparticles and biomolecules.     

Water-soluble gold nanoparticles protected by fluorinated amphiphilic thiolates

The preparation and the properties of gold nanoparticles (Au NPs) protected by perfluorinated amphiphiles are described. The thiols were devised to form a perfluorinated region close to the gold surface and to have a hydrophilic portion in contact with the bulk solvent to impart solubility in water. The monolayer protected clusters were prepared, in an homogeneous phase using sodium thiolates because of the low nucleophilicity of the alpha-perfluorinated thiols, and fully characterized with (1)H, (19)F NMR spectrometry, IR and UV-vis absorption spectroscopies, transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and X-ray photoelectron spectroscopy (XPS). Au NPs with core diameters ranging from 1.6 to 2.9 nm, depending on the reaction conditions, were obtained. Water-soluble NPs (MPC-F8-PEGs) were obtained with the thiol HS-F8-PEG ending with a short poly(ethylene glycol) unit (PEG-OMe 550), whereas thiols with shorter PEG chains give rise to NPs insoluble in water. MPC-F8-PEGs undergo an exchange reaction with amphiphilic alkyl thiols. ESR investigations, using a hydrophobic radical probe, indicate that the MPC-F8-PEG monolayer shows a greater hydrophobicity compared to the analogous hydrogenated monolayer.     

Structural and theoretical basis for ligand exchange on thiolate monolayer protected gold nanoclusters

Ligand exchange reactions are widely used for imparting new functionality on or integrating nanoparticles into devices. Thiolate-for-thiolate ligand exchange in monolayer protected gold nanoclusters has been used for over a decade; however, a firm structural basis of this reaction has been lacking. Herein, we present the first single-crystal X-ray structure of a partially exchanged Au(102)(p-MBA)(40)(p-BBT)(4) (p-MBA = para-mercaptobenzoic acid, p-BBT = para-bromobenzene thiol) with p-BBT as the incoming ligand. The crystal structure shows that 2 of the 22 symmetry-unique p-MBA ligand sites are partially exchanged to p-BBT under the initial fast kinetics in a 5 min timescale exchange reaction. Each of these ligand-binding sites is bonded to a different solvent-exposed Au atom, suggesting an associative mechanism for the initial ligand exchange. Density functional theory calculations modeling both thiol and thiolate incoming ligands postulate a mechanistic pathway for thiol-based ligand exchange. The discrete modification of a small set of ligand binding sites suggests Au(102)(p-MBA)(44) as a powerful platform for surface chemical engineering.     

Mixed monolayer coverage on gold nanoparticles for interfacial stabilization of immiscible fluids

Gold nanoparticles covered with a mixed monolayer of n-dodecanethiol and 11-mercapto-1-undecanol were prepared and found to mediate the oil-water interface, providing access to stable water droplets in oil.     

Thioalkylated tetraethylene glycol: a new ligand for water soluble monolayer protected gold clusters

Ligand-stabilised, water-soluble gold nanoparticles of two different size ranges (2-4 and 5-8 nm) are readily prepared using monohydroxy (1-mercaptoundec-11-yl) tetraethylene glycol as a novel capping agent. These nanoparticles are as stable as alkylthiol-capped monolayer protected clusters (MPCs) and do not aggregate from aqueous solution under a wide range of stringent conditions. It is expected that this new material will be useful for a number of bio-analytical applications.     

Formation of negative oxidation states of platinum and gold in redox ionic liquid: Electrochemical evidence

The electrochemical reduction of noble metal electrodes in the presence of redox ionic liquid, 1-ferrocenylethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [FcEMIM][TFSI], was investigated by cyclic voltammetry. Our experiments suggest the formation of metal with negative oxidation states, in the cases of platinum and gold electrodes [M_n⁻, FcEMIM⁺]. By analogy with the previous work, the formation of these phases is concomitant with the insertion of the supporting electrolyte; which correspond in our experimental condition to the redox cation of the ionic liquid. As an exciting result, the electrochemical investigations of the reduced electrode in electrolytic solution, containing solvent and supporting electrolyte, evidence the presence of the ferrocene groups at the electrode surface. Moreover, the reduced electrode exhibits the presence of the ferrocene even after, contact with air, after ultrasound, and after physical polishing, highlighting the large stability of this organo-metallic phases formed in this media. The AFM investigations demonstrate the morphological change of the platinum surface after the reduction process. Finally, our works bring a formal electrochemical proof of the presence of the ionic liquid cation inside the electrode material after the cathodic treatment in this media.     

Catalysis by supported gold: correlation between catalytic activity for CO oxidation and oxidation states of gold

X-ray absorption near-edge spectra and temperature-programmed oxidation and reduction data demonstrate that Au(I) and Au(0) are both present in working MgO-supported gold catalysts for CO oxidation. EXAFS data indicate gold clusters with essentially the same average diameter (about 30 A) in each catalyst sample. Thus, the results provide no evidence of an effect of gold cluster size on the catalytic activity, but both the catalytic activity and the surface concentration of Au(I) were found to decrease with increasing CO partial pressure (as Au(0) was increasingly formed), demonstrating that the catalytic sites incorporate Au(I).     

Electrochemical detection of kinase-catalyzed thiophosphorylation using gold nanoparticles

An electrochemical biosensor for kinase-catalyzed reactions is coupled with the thiophosphorylation of the substrate peptide using adenosine 5'-[gamma-thio] triphosphate (ATP-S) as the co-substrate.     

Preparation temperature dependence of size and polydispersity of alkylthiol monolayer protected gold clusters

The influence of preparation temperature on the size and size distribution of dodecylthiol monolayer protected gold clusters was studied. The monolayer protected clusters (MPCs) were synthesized by two different variations of the Brust-Schiffrin procedure. In all of the experiments, the stoichiometry of the reactants dodecylthiol, HAuCl(4), and sodium borohydride was kept constant, while the temperature was varied in the range of -18 to +90 degrees C. Two series were performed in which an aqueous solution of NaBH(4) was either added over 30 s or all in one portion. The size and size distribution of the MPCs were determined by small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM). It has been demonstrated that in general the MPC size increases with elevated preparation temperatures.     

Electrochemical properties of a gold electrode modified with a mixed monolayer

The electrochemical properties of a gold electrode modified with a mixed thiol monolayer containing both a polar and a non-polar head group have been investigated in aqueous Fe(CN)₆⁴⁻, flavin adenine dinucleotide (FAD) and ubiquinone-0 (2,3-dimethoxy-5-methyl-1,4-benzoquinone, UQ₀) solutions. The cyclic voltammetric current-potential (i-E) response of Fe(CN)₆⁴⁻ was found to be affected considerably by the polarity of the head group contained in the mixed monolayer assembly, as compared with those of FAD and UQ₀. It was also found that in the cases of UQ₀ and FAD the i-E responses for the modified electrode were affected by their own molecular size rather than the polarity of the mixed monolayer head group. Furthermore, compared with Fe(CN)₆⁴⁻ ion, these biologically related molecules are able to permeate readily into the well-organized and hydrophobic alkyl chains of the monolayer assembly. The voltammetric profile of UQ₀ was improved by the modification of aminoethanethiol, as compared with those of bare gold and the electrode modified with other polar thiols. Further, two different permeation paths of the electrode species into the mixed monolayer are suggested from the variation of the i-E response with the cycle of the potential scan.     

High catalytic activity for CO oxidation of gold nanoparticles confined in acidic support Al-SBA-15 at low temperatures

While there is a large number of recent studies of Au nanocatalysts supported on metal oxides, low-temperature CO oxidation under an acidic environment has not yet been accomplished. Over a novel acidic Al-SBA-15 support, uniformly distributed gold nanoparticles with sizes approximately 2.7 nm were obtained by a successive procedure of aminosilane grafting, gold adsorption-reduction, and then high-temperature hydrogen treatment. The catalyst system, Au@Al-SBA-15, exhibits extraordinarily high activity for CO oxidation at 80 degrees C. By varying the Si/Al ratio of the support, the dependence of the catalytic activity on the support Si/Al ratio was found in the CO oxidation reaction.     

Theoretical study of sulfur L-edge XANES of thiol protected gold nanoparticles

The Scalar Relativistic-Zero Order Regular Approximation-Time Dependent Density Functional Theory has been employed to study the sulfur L-edge XANES spectrum of the [Au(25)(SCH(3))(18)](+) model cluster, with the aim to reproduce and rationalize previous experimental data. The salient experimental features are properly described by the present calculation. The model cluster contains two different types of bidentate "staple" ligand thiol fragments, and it has been possible to assign the spectral features according to the different location of the initial core orbital on one of the two different fragments. This finding suggests that in the real nanoparticle two different non-equivalent type of sulfur bidentate ligands are present, arranged with the typical staple geometry.     

Synthesis and catalytic properties of soluble platinum nanoparticles protected by a thiol monolayer

Several new platinum monolayer protected clusters (MPCs) have been synthesized and characterized. Two methods of platinum reduction were used depending on the solubility of the thiol: sodium borohydride for the water-soluble thiols and lithium triethylborohydride for the organic soluble thiols. In general, reactant solutions containing a 1:1 thiol/Pt ratio yielded the best particles in a single-phase reaction. Higher thiol/Pt ratios produced lower yields of MPCs, while much lower ratios produced gray-black precipitates. The Pt MPCs were used as catalysts to hydrogenate allyl alcohol to propanol by reducing the carbon-carbon double bond. The Pt-mercaptoammonium MPCs were also used as catalysts in the hydrogenation of maleic acid to succinic acid. Differences in the catalytic hydrogenation rates among the various monolayer coatings for MPCs are attributed to the variations in ligand chain length, branching, charged functional groups, packing density, and core size.