Helium entry and escape through a chemically opened window in a fullerene

(3)He has been inserted into the cavity of an open-cage fullerene derivative close to room temperature, reaching an incorporation fraction of 0.1%. The rate of escape of (3)He from this fullerene was monitored by (3)He NMR to yield the activation barrier and to compare the size of the orifice to those of other open-cage fullerenes. The equilibrium constant was also measured.     

Preparation and properties of a fullerene/polysiloxane hybrid from chemically modified fullerene and polymethoxysiloxane

An organic–inorganic hybrid was prepared by simply mixing a fullerene derivative with polymethoxysiloxane. First, C₆₀ was subjected to a radical addition reaction with 4,4′-azobis(4-cyanovaleric acid) to provide a C₆₀ derivative. Polymethoxysiloxane was prepared by a controlled hydrolytic condensation of tetramethoxysilane. These two compounds were mixed and heated to provide hybrid bulk body. The hybrid bulk body showed high mechanical strength and elastic modulus compared with polymethoxysiloxane or the C₆₀/polymethoxysiloxane hybrid. The formation of a dense siloxane network was established by a homogeneous mixing of the C₆₀ derivative with polymethoxysiloxane.     

A bowl-shaped fullerene encapsulates a water into the cage

The sequential carbon-carbon bond cleaving reactions of the diketone derivative of C60 with o-phenylenediamine give a novel bowl-shaped fullerene bearing a 20-membered ring orifice. The product reversibly encapsulates a water molecule into the fullerene cage for the first time.     

Interaction in fullerene—ammonia system at 423—773 K

The interaction of C₆₀ fullerite and C₆₀—NH₄Cl mixture (8 wt. % of NH₄Cl, promoter of reaction) with ammonia was investigated at a starting NH₃ pressure of 0.6—0.7 MPa in the temperature range 423—773 K. Raising the temperature to 723 K is accompanied by hydrogenation and nitrogenation of the C₆₀ matrix. Treatment of fullerite with ammonia at 773 K is followed by the decomposition of the fullerene framework and formation of X-ray amorphous product. The physico-chemical properties of hydride-nitride phases formed during the interaction were investigated. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 217—219, February, 2006.     

Electrochemical conversion of dinitrogen to ammonia mediated by a complex of fullerene C60 and gamma-cyclodextrin

We report on an electrochemical conversion of N2 to NH3 at ambient pressure and 60 degrees C, which is mediated by reduced C(60) inside the molecular cavity of gamma-cyclodextrin.     

Di-lanthanide encapsulated into large fullerene C100: a DFT survey

Quantum chemical calculations combined with statistical thermodynamic computations expose the electronic structure and high thermodynamic stability of Dy(2)@C(100), a D(5)-symmetric endohedral metallofullerene.     

Putting the chemistry back into analytical chemistry

Aspects of the current status of and research in analytical chemistry are briefly discussed and the need for cost effective analytical procedures is emphasized. The present and future of a number of aspects of flow-injection analysis are considered. These include the basic theory, the kinetic features, the control features, time-based methodology, and the coupling of sample pretreatment with instrumentation. Several aspects of this latter topic are considered with particular reference to the flow-injection atomic spectrometry combination. Problems of kinetic mismatch between chemistry, manifold residence, and instrument operation are discussed and some possible solutions proposed including the use of closed loop manifolds.     

Amination of [60]fullerene by ammonia and by primary and secondary aliphatic amines--preparation of amino[60]fullerene peroxides

Ammonia and aliphatic amines react readily in the oxygen-rich regions of the Cs symmetric fullerene peroxides C60(O)(OOtBu)4 (1) and C60(OH)(Br)(OOtBu)4 (2 c). Michael addition-type hydroamination of the 1,4-diene moiety on the central skew-pentagon was observed when 1 was treated with ammonia or with nonbulky primary amines, while sterically demanding primary amines opened the epoxy moiety to form vicinal aminohydroxy fullerene compounds with the amino group on the central pentagon. In 2 c the bromo group was replaced under similar conditions by ammonia and primary amines. Cyclic secondary amines showed different reaction patterns, forming hydrogenation products or aminoketal-fullerenes when treated with 1 and 2 c, respectively. Single-electron transfer (SET) is the key step in all the proposed mechanisms. The compounds were characterized by their spectroscopic data, and in addition, three single-crystal X-ray structures were obtained.     

Incorporation of fullerene derivatives into smectite clays: a new family of organic-inorganic nanocomposites

Three fulleropyrrolidine derivatives, characterized by the presence of positive charges, were introduced in the interlayer space of montmorillonite. The composites were characterized by powder X-ray diffraction and differential thermal and thermogravimetric (DTA-TGA) analysis, in conjunction with FTIR, UV-Vis, Raman, and (57)Fe-M?ssbauer spectroscopies. Organophilic derivatives were intercalated into organically modified clays, while water-soluble fulleropyrrolidines were introduced into the clay galleries through ion exchange. The experiments, complemented by computer simulations, show that not all the clay-clay platelets are intercalated by the fullerene derivatives and that a sizable amount of charge transfer takes place between the host and the guests.     

Octupole-like supramolecular aggregates of conical iron fullerene complexes into a three-dimensional liquid crystalline lattice

The installation of three structural features into a fullerene molecule, a conical shape, a polar iron-ferrocene complex, and long alkyl chains, allowed dipolar molecules 1 and 2 to undergo microphase separation and to form a three-dimensional lattice in a crystalline and a thermotropic liquid crystalline phase. The key feature is a tetrameric octupole-like aggregate, in which four dipoles are arranged supramolecularly to cancel the molecular polarity, forming a sphere. In addition to this lattice formation mechanism, the molecules incorporate noteworthy features, such as redox active C(60)/ferrocene and luminescent cyclophenacene.     

Arraying of intact liposomes into chemically functionalized microwells

Here, we describe a protocol to bind individual, intact phospholipid bilayer liposomes, which are on the order of 1 microm in diameter, in microwells etched in a regular array on a silicon oxide substrate. The diameter of the wells is on the order of the liposome diameter, so only one liposome is located in each well. The background of the silicon oxide surface is functionalized with a PEG oligomer using the contact printing of a PEG silane to present a surface that resists the adsorption of proteins, lipid material, and liposomes. The interiors of the wells are functionalized with an aminosilane to facilitate the conjugation of biotin, which is then bound to Neutravidin. The avidin-coated well interiors bind the liposomes whose surfaces contain biotinylated lipids. The specific binding of the liposomes to the surface using the biotin-avidin linkage, together with the resistant nature of the background and the physical confinement of the wells, allows the liposomes to remain intact and to not unravel, rupture, and fuse onto the surface. We demonstrate this intact arraying using confocal laser scanning microscopy of fluorophores specifically tagging the microwells, the lipid bilayer, and the aqueous interior of the liposome.     

Lithium insertion into chemically etched multi-walled carbon nanotubes

Lithium insertion (deinsertion) into (from) chemically etched multi-walled carbon nanotubes (c-MWNTs) has been investigated using various electrochemical techniques such as chronopotentiometry, chronoamperometry, and electrochemical impedance spectroscopy. The results indicate that not only the reversible capacity but also the rate capability was improved by a chemical etching (shortening) of the nanotubes. The observed enhancement in capability at high-rate lithium insertion/deinsertion is attributed to the increased electrochemically active area and reduced lithium diffusion length along the nanotubes, resulting from the structural defects and open ends of the c-MWNTs.     

在化学教育中实施环境教育的方法研究

在化学教育中实施环境教育的方法极为重要。本文从化学课内和课外教育的角度,较系统地阐述了课堂渗透法、课程调整法、考察活动和现代电教等方法在环境教育中的运用,为各级各类学校化学课程体系改革提供了具有一定参考价值的材料。     

Synthesis and incorporation into DNA of a chemically stable, functional abasic site analogue

[reaction: see text] The abasic site building block 7 for DNA synthesis, containing a methylenephosphinic acid group at C3', was prepared in six steps and was incorporated into DNA via a combination of H-phosphonate and phosphoramidite chemistry. Corresponding oligodeoxynucleotides were shown to be chemically stable under basic conditions and fully functional at the respective hemiacetal center.     

Synthesis of a short-chain fullerene dimer

The synthesis of a short-chain fullerene dimer via bifunctional cycloaddition is demonstrated. A mono-functionalised C₆₀ species is isolated, and has the potential for further organic functionalisation.     

Thermodynamic Insight into the Origin of a Calix[n]arene-[60]fullerene Interaction and its Application to a Porphyrin-[60]fullerene Energy Transfer System

The calixarene-fullerene interaction,which causes only a slight change in the absorptionspectra, has been substantiated by calorimetricmeasurements: the H° values arecomparable with those obtained from the associationconstants estimated by a spectroscopic method. Furthermore, we determined the association constantbetween homooxacalix[3]arene and [60]fullerenederivatives with a porphyrin moiety by fluorescencespectra.     

Solubilization of fullerene into water with fluoroalkyl end-capped amphiphilic oligomers-novel fluorescence properties

Solubilization of fullerene into water was studied by the use of fluoroalkyl end-capped acryloylmorpholine oligomers, N,N-dimethylacrylamide oligomers, and acrylic acid oligomers. In these fluorinated oligomers, fluoroalkyl end-capped acryloylmorpholine oligomers were more effective in solubilizing fullerene into water. Interestingly, the aqueous solutions of fullerene were applicable to fluorescence analyses.     

Production of monoclonal antibodies against fullerene C60 and development of a fullerene enzyme immunoassay

The aim of the present study was to produce monoclonal anti-fullerene C(60) antibodies and to develop the enzyme immunoassay for the detection in the first use of free fullerene C(60) both in solutions and in multicomponent biological probes. The immunization of mice with the conjugate of fullerene C(60) carboxylic derivative with thyroglobulin synthesized by carbodiimide activation led to the production of eight clones of anti-fullerene antibodies. The specificity of the antibody-fullerene binding was confirmed. Indirect competitive enzyme-linked immunosorbent assay (ELISA) was developed for the determination of water-soluble protein-conjugated fullerene, the fullerene aminocaproic acid, fullerenol and for pristine fullerene in solution. To solubilize extremely hydrophobic free fullerene C(60) a specially selected water-organic mixture compatible with immunoassay was proposed. The detection limit of free fullerene C(60) in solution was 2 μg L(-1). Fullerene C(60) was also detected by ELISA in organ homogenates of rats intraperitoneally or intragastrically administered with fullerene. To reduce the influence of biomatrices on the assay results a technique was developed for the biological sample pretreatment by the extraction of C(60) from bioprobe by toluene followed by the evaporation of toluene and dissolution of the fullerene-containing extract in the selected water-organic media. The ELISA procedure in the first use allowed the detection of fullerene C(60) in different tissues.     

Formation of a regular fullerene nanochain lattice

A vicinal Au(11 12 12) surface, naturally patterned into a rectangular superlattice, has been used as a template to prepare C60 nanostructures with long-range order and uniform size. At a coverage of 0.1 monolayer and at room temperature, a two-dimensional long-range ordered superlattice of molecular nanochains is achieved, which perfectly replicates the periodicity of the template surface. The fullerene nanochains are found to be located exclusively on the face-centered cubic stacking domains at the lower step edges. Our experiments demonstrate that highly periodic molecular nanochains can be fabricated through a site-selective anchoring method.