A selective synthesis of hydroxyborate anions as novel anchors for zirconocene catalysts

A new family of hydroxytris(pentafluorophenyl)borate anions [B(C6F5)3OH](-) associated with organic and aprotic cations c+ (imidazolium, pyrrolidinium and phosphonium) has been prepared by a general one-pot synthesis that implies the chloride borate analogues [B(C6F5)3Cl](-)[c]+. The [c]+[B(C6F5)3OH](-) salts have been isolated and fully characterized. The borate anion [B(C6F5)3OH](-) has been shown to protonate the Zr-Me bond in the Cp2ZrMe2 complex forming CH4 and the first published example of anionic [Cp2Zr(Me)OB(C6F5)3](-) species. Standard spectroscopic methods demonstrate the covalent character of the Zr metal center and the anionic character of the boron atom. This protonolysis methodology using [B(C6F5)3OH](-) anion affords a new route for the incorporation of a covalently bonded anionic functionality on organometallic complexes. This provides a new way to immobilize transition metal complexes in ionic liquids.     

Regioselective coupling of pentafluorophenyl substituted alkynes: mechanistic insight into the zirconocene coupling of alkynes and a facile route to conjugated polymers bearing electron-withdrawing pentafluorophenyl substituents

The reaction of Cp(2)ZrCl(2) with 2 equiv of BuLi at -78 degrees C, followed by the addition of an unsymmetrical tetra- or pentafluorophenyl substituted alkyne R(1)C[triple bond]CAr(f) (R(1), Ar(f) = (CH(2))(4)Me, p-C(6)F(4)H; Me, p-C(6)F(4)H; Ph, C(6)F(5)), resulted in regioselective couplings of these alkynes to zirconacyclopentadienes in which the Ar(f) substituents preferentially adopt the 3,4-positions (beta beta) of the zirconacyclopentadiene ring. With Cp(2)Zr(py)(Me(3)SiC[triple bond]CSiMe(3)) as the zirconocene reagent, the couplings could be carried out at room temperature; however, at higher temperatures significant quantities of the 2,4-fluoroaryl substituted (alpha beta) isomers were also formed. None of the conditions employed produced the 2,5-fluoroaryl substituted (alpha alpha) isomers. These fluoroaryl-substituted zirconacyclopentadienes were readily converted to butadienes via reactions with acids. The zirconacyclopentadiene Cp(2)ZrC(4)-2,5-Ph(2)-3,4-(C(6)F(5))(2), which resulted from the coupling of PhC[triple bond]C(C(6)F(5)), was converted to the corresponding thiophene by reaction with S(2)Cl(2), and to an arene by reaction with MeO(2)CC[triple bond]CCO(2)Me/CuCl. Mechanistic studies on zirconocene couplings of (p-CF(3)C(6)H(4))C[triple bond]C(p-MeC(6)H(4)) indicate that the observed regioselectivities are determined by an electronic factor that controls the orientation of at least one of the two alkynes as they are coupled. Additionally, these studies suggest an unsymmetrical transition state for the zirconocene coupling of alkynes, and this is supported by DFT calculations. The reaction of [(C(6)F(5))C[triple bond]CCH(2)](2)CH(2) with Cp(2)Zr(py)(Me(3)SiC[triple bond]CSiMe(3)) resulted in a zirconacyclopentadiene in which the pentafluorophenyl substituents have been forced into the 2,5-positions (alpha alpha). Zirconocene coupling of the diyne (C(6)F(5))C[triple bond]C-1,4-C(6)H(4)-C[triple bond]C(C(6)F(5)) provided a route to conjugated polymers bearing electron-withdrawing pentafluorophenyl groups.     

Synthesis, structure, and reactivity of 13-vertex carboranes and 14-vertex metallacarboranes

Syntheses, properties, and synthetic applications of 13-vertex closo- and nido-carboranes are reported. Reactions of the nido-carborane salt [(CH2)3C2B10H10]Na2 with dihaloborane reagents afforded 13-vertex closo-carboranes 1,2-(CH2)3-3-R-1,2-C2B11H10 (R = H (2), Ph (3), Z-EtCH=C(Et) (4), E-(t)BuCH=CH (5)). Treatment of the arachno-carborane salt [(CH2)3C2B10H10]Li4 with HBBr2.SMe2 gave both the 13-vertex carborane 2 and a 14-vertex closo-carborane (CH2)3C2B12H12 (8). On the other hand, the reaction of [C6H4(CH2)2C2B10H10]Li4 with HBBr2.SMe2 generated only a 13-vertex closo-carborane 1,2-C6H4(CH2)2-1,2-C2B11H11 (9). Electrophilic substitution reactions of 2 with excess MeI, Br2, or I2 in the presence of a catalytic amount of AlCl3 produced the hexa-substituted 13-vertex carboranes 8,9,10,11,12,13-X6-1,2-(CH2)3-1,2-C2B11H5 (X = Me (10), Br (11), I (12)). The halogenated products 11 and 12 displayed unexpected instability toward moisture. The 13-vertex closo-carboranes were readily reduced by groups 1 and 2 metals. Accordingly, several 13-vertex nido-carborane dianionic salts [nido-1,2-(CH2)3-1,2-C2B11H11][Li2(DME)2(THF)2] (13), [[nido-1,2-(CH2)3-1,2-C2B11H11][Na2(THF)4]]n (13a), [[nido-1,2-(CH2)3-3-Ph-1,2-C2B11H10][Na2(THF)4]]n (14), [[nido-1,2-C6H4(CH2)2-1,2-C2B11H11][Na2(THF)4]]n (15), and [nido-1,2-(CH2)3-1,2-C2B11H11][M(THF)5] (M = Mg (16), Ca (17)) were prepared in good yields. These carbon-atom-adjacent nido-carboranes were not further reduced to the corresponding arachno species by lithium metal. On the other hand, like other nido-carborane dianions, they were useful synthons for the production of super-carboranes and supra-icosahedral metallacarboranes. Interactions of 13a with HBBr2.SMe2, (dppe)NiCl2, and (dppen)NiCl2 gave the 14-vertex carborane 8 and nickelacarboranes [eta5-(CH2)3C2B11H11]Ni(dppe) (18) and [eta5-(CH2)3C2B11H11]Ni(dppen) (19), respectively. All complexes were fully characterized by various spectroscopic techniques and elemental analyses. Some were further confirmed by single-crystal X-ray diffraction studies.     

Ionic-liquid-promoted decaborane dehydrogenative alkyne-insertion reactions: a new route to o-carboranes

Unlike in conventional organic solvents, where Lewis base catalysts are required, decaborane dehydrogenative alkyne-insertion reactions proceed rapidly in biphasic ionic-liquid/toluene mixtures with a wide variety of terminal and internal alkynes, thus providing efficient, one-step routes to functional o-carborane 1-R-1,2-C2B10H11 and 1-R-2-R'-1,2-C2B10H10 derivatives, including R = C6H5- (1), C6H13- (2), HC[triple bond]C-(CH2)5- (3), (1-C2B10H11)-(CH2)5- (4), CH3CH2C(O)OCH2- (5), (C2H5)2NCH2- (6), NC-(CH2)3- (7), 3-HC[triple bond]C-C6H4- (8), (1-C2B10H11)-1,3-C6H4- (9), HC[triple bond]C-CH2-O-CH2- (10); R,R' = C2H5- (11); R = HOCH2-, R' = CH3- (12); R = BrCH2-; R' = CH3- (13); R = H2C=C(CH3)-, R' = C2H5- (14). The best results were obtained from reactions with only catalytic amounts of bmimCl (1-butyl-3-methylimidazolium chloride), where in many cases reaction times of less than 20 min were required. The experimental data for these reactions, the results observed for the reactions of B10H13(-) salts with alkynes, and the computational studies reported in the third paper in this series all support a reaction sequence involving (1) the initial ionic liquid promoted formation of the B10H13(-) anion, (2) addition of B10H13(-) to the alkyne to form an arachno-R,R'-C2B10H13(-) anion, and (3) protonation of arachno-R,R'-C2B10H13(-) to form the final neutral 1-R-2-R'-1,2-C2B10H10 product with loss of hydrogen.     

Synthesis and structural characterization of mono- and bisfunctional o-carboranes

Functionalized o-carboranes are interesting ligands for transition metals. Reaction of LiC2B10H11 with Me2NCH2CH2Cl in toluene afforded 1-Me2NCH2CH2-1,2-C2B10H11 (1). Treatment of 1 with 1 equiv. of n-BuLi gave [(Me2NCH2CH2)C2B10H10]Li ([1]Li), which was a very useful synthon for the production of bisfunctional o-carboranes. Reaction of [1]Li with RCH2CH2Cl afforded 1-Me2NCH2CH2-2-RCH2CH2-1,2-C2B10H10 (R = Me2N (2), MeO (3)). 1 and 2 were also prepared from the reaction of Li2C2B10H10 with excess Me2NCH2CH2Cl. Treatment of [1]Li with excess MeI or allyl bromide gave the ionic salts, [1-Me3NCH2CH2-2-Me-1,2-C2B10H10][I] (4) and [1-Me2N(CH2=CHCH2)CH2CH2-2-(CH2=CHCH2)-1,2-C2B10H10][Br] (6), respectively. Interaction of [1]Li with 1 equiv. of allyl bromide afforded 1-Me2NCH2CH2-2-(CH2=CHCH2)-1,2-C2B10H10 (5). Treatment of [1]Li with excess dimethylfulvene afforded 1-Me2NCH2CH2-2-C5H5CMe2-1,2-C2B10H10 (7). Interaction of [1]Li with excess ethylene oxide afforded an unexpected product 1-HOCH2CH2-2-(CH2=CH)-1,2-C2B10H10 (8). 1 and 3 were conveniently converted into the corresponding deborated compounds, 7-Me2NHCH2CH2-7,8-C2B9H11 (9) and 7-Me2NHCH2CH2-8-MeOCH2CH2-7,8-C2B9H10 (10), respectively, in MeOH-MeOK solution. All of these compounds were characterized by various spectroscopic techniques and elemental analyses. The solid-state structures of 4 and 6-10 were confirmed by single-crystal X-ray analyses.     

Cooperative metal-boron interactions in the reaction of nido-1,2-(Cp*RuH)2B3H7, Cp* = eta5-C5Me5, with HC(triple bond)CPh

Products of the reaction of nido-1,2-(CpRuH)(2)B(3)H(7), 1, and phenylacetylene demonstrate the ways in which cluster metal and main group fragments can combine with an alkyne. Observed at 22 degrees C are (a) reduction to mu-alkylidene Ru-B bridges (isomers nido-1,2-(CpRu)(2)(1,5-mu-C{Ph}Me)B(3)H(7), 2, and nido-1,2-(CpRu)(2)(1,5-mu-C{CH(2)Ph}H)B(3)H(7), 3), (b) reduction to exo-cluster alkyl substituents on boron (nido-1,2-(CpRuH)(2)-3-CH(2)CH(2)Ph-B(3)H(6), 4), (c) cluster insertion with extrusion of a BH(2) fragment into an exo-cluster bridge (nido-1,2-(CpRu)(2)(mu-H)(mu-BH(2))-4-or-5-Ph-4,5-C(2)B(2)H(5), 5), (d) combined insertion with BH(2) extrusion and reduction (nido-1,2-(CpRu)(2)(mu-H)(mu-BH(2))-3-CH(2)CH(2)Ph-5-Ph-4,5-C(2)B(2)H(4), 6), (e) insertion and loss of borane with and without reduction (nido-1,2-(CpRu)(2)-5-Ph-4,5-C(2)B(2)H(7), 7, and isomers nido-1,2-(CpRu)(2)-3-CH(2)CH(2)Ph-4-(and-5-)Ph-C(2)B(2)H(6), 8 and 9), and (f) insertion and borane loss plus reduction (nido-1,2-(CpRu)(2)-3-(trans-CH=CHPh)-5-Ph-4,5-C(2)B(2)H(6), 10). Along with 7, 8, and 10, the reaction at 90 degrees C generates products of insertion and nido- to closo-cluster closure (closo-4-Ph-1,2-(CpRuH)(2)-4,6-C(2)B(2)H(3), 11, closo-1,2-(CpRuH)(2)-3-CH(2)CH(2)Ph-5-Ph-7-CH(2)CH(2)Ph-4,5-C(2)B(3)H(2), 12, closo-1,2-(CpRuH)(2)-5-Ph-4,5-C(2)B(3)H(4), 13, and isomers closo-1,2-(CpRuH)(2)-3-and-7-CH(2)CH(2)Ph-5-Ph-4,5-C(2)B(3)H(3), 14 and 15). The clusters with an exo-cluster bridging BH(2) groups are shown to be intermediates by demonstrating that the major products 5 and 6 rearrange to 13 and convert to 14, respectively. 14 then isomerizes to 15, thus connecting low- and high-temperature products. Finally, all available information shows that the high reactivity of 1 with alkynes can be associated with the "extra" two Ru-H hydrides on the framework of 1 which are required to meet the nido-cluster electron count.     

Oxygen-bridged borate anions from tris(pentafluorophenyl)borane: synthesis, NMR characterization, and reactivity

The previously known anion [(C6F5)3B(mu-OH)B(C6F5)3]- (2) has been prepared by a two-step procedure, involving deprotonation of (C6F5)3BOH2 to give [B(C6F5)3OH]- (1), followed by addition of B(C6F5)3. The solution structure and the dynamics of 2 have been investigated by 1H and 19F NMR spectroscopy. The reaction of [NHEt3]2 with NEt3 resulted in the formation of [NHEt3]+ [(C6F5)3BOH]-, [NHEt3]+ [(C6F5)3BH]-, and (C6F5)3B- (CH2CH=N+ Et2). This indicates that in the presence of a nucleophile anion 2 can dissociate to B(C6F5)3 and 1. The reaction of [HDMAN]2 with 1,8-bis(dimethylamino)naphthalene (DMAN) confirmed this trend. In the presence of water, 2 transformed into the adduct [(C6F5)3BO(H)H...O(H)B(C6F5)3]- (3), containing the borate 1 hydrogen-bonded to a water molecule coordinated to B(C6F5)3. The same compound is formed by treating (C6F5)3BOH2 with 0.5 equiv of a base. A competition study established that for 1 the Lewis acid-base interaction with B(C6F5)3 is about 5 times preferred over H-bonding to (C6F5)3BOH2. The X-ray single-crystal analysis of [2-methyl-3H-indolium]3 provided the first experimental observation of an asymmetric H-bond in the [H3O2]- moiety, the measured O-H and H...O bond distances being significantly different [1.14(2) vs 1.26(2) A]. The reaction of NEt3 with an equimolar mixture of B(C6F5)3 and bis(pentafluorophenyl)borinic acid, (C6F5)2BOH, afforded the novel borinatoborate salt [NHEt3]+ [(C6F5)3BOB(C6F5)2]- ([NHEt3]4). X-ray diffraction showed that the B-O bond distances are significantly shorter than in [(C6F5)3B(mu-OH)B(C6F5)3]-. Variable-temperature 19F NMR revealed high mobility of the five aryl rings, at variance with the more crowded anion 2. 2D NMR correlation experiments showed that in CD2Cl2 the two anions [(C6F5)3BOH]- and [(C6F5)3BH]- form tight ion pairs with [NHEt3]+, in which the NH proton establishes a conventional (BO...HN) or an unconventional (BH...HN), respectively, hydrogen bond with the anion. The diborate anions 2-4, on the contrary, gave loose ion pairs with the ammonium cation, due both to the delocalized anionic charge and to the more sterically encumbered position of the oxygen atoms that should act as H-bond acceptors.     

Synthesis and properties of new ditertiary stibines based upon o-, m- or p-xylyl and m- or p-phenylene backbones and their complexes with tungsten, iron and nickel carbonyls

High yield syntheses for 1,2-, 1,3-, and 1,4-xylyl distibines (1,2-C6H4(CH2SbMe2)2, 1,3-C6H4(CH2SbMe2)2, 1,4-C6H4(CH2SbMe2)2, respectively) from Me2SbCl (conveniently made in situ from Me2PhSb and HClgas) and the appropriate di-Grignard are reported. The 1,3- and 1,4-phenylene distibines, 1,3-C6H4(SbMe2)2 and 1,4-C6H4(SbMe2)2, were made similarly. The new ligands have been characterised by mass spectrometry, 1H and 13C[1H] NMR spectroscopy, and by the preparation of methiodide derivatives. The crystal structures of 1,4-C6H4(CH2SbMe2)2 and [1,3-C6H4(CH2SbMe3)2]I2 have been determined. The synthesis of 1,2-C6H4(CH2SbPh2)2 has been achieved similarly in modest yield and the distibine converted into the tetra-iodo-derivative 1,2-C6H4(CH2SbPh2I2)2. The coordination modes available to these ligands have been probed by the synthesis and characterisation of complexes with nickel, iron and tungsten carbonyls. The crystal structure of [[Fe(CO)4]2[micro-1,3-C6H4(CH2SbMe2)2]] has been determined. The spectroscopic properties of these carbonyl derivatives have been compared with those of complexes of other antimony ligands, and in some cases with diphosphine and diarsine complexes, to probe the electronic properties of the new ligands.     

The synthesis, structure and ethene polymerisation catalysis of mono(salicylaldiminato) titanium and zirconium complexes

The silyl ethers 3-But-2-(OSiMe3)C6H3CH=NR (2a-e) have been prepared by deprotonation of the known iminophenols (1a-e) and treatment with SiClMe3 (a, R = C6H5; b, R = 2,6-Pri2C6H3; c, R = 2,4,6-Me3C6H2; d, R = 2-C6H5C6H4; e, R = C6F5). 2a-c react with TiCl4 in hydrocarbon solvents to give the binuclear complexes [Ti{3-But-2-(O)C6H3CH=N(R)}Cl(mu-Cl3)TiCl3] (3a-c). The pentafluorophenyl species 2e reacts with TiCl4 to give the known complex Ti{3-But-2-(O)C6H3CH=N(R)}2Cl2. The mononuclear five-coordinate complex, Ti{3-But-2-(O)C6H3CH=N(2,4,6-Me3C6H2)}Cl3 (4c), was isolated after repeated recrystallisation of 3c. Performing the dehalosilylation reaction in the presence of tetrahydrofuran yields the octahedral, mononuclear complexes Ti{3-But-2-(O)C6H3CH=N(R)}Cl3(THF) (5a-e). The reaction with ZrCl4(THF)2 proceeds similarly to give complexes Zr{3-But-2-(O)C6H3CH=N(R)}Cl3(THF) (6b-e). The crystal structures of 3b, 4c, 5a, 5c, 5e, 6b, 6d, 6e and the salicylaldehyde titanium complex Ti{3-But-2-(O)C6H3CH=O}Cl3(THF) (7) have been determined. Activation of complexes 5a-e and 6b-e with MAO in an ethene saturated toluene solution gives polyethylene with at best high activity depending on the imine substituent.     

Small scorpionate ligands: silver(I)-organophosphane complexes of 5-CF(3)-substituted scorpionate ligand combining a B-H...Ag coordination motif

The first 5-substituted trihydro(azolyl)borate system, the sodium trihydro(5-CF3-pyrazol-1-yl)borate, Na[H3B(5-(CF3)pz)], has been synthesized by the reaction of 3-trifuoromethyl-pyrazole with NaBH4 in high yield. Na[H3B(5-(CF3)pz)] reacts with AgNO3 in the presence of monodentate tertiary phosphanes PR3 (PR3=P(C6H5)3, P(p-C6H4CH3)3, P(m-C6H4CH3)3, P(o-C6H4CH3)3, or PCH3(C6H5)2) to afford silver(I) bis(phosphane) adducts. These compounds have been characterized by elemental analyses, FTIR, ESI-MS, and multinuclear (1H, 19F, and 31P) NMR spectroscopy. Solid-state structures of {[H3B(5-(CF3)pz)]Ag[P(C6H5)3]2} and {[H3B(5-(CF3)pz)]Ag[P(p-C6H4CH3)3]2} are also reported. They feature kappa2-N,H-bonded trihydro(pyrazolyl)borate ligands and pseudo-tetrahedral silver atoms.     

Ring-strain effects on the oxidation potential of enediynes and enediyne complexes

The metal-enediyne complexes [(eta 5-C5H5)Fe[eta 5-1,2-C5H3C identical to C(CH2)nC identical to]] (4, n = 4; 5, n = 5) and [(eta 5-C5H5)-Fe[eta 5-1,2-C5H3(C identical to C Me)2]] (6) were prepared from 1,2-diethynylferrocene (3). Complexes 4 and 5 were characterized in the solid state by X-ray crystallographic analysis. The structures of 4 and 6 were determined by computation using ab initio methods. A correlation was observed between ring-strain and increased ease of electrochemical oxidation along the series 6 (+0.164 V) to 5(+0.152 V) to 4 (+0.123 V). A similar trend in ionization potentials was identified in both the gas phase and in solution by computational methods.     

Metallacarboranes as building blocks for polyanionic polyarmed aryl-ether materials

Polyanionic species have been obtained in high yield by a new route in the ring-opening reaction of cyclic oxonium [3,3'-Co(8-C4H8O2-1,2-C2B9H10)(1',2'-C2B9H11)] (2) by using carboxylic acids, Grignard reagents, and thiocarboranes as nucleophiles. The crystal structures of Na3(H2O)(C2H5OH)[1',3',5'-{3,3'-Co(8-O(CH2CH2O)2-1,2-C2B9H10)(1',2'-C2B9H11)}3-C6H3] and Na(H2O)[3,3'-Co(8-O(CH2CH2O)2C(O)CH3-1,2-C2B9H10)(1',2'-C2B9H11)] show that the chain contributes three or two oxygen atoms for coordination to Na(+), and interestingly, the [3,3'-Co(1,2-C2B9H11)2](-) moiety provides extra B-H coordination sites. These B-H...Na interactions in the solid state have also been confirmed by dynamic NMR studies in solution. These new polyanionic compounds that contain multiple carborane or metallacarborane clusters at their periphery may prove useful as new classes of boron neutron capture therapy compounds with enhanced water solubility and as a core to make a new class of dendrimers.     

Unusual collision-induced dissociation of fluorated and non-fluorated alpha-nitrotoluene analogs in a gas chromatograph triple-stage quadrupole mass spectrometer under electron-capturing negative-ion chemical ionization conditions

Unusual collision-induced dissociation (CID) of perfluorated and non-perfluorated alpha-nitrotoluene analogs in a gas chromatograph triple-stage quadrupole (TSQ) mass spectrometer (GC-QqQ-MS) under electron-capturing negative-ion chemical ionization conditions is reported. CID of [M - 1]- of alpha-nitro-2,3,4,5,6-pentafluorotoluene (C6F5CH2-NO2) and alpha-nitro-2,5-difluorotoluene (C6H3F2CH2-NO2) produced an intense ion with m/z 66. By using 15N- or 18O-labelled C6F5CH2-NO2 analogs, we found that this anion has the formula C3NO. By contrast, CID of [M - 1]- of alpha-nitrotoluene (C6H5CH2-NO2) and alpha-nitro-3,5-difluorotoluene (C6H3F2CH2-NO2) produced an anion with m/z 86 with the formula C3H4NO2. The expected CID of the C-N-bond of all alpha-nitrotoluene analogs to form the nitrite anion (NO2-, m/z 46) did not occur. We propose mechanisms for the formation of the anions C3NO and C3H4NO2 in the collision chamber of the TSQ mass spectrometer. The most likely structures for the anion C3NO are :C=C=C=N--O and N triple bond C-C triple bond C--O-. The unique CID behavior of C6F5CH2--NO2 can be utilized to unequivocally identify and accurately quantify nitrite in biological fluids by GC-tandem MS.     

Ruthenacarboranes from the reaction of nido-1,2-(Cp*RuH)2B3H7 with HC [triple bond] CCO2Me, Cp* = eta5-C5Me5. Hydrometalation, alkyne incorporation, and functional group modification via cooperative metal-boron interactions within a metallaborane cluster framework

Reaction of nido-1,2-(Cp*RuH)2B3H7, 1, and methyl acetylene monocarboxylate under kinetic control generates nido-1,2-(Cp*Ru)2(mu-C[[CO2Me]Me])B3H7 (a pair of geometric isomers, 3 and 5) and nido-1,2-(Cp*Ru)2(1,3-mu-C[[CH2CO2Me]H])B3H7, 4, which display the first examples of exo-cluster mu-alkylidene Ru-B bridges generated by hydrometalation of an alkyne on the cluster framework. Both 3 and 5, but not 4, rearrange into arachno-2,8-mu(C)-5-eta1(O)-Me[CO2Me]C-1,2-(Cp*Ru)2B3H7, 2, in which an unprecedented intramolecular coordination of the carbonyl oxygen atom of the alkyne substituent to a boron framework site opens the ruthenaborane skeleton. Compound 2, in turn, is an intermediate in the formation of the ruthenacarborane nido-1,2-(Cp*Ru)2-3-OH-4-OMe-5-Me-4,5-C2B2H5, 12, in which the carbonyl-oxygen double bond has been cleaved as its oxygen atom inserts into a B-H bond and the carbonyl carbon inserts into the metallaborane framework. In a parallel reaction pathway, nido-1,2-(Cp*Ru)2-5-CO2Me-4,5-C2B2H7, 6, nido-1,2-(Cp*Ru)2-4-B(OH)2-5-CO2Me-4,5-C2B2H6, 16, and nido-1,2-(Cp*Ru)2(mu-H)(mu-BH2)-3-(CH2)2CO2Me-CO2Me-4,5-C2B2H4 (a pair of geometric isomers, 7 and 14, which contain an unusual Ru-B borane bridge) are formed. On heating, 7 rearranges to yield nido-1,2-(Cp*Ru)2-3-(CH2)2CO2Me-4-BH2-5-CO2Me-4,5-C2B2H5, 13, whereas 14 converts to nido-1,2-(Cp*Ru)2-3-(CH2)2CO2Me-4-CO2Me-4,5-C2B2H6, 8. Under thermodynamic control, nido-1,2-(Cp*Ru)2-4,5-B[(CH2)2CO2Me]CO(MeO)[C(CH2)CO2Me]-4,5-C2B2H6, 11, is the major product accompanied by lesser amounts of 6 and 1,2-(Cp*Ru)2-4-OMe-5-Me-4,5-C2B2H6, 10. Compound 11 features a five-membered heterocycle containing a boron atom. The structure of 7, which is an intermediate in the formation of 11, provides the basis for an explanation of this complex condensation of three alkynes. A previously unrecognized role for an exo-cluster bridging borene generated from the metallaborane skeleton by addition of the alkyne is also a feature of this chemistry. Reinsertion or loss of this boron fragment accounts for much of the chemistry observed. NMR experiments reveal labile intermediates, and one has been sufficiently characterized to provide mechanistic insight on the early stages of the alkyne-metallaborane addition reaction. All isolated compounds have been spectroscopically characterized, and most have been structurally characterized in the solid state.     

Syntheses of 1-alkyl-1,2,4-triazoles and the formation of quaternary 1-alkyl-4-polyfluoroalkyl-1,2,4-triazolium salts leading to ionic liquids

1,2,4-triazole was alkylated (alkyl = methyl, butyl, heptyl, decyl) at N-1 in >90% isolated yields. The resulting 1-alkyl triazoles were quaternized at N-4 in >98% isolated yields using fluorinated alkyl halides with >98% isolated yields, under neat reaction conditions at 100-120 degrees C to form N1-CH(3)-N4-(CH(2))(2)C(m)F(2)(m)(+ 1)-triazolium (Taz) iodide (m = 1, 6), N1-C(4)H(9)-N4-(CH(2))(2)C(m)F(2)(m)(+ 1)-Taz iodide (m = 1, 4, 6), N1-C(7)H(15)-N4-(CH(2))(2)C(m)F(2)(m)(+ 1)-Taz iodide (m = 1, 4, 6), N1-C(10)H(21)-N4-(CH(2))(2)C(m)F(2)(m)(+1)-Taz iodide (m = 1, 4), and N1-C(n)H(2)(n )(+ 1)-N4-(CH(2))(2)F-Taz bromide (n = 4, 7, 10). Single-crystal X-ray analyses confirmed the structure of [1-CH(3)-4-CH(2)CH(2)CF(3)-Taz](+)I(-). It crystallized in the orthorhombic space group Pccn, and the unit cell dimensions were a = 13.8289(9) A, b = 17.3603(11) A, c = 9.0587(6) A (alpha = beta = gamma = 90 degrees ). Metathesis of these polyfluoroalkyl-substituted triazolium halides with other salts led to the formation of quaternary compounds, some of which comprise ionic liquids, namely, [R(R(f))-Taz](+)Y(-) (Y = NTf(2), BF(4), PF(6), and OTf), in good isolated yields without the need for further purification: N1-CH(3)-N4-(CH(2))(2)C(m)F(2)(m)( +) (1)-Taz Y (m = 1, 6; Y = NTf(2)), N1-C(4)H(9)-N4-(CH(2))(2)C(m)F(2)(m)(+ 1)-Taz Y (m = 1, 4, 6; Y = NTf(2)), N1- C(7)H(15)-N4-(CH(2))(2)C(m)F(2)(m)(+ 1)-Taz Y (m = 1, 4, 6; Y = NTf(2)), N1-C(10)H(21)-N4-(CH(2))(2)C(m)F(2)(m)(+1)-Taz Y (n = 1, 4; Y = NTf(2)), N1-C(n)H(2)(n )(+ 1)-N4-(CH(2))(2)F-Taz Y (n = 7, 10; Y = NTf(2)), N1-C(10)H(21)-N4-(CH(2))(2)F-TazY (Y = OTf), N1-C(7)H(15)-N4-(CH(2))(2)F-TazY (Y = BF(4)), N1-C(4)H(9)-N4-(CH(2))(2)C(m)F(2)(m) (+ 1)-Taz Y (m = 4, 6; Y = PF(6)), N1-C(7)H(15)-N4-(CH(2))(2)C(4)F(9)-Taz Y (Y = PF(6)), N1-C(4)H(9)-N4-(CH(2))(2)C(m)F(2)(m)(+ 1)-Taz Y (m = 4, 6; Y = OTf). All new compounds were characterized by (1)H, (19)F, and (13)C NMR and MS spectra and elemental analyses. T(g)s and T(m)s of ionic liquids were determined by DSC.     

(N-pyrrolyl)B(C6F5)2--a new organometallic Lewis acid for the generation of group 4 metallocene cation complexes

Treatment of the (C6F5)2BF x OEt2 (3) complex with N-pyrrolyl lithium gives bis(pentafluorophenyl)(N-pyrrolyl)borane (2), a strong organometallic Lewis acid, which was characterized by X-ray diffraction (B-N bond length: 1.401(5) A). It exhibits a columnar superstructure in the crystal and contains pi-stacks of pyrrolyl units. Compound 2 readily abstracts alkyl anions from a variety of alkyl Group 4 metallocene-type complexes and leads to the clean formation of the respective metallocene ions or ion pairs. For example, the treatment of Cp3ZrCH3 (9) with 2 transfers a methyl anion to yield the ion pair [Cp3Zr]+[(C4H4N)B(CH3)(C6F5)2]- (12). The X-ray crystal structure analysis of 12 shows a close contact between zirconium and the pyrrolyl-beta-carbon (2.641(2) A). The borane 2 adds to (butadiene)zirconocene (13) to yield the betaine system [Cp2Zr]+[(C4H6)B- (NC4H4)(C6F)2]- (15). Complex 15 contains a distorted eta3-allyl moiety inside the metallacyclic framework and it features an internal Zr+...(pyrrolyl)B- ion pair interaction with a Zr...pyrrolyl-alphacarbon separation of 2.723(3) A (determined by X-ray diffraction). From the dynamic NMR spectra of 15 the bond strength of the internal ion pair interaction was estimated to be deltaGdiss (223 K) approximately = to15 kcalmol(-1). Treatment of dimethylzirconocene (16) with 2 yields the metallocene borate salt [Cp2ZrCH3]+[(C4H4N)B(CH3)(C6F5)2]- (17), which is an active catalyst for the polymerization of ethene.     

Rare-earth-metal-hydrocarbyl complexes bearing linked cyclopentadienyl or fluorenyl ligands: synthesis, catalyzed styrene polymerization, and structure-reactivity relationship

A series of rare-earth-metal-hydrocarbyl complexes bearing N-type functionalized cyclopentadienyl (Cp) and fluorenyl (Flu) ligands were facilely synthesized. Treatment of [Y(CH(2)SiMe(3))(3)(thf)(2)] with equimolar amount of the electron-donating aminophenyl-Cp ligand C(5)Me(4)H-C(6)H(4)-o-NMe(2) afforded the corresponding binuclear monoalkyl complex [({C(5)Me(4)-C(6)H(4)-o-NMe(μ-CH(2))}Y{CH(2)SiMe(3)})(2)] (1a) via alkyl abstraction and C-H activation of the NMe(2) group. The lutetium bis(allyl) complex [(C(5)Me(4)-C(6)H(4)-o-NMe(2))Lu(η(3)-C(3)H(5))(2)] (2b), which contained an electron-donating aminophenyl-Cp ligand, was isolated from the sequential metathesis reactions of LuCl(3) with (C(5)Me(4)-C(6)H(4)-o-NMe(2))Li (1 equiv) and C(3)H(5)MgCl (2 equiv). Following a similar procedure, the yttrium- and scandium-bis(allyl) complexes, [(C(5)Me(4)-C(5)H(4)N)Ln(η(3)-C(3)H(5))(2)] (Ln=Y (3a), Sc (3b)), which also contained electron-withdrawing pyridyl-Cp ligands, were also obtained selectively. Deprotonation of the bulky pyridyl-Flu ligand (C(13)H(9)-C(5)H(4)N) by [Ln(CH(2)SiMe(3))(3)(thf)(2)] generated the rare-earth-metal-dialkyl complexes, [(η(3)-C(13)H(8)-C(5)H(4)N)Ln(CH(2)SiMe(3))(2)(thf)] (Ln=Y (4a), Sc (4b), Lu (4c)), in which an unusual asymmetric η(3)-allyl bonding mode of Flu moiety was observed. Switching to the bidentate yttrium-trisalkyl complex [Y(CH(2)C(6)H(4)-o-NMe(2))(3)], the same reaction conditions afforded the corresponding yttrium bis(aminobenzyl) complex [(η(3)-C(13)H(8)-C(5)H(4)N)Y(CH(2)C(6)H(4)-o-NMe(2))(2)] (5). Complexes 1-5 were fully characterized by (1)H and (13)C NMR and X-ray spectroscopy, and by elemental analysis. In the presence of both [Ph(3)C][B(C(6)F(5))(4)] and AliBu(3), the electron-donating aminophenyl-Cp-based complexes 1 and 2 did not show any activity towards styrene polymerization. In striking contrast, upon activation with [Ph(3)C][B(C(6)F(5))(4)] only, the electron-withdrawing pyridyl-Cp-based complexes 3, in particular scandium complex 3b, exhibited outstanding activitiy to give perfectly syndiotactic (rrrr >99%) polystyrene, whereas their bulky pyridyl-Flu analogues (4 and 5) in combination with [Ph(3)C][B(C(6)F(5))(4)] and AliBu(3) displayed much-lower activity to afford syndiotactic-enriched polystyrene.     

Syntheses of functionalized ferratricarbadecaboranyl complexes

The reactions of nitriles (RCN) with arachno-4,6-C(2)B(7)H(12)(-) provide a general route to functionalized tricarbadecaboranyl anions, 6-R-nido-5,6,9-C(3)B(7)H(9)(-), R = C(6)H(5) (2(-)), NC(CH(2))(4) (4(-)), (p-BrC(6)H(4))(Me(3)SiO)CH (6(-)), C(14)H(11) (8(-)), and H(3)BNMe(2)(CH(2))(2) (10(-)). Further reaction of these anions with (eta(5)-C(5)H(5))Fe(CO)(2)I yields the functionalized ferratricarbadecaboranyl complexes 1-(eta(5)-C(5)H(5))-2-C(6)H(5)-closo-1,2,3,4-FeC(3)B(7)H(9) (3), 1-(eta(5)-C(5)H(5))-2-NC(CH(2))(4)-closo-1,2,3,4-FeC(3)B(7)H(9) (5), 1-(eta(5)-C(5)H(5))-2-[(p-BrC(6)H(4))(Me(3)SiO)CH]-closo-1,2,3,4-FeC(3)B(7)H(9) (7), 1-(eta(5)-C(5)H(5))-2-C(14)H(11)-closo-1,2,3,4-FeC(3)B(7)H(9) (9), and 1-(eta(5)-C(5)H(5))-2-H(3)BNMe(2)(CH(2))(2)-closo-1,2,3,4-FeC(3)B(7)H(9) (11). Reaction of 11 with DABCO (triethylenediamine) resulted in removal of the BH(3) group coordinated to the nitrogen of the side chain, giving 1-(eta(5)-C(5)H(5))-2-NMe(2)(CH(2))(2)-closo-1,2,3,4-FeC(3)B(7)H(9) (12). Crystallographic studies of complexes 3, 5, 7, 9, and 11 confirmed that these complexes are ferrocene analogues in which a formal Fe(2+) ion is sandwiched between the cyclopentadienyl and tricarbadecaboranyl monoanionic ligands. The metals are eta(6)-coordinated to the puckered six-membered face of the tricarbadecaboranyl cage, with the exopolyhedral substituents bonded to the low-coordinate carbon adjacent to the iron.     

Enantioselective self-assembly of bimetallic [Mn(II) (delta)-Cr(III)(C2O4)3]- and [Mn(II) (lambda)-Cr(III)(C2O4)3]- layered anionic networks templated by the optically active (Rp)- and (Sp)-[1-CH2N(n-C3H7)3-2-CH3-C5H3Fe-C5H5]+ ions

The ferrocenic ammonium (Rp)- and (Sp)-[1-CH2NR(3-)-2-CH3-C5H3Fe-C5H5] iodide salts with R=CH3, C2H5, n-C3H7, n-C4H9, were synthesized starting from the (Rp)- and (Sp)-[1-CH2N(CH3)2-2-CH3-C5H3Fe-C5H5] amines obtained in their optically active forms through asymmetric cyclopalladation of [C5H5Fe-C5H4CH2N(CH3)2]. 1H NMR studies of these planar chiral 1,2-disubstituted ferrocenic ammonium iodide salts in the presence of the (Delta)-(tris(tetrachlorobenzenediolato)phosphate(V) anion), [(Delta)-Trisphat] support the formation of specific diastereomeric ion pairs. Such intermolecular interactions can be related to the self-assembly of the two-dimensional optically active compounds [[(Sp)-1-CH2N(n-C3H7)3-2-CH3-C5H3Fe-C5H5][Mn (Delta)-Cr(C2O4)3]] and [[(Rp)-1-CH2N(n-C3H7)3-2-CH3-C5H3Fe-C5H5][Mn (Lambda)-Cr(C2O4)3]] starting from the resolved (Rp)- and (Sp)-[1-CH2N(n-C3H7)3-2-CH3-C5H3Fe-C5H5]+ ion associated to the racemic anionic building block rac-[Cr(C2O4)3]3- and Mn2+. Both enantiomeric forms of the networks behave as ferromagnets with a Curie temperature of 5.7 K.     

Mononuclear and dinuclear palladium and nickel complexes of phosphinimine-based tridentate ligands

The tridentate bis-phosphinimine ligands O(1,2-C(6)H(4)N=PPh(3))(2)1, HN(1,2-C(2)H(4)N=PR(3))(2) (R = Ph 2, iPr 3), MeN(1,2-C(2)H(4)N=PPh(3))(2)4 and HN(1,2-C(6)H(4)N=PPh(3))(2)5 were prepared. Employing these ligands, monometallic Pd and Ni complexes O(1,2-C(6)H(4)N=PPh(3))(2)PdCl(2)6, RN(1,2-CH(2)CH(2)N=PPh(3))(2)PdCl][Cl] (R = H 7, Me 8), [HN(1,2-CH(2)CH(2)N=PiPr(3))(2)PdCl][Cl] 9, [MeN(1,2-CH(2)CH(2)N=PPh(3))(2)PdCl][PF(6)] 10, [HN(1,2-CH(2)CH(2)N=PPh(3))(2)NiCl(2)] 11, [HN(1,2-CH(2)CH(2)N=PR(3))(2)NiCl][X] (X = Cl, R = iPr 12, X = PF(6), R = Ph 13, iPr 14), and [HN(1,2-C(6)H(4)N=PPh(3))(2)Ni(MeCN)(2)][BF(4)]Cl 15 were prepared and characterized. While the ether-bis-phosphinimine ligand 1 acts in a bidentate fashion to Pd, the amine-bis-phosphinimine ligands 2-5 act in a tridentate fashion, yielding monometallic complexes of varying geometries. In contrast, initial reaction of the amine-bis-phosphinimine ligands with base followed by treatment with NiCl(2)(DME), afforded the amide-bridged bimetallic complexes N(1,2-CH(2)CH(2)N=PR(3))(2)Ni(2)Cl(3) (R = Ph 16, iPr 17) and N(1,2-C(6)H(4)N=PPh(3))(2)Ni(2)Cl(3)18. The precise nature of a number of these complexes were crystallographically characterized.