Application of high-performance liquid chromatography to the purification of the putative intestinal peptide transporter

A membrane protein of relative molecular mass (Mr) 127,000 was identified by photoaffinity labelling as (a component of) the uptake system for small peptides and beta-lactam antibiotics in rabbit small intestine. This binding protein is a microheterogeneous glycosylated integral membrane protein which could be solubilized with non-ionic detergents and enriched by lectin affinity chromatography on wheat germ lectin agarose. For the final purification of this protein and separation from aminopeptidase N of Mr 127,000, fast protein liquid chromatography (FPLC) was used. Gel permeation, hydroxyapatite and hydrophobic interaction chromatography were not successful for the purification of the 127,000-dalton binding protein. By anion-exchange chromatography on a Mono Q column with either Triton X-100 or n-octylglucoside as detergent, a partial separation of the 127,000-dalton binding protein from aminopeptidase N was achieved. By cation-exchange chromatography on a Mono S HR 5/5 column at pH 4.5 using Triton X-100 as detergent also only a partial separation from aminopeptidase N could be achieved. If, however, Triton X-100 was replaced with n-octylglucoside, the binding protein for beta-lactam antibiotics and small peptides of Mr 127,000 could be completely separated from aminopeptidase N. These results indicate that Triton X-100 should be avoided for the purification of integral membrane proteins because mixed protein-detergent micelles of high molecular weight prevent a separation into the individual membrane proteins. The putative peptide transport protein was finally purified by rechromatography on Mono S and was obtained more than 95% pure as determined densitometrically after sodium dodecyl sulphate gel electrophoresis. By application of FPLC even microheterogeneous membrane glycoproteins from the intestinal mucosa can be purified to such an extent that a sequence analysis and immunohistochemical localization with antibodies prepared from the purified protein is possible.     

Daunomycin binding to detergent micelles: a model system for evaluating the hydrophobic contribution to drug-DNA interactions

The interaction of daunomycin with sodium dodecyl sulfate and Triton X-100 micelles was investigated as a model for the hydrophobic contribution to the free energy of DNA intercalation reactions. Measurements of visible absorbance, fluorescence lifetime, steady-state fluorescence emission intensity, and fluorescence anisotropy indicate that the anthraquinone ring partitions into the hydrophobic micelle interior. Fluorescence quenching experiments using both steady-state and lifetime measurements demonstrate reduced accessibility of daunomycin in sodium dodecyl sulfate micelles to the anionic quencher iodide and to the neutral quencher acrylamide. Quenching of daunomycin fluorescence by iodide in Triton X-100 micelles was similar to that seen with free daunomycin. Studies of the energetics of the interaction of daunomycin with micelles by fluorescence and absorbance titration methods and by isothermal titration calorimetry in the presence of excess micelles revealed that association with sodium dodecyl sulfate and Triton X-100 micelles is driven by a large negative enthalpy. Association of the drug with both types of micelles also has a favorable entropic contribution, which is larger in magnitude for Triton X-100 micelles than for sodium dodecyl sulfate micelles. The thermodynamic profile for the interaction of daunomycin with both types of micelles is characteristic of the "nonclassical" hydrophobic effect. The enthalpy for the interaction of daunomycin with sodium dodecyl sulfate micelles increases nonlinearly with temperature, indicating a positive (and temperature dependent) heat capacity change. The binding isotherm for daunomycin association with sodium dodecyl sulfate micelles was cooperative, with a Hill coefficient of 1.6. The cooperative behavior and the positive heat capacity change suggest that the drug alters micelle size or imposes order on the hydrocarbon interior of the micelle.     

Immobilization of Pseudomonas stutzeri Lipase for the Transesterification of Wood Sterols with Fatty Acid Esters

Lipase from Pseudomonas stutzeri PL-836 was immobilized on hydrophobic supports and evaluated in the transesterification of wood sterols in solvent-free and solvent-containing media. Triton X-100 was used as additive during immobilization in butyl and octadecyl sepabeads increasing enzyme activity yield by 5% and 60%, respectively. Hyperactivation was observed during immobilization in EC octadecyl sepabeads with enzyme activity yield of 200% and protein immobilization yield of 93%. Thermostability of the immobilized enzyme was assessed at 50 °C in different media in the absence and presence of exogenous solvents. The presence of Triton X-100 during immobilization reduced enzyme stability while tert-butanol increased it. Transesterification in solvent-free and solvent-containing medium with lipase immobilized in EC octadecyl sepabeads showed that the presence of exogenous solvent increased both conversion yield and productivity. At rather high levels of biocatalyst hydration (40% on wet basis) the presence of tert-butanol in the reaction medium more than doubled conversion yield and productivity.     

Spectrophotometric and Thermodynamic Studies of Micellar Interaction of Surfactants with p-Nitrophenol

Interaction of p-nitrophenol (NPH) with various surfactants, viz., cetylpyridinium chloride (cationic), sodium dodecylsulphate (anionic) and Triton X-100 (nonionic) are studied spectrophotometrically, in aqueous-micellar medium. The interactions are of electrostatic as well as hydrophobic nature. The strength of interaction is represented in terms of the equilibrium constants and other thermodynamic quantities of formation of the p-nitrophenol-micelle donor-acceptor complexes in addition to a shift in the acid-base equilibrium of NPH. The interaction between NPH and CPC is much stronger that with Triton X-100 whereas the interaction with SDS is very weak. Formation of 1:1 charge transfer (or electron donor-acceptor) complex is evidenced from the results. The interaction of NPH is enthalpy driven with CPC and entropy driven with Triton X-100.     

The Photostabilization of Hemoglobin in Triton X-100 Aqueous Solution and Triton X-100/n-C5H11OH/H2O Microemulsion

The influence of UV-irradiation on the interaction of hemoglobin (Hb) with Triton X-100 is investigated by UV–Vis absorption spectroscopy, fluorescence spectroscopy and freeze-fractured transmission electron microscopy. It is found that in Triton X-100/H₂O systems Hb can convert to hemichrome but heme is not present, whereas in Triton X-100/n-C₅H₁₁OH/H₂O microemulsion Hb can convert to hemichrome and then induce the heme monomer to leave the hydrophobic cavity of Hb. UV-irradiation can also convert Hb to hemichrome, and subsequently make heme to be photodegraded, in which the conversion rate depends on the structure of the surfactant aggregates. Furthermore, in order to understand the mechanism of photostabilization of Hb in Triton X-100 systems, the photostabilization of heme in the Triton X-100 aqueous solutions and Triton X-100/n-C₅H₁₁OH/H₂O microemulsions has been studied.     

Surfactant-induced amorphous aggregation of tobacco mosaic virus coat protein: a physical methods approach

The interactions of non-ionic surfactant Triton X-100 and the coat protein of tobacco mosaic virus, which is an established model for both ordered and non-ordered protein aggregation, were studied using turbidimetry, differential scanning calorimetry, isothermal titration calorimetry, and dynamic light scattering. It was found that at the critical aggregation concentration (equal to critical micelle concentration) of 138 x 10(-6) M, Triton X-100 induces partial denaturation of tobacco mosaic virus coat protein molecules followed by protein amorphous aggregation. Protein aggregation has profound ionic strength dependence and proceeds due to hydrophobic sticking of surfactant-protein complexes (start aggregates) with initial radii of 46 nm. It has been suggested that the anionic surfactant sodium dodecyl sulfate forms mixed micelles with Triton X-100 and therefore reverses protein amorphous aggregation with release of protein molecules from the amorphous aggregates. A stoichiometric ratio of 5 was found for Triton X-100-sodium dodecyl sulfate interactions.     

表面活性离子液体溴化N-十二烷基异喹啉与非离子表面活性剂Triton X-100在水溶液中的混合胶束

用等温滴定微量热法测定表面活性离子液体溴化N-十二烷基异喹啉([C₁₂iQuin]Br)与非离子表面活性剂Triton X-100混合物在水溶液中的临界胶束浓度。并以¹H核磁共振(NMR)和二维核Overhauser效应增强谱(2D NOESY)研究[C₁₂iQuin]Br与Triton X-100在混合胶束中的作用机理。研究结果显示：混合胶束中,Triton X-100分子的苯环定位于混合胶束的内核,聚氧乙烯链卷曲在异喹啉环周围。本文还应用规则溶液理论和浊点法对比研究了十二烷基三甲基溴化铵(DTAB)-Triton X-100混合胶束体系的相关性质。     

Collection of iron(III) from homogeneous aqueous solutions on membrane filters using Chromazurol B with Triton X-100.

A membrane filtration method was examined concerning the effective collection of iron(III) from a homogeneous aqueous solution with Chromazurol B (CAB), one of the triphenylmethane dyes, as a precipitating reagent in the presence of a non-ionic surfactant, polyethylene glycol mono[4-(1,1,3,3-tetramethylbutyl)phenyl]ether (Triton X-100). A formed blue Fe(III)-CAB complex was collected as a precipitate on a membrane filter by filtration under suction from a homogeneous aqueous solution in the pH range over about 2. The original solution was prepared at a concentration ratio of CAB to Fe(III) of to 10, and that of Triton X-100 to CAB of 10 to 100. It was then adjusted to a pH value of between 1.0 and 6.5. A linear relationship (r = 0.999) was obtained between the initial concentration and the found one of Fe(III) in the range of 2.0 x 10(-5) to 4.0 x 10(-4) mol dm(-3) at a fixed concentration ratio of CAB to Fe(III) of 3 and that of Triton X-100 to CAB of 20. This membrane filtration with CAB and Triton X-100 may be utilized for the separation of Fe(III) as a background species.     

Effect of surface composition on the adsorption of photosystem I onto alkanethiolate self-assembled monolayers on gold

We have used self-assembled monolayers (SAMs) prepared from omega-terminated alkanethiols on gold to generate model surfaces and examine the effect of surface composition on the adsorption of Photosystem I (PSI), stabilized in aqueous solution by Triton X-100. Triton-stabilized PSI adsorbs to high-energy surfaces prepared from HO- and HO2C-terminated alkanethiols but does not adsorb to low-energy surfaces. The inhibition of PSI adsorption at low-energy surfaces is consistent with the presence of a layer of Triton X-100 that adsorbs atop the hydrophobic SAM and presents a protein-resistant poly(ethylene glycol) (PEG) surface. While the presence of the PEG surface prevents the adsorption of PSI, the displacement of the inhibiting layer of Triton X-100 by dodecanol, a more active surfactant, greatly enhances the adsorption of PSI. This inhibiting effect by Triton X-100 can be extended to other protein systems such as bovine serum albumin.     

Hydrogen/deuterium exchange of hydrophobic peptides in model membranes by electrospray ionization mass spectrometry

We demonstrate here that the hydrogen/deuterium solvent exchange (HDX) properties of the transmembrane fragment of the M2 protein of Influenza A (M2-TM) incorporated into lipid vesicles or detergent micelles can be studied with straightforward electrospray (ESI) and nanospray mass spectrometry (MS) configurations provided that key factors, including sample preparation techniques, are optimized. Small unilamellar vesicle preparations were obtained by solubilizing dimyristoyl phosphatidylcholine (DMPC) and the M2-TM peptide in aqueous solution with n-octyl-β-D-glycopyranoside, followed by dialysis to remove the detergent. Electron microscopy experiments revealed that subsequent concentration by centrifugation introduced large multilamellar aggregates that were not compatible with ESI-MS. By contrast, a lyophilization-based concentration procedure, followed by thawing above the liquid crystal transition temperature of the lipid component, maintained the liposome size profile and yielded excellent ion fluxes in both ESI-MS and nano-ESI-MS. Using these methods the global HDX profile of M2-TM in aqueous DMPC vesicles was compared with that in methanol, demonstrating that several amide sites were protected from exchange by the lipid membrane. We also show that hydrophobic peptides can be detected by ESI-MS in the presence of a large molar excess of the detergent Triton X-100. The rate of HDX of M2-TM in Triton X-100 micelles was faster than that in DMPC vesicles but slower than when the peptide had been denatured in methanol. These results indicate that the accessibility of backbone amide sites to the solvent can be profoundly affected by membrane protein structure and dynamics, as well as the properties of model bilayer systems.     

Solution properties of hydrophobically modified acrylamide-based polysulfobetaines in the presence of surfactants

Polymer–surfactant interactions in aqueous solutions of a acrylamide-based, hydrophobically modified polysulfobetaine (ADS) containing 3-[N-(2-methacryloxylethyl)-N,N-dimethylammonio]-propane sulfonate and stearyl methylacrylate, with sodium dodedyl sulfate (SDS), N-dodecyl-N,N,N-trimethylammonium bromide (DTAB), and Triton X-100 were studied using surface tension, rheology, Rayleigh light scattering, and dynamic laser light scattering techniques. The purpose of this study was to highlight the influences of the surfactant structure and the nature of the surfactant head group on the polymer–surfactant interactions. The results show that the interaction and association between ADS and surfactants are distinctly varied depending on surfactant type and surfactant concentration. SDS produced the strongest interactions with ADS, while DTAB and Triton X-100 interact with ADS to a lesser degree, which is attributed to surfactant structure and the nature of the surfactant head group. For SDS and DTAB, there are two driving forces for the complexation of the polymer and surfactants, resulting from the electrostatic interaction and the hydrophobic association. However, for the nonionic surfactant Triton X-100, only hydrophobic association predominated in the interaction between ADS and the surfactant. The mechanism and reconstruction of the polymer–surfactant complexes have been evaluated and discussed.     

Dynamic Interfacial Tension of Surfactant Mixtures at Liquid-Liquid Interfaces

Dynamic interfacial tensions for surfactant mixtures at liquid-liquid interfaces were obtained with a drop volume tensiometer. The surfactants tested were Triton X-100, palmitic acid, and Span 80 at both the water-hexadecane and water-mineral oil interfaces. Two-surfactant mixtures were examined with the surfactants initially dissolved in different phases to minimize bulk-phase interactions. For concentrations below the CMC, it was found that the adsorption kinetics of palmitic acid and Triton X-100 mixtures were dominated by the latter surfactant. Apparent diffusion coefficients were obtained for Triton X-100 both in the absence and in the presence of palmitic acid. These values were largely insensitive to the presence of palmitic acid. For mixtures of Span 80 and Triton X-100, the adsorption kinetics were found to be influenced significantly by both surfactants. In this case, relative changes in surfactant concentrations affected the dynamic interfacial tension of the mixed system. A previously proposed multicomponent adsorption model described the dynamic interfacial tension adequately at low concentrations of Triton X-100, when desorption could be neglected. At higher concentrations, modifications were needed to account for solubilization into the oil phase. These corrections allowed the model to describe the long time adsorption quite well. However, predicted values of short time interfacial tensions were overestimated, likely due to a synergistic interaction of the two surfactants. Copyright 1999 Academic Press.     

Tensammetry with accumulation on the hanging mercury drop electrode : Part 3. The behaviour of triton X-100 in mixtures with PEG-9000

The behaviour of Triton X-100, which can be present in monomeric or associated form, and its mixtures with PEG-9000, which does not undergo association, is described. The tensammetric curve of Triton X-100 alone shows one or two peaks at negative potentials, depending on the concentration of Triton X-100, i.e., on the presence of associated forms. For <2 mg l^?1, there is one broad peak, related to monomers of Triton X-100. The calibration plot for this peak is sigmoidal but its rising section (0.05–0.20 mg l^?1) is approximately linear. The calibration curve of the second, much narrower, peak related to associated forms of Triton X-100, grows parabolically with increasing concentration of Triton X-100. The behaviour of a mixture of PEG-9000 with a larger amount of Triton X-100 is similar to the behaviour of a model mixture of components with sufficiently different properties (e.g., PEG 1500/PEG 9000). The peak for PEG-9000, the stronger surfactant, is relatively less affected by a large amount of Triton X-100. Even this effect can be decreased by using a suitable preconcentration potential (?1.45 V vs. SCE) so that PEG-9000 can be determined in the presence of a 1000-fold amount of Triton X-100. Both peaks of Triton X-100 are greatly decreased by the presence of PEG-9000 and the broad peak can be completely suppressed. Triton X-100 cannot be determined accurately in the presence of unknown amounts of PEG-9000.     

Wetting and adsorption: II. Adsorption of Triton X-100 and Triton X-305 onto carbon black from water and cyclohexane solutions

The adsorption isotherms of nonionic surfactants Triton X-100 and Triton X-305 from water and cyclohexane on carbon black have been determined at 15 and 30°C. The Langmuir-type and BET-type isotherms are obtained for adsorption of Triton X-100 and Triton X-305 from water and cyclohexane respectively. Both the contact angles of water for graphite/water/air and graphite/water/cyclohexane decrease monotonously with increasing surfactant concentration. From these results, it is proposed that the adsorption of Triton X-100 and Triton X-305 on carbon black or graphite from water is monolayer. For the adsorption from cyclohexane solutions, the ethyleneoxide group of the surfactant molecules may be adsorbed onto the polar spot at the surface of carbon black, and the hydrophobic group of adsorbed molecules may direct toward the liquid phase or attaches to the nonpolar surface region around the polar spot. As the concentration increases, the ethylene oxide groups of the adsorbed molecules can be aggregated with each other via polar interactions to form hemi-reversed micelle.     

Modification of human erythrocyte membrane potentials by the action of the polyoxyethylene detergent Triton X-100

Triton X-100 in sublytic concentrations causes a marked increase in human erythrocyte membrane permeability to cations with small selectivity to K⁺ ions. This membrane permeabilization induces modification of membrane potential: hyperpolarization in low K⁺ media and depolarization in high K⁺ media. Since the specificity of the K⁺-ionophorous action of Triton X-100 is very low in comparison with valinomycin, the membrane potential changes are only in the range of −9 to +5 mV. It is suggested that they are determined by the generation of a diffusion potential across the membrane, although the influence of Triton X-100 on the potentials at cell surfaces cannot be neglected.     

Absorption, fluorescence and resonance Rayleigh scattering spectra of hydrophobic hydrogen bonding of eosin Y/Triton X-100 nanoparticles and their analytical applications

In a weak acidic medium (pH 2.4–2.8), eosin Y molecules (H₂L) could replace water molecules to associate with Triton X-100 to form hydrophobic hydrogen bonding complexes. These complexes could further aggregate to form nanoparticles through the squeezing action of the water phase and Van Der Waals force, resulting in changes in the absorption spectrum and fluorescence quenching of EY as well as the significant enhancement of resonance Rayleigh scattering. This enables the sensitive determination of Triton X-100 using the fading spectrophotometry, fluorescence quenching method and RRS method. Among them, the RRS method shows the highest sensitivity with a detection limit of 20.6 ng mL^?1 for Triton X-100. The optimum experimental conditions and factors that affect the absorption, fluorescence and RRS spectra were tested. The effects of coexisting substances were investigated and the results showed good selectivity. Based on these results, new spectrophotometric methods, fluorescence quenching method and RRS method for the determination of Triton X-100, were established. The hydrogen bonding association of eosin Y with Triton X-100 and the formation of nanoparticles as well as their effects on related spectral characteristics were discussed utilizing infrared, transmission electron microscope technique and quantum chemical method.     

Complexation of serum albumins and triton X-100: Quenching of tryptophan fluorescence and analysis of the rotational diffusion of complexes

The polarized and nonpolarized fluorescence of bovine serum albumin and human serum albumin in Triton X-100 solutions is studied at different pH values. Analysis of the constants of fluorescence quenching for BSA and HSA after adding Triton X-100 and the hydrodynamic radii of BSA/HSA–detergent complexes show that the most effective complexation between both serum albumins and Triton X-100 occurs at pH 5.0, which lies near the isoelectric points of the proteins. Complexation between albumin and Triton X-100 affects the fluorescence of the Trp-214 residing in the hydrophobic pockets of both BSA and HSA.     

Characterization of coal water slurry prepared for PRB coal

Powder River Basin(PRB)coal,which accounts for over 40%of the coal consumed for power generation in the United States,was investigated for preparation of coal water slurry(CWS).The static stability and rheology of the CWS were characterized as a function of loading.The coal loading was varied from 30%to 50%and both ionic(sodium polystyrene sulphonate(PSS))and nonionic(Triton X-100)surfactants were employed as additives.The addition of PSS to PRB slurries was found to yield poor static stability.On the other hand,Triton X-100 was found to be an effective surfactant,reducing the sedimentation by more than 50%compared to the one without surfactant in 45%CWS.Adding Triton X-100 reduces the viscosity of the CWS for coal loadings of30%and 40%.Although the viscosities for coal loading of 42.5%and 45%are higher when Triton X-100 is added,the static stability is significantly better than for samples without surfactant.The highest coal loading for PRB slurry with acceptable viscosity for pumping is 42.5%.     

Interactions of Triton X-100 with sphingomyelin and phosphatidylcholine monolayers: influence of the cholesterol content

The presence of microdomains, called lipid rafts, in biological membranes is usually explained by lateral segregation between specific lipids and proteins. These rafts present similarities with the membrane domains isolated by their non-ionic detergent-resistance at 4 degrees C. They are enriched in sphingomyelin and cholesterol as compared with the outer leaflet of eukaryotic cell membranes. To understand the role played by the lipids enriched in rafts in their resistance to solubilization by detergents, the interactions between these lipids and the non-ionic detergent Triton X-100 were studied by using different lipid monolayers at the air-water interface. The influence of Triton X-100 on the Langmuir isotherms (i.e. surface pressure/area isotherms) of monolayers containing sphingomyelin and cholesterol at different mole ratios was analyzed and the results were compared with the influence of Triton X-100 on monolayers containing a phosphatidylcholine bearing a saturated and an unsaturated fatty acid (i.e. palmitoyloleylphosphatidylcholine) and cholesterol. This phosphatidylcholine was chosen since the phosphatidylcholines present in rafts isolated from bovine kidney could contain about 50% of saturated fatty acids. Triton X-100 induces an increase in the condensing effect observed as compared with ideal mixture of phospholipid/cholesterol. Triton X-100-induced changes in the morphology of the monolayers were visualized by Brewster angle microscopy, which confirmed the differences of behavior observed by analyzing the isotherms.     

Inorganic-organic hybrid nanoparticles from n-octyl triethoxy silane

Ormosil (organically modified silane) such as n-octyl triethoxy silane has been found to aggregate in the form of normal micelles as well as reverse micelles in which the triethoxy silane moeities are hydrolyzed to form a hydrated silica network while the n-octyl groups are held together through hydrophobic interaction. These nanoparticles are spherical in shape and are nearly monodispersed with an average diameter of below 100 nm. The nanoparticles originating from the micellar aggregate have an hydrophobic core with a layer of the hydrated silica network at the surface. The hydrophobic core can host hydrophobic molecules such as tetraphenyl porphyrin, which is leached out of the particles extremely slowly compared to that in Triton X-100 micelles. The nanoparticles originating from the reverse micelles have a hydrated silica network in the core surrounded by the hydrophobic n-octyl chains on the particle surface. The hydrophilic silica cores of these nanoparticles have been used to encapsulate horseradish peroxidase (HRP) and the enzyme shows its activity and follows Michaelis-Menten kinetics.