Relative Stability ofcis andtrans conformers of 2- and 3-fluorostyrene: An ab initio SCF-MO study

Ab initio SCF-MO calculations, mainly at the 6-31G F^* level with 3-21G F^* fully optimized geometries, were performed for 2- and 3-fluorostyrene in different comformations.Structures and conformational preferences of these molecules are compared with available data and discussed. It was found that the 2-fluorostyrene molecule has acis-trans energy difference of ca. 2.4 kJ mol^–1, showing a small barrier to planarity of 0.26 kJ mol^–1 in thetrans form. While the reduced stability of thecis form is mainly ascribed to a repulsive F ... vinyl group interaction, the partial loss of resonance stabilization between the ring and the vinyl group in the trans form and the H₆ ... H_c repulsive interaction in this form are taken to explain the local maximum at=180. In the 3-fluorostyrene molecule, thecis form is favored over thetrans by ca. 0.5 kJ mol^–1. An appreciable asymmetry of charge distribution found for thetrans form is assumed to slightly overweigh the difference in nuclear repulsion energy favorable to this conformation, thus explaining the observed relative stability.     

Preparative electroreduction oftrans-2-allyl-6-methyl(phenyl)-1,2,3,6-tetrahydropyridine

Electrocatalytic hydrogenation oftrans-2-allyl-6-phenyl-1,2,3,6-tetrahydropyridine andtrans-2-allyl-6-methyl-1,2,3,6-tetrahydropyridine in 40% aqueous DMF in the presence of AcOH on a nickel cathode gavetrans-6-phenyl-2-propylpiperidine andtrans-2-methyl-6-propylpiperidine ((±)-epidihydropinidine), respectively. Direct electroreduction oftrans-2-allyl-6-phenyl-1,2,3,6-tetrahydropyridine in anhydrous DMF on a mercury cathode afforded a 7 ∶ 5 mixture oftrans- andcis-2-allyl-6-phenylpiperidine. The structure of the latter compound was confirmed by 2D NOESY spectroscopy. The possible mechanism of formation of thecis-isomer is discussed. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No.4, pp. 758–761, April, 1999.     

A molecular mechanics and semiempirical conformational analysis of the herbicide diuron inhibitor of photosystem II

The potential energy surface (PES) for the herbicide diuron (DCMU), a photosystem II inhibitor, has been extensively investigated using the quantum-mechanical semiempirical molecular orbital methods AM1 and PM3 and molecular mechanics method. A detailed conformational search has been carried out which revealed the occurrence of four genuine minimum energy structures. The relative stability of the conformers and rotational barriers to conformational interconversion were evaluated using distinct theoretical approaches. The results showed that thetrans form of the diuron molecule is more stable than thecis form in all methods, and so it may possibly be the biologically active isomer.     

The Structure and Torsional Dynamics of Two Methyl Groups in 2‐Acetyl‐5‐methylfuran as Observed by Microwave Spectroscopy

The molecular‐beam Fourier transform microwave spectrum of 2‐acetyl‐5‐methylfuran is recorded in the frequency range 2–26.5 GHz. Quantum chemical calculations calculate two conformers with trans or cis configuration of the acetyl group, both of which are assigned in the experimental spectrum. All rotational transitions split into quintets due to the internal rotations of two nonequivalent methyl groups. By using the program XIAM, the experimental spectra can be simulated with standard deviations within the measurement accuracy, and yield well‐determined rotational and internal rotation parameters, inter alia the V₃ potentials. Whereas the V₃ barrier height of the ring‐methyl rotor does not change for the two conformers, that of the acetyl‐methyl rotor differs by about 100 cm^?1. The predicted values from quantum chemistry are only on the correct order of magnitude.     

All-electron SCF LCAO MO calculations on various conformations of cis- and trans-stilbene

Ab initio SCF calculations of cis- and trans-stilbene at different conformations were performed using two program systems. Minimal energy is obtained for cis-stilbene when the phenyl rings are rotated by 52 ° out of the molecular plane. The deviation from planarity due to steric hindrance is smaller for the trans isomer yielding a rotational angle of 19 °. The trans isomer is calculated to be more stable by 5.7 kcal/mole than the cis isomer, confirming the experimental estimate according to which the energy of isomerization is about 3 kcal/mole. This is an improvement over semiempirical calculations which predict a lower energy for the trans configuration.     

Hydrogenation of 2- tert -butylphenol over Ni catalyst

The hydrogenation of 2-tert-butylphenol was studied in regard to possibilities of influencing selectivity, namely the ratio ofcis- andtrans-isomers of 2-tert-butylcyclohexanol in the final reaction mixture. The hydrogenation reactions were carried out using the catalyst Ni/Al₂O₃. During the hydrogenations, a higher content of thecis-isomer was attained, when simultaneously the final reaction mixture contained 2-tert-butylcyclohexanone. The content of this intermediate, which primarily hydrogenated to thecis-isomer, increased with a decreased pressure and after the addition of acetic acid into the reaction mixture.     

Selective formation of thecis isomer of the nitridotechnetium(V) complex with 2,2′:6′,2″-terpyridine

The reaction of [TcNCl₂(PPh₃)₂] with 2,2′:6′,2″-terpyridine producedcis-[TcNCl₂(terpy)] selectively. The resulting complexes were characterized by¹H NMR and IR spectroscopy. The geometries of thecis andtrans isomers were estimated by theoretical calculations following a density functional method. Thecis isomer is likely more stable than thetrans one with respect to thetrans influence of the nitrido ligand. Furthermore, the behavior of nitridotechnetium complexes in polar solvents was compared to Os-analogues.     

Configurational statistics of polyamide chains

The statistical mechanical treatment of polymeric chains in terms of the largest eigenvalue of the product of statistical weight matrices for the rotational interactions of skeletal bonds of the repeat unit becomes excessively complicated if the repeat unit spans more than three or four skeletal bonds. Moreover, such treatment is necessarily limited to chains in which the number of repeat units is indefinitely large. Newer methods are readily applicable to chains of any degree of polymerization comprising repeat units of any realizable length. If interdependence of neighboring bond rotations is confined to bond pairs within a given unit, rotations about a pair of bonds belonging to neighboring units being mutually independent, further simplifications may be introduced without sacrifice of rigor. Polyamides, in which rotation about bonds on opposite sides of the amide group are independent, are polymers of this type. Adherence of the amide group to the planar trans conformation favors a more extended configuration of the chain, but this effect is dominated by the smaller steric repulsions affecting rotations about bonds which are first, second, and third neighbors of the amide group. It is for this reason that the characteristic ratio 〈r²〉₀〉/nl² for poly(hexamethylene adipamide), ca. 6.0 according to experimental results of Saunders, is less than the value, 8.0, for polymethylene at 25°C. The characteristic ratios and molecular dipole moments are computed as functions of the degree of polymerization. The poly(εaminocaproamide) chain also is treated.     

Base hydrolysis of mono-alkylsubstituted chloropentaamminecobalt(III) complexes

Summary The preparation of the series ofcis- andtrans-[Co(NH₃)₄(RNH₂)Cl]²⁺ complexes (withcis, R = Me orn-Pr andtrans, R = Me, Et,n-Pr,n-Bu ori-Bu) is described. The u.v-visible spectra indicate a decrease of the ligand field on increasing chain length. Infrared spectra show an enhanced Co-Cl bond strength compared to the pentaammine. Partial molar volumes of the complex cations do not reveal steric compression. From proton exchange studies in D₂O it follows that [Co(NH₃)₅Cl]²⁺ and thecis- andtrans-[Co(NH₃)₄-(CH₃NH₂)C1]²⁺ complexes exchange the amine protons on the grouptrans to the chloro faster than those on thecis. A coordinated methylamine group exchanges its amine protons slower than a corresponding NH₃ group in the parent pentaammine, but the methyl introduction accelerates the exchange of the other NH₃ groups. The aquation of thetrans-alkylamine complexes (studied at 52° C) is acceleratedca. 10 times compared to the parent pentaammine, irrespective of the nature of the alkyl group. Thecis complexes do not show this acceleration of aquation. In base hydrolysis (studied at 25° C) thecis complexes are the most reactive (a factor 20 over the parent ion). Thecis/trans product ratio in base hydrolysis and the competition ratio in the presence of azide ions were calculated from the 500 MHz¹H n.m.r. spectra, which display distinctly different alkyl resonances for each individual complex. Thecis ions react under stereochemical retention of configuration; thetrans compounds give 10±1%trans tocis rearrangement. The ionic strength (4 mol dm^–3) and the pH do not affect this result. The same product ratio is obtained in methanol-water and DMSO-water mixtures. Ammoniation in liquid ammonia gives the same ratios as in base hydrolysis, base-catalyzed solvolysis in neat methylamine gives stereochemical retention for both thecis- andtrans-methylamine ion. The product competition ratio (Co-N₃)/(Co-OH₂) for thecis compounds and the bulkier amines (R =n- andi-Bu), 15–25% at 1 mol dm^–3N ₃ ^– , isca. twice that of thetrans compounds and the pentaammine. The results are interpreted in the classical conjugate base mechanism, and discussed in the context of current ideas about stereochemistry of base hydrolysis.Prof. C. R. Píriz Mac-Coll from Uruguay is a guest at the Free University of Amsterdam.     

Metal Complexes with Macrocyclic Ligands. Part XXIX.. Structural and kinetic studies of two isomeric Cu2+ complexes with 1,4-dimethyl-8-[2-(2-pyridyl)ethyl]-1,4,8,11-tetraazacyclotetradecane

The synthesis and complexation properties of 1,4-dimethyl-8-[2-(2-pyridyl)ethyl]-1,4,8,11-tetraazacyclotetra-decane ( 2 ) are described. This ligand forms with Cu²⁺ two complexes, one of which has been characterized by X-ray structure analysis. The structural, spectral, and kinetic studies indicate that the two Cu²⁺ complexes are isomers with the macrocycle in the trans-III and trans-I configuration. The rate of the interconversion of the trans-I isomer to the thermodynamically more stable trans-III species is proportional to [OH^?]. A mechanism for this reaction is proposed.     

Theoretical study of bimolecular elimination (E2) reactions. Possibility ofsyn E2 elimination in the series of 2-R-2-R'-1-halocyclopropanes

Reactions of the methoxide ion with substituted halocyclopropanes, which result in E2 elimination, have been studied by the semiempirical quantum-chemical AM1 method. The transition states corresponding totrans andcis routes have been localized. The energetic predominance of thetrans route over thecis route is reduced by 2.6 kcal mol^–1 on going from 1-chloropropane to chlorocyclopropane because of the features of cyclopropane geometry. It has been demonstrated that, in the gas phase,cis elimination may predominate overtrans elimination for a particular stereoisomer of 2-cyano-2-methyl-1-halocyclopropanes due to weakening of orbital interactions and Coulomb repulsion between the cyano group and the MeO^– anion in thetrans E2 transition state.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 620–623, April, 1995.     

Stereoselective H2O eliminations in 3- and 4-arcylcyclohexanols under electron impact

The elimination of H20 from the molecular ions of trans-4- and trans-3-arylcyclohexanois takes place to a greater extent than in the corresponding cis isomers. The remarkable differences in abundance taken together with substituent effects and the results of deuterium labelling, show that configuration is retained in the molecular ions which undergo the elimination, and that this process is a cis-1,4 and cis-1,3 elimination in the trans-4- and trans-3- arylcyclohexanois, respectively. Possible mechanisms for the elimination in the cis isomers are discussed.     

The preparation and characterisation of chromium(III) complexes of C-meso-5, 12-dimethyl-1, 4, 8, 11-tetraazacyclotetradecane (LM). Aquation and base hydrolysis kinetics ofcis- andtrans-[CrLMCl2]+

Summary The reaction of [CrCl₃(DMF)₃] with C-meso-5, 12-dimethyl-1, 4, 8, 11-tetra-azacyclotetradecane(L_M) in DMF gives a mixture ofcis-[CrL_MCl₂]Cl (ca. 90%) andtrans-[CrL_MCl₂]Cl (ca. 10%). These complexes are readily separated, as thecis-isomer is insoluble in warm methanol while thetrans-isomer is soluble. Using the dichlorocomplexes as precursors it has been possible to prepare a range ofcis-[CrL_MX₂]⁺ complexes (X=Br^–, NO ₃ ^– , N ₃ ^– , NCS^– and X₂=bidentate oxalate) and alsotrans-[CrL_MX₂]⁺ complexes (X=Br^–, H₂O or NCS^–). The spectroscopic properties and detailed stereochemistry of the complexes are discussed.The aquation and base hydrolysis kinetics ofcis- andtrans-[CrL_MCl₂]⁺ have been studied at 25° C. Base hydrolysis of thecis-complex is extremely rapid with K_OH =1.46×10⁵ dm³ mol^–1 at 25° C. This unusual reactivity appears to be associated with thetrans II stereochemistry of thesec-NH centres of the macrocycle. Base hydrolysis of thetrans complex with thetrans III chiral nitrogen stereochemistry is quite normal with k_OH =1.1 dm³ mol^–1 s^–1 at 25° C.     

Thecis-trans energy difference in bi-1-cyclopro-pen-1-yl and related compounds

Thecis-trans energy difference of bi-1-cyclopropen-1-yl and the fluorosubstituted derivatives are studied byab initio methods in order to establish the stability of the cis andtrans diene isomers.The results of theab initio method STO-3G points toward thetrans bi-1-cyclopropen-1-yl as the most stable isomer (0.2kcal/mol). The energy of the transition state is about 2.5 kcal/mol above that of thetrans isomer. The electronic transitions of the isomers are also reported.Senior Fullbright-Hays Scholar to Uruguay.     

Arylsulfonylureido- und Arylsulfonylamidoacyl-Derivate von Hydroxy- und Oxocycloalkanen als potentielle Antidiabetica, 2. Mitt.

Zusammenfassung Die Umsetzung vontrans-2-Aminocyclohexanol mit Tosylcarbamoylierungsmitteln führt entweder zu Gemischen vontrans-2-Tosylureidocyclohexanol und N,O-bis-Tosylcarbamoyl-trans-2-aminocyclohexanol oder ausschließlich zum Bisderivat. Vollkommen nebenproduktfreiestrans-2-Tosylureidocyclohexanol erhält man sowohl bei der Hydrolyse des austrans-2-Aminocyclohexanol und Tosyliminodithiokohlensäuremethylester gebildeten Oxazolinderivates als auch bei der Sulfonamidolyse vontrans-2-Äthoxycarbonylaminocyclohexanol.trans-2-Tosylureidocyclohexanol kann auf zwei Wegen in dascis-Isomere umgewandelt werden.

---

Arylsulfonylureido- and arylsulfonylamidoacyl derivatives of hydroxy- and oxocycloalkanes as potential antidiabetic drugs. II.

The reaction oftrans-2-aminocyclohexanol with tosylcarbamoylation reagents yields either mixtures oftrans-2-tosylureidocyclohexanol and N,O-bis-tosylcarbamoyl-trans-2-aminocyclohexanol, or exclusively the bis-derivative.trans-2-tosylureidocyclohexanol is obtained completely free of by-products both by hydrolysis of the oxazoline derivative formed fromtrans-2-aminocyclohexanol and methyl tosyliminodithiocarbonate, and by sulfonamidolysis oftrans-2-ethoxycarbonylaminocyclohexanol.trans-2-Tosylureidocyclohexanol can be converted to thecis-isomer by two routes.

     

Synthesis and polymerization of optically active trans-(R)(–)-5-phenyl-1,3-hexadiene and trans-(R)(–)-6-phenyl-1,3-heptadiene

The monomers trans-(R)(–)-5-phenyl-1,3-hexadiene (I) and trans-(R)(–)-6-phenyl-1,3-heptadiene (II) were prepared by dehydration of (R)(–)-3-acetoxy-5-phenyl-1-hexene and (R)(–)-3-acetoxy-6-phenyl-1-heptene, respectively. Monomers I and II were polymerized in heptane with three catalyst systems: γ-TiCl₃–Al(i-Bu)₃, VCl₃–Alet₃, and nBuLi. Polymers of identical structures were obtained with all three catalysts; according to infrared and NMR spectra, only the 1,4 structure was present. Acetone-insoluble fractions of poly-I and poly-II have higher optical rotations than the corresponding monomers ([M]_D of poly-I, -46.45°, of monomer I, -28.6°: [M]_D of poly-II, -46.8°, of monomer II, -32.55°). There is no difference in the rotation of poly-I and poly-II.     

Kinetics and mechanisms of the reactions of thiosulphato-amine complexes of cobalt(III). Part I. Isomerization and base hydrolysis ofcis andtrans isomers of dithiosulphatobis(ethylenediamine) cobalt(III) ion in aqueous solution

Summary Investigations were carried out on the isomerization and base hydrolysis ofcis andtrans forms of dithiosulphatobis-(ethylenediamine)cobalt(III) ions. Thecis form isomerizes to thetrans form in neutral aqueous medium, rates being 1.15, 2.30 and 4.0×10^–5s^–1, respectively at 42, 50 and 58 °C. Thetrans complex isomerizes to thecis form in basic solution only, the rate varying with pH in a sigmoid pattern. In presence of OH^–, an acid-base equilibrium of the complex ion sets in, but only the basic form takes part in the isomerization reaction. Hydrolysis of thecis isomer proceeds through a base-dependent path only, but that of thetrans isomer proceeds both through base-dependent and base-independent paths. The mechanisms are associative in nature. Thetrans form reacts faster thancis in all cases.     

Die thermische Umlagerung von 2-(Buta-1′,3′-dienyl)-phenolen in 2-Alkyl-2H-chromene; Beispiele für aromatische [1,7a]- und [1,5s]sigmatropische Wasserstoffverschiebungen

2-(1′-cis,3′-cis-)- and 2-(1′-cis,3′-trans-Penta-1′,3′-dienyl)-phenol (cis, cis- 4 and cis, trans- 4 , cf. scheme 1) rearrange thermally at 85–110° via [1,7 a] hydrogen shifts to yield the o-quinomethide 2 (R ? CH₃) which rapidly cyclises to give 2-ethyl-2H-chromene ( 7 ). The trans formation of cis, cis- and cis, trans- 4 into 7 is accompanied by a thermal cis, trans isomerisation of the 3′ double bond in 4. The isomerisation indicates that [1,7 a] hydrogen shifts in 2 compete with the electrocyclic ring closure of 2 . The isomeric phenols, trans, trans- and trans, cis- 4 , are stable at 85–110° but at 190° rearrange also to form 7 . This rearrangement is induced by a thermal cis, trans isomerisation of the 1′ double bond which occurs via [1, 5s] hydrogen shifts. Deuterium labelling experiments show that the chromene 7 is in equilibrium with the o-quinomethide 2 (R ? CH₃), at 210°. Thus, when 2-benzyl-2H-chromene ( 9 ) or 2-(1′-trans,3′-trans,-4′-phenyl-buta1′,3′-dienyl)-phenol (trans, trans- 6 ) is heated in diglyme solution at >200°, an equilibrium mixture of both compounds (～ 55% 9 and 45% 6 ) is obtained.     

Dipole moments of aryl cis - and trans -styryl sulphides and sulphones

The dipole moments of thirteen aryl styryl sulphides and eleven aryl styryl sulphones have been determined. Among them are eightcis-trans isomeric pairs, four sulphides and four sulphones. The styryl group is found to conjugate with the sulphide function as an electron-withdrawing group. The angles which the styrylthio and styrylsulphonyl groups make with their axes of rotation are calculated. The observed dipole moments of the sulphides and sulphones are compared with the moments calculated by the vector addition of group moments. The dipole moments ofcis aryl styryl sulphides and sulphones are found to be generally lower than those of theirtrans isomers. An explanation is offered attributing the cause to sterically enhanced styryl-sulphur conjugation in thecis isomers.     

Intramolecular formation of excimers in model compounds for polyesters obtained from 2,6-naphthalene dicarboxylic acid and cyclohexanediols

The fluorescence in dilute solution has been measured as a function of solvent viscosity for four bichromophoric models for polyesters with naphthalene in the rigid aromatic unit and diols derived from cyclohexane as the flexible spacer. The spacers are 1,2-cis-cyclohexanediol, 1,2-trans-cyclohexanediol, a 1:2 mixture of 1,3-cis- and 1,3-trans-cyclohexanediols, and a 1:2 mixture of 1,4-cis- and 1,4-trans-cyclohexanediols. The shape of the emission spectra for the molecules in this series is less sensitive to the viscosity of the medium than was the case for an analogous series in which a methylene or oxyethylene spacer replaces the cyclohexanediol spacer. The dependence of the excimer emission on the type of spacer is different also in the series in which the rigid units contain naphthalene or benzene. When the rigid units contain naphthalene, excimer formation is maximal if the spacer contains 1,2-trans-cyclohexanediol, but this spacer produces a molecule with a very small tendency for excimer formation in its polymers with terephthalate. A conformational analysis correctly concludes that the spacer most conducive to excimer formation should be 1,2-trans-cyclohexanediol, but it does not identify the correct order of the remaining three bichromophoric model compounds. The problem may reside in the method for taking into account the finite width of the torsional well associated with each rotational isomer. © 1994 John Wiley & Sons, Inc.