Control of regio-, diastereo-, and enantioselectivity in the [Ti(OTs)2(TADDOLato)]-catalyzed 1,3-dipolar cycloaddition reaction between 3-acryloyloxazolidin-2-one and nitrones

Catalytic control of regio-, diastereo-, and enantioselectivity in the 1,3-dipolar cycloaddition of 3-acryl-oyloxazolidin-2-one ( 4 ) with different nitrones 2 by the application of a [TiX₂(TADDOLato)] complex as the catalyst was developed (TADDOL = α,α,α′,α′-tetraaryl-1,3-dioxolane-4,5-dimethanol). In the absence of a catalyst, the 1,3-dipolar cycloaddition of 4 with 2 proceeded to give a mixture of regioisomers, whereas, in the presence of a catalyst, the regioselectivity of the reaction could be controlled. Three asymmetric [TiX₂(TADDOLato)] catalysts were tested, and it was found that use of the [Ti(OTs)₂(TADDOLato)] complex gave complete regioselectivity, high ‘endo’-selectivities (> 90% d.e.), and enantioselectivities corresponding to 48–70% e.e.     

Titanium(IV)-catalyzed enantioselective sulfenylation of beta-ketoesters

A [Ti(TADDOLato)] complex (1) catalyzes the enantioselective sulfenylation of beta-ketoesters using phenylsulfenyl chloride, giving ees of up to 88% and yields of up to 95%. The reaction does not require the presence of a base. [reaction: see text]     

Structural and stereochemical aspects of the enantioselective halogenation of 1,3-dicarbonyl compounds catalyzed by Ti(TADDOLato) complexes

Complexes of the type [Ti(1-Np-TADDOLato)(carbonylenolato)₂] (3a-d), derived from β-keto esters, have been prepared and structurally characterized by NMR and X-ray crystallography. In solution, two main diastereoisomeric forms were identified. In the major C₂-symmetric isomer, the face-on naphthyl group of the (S,S)-TADDOL shields the Si-side of the coordinated enolate. Therefore, electrophilic attack of the halogenating agent can only occur at the Re-side of the substrate. α-Acyl-γ-lactams (4) were fluorinated with NFSI in the presence of the Ti(TADDOLato) catalyst in up to 87% ee. The absolute configuration of one of the products was determined by X-ray crystallography after derivatization. The observed absolute configuration at the fluorinated stereogenic center matches the one inferred from the structural analysis of the Ti(TADDOLato) complexes.     

Catalytic Asymmetric Chlorination of β‐Keto Esters with Hypervalent Iodine Compounds

(Dichloroiodo)toluene (=dichloro(4‐methylphenyl)iodine; 2 ) was found to be a suitable chlorinating agent in the catalytic asymmetric chlorination of β‐keto esters 3 catalyzed by the [Ti(TADDOLato)] complex 1 (=bis(acetonitrile)dichloro[(4R,5R)‐2,2‐dimethyl‐α,α,α′,α′‐tetra(naphthalen‐1‐yl)‐1,3‐dioxolane‐4,5‐dimethanolato(2?)‐κO,κO′]titanium), whereby α‐chlorinated products were obtained in moderate to good yields and enantioselectivities of up to 71% (Scheme 2, Table 2). The enantioselectivity of the reaction shows a remarkable temperature dependence, the maximum selectivity being obtained at ca. 50°.     

Titanium-catalyzed stereoselective geminal heterodihalogenation of beta-ketoesters

[reaction: see text] beta-Ketoesters can be effectively monofluorinated with F-TEDA using CpTiCl(3) as a catalyst. With the use of this catalyst, the extent of the competing difluorination does not reach 10%. [TiCl(2)(TADDOLato)] complexes catalyze the one-pot enantioselective heterodihalogenation of beta-ketoesters with F-TEDA and NCS to afford alpha-chloro-alpha-fluoro-beta-ketoesters in moderate to good yields. The sequence of addition of the halogenating agents determines the sense of chiral induction.     

Phthalimide-N-sulfenyl chloride in the Ti-catalyzed asymmetric sulfenylation of β-keto esters

The enantioselective sulfenylation of β-keto esters was carried out using phthalimide-N-sulfenyl chloride in the presence of a Ti(TADDOLato) catalyst affording up to 60% ee. X-ray crystal structures of product compounds 3a and 9a were determined.     

Synthesis and reactivity of calix[4]arene-supported group 4 imido complexes

New mononuclear titanium and zirconium imido complexes [M(NR)(R'(2)calix)] [M=Ti, R'=Me, R=tBu (1), R=2,6-C(6)H(3)Me(2) (2), R=2,6-C(6)H(3)iPr(2) (3), R=2,4,6-C(6)H(2)Me(3) (4); M=Ti, R'=Bz, R=tBu (5), R=2,6-C(6)H(3)Me(2) (6), R=2,6-C(6)H(3)iPr(2) (7); M=Zr, R'=Me, R=2,6-C(6)H(3)iPr(2) (8)] supported by 1,3-diorganyl ether p-tert-butylcalix[4]arenes (R'(2)calix) were prepared in good yield from the readily available complexes [MCl(2)(Me(2)calix)], [Ti(NR)Cl(2)(py)(3)], and [Ti(NR)Cl(2)(NHMe(2))(2)]. The crystallographically characterised complex [Ti(NtBu)(Me(2)calix)] (1) reacts readily with CO(2), CS(2), and p-tolyl-isocyanate to give the isolated complexes [Ti[N(tBu)C(O)O](Me(2)calix)] (10), [[Ti(mu-O)(Me(2)calix)](2)] (11), [[Ti(mu-S)(Me(2)calix)](2)] (12), and [Ti[N(tBu)C(O)N(-4-C(6)H(4)Me)](Me(2)calix)] (13). In the case of CO(2) and CS(2), the addition of the heterocumulene to the Ti-N multiple bond is followed by a cycloreversion reaction to give the dinuclear complexes 11 and 12. The X-ray structure of 13.4(C(7)H(8)) clearly establishes the N,N'-coordination mode of the ureate ligand in this compound. Complex 1 undergoes tert-butyl/arylamine exchange reactions to form 2, 3, [Ti(N-4-C(6)H(4)Me)(Me(2)calix)] (14), [Ti(N-4-C(6)H(4)Fc)(Me(2)calix)] (15) [Fc=Fe(eta(5)-C(5)H(5))(eta(5)-C(5)H(4))], and [[Ti(Me(2)calix)](2)[mu-(N-4-C(6)H(4))(2)CH(2)]] (16). Reaction of 1 with H(2)O, H(2)S and HCl afforded the compounds [[Ti(mu-O)(Me(2)calix)](2)] (11), [[Ti(mu-S)(Me(2)calix)](2)] (12), and [TiCl(2)(Me(2)calix)] in excellent yields. Furthermore, treatment of 1 with two equivalents of phenols results in the formation of [Ti(O-4-C(6)H(4)R)(2)(Me(2)calix)] (R=Me 17 or tBu 18), [Ti(O-2,6-C(6)H(3)Me(2))(2)(Me(2)calix)] (19) and [Ti(mbmp)(Me(2)calix)] (20; H(2)mbmp=2,2'-methylene-bis(4-methyl-6-tert-butylphenol) or CH(2)([CH(3)][C(4)H(9)]C(6)H(2)-OH)(2)). The bis(phenolate) compounds 17 and 18 with para-substituted phenolate ligands undergo elimination and/or rearrangement reactions in the nonpolar solvents pentane or hexane. The metal-containing products of the elimination reactions are dinuclear complexes [[Ti(O-4-C(6)H(4)R)(Mecalix)](2)] [R=Me (23) or tBu (24)] where Mecalix=monomethyl ether of p-tert-butylcalix[4]arene. The products of the rearrangement reaction are [Ti(O-4-C(6)H(4)Me)(2) (paco-Me(2)calix)] (25) and [Ti(O-4-C(6)H(4)tBu)(2)(paco-Me(2)calix)] (26), in which the metallated calix[4]arene ligand is coordinated in a form reminiscent of the partial cone (paco) conformation of calix[4]arene. In these compounds, one of the methoxy groups is located inside the cavity of the calix[4]arene ligand. The complexes 24, 25 and 26 have been crystallographically characterised. Complexes with sterically more demanding phenolate ligands, namely 19 and 20 and the analogous zirconium complexes [Zr(O-4-C(6)H(4)Me)(2)(Me(2)calix)] (21) and [Zr(O-2,6-C(6)H(3)Me(2))(2)(Me(2)calix)] (22) do not rearrange. Density functional calculations for the model complexes [M(OC(6)H(5))(2)(Me(2)calix)] with the calixarene possessing either cone or partial cone conformations are briefly presented.     

Synthesis and characterisation of new titanium amino-alkoxides: precursors for the formation of TiO2 materials

Reaction of the amino-alkoxides HOCH(CH(2)NMe(2))(2) (Hbdmap) and HOC(CH(2)NMe(2))(3) (Htdmap) with [Ti(OR)(4)] yields a series of heteroleptic titanium alkoxides [Ti(OR)(4-n)(L)(n)] (L = bdmap, tdmap). Substitution of the monodentate alkoxide with the chelating alkoxides becomes progressively more difficult, with homogeneous products being obtained only for n = 1, 2. The structure of [Ti(OEt)(3)(bdmap)](2), a mu-OEt bridged dimer, has been determined. Hydrolysis of [Ti(OR)(2)(L)(2)], by adventitious moisture affords the dimeric oxo-alkoxides [Ti(O)(L)(2)](2), both of which have been characterised crystallographically. These two compounds have also been prepared by reaction of [Ti(NMe(2))(2)(L)(2)] with the hydrated metal salts [Zn(acac)(2).2H(2)O] and [Zn(OAc)(2).2H(2)O] using the intrinsic water molecules in these salts to react with the labile amido groups, though the former also produces Me(Me(2)N)C=C(H)C(O)Me from reaction of liberated HNMe(2) with the coordinated acac ligand, while the latter also affords the ligand exchange product [Zn(OAc)(bdmap)]. In neither case does the free dimethylamino group of [Ti(O)(L)(2)](2) coordinate a second metal. The dimeric structure of [Zn(OAc)(bdmap)](2) has been established, and the structure of the tetrameric oxo-alkoxide [Ti(O)(OPr(i))(OCH(2)CH(2)NMe(2))](4) is reported for comparison with others in this study. [Ti(OEt)(3)(bdmap)](2) has been used as a precursor in AACVD (Aerosol-Assisted Chemical Vapour Deposition) to generate amorphous TiO(2) films on glass at 440 degrees C, and TiO(2)@C nanoparticles of approximate diameter 350 nm with a carbon coating of width ca. 75 nm on heating in a sealed container at 700 degrees C.     

Extending the family of titanium heterometallic-oxo-alkoxy cages

Here we investigate the synthesis of high-nuclearity heterometallic titanium oxo-alkoxy cages using the reactions of metal chlorides with [Ti(OEt)(4)] or the pre-formed homometallic titanium-oxo-alkoxy cage [Ti(7)O(4)(OEt)(20)] (A). The octanuclear Ti(7)Co(II) cage [Ti(7)CoO(5)(OEt)(19)Cl] (1) (whose low-yielding synthesis we reported earlier) can be made in better yield, reproducibly by the reaction of a mixture of heptanuclear [Ti(7)O(4)(OEt)(20)] (A) and [KOEt] with [Co(II)Cl(2)] in toluene. A alone reacts with [Co(II)Cl(2)] and [Fe(II)Cl(2)] to form [Ti(7)Co(II)O(5)(OEt)(18)Cl(2)] (2) and [Ti(7)Fe(II)O(5)(OEt)(18)Cl(2)] (3), respectively. Like 1, compounds 2 and 3 retain the original Ti(7) fragment of A and the II-oxidation state of the transition metal ions (Tm). In contrast, from the reaction of [Ti(OEt)(4)] with [Cr(II)Cl(2)] it is possible to isolate [Ti(3)Cr(V)O(OEt)(14)Cl] (4) in low yield, containing a Ti(3)Cr(V) core in which oxidation of Cr from the II to V oxidation state has occurred. Reaction of [Mo(V)Cl(5)] with [Ti(OEt)](4) in [EtOH] gives the Ti(8)Mo(V)(4) cage [{Ti(4)Mo(2)O(8)(OEt)(10)}(2)] (5). The single-crystal X-ray structures of the new cages 2, 3, 4, and 5 are reported. The results show that the size of the heterometallic cage formed can be influenced by the nuclearity of the precursor. In the case of 5, the presence of homometallic Mo-Mo bonding also appears to be a significant factor in the final structure.     

Synthesis and characterization of a series of rubidium alkoxides and rubidium-titanium double alkoxides

This report investigates the structural aspects of the products isolated from the reactions of a series of titanium alkoxides [[Ti(OR)4]n n = 2, OR = OCH2C(CH3)3 (ONep) (1); n = 1, OC6H3(CH3)2-2,6 (DMP) (2)] with rubidium alkoxides [[Rb(OR)]infinity where OR = (ONep) (3), (DMP) (4), and OC6H3(CH(CH3)2)2-2,6 (DIP) (5)]. The resultant double alkoxides were determined by single crystal X-ray diffraction to be [Rb(mu-ONep)4(py)Ti(ONep)]2 (6), [Rb(mu-DMP)Ti(DMP)4]infinity (7), and [Rb(mu-DMP)2(mu-ONep)2Ti(ONep)]infinity (8). Compound 1 is the previously reported dinculear species with trigonal bipyramidal Ti metal centers whereas compound 2 is a monomer with a tetrahedral Ti center. Suitable X-ray quality crystals of 3 were not isolated. Compounds 4 and 5 demonstrate extended polymeric networks with Rb coordination ranging from two to five utilizing terminal mu- and mu3-OR ligands and pi-interactions of neighboring OAr ligands. The double alkoxide 6 revealed a simple tetranuclear structure with mu-ONep acting as the bridge, terminal ONep ligands on the Ti, and one terminal py on the Rb. For 7 and 8, the pi-interaction facilitated the formation of extended polymeric systems. All complexes were further characterized by FT-IR and multinuclear NMR spectroscopy.     

Polymerization of ethylene catalyzed by titanocene(iii) -b-diketonate complex and MMAO

Ethylene polymerizations were performed with a catalytic system composed of titanocene(III)-β-diketonate complex such as [Cp2Ti(III)(1-benzoylacetonato)] or [Cp2Ti(III)(dibenzoylmethanato)] and MMAO. These catalysts are active for the polymerization of ethylene to give high-density polyethylene with high molecular weight. This revised version was published online in June 2006 with corrections to the Cover Date.     

Metallosupramolecular chemistry with bis(benzene-o-dithiolato) ligands

The bis(benzene-o-dithiol) ligands H(4)-1, H(4)-2, and H(4)-3 react with [Ti(OC(2)H(5))(4)] to give dinuclear triple-stranded helicates [Ti(2)L(3)](4)(-) (L = 1(4)(-), 2(4)(-), 3(4)(-)). NMR spectroscopic investigations revealed that the complex anions possess C(3) symmetry in solution. A crystal structure analysis for (PNP)(4)[Ti(2)(2)(3)] ((PNP)(4)[14]) confirmed the C(3) symmetry for the complex anion in the solid state. The complex anion in Li(PNP)(3)[Ti(2)(1)(3)] (Li(PNP)(3)[13]) does not exhibit C(3) symmetry in the solid state due to the formation of polymeric chains of lithium bridged complex anions. Complexes [13](4)(-) and [14](4)(-) were obtained as racemic mixtures of the Delta,Delta and Lambda,Lambda isomers. In contrast to that, complex (PNP)(4)[Ti(2)(3)(3)] ((PNP)(4)[15]) with the enantiomerically pure chiral ligand 3(4)(-) shows a strong Cotton effect in the CD spectrum, indicating that the chirality of the ligands leads to the formation of chiral metal centers. The o-phenylene diamine bridged bis(benzene-o-dithiol) ligand H(4)-4 reacts with Ti(4+) to give the dinuclear double-stranded complex Li(2)[Ti(2)(4)(2)(mu-OCH(3))(2)] containing two bridging methoxy ligands between the metal centers. The crystal structure analysis and the (1)H NMR spectrum of (Ph(4)As)(2)[Ti(2)(4)(2)(mu-OCH(3))(2)] ((Ph(4)As)(2)[(16]) reveal C(2) symmetry for the anion [Ti(2)(4)(2)(mu-OCH(3))(2)](2)(-). For a comparative study the dicatechol ligand H(4)-5, containing the same o-phenylene diamine bridging group as the bis(benzene-o-dithiol) ligands H(4)-4, was prepared and reacted with [TiO(acac)(2)] to give the dinuclear complex anion [Ti(2)(5)(2)(mu-OCH(3))(2)](2)(-). The molecular structure of (PNP)(2)[Ti(2)(5)(2)(mu-OCH(3))(2)] ((PNP)(2)[17]) contains a complex anion which is similar to [16](2)(-), with the exception that strong N-H...O hydrogen bonds are formed in complex anion [17](2)(-), while N-H...S hydrogen bonds are absent in complex anion [16](2)(-).     

Defect models of the three trigonal Ti3+ centers in LiF:Ti3+ and LiF:Ti3+:Mg2+ crystals

The EPR g factors of the trigonal Ti3+ center A in LiF:Ti3+ and two additional trigonal Ti3+ centers B and C in LiF:Ti3+:Mg2+ crystals are calculated from the third-order perturbation formulas based on the cluster approach. From the calculations and by considering the Ti3+ displacement along 111 axis obtained by ENDOR experiment, the defect models for the three Ti3+ centers are suggested. For center A, there are two possible models: (i) [Ti3+F3-O3(2-)] cluster and (ii) [Ti3+F6-] cluster with the Ti3+ off-center caused by a neighboring Li+ vacancy (VLi+) at <111> axis. The latter seems the more likely. The defect models of centers B and C are the [Ti3+F3-O(3)2-] clusters associated with a neighboring: Mg2+ ion at the Li+ site along 111 axis in the vicinity of three F- ions and three O2- ions, respectively. The reasonableness of these models is discussed.     

A chloro-bridged dimanganese complex and an oxo-bridged dititanium complex of a ditopic bis(pyrazol-1-yl)borate ligand

The synthesis and crystal structure analysis of the ditopic p-phenylene-bridged bis(pyrazol-1-yl)borate [[p-C6H4(Bpz2tBu)2]Li2] (LLi2; pz=pyrazol-1-yl) is described. A salt metathesis reaction between LLi2 and MnCl2 in THF leads to the dinuclear complex [L[Mn(THF)]2(mu-Cl)2] featuring a central diamond MnII-(mu-Cl)2-MnII core (X-ray crystal structure analysis). Treatment of LLi2 with 2 equiv of [Ti(NMe2)3Cl] gives the dinuclear titanium compound [L[Ti(NMe2)3]2]. Upon reaction of LLi2 with [Ti(NMe2)2Cl2] and water, the mu-oxo-bridged dititanium species [L[Ti(NMe2)Cl]2(mu-O)] is obtained in excellent yield (X-ray crystal structure analysis).     

Synthesis, structure, and reactivity of Group 4 metallacycles incorporating a Me2C-linked cyclopentadienyl-carboranyl ligand

Group 4 metallacycles [eta5:sigma-Me2C(C5H4)(C2B10H10)]Ti[eta2-N(Me)CH2CH2N(Me)] (1a), [eta5:sigma-Me2C(C5H4)(C2B10H10)]Zr[eta2-N(Me)CH2CH2N(Me)](HNMe2) (1b) and [eta5:sigma-Me2C(C5H4)(C2B10H10)]M[eta2-N(Me)CH2CH2CH2N(Me)] (M = Ti (2a), Zr (2b), Hf (2c)) were synthesized by reaction of [eta5:sigma-Me2C(C5H4)(C2B10H10)]M(NMe2)(2) (M = Ti, Zr, Hf) with MeNH(CH2)(n)NHMe (n = 2, 3). These metal complexes reacted with unsaturated molecules such as 2,6-Me2C6H3NC, PhNCO and PhCN to give exclusively M-N bond insertion products. The M-C(cage) bond remained intact. Such a preference of M-N over M-C(cage) insertion is suggested to most likely be governed by steric factors, and the mobility of the migratory groups plays no obvious role in the reactions. This work also shows that the insertion of unsaturated molecules into the metallacycles is a useful and effective method for the construction of very large ring systems.     

Terminal Alkynes in the Coordination Sphere of Titanocene Complexes – Elementary Steps in Catalytic Dimerizations and Oligomerizations of Alkynes

The titanocene acetylene complex [Cp*₂Ti(η²-Me₃SiC≡CSiMe₃)] ( 14 ) reacts with 1-alkynes such as phenylacetylene ( 15 a ), 1-hexyne ( 15 b ), 1-dodecyne ( 15 c ) and trimethylsilylacetylene ( 15 d ) by ligand exchange and proton shift, to yield exclusively the 1-alkenyltitanocene acetylides [Cp*₂Ti(CH=CHR)(C≡CR)] ( 21 ) (R = Ph ( 21 a ), CH₃(CH₂)₃ ( 21 b ), CH₃(CH₂)₉ ( 21 c ), SiMe₃ ( 21 d )). The X-ray structure of 21 a is presented. In reaction of acetylene HC≡CH ( 15 e ) with 14 other products are formed. However, no intermediates, like [Cp*₂Ti(η²-RC≡CH)] ( 17 ), [Cp*₂Ti(H)C≡CR] ( 17 ) or [Cp*₂Ti=C=CHR] ( 22 ) in reactions of 14 with 15 are detectable. On the other hand, a stable titanocenehydride [Cp*₂Ti(H)OCH₃] ( 23 ) is obtained by oxidative addition of CH₃OH with Cp*₂Ti, generated from 14 .     

Titanium imido complexes of cyclooctatetraenyl ligands

Reaction of [Ti(NR)Cl2(py)3] (R=tBu or 2,6-iPr2C6H3) with K(2)[COT] (COT=C8H8) or Li2[COT'] (COT'=1,4-C8H6(SiMe3)2) gave the monomeric complexes [Ti(NR)(eta8-COT)] or [Ti(NR)(eta8-COT')], respectively. The pseudo-two coordinate, "pogo stick" geometry for these complexes is unique in both early transition-metal and cyclooctatetraenyl ligand chemistry. In contrast, reaction of [Ti(N-2,6-Me2C6H3)Cl2(py)3] with K2[COT] gave the mu-imido-bridged dimer [Ti2(mu-N-2,6-Me2C6H3)2(eta8-COT)2]. It appears that as the steric bulk of the imido and C8 ring substituents are decreased, dimerisation becomes more favourable. Aryl imido COT complexes were also prepared by imido ligand exchange reactions between anilines and [Ti(NtBu)(eta(8)-COT)] or [Ti(NtBu)(eta(8)-COT')]. The complexes [Ti(NtBu)(eta(8)-COT)], [Ti(N-2,6-iPr2C6H3)2(eta8-COT)] and [Ti2(mu-N-2,6-Me2C6H3)2(eta8-COT)2] have been crystallographically characterised. The electronic structures of both the monomeric and dimeric complexes have been investigated by using density functional theory (DFT) calculations and gas-phase photoelectron spectroscopy. The most striking aspect of the bonding is that binding to the imido nitrogen atom is primarily through sigma and pi interactions, whereas that to the COT or COT' ring is almost exclusively through delta symmetry orbitals. A DFT-based comparison between the bonding in [Ti(NtBu)(eta8-COT)] and the bonding in the previously reported late transition-metal "pogo stick"complexes [Os(NtBu)(eta6-C6Me6)], [Ir(NtBu)(eta5-C5Me5)] and [Ni(NO)(eta5-C5H5)] has also been undertaken.     

Syntheses, structure, and reactivity of chiral titanium compounds: procatalysts for olefin polymerization

Titanium complexes with chelating alkoxo ligands have been synthesised with the aim to investigate titanium active centres in catalytic ethylene polymerisation. The titanium complexes cis-[TiCl2(eta2-maltolato)2] (1, 89%), and cis-[TiCl2(eta2-guaiacolato)2] (2, 80%) were prepared by direct reaction of TiCl4 with maltol and guaiacol in toluene. The addition of maltol to [Ti(OiPr)4] in THF results in the formation of species [Ti(OiPr)2(maltolato)2] (3, 82%). The titanium compound cis-[Ti(OEt)2(eta2-maltolato)2] (4, 74%) was obtained by the transesterification reaction of species 3 with CH3CO2Et. When compound 4 is dissolved in THF a dinuclear species [Ti2(mu-OEt)2(OEt)4-(eta2-maltolato)2] (5, 45%) is formed. Reaction of [Ti(OiPr)4] with crude guaiacol in THF yields a solid, which after recrystallisation from acetonitrile gives [Ti4(mu-O)4(eta2-guaiacolato)] x 4CH3CN (6, 55%). In contrast, reaction of TiCl4 with crude guaiacol in tetrahydrofuran affords [Ti2(mu-O)Cl2(eta2-guaiacolato)4] (7, 82%). Crystallographic and electrochemical analyses of these complexes demonstrate that maltolato and guaiacolato ligands can be used as a valuable alternative for the cyclopentadienyl ring. These complexes have been shown to be active catalysts upon combination with the appropriate activator.     

Terminal titanium-ligand multiple bonds. Cleavages of C=O and C=S double bonds with Ti imido complexes

Treatment of (t-)BuN=TiCl(2)Py(3) with 2 equiv lithium ketiminate compound, Li[OCMeCHCMeN(Ar)] (where Ar = 2,6-diisopropylphenyl), in toluene at room temperature gave (t-)BuN=Ti[OCMeCHCMeN(Ar)](2) (1) in high yield. The reaction of 1 with phenyl isocyanate at room-temperature resulted in imido ligand exchange producing PhN=Ti[OCMeCHCMeN(Ar)](2) (2). Compound 1 decomposed at 90 degrees C to form a terminal titanium oxo compound O=Ti[OCMeCHCMeN(Ar)](2) (3) and (t-)BuNHCMeCHCMeNAr (4). Also, the compound 3 could be obtained by reacting 1 with CO(2) under mild condition. Similarly, while 1 reacts with an excess of carbon disulfide, a novel terminal titanium sulfido compound S=Ti[OCMeCHCMeN(Ar)](2) (5) was formed via a C=S bond breaking reaction. A novel titanium isocyanate compound Ti[OCMeCHCMeN(Ar)](2)(NCO)(OEt) (6) was formed on heating 1 with 1 equiv of urethane, H(2)NCOOEt. Compounds 1-6 have been characterized by (1)H and (13)C NMR spectroscopies. The molecular structures of 1, 3, 5, and 6 were determined by single-crystal X-ray diffraction. A theoretical calculation predicted that the cleavage of the C-S double bonds for carbon disulfide with the Ti=N bond of compound 1 was estimated at ca. 21.8 kcal.mol(-1) exothermic.     

Mono- and dinuclear complexes of sulfones with the tetrachlorides of group 4

The reactions of dialkyl sulfones [R(2)SO(2): R = Me, Et, Ph, R(2)=-(CH(2))(4)-] with the metal tetrachlorides of Group 4 [MCl(4): M = Ti, Zr, Hf] give different products mainly depending on the sulfone/M molar ratio. Compounds of formula [M(2)Cl(8)(R(2)SO(2))(2)][M = Ti, R(2)=-(CH(2))(4)-; M = Zr, R = Et, R = Ph] and [MCl(4)(R(2)SO(2))(2)](sulfone/M = 2)[M = Ti, R = Me; M = Zr, R = Me, R = Ph, R(2)=-(CH(2))(4)-; M = Hf, R = Me, R(2)=-(CH(2))(4)-] have been obtained. By X-ray diffraction methods the dinuclear titanium and zirconium adducts, [Ti(2)Cl(8)(mu-sulfolane-O,O')(2)] and [Zr(2)Cl(8)(mu-Ph(2)SO(2)-O,O')(2)] have been established to contain bridging sulfone and hexacoordinated metal centres, while the mononuclear zirconium complex [ZrCl(4)(Me(2)SO(2))(2)] has cis-monodentate sulfones in a slightly distorted octahedral geometry. The reaction between TiCl(4) and sulfolane (tetrahydrothiophene 1,1-dioxide) in SOCl(2) affords the 1:1 adduct independent of the sulfone/Ti molar ratio. Ligand-exchange and inter-conversion between mononuclear and dinuclear species have been observed by NMR, while the spectral features of the SO(2) moiety have been assigned by IR- and Raman spectroscopies.