Numerical simulation of thin airfoil stall by using a modified DES approach

The detached‐Eddy simulation (DES) method was applied to calculate pre‐ and post‐stall aerodynamic characteristics of airfoil stall. A discrepancy between numerical and experimental data was observed near the stall regime for the airfoil NACA64_A‐ 006 which is a thin airfoil stall type. The reason of this discrepancy and one possible way for improvement of the numerical model are discussed here. It is shown that the use of the Baldwin–Lomax model in the RANS region improves the DES results in this case. If the relevant factors (grid density, time step, turbulence model, etc.) are appropriately taken into account, the DES approach could reliably predict stall aerodynamical characteristics. Copyright © 2006 John Wiley & Sons, Ltd.     

基于数字散斑相关实验测量的材料构型力的计算方法

材料构型力学主要研究材料中的缺陷(夹杂、空穴、位错、裂纹、塑性区等)的构型(形状、尺寸和位置)改变时,所引起的系统自由能的变化。本研究将基于数字散斑相关技术,实验测量材料试件的位移场分布,随后通过材料构型力的定义式,计算求得弹塑性材料中缺陷构型力的分布。其方法概括如下:位移场通过数字图像相关技术测得;应变及位移梯度场利用三次样条拟合获得;线弹性材料应力通过简单线弹性本构方程获取,而塑性材料的表面应力场通过Ramberg-Osgood本构方程计算求得;弹塑性应变能密度分布则由应力-应变曲线数值积分获得。该方法对普通弹性材料或者弹塑性材料均适用,可以用于各种不同的缺陷及缺陷群的材料构型力测量。     

Spontaneous liquid uplift in biliquid capillary siphons

This technical note describes the spontaneous liquid uplift in biliquid capillary siphons. It was found that, in general, liquids that have a low surface tension to wet the wick material and a low viscosity (methanol, etc.) could be spontaneously uplifted to liquids with a high surface tension (water, etc.) or high viscosity (glycerin, etc.) through a wick configured in a siphon fashion. An interpretation of the results using the liquid capillary rise equations is given.     

考虑损伤的节理本构模型

本文在弹塑性损伤的理论框架内，讨论了节理等地质间断面的本构模型。这个模型能够反映节理面的损伤弱化，扩容和弹性刚度劣化等复杂特性。这个模型的另一优点是，塑性变形增量与屈服面是非正交的，但本构矩阵具有对称性。这种对称性在岩石力学的理论研究和数值分析中是至关紧要的。     

民用飞机发动机吊挂静力试验技术研究

根据民用飞机发动机吊挂部段静力试验技术需求,研制了一套用于吊挂部段静力试验的试验系统,解决了吊挂支持模拟、加载边界模拟等关键技术;采用载荷偏移与力偶施加相结合的方法施加力矩;设计了加载杠杆施加试验小载荷.顺利完成了吊挂应急着陆、航向侧移相关的三种危险工况试验.试验结果表明,试验系统工作稳定可靠,吊挂在应急着陆等工况下未发生有害塑性变形,其强度、刚度满足设计要求.试验结果可作为该吊挂部段强度、刚度性能的评定依据,同时为有限元建模提供数据支持.     

含偏置裂纹三点弯曲梁的动态断裂行为研究

采用动态焦散线方法，对含偏置裂纹三点弯曲梁承受横向冲击的弯曲断裂行为进行了一系列动态断裂力学实验研究，分析了无量纲量ａ／ｌ的改变（ａ——初始裂纹偏离梁中心线的距离；ｌ——梁长度的一半）对于裂纹动态扩展行为（裂纹起始状态、裂纹尖端的复合应力强度因子、裂纹扩展速度、裂纹扩展轨迹）的影响，并借助动态光弹性应力分析，对应力波与扩展裂纹的相互作用以及应力波传播规律进行探讨．给出了裂纹尖端复合应力强度因子、裂纹扩展速度的变化、裂纹曲裂轨迹以及方向与梁中应力波传播的相互关系     

An instrumented vehicle for offroad dynamics testing

The paper presents an instrumented vehicle that was equipped with measuring systems to perform complete dynamics tests, especially in off-road conditions. The equipment consists of four wheel dynamometers, a steering robot, and a differential GPS system together with an inertial platform, a non-contact vehicle speed sensor, and an on-board computer with software to control the devices and collect experimental data. The four wheel dynamometers measure six elements; based on strain gage force transducers, it measures three orthogonal forces and three moments. The steering robot can control the steering wheel of the vehicle at a variety of excitation modes; it can carry out typical vehicle dynamics tests (ISO 7401, ISO 4138, ISO/TR3888, etc.) as well as custom engineered tests at a wide range of setting parameters (steer angle rate up to 1600 deg/s). The differential GPS system gives true time vehicle kinematics data (velocities, accelerations, angles, etc.) at 10-ns sample rate and 20-mm accuracy. The base vehicle, a Suzuki Vitara 4 × 4, required no special modifications or changes to install the measuring equipment. The paper also describes typical tests performed with the use of the instrumented vehicle together with sample results.     

Generalized Cole-Cole behavior and its rheological relevance

Starting from an analysis of the rheological behavior of the complex modulus predicted by the Cole-Cole formalism, a generalized Cole-Cole ansatz is suggested in order to overcome the related difficulties. The corresponding rheological constitutive equation with fractional derivatives belonging to the generalized Cole-Cole respondance is stated and the characteristic material functions of the linear viscoelasticity theory (like the dynamic modulus and compliance, the relaxation and ratardation functions, the spectra, etc.) are derived. Model predictions of these functions will be compared with experimental results from dynamical measurements and creep data on different polymer systems which show cooperative phenomena (polymeric glasses and gelling systems). One can see that the modified ansatz fits the data very well, in spite of its relative simplicity.     

????????????????????????????

将不同模量管材包裹下的轴压混凝土圆柱构件内部混凝土看作由骨料、砂浆骨料过渡层、砂浆组成的三相复合材料,利用骨料随机投放程序确定骨料在试件中的随机位置,并考虑各相材料的弹塑性性质,建立了构件的三维非线性细观分析模型。通过对不同模量管材(PE、HDPE、PVC、钢)包裹下的轴压混凝土圆柱的内部细观力学性能进行分析,探讨不同材料外包下轴压混凝土柱破坏的开展与其内部各种材料（如骨料、过渡层、砂浆等）及外部包裹材料的细观受力状况的关系。     

Dynamic model of crop growth system and numerical simulation of crop growth process under the multi-environment external force action

IntroductionAccordingtobiomechanics,thegrowthsystemoffarmlandcropistheartificiallyecologicalsystemthatchangestheenvironmentalresourcefactors(light,temperature,soilwaterandcarbondioxideetc .)intothefarmlandprimaryproductivity .Thesystemisactedbytheexternalforcevariablesofenvironment,inabroadsense,whichincludeslightintensity ,thetemperaturemaintenanceaction ,soilwater,andtheeffectiveuserateofnutrientsetc.Withinsystemisalsoactedbybiologicalvariableswhichincludethecropleafindex ,rootvolume ,biomas…     

正交切削过程的刚塑性有限元算法及其实现

对刚塑性有限元用于正交切削分析中的切屑与基体材料分离准则、切屑与前刀面脱离判据等关键技术问题进行了系统的研究;建立了求解该问题的刚塑性有限元基本方程,给出了单元刚度矩阵和节点载荷列阵的详细算法以及金属大变形过程中网格畸变问题的处理技术。利用自行开发的正交切削模拟计算程序,对铝合金ZL-301创削过程进行了全程模拟,计算结果与试验结果吻合。     

纤维增强复合材料的破坏机理

纤维增强复合材料本身是一个非均匀各向异性力学结构。复合材料的研制、设计和使用都与力学密切相关。复合材料的破坏机理比金属材料复杂,不同组分的构成使其在加工中存在和使用中带来的缺陷比金属多。它的破坏机理与纤维、基体组分的性能,粘结强度,纤维铺设方向和顺序,工作条件等有关。需要采用有效的试验和分析方法,研究复合材料在不同      

A macroscopic model for plastic flow in metal-matrix composites

A micromechanically based continuum model is developed to analyze the enhancement of plastic properties of particulate-reinforced metal-matrix composites over matrix materials. The composite is idealized as uniformly distributed periodic arrays of unit cells. Each unit cell consists of a rigid inclusion surrounded by a plastically deforming material. An energy method is adopted to obtain the overall constitutive relation for the composite on the basis of the local nonuniform deformation fields. Effects of particle volume fractions and shapes (e.g. whiskers, discs, etc.) as well as the matrix properties on the flow properties of the composite are obtained. The results are in good agreement with experimental observations and finite element analyses found in the literature. An explicit expression is also proposed, providing a means for evaluating various factors affecting the strength of composites.     

Acoustic emissions from reinforced concrete

Acoustic emissions from reinforced-concrete beams, reinforcing bars and plain concrete cylinders were monitored. Acoustic-emission events were used in a study of source locations, frequency characteristics, and other analytical methods that have found use in the past for evaluating acoustic-emission data in other fields of engineering. Tests were done on reinforced-concrete beams under flexural loading, individual reinforcing bars under pure tension, concrete cylinders under compression, and reinforcing bars subject to pullout tests.The experimental data were first analyzed with conventional acoustic-emission methodology. A critical look at many acoustic-emission techniques currently used in other materials (metals, composites, etc.) demonstrated some of the difficulties of applying the same techniques to reinforced concrete. More importantly, it illustrated the limitations of signal processing and parameter estimation of acoustic-emission events as viable nondestructive-evaluation (NDE) techniques for reinforced-concrete structures. Subsequently, on the basis of the experimental results, some of the more promising aspects of developing acoustic emission into a structural monitoring tool are discussed.     

DISCUSSION ON THE APPLICATION OF NUMERICAL EXPERIMENT IN EXPERIMENTAL TEACHING OF FLUID MECHANICS

为强化学生对流体力学课程理论知识及实验教学环节的掌握,本文针对传统实验教学过程中受限于硬件设施、模型等问题,将数值模拟技术与流体力学实验教学相结合。以伯努利实验为例,应用数值模拟软件进行物理建模、网格划分、变参数数值模拟等实验内容,通过压力云图、流线等模拟结果对能量转换特性进行了分析,增强了学生对流体力学理论知识及相关参数的物理意义、变化特征等的理解,使学生在实验中产生强烈的“参与感”,有效地提高了教学水平和教学质量。     

Some problems of turbulent electrohydrodynamic jets

The problem of an axisymmetric turbulent electrohydrodynamic jet exhausting from a nozzle into an interelectrode gap is formulated. A numerical method of integrating the system of equations describing this flow is developed. This method is used to investigate three-dimensional effects in the jet (expansion of the jet, reverse flows). The influence on the jet characteristics (currents of the charge carried out of the nozzle, jet diameter, etc.) of the geometrical and electrical parameters and also of purely hydrodynamic factors (level of turbulence, relative velocity of parallel flow, etc.) is investigated.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 144–149, September–October, 1980.     

Micromechanisms of deformation and fracture of polypropylene nonwoven fabrics

The micromechanisms of deformation and fracture in tension were analyzed in a commercial polypropylene nonwoven geotextile material in a wide range of strain rates. Two different loading scenarios (smooth and notched specimens) were considered to study how these mechanisms are modified in presence of a stress concentration. The nonwoven fabric presented significant deformability and energy-absorption capability, which decreased with the strain rate, together with a high level of strength, which increased with strain rate. In addition, the material was notch-insensitive as the stress concentration around the crack tip was relieved by marked nonlinear behavior, which induced crack blunting. Different experimental techniques (standard mechanical tests, in situ testing within the scanning electron microscope, digital image correlation, etc.) were used to establish the sequence of deformation and failure processes and to link these micromechanisms with the macroscopic behavior.     

Memory decay rates of viscoelastic solids: not too slow, but not too fast either

Fading memory is a distinguishing characteristic of viscoelastic solids. Its assessment is often achieved by measuring the stress due to harmonic strain histories at different frequencies: from the experimental point of view, the storage and loss moduli are, hence, introduced. On the other side, the mathematical modeling of viscoelastic materials is usually based on the consideration of a kernel function whose decay rate is sufficiently fast. For several different solid materials, we have collated experimental evidence showing an high sensitivity to frequency variations of both the storage and loss moduli. By contrast, we prove that the commonly employed viscoelastic kernels (Prony series, continuous kernel, etc.) cannot reproduce this experimental behavior, as the resulting frequency sensitivity of the storage modulus is always zero when assessed at low frequency. This leads to identification problems of the material parameters which are strongly ill conditioned. However, we identify the specific kernel property which is responsible for this misbehavior: the long-term material memory must not decrease too fast. Some viscoelastic kernels, showing the correct memory??s rate of decay, are introduced and their improved ability to match the experimental data analyzed.     

体育场环状悬挑屋盖脉动风压数值模拟

本文提出了预测悬挑屋盖上脉动风压的实用方法,用数值模拟中稳态计算得到的平均压力、平均速度和湍动能的分布计算大跨屋盖的脉动风压。以昆山体育场为例,通过数值模拟的平均压力系数、湍动能分布及脉动风压与风洞实验结果的比较,验证了用数值模拟方法预测环状悬挑屋盖脉动风压的有效性,并建议了需选用的合适湍流模型和参考点的风速。     

烧蚀模式激光推进的数值模拟

采用针对高温气体（等离子体）电离度的一种近似计算方法，以及具有五阶精度的广义Godunov差分格式-加权本质无振荡格式WENO（weighted essentially non-oscillatory schemes），给出了高温气体状态方程的简便描述，并考虑激光与等离子体的相互作用，模拟了强激光与固体靶相互作用时激光支持靶面等离子体流场的动态物理过程，并给出了不同参数条件下激光烧蚀固体靶的推进效应参数（冲量耦合系数等）。计算结果及与实验结果的对比表明，靶材料和激光参数（功率密度、波长、脉冲宽度等）是影响推进效应的主要因素，并且计算结果具有较高的精确度。