PEO/fatty acid blends for thermal energy storage materials. Structural/morphological features and hydrogen interactions

Application of poly(ethylene oxide)-based materials as efficient thermal energy storage systems requires understanding of structural and morphological issues that govern the thermal transitions of the blends. Poly(ethylene oxide)/lauric acid and poly(ethylene oxide)/stearic acid blends show high values of heat of melting and heat of crystallisation which exceed theoretically determined values - it is a synergistic effect that is advantageous in terms of energy storage. The PEO blends were investigated by PLM, SEM, AFM, WAXD, SAXS and ¹H NMR techniques - PLM, SEM and AFM allows to observe regions, in which parallelly-packed crystals of fatty acid are present. WAXD results of PEO/fatty acid blends confirmed hindered crystallization of PEO in PEO/fatty acid blends and, finally, lower degree of polymer crystallinity. The NMR study shows that mixing of PEO and lauric acid results in an increase of PEO amorphous phase content in blends as compared to the pure PEO. From FTIR spectra, taken during melting and crystallization, it can be seen that for both investigated blends in the solid state there is only one maximum of band from ν(CO) (in position indicating that CO groups are engaged in formation of hydrogen bonds), while in the liquid state there are two maxima - position of the first maximum is characteristic for ν(CO) vibrations of CO groups that do not participate in formation of hydrogen bond, whereas position of the second maximum in the liquid state proves the presence of CO groups involved in formation of hydrogen bonds. Solid state NMR analysis reveals no esterification reactions between PEO and fatty acid.     

Molecular weight dependence of phase behavior of PEO/P(EO‐b‐DMS) blends: Application of Sanchez‐Lacombe lattice fluid theory

Molecular weight dependence of phase separation behavior of the Poly (ethylene oxide) (PEO)/Poly(ethylene oxide‐block‐dimethylsiloxane) (P(EO‐b‐DMS)) blends was investigated by both experimental and theoretical methods. The cloud point curves of PEO/P(EO‐b‐DMS) blends were obtained by turbidity method. Based on Sanchez‐Lacombe lattice fluid theory (SLLFT), the adjustable parameter, (quantifying the interaction energy between different components), was evaluated by fitting the experimental data in phase diagrams. To calculate the spinodals, binodals, and the volume changes of mixing for these blends, three modified combining rules of the scaling parameters for the block copolymer were introduced. The calculated binodals with those modified combining rules show good agreement with the experimental data. Furthermore, the calculated volume changes during mixing decrease with increasing molecular weight of PEO, and the relationship between the volume changes and temperature is quite different for the mixtures with different molecular weight of PEO. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 452–459, 2008     

Optimization of a novel headspace–solid‐phase microextraction–gas chromatographic method by means of a Doehlert uniform shell design for the analysis of trace level ethylene oxide residuals in sterilized medical devices

Medical devices sterilized by ethylene oxide (EtO) retain trace quantities of EtO residuals, which may irritate patients' tissue. Reliably quantifying trace level EtO residuals in small medical devices requires an extremely sensitive analytical method. In this research, a Doehlert uniform shell design was utilized in obtaining a response surface to optimize a novel headspace–solid‐phase microextraction–gas chromatographic (HS‐SPME‐GC) method developed for analyzing trace levels of EtO residuals in sterilized medical devices, by evaluating sterilized, polymer‐coated, drug‐eluting cardiovascular stents. The effects of four independent experimental variables (HS‐SPME desorption time, extraction temperature, GC inlet temperature and extraction time) on GC peak area response of EtO were investigated simultaneously and the most influential experimental variables determined were extraction temperature and GC inlet temperature, with the fitted model showing no evidence of lack‐of‐fit. The optimized HS‐SPME‐GC method demonstrated overall good linearity/linear range, accuracy, repeatability, reproducibility, absolute recovery and high sensitivity. This novel method was successfully applied to analysis of trace levels of EtO residuals in sterilized/aerated cardiovascular stents of various lengths and internal diameter, where, upon heating, trace EtO residuals fully volatilized into HS for extraction, thereby nullifying matrix effects. As an alternative, this novel HS‐SPME‐GC method can offer higher sensitivity compared with conventional headspace analyzer‐based sampling. Copyright © 2009 John Wiley & Sons, Ltd.     

Graphene‐doped electrochemical copolymer coating of 2,2‐bithiophene and 3‐methylthiophene for the highly effective solid‐phase microextraction of volatile benzene homologues

We report the electrochemical fabrication of a poly(2,2‐bithiophene‐co‐3‐methylthiophene)‐graphene composite coating and its application in the headspace solid‐phase microextraction and gas chromatography determination of benzenes (i.e., bromobenzene, 4‐bromotoluene, 2‐nitrotoluene, 3‐nitrotoluene and 1,2,4‐trichlorobenzene). The coating was uniform and showed cauliflower‐like microstructure. It had high thermal stability (up to 375°C) and could be used for at least 180 times of solid‐phase microextraction without a decrease in extraction performance. Furthermore, it presented high extraction capacity for the benzenes due to the hydrophobic effect and π–π interaction between the analytes and the coating. Under optimized extraction conditions, good linearity (correlation coefficients higher than 0.9946), wide linear range (0.01–50 μg/L), and low limits of detection (5.25–12.5 ng/L) were achieved for these analytes. The relative standard deviation was lower than 5.7% for five successive measurements with one fiber, and the relative standard deviation for fiber‐to‐fiber was 4.9–6.8% (n = 5). The solid‐phase microextraction and gas chromatography method was successfully applied for the determination of three real samples, and the recoveries for standards added were 89.6–106% for nail polish, 85.8–110% for hair dye, and 90–106.2% for correction fluid, respectively.     

Dispersive solid–liquid phase microextraction based on nanomagnetic Preyssler heteropolyacid: A novel method for the preconcentration of nortriptyline

In this study, a new, simple, rapid, and efficient method combined with ultraviolet visible spectrophotometry and high‐performance liquid chromatography analysis was developed for the extraction and determination of nortriptyline. The tendency of the Preyssler tungsten heteropolyacid, H₁₄[NaP₅W₃₀O₁₁₀], immobilized on the surface of mesoporous nanomagnetite to adsorb the drug from the solution has been investigated. This method involves the use of an appropriate mixture of nanosorbent that was homogenized in disperser solvent (1.0 mL, ethanol). At first, the mixture containing the nanomagnetic sorbent and disperser solvent was injected into the aqueous sample, and a cloudy solution was formed. Subsequently, separation of the two phases was carried out using a magnet. In the second stage, analyte was desorbed from the sorbent by methanol as the optimal desorption solvent using sonication method. The elution solvent containing enriched analyte was introduced to the instruments for further analysis. Optimization of experimental conditions with respect to the extraction efficiency was investigated. The method was linear in the range of 25–5000, while the detection limit (LOD = 3S_B/m) was 7.9 ng/mL and the limit of quantification (LOQ = 10S_B/m) was 26.4 ng/mL. The relative standard deviation was 4.66%. The method was successfully applied to human hair samples.     

STRUCTURE AND PROPERTIES OF P(MMA-MAA)/PEO INTERMACROMOLECULAR COMPLEX FORMED THROUGH HYDROGEN BONDING

The superstructure and properties of polymers might be improved and enhanced througl intermolecular complexation. In this paper, the preparation, structure and properties of P(MMA-MAA)/PEO intermolecular complex through hydrogen bonding are studied. By acid hydrolysis of PMMA, a series of P(MMA-MAA) copolymers have been prepared, the MAA content of which depends on the temperature and time of hydrolyzation. In case the MAA content in P(MMA-MAA) is beyond 0.4 mole fraction, the hydrogen bonding between P(MMA-MAA) and PEO is strong enough to form intermolecular complex. The supermolecular structure of the complex is quite different from that of its constituent, which was observed by an X-ray diffraction and transmission electron microscope. The crystallization of PEO is confined owing to complexation. The complex exhibits quite a lot of good properties in thermal stability, gas permeability as well as mechanical strength, and could be used in many fields.     

Determination of monocyclic aromatic amines using headspace solid‐phase microextraction based on sol–gel technique prior to GC

In this research, the headspace solid‐phase microextraction (SPME) coupled with GC flame ionization detector was applied for the determination of some monocyclic aromatic amines in real water and urine samples. A sol–gel technique was applied for the preparation of the SPME fibers. Two different sol–gel coatings, (PEG and poly(ethylene glycol) modified with multi‐walled carbon nanotubes [PEG/CNTs]), were prepared and compared. Extraction efficiency of PEG/CNTs was better than PEG fiber in the same conditions. To obtain maximum extraction efficiency, some parameters such as desorption temperature and time, temperature and time of extraction, salt effect, pH, and stirring speed were investigated and optimized for PEG/CNTs fiber. Under optimized conditions, the LODs (S/N = 3) were in the range of 0.5–50 ng/L and limits of quantification (S/N = 10) were between 1 and 500 ng/L. Repeatability (n = 5) was in the range of 3.2–9.1% and reproducibility (n = 3) was obtained from 5.5 to 12.0%. The method was successfully applied to the analysis of real water and urine samples with recoveries from 63.7 to 97.0%.     

PEO／PBHE共混体系X射线散射研究

在聚环氧乙烷(PEO)/聚双酚A羟基醚(PBHE)共混体系中PEO是一个强质子受体,而PBHE是一个强质子给体,两者极易形成氢键,十分有利于形成互容对。笔者研究了PEO/PBHE共混体系的相容性,等温及非等温结晶动力学,本文根据Vonk提出的一维电子密度相关函数,分析了PEO/PBHE的SAXS现象,求得了共混体系的结晶度,片晶层厚度,过渡层厚度及长周期等结构参数。     

Poly(ethylene oxide)/poly(2vinylpyridne)/lithium perchlorate blends as solid polymer electrolytes: Composition/property/structure interrelationship

Poly(ethylene oxide) (MW 600,000)/poly(2vinylpyridine) (MW 200,000)/LiClO₄ blends have been prepared by the solution blending process. The ionic conductivities of the blends containing lower weight fractions (15, 17.5, 20 and 22.5%) of poly (2vinylpyridine) initially increases as the salt content is increased, reaches a maximum at an ethylene oxide/Li⁺ mole ratio of 10 and decreases as the salt content is further increased. Blends, which have higher weight fractions of poly(2vinylpyridine) (25 and 35%) display different electric behavior, i.e., the ionic conductivity continously increased as the salt content is increased to an ethylene oxide/Li⁺ mole ratio of 2. Thermal, ⁷Li solidstate NMR and semiempirical MNDO molecular orbital studies indicate that this contrasting behavior may be explained by the structure and ratios of the solvates (mixed solvate or homosolvate) of LiClO₄ present in the blends. © 1995 John Wiley & Sons, Inc.     

Chitin–cellulose blends: phase properties in dimethylacetamide–LiCl

Chitin–cellulose blends dissolved in dimethylacetamide containing LiCl (7% w/w) have been studied in a wide concentration range, from very dilute solutions to medium concentrations and up to solid films (absence of diluent). The intrinsic viscosities at various chitin–cellulose ratios, as well as the phase diagram behavior, imply a good compatibility between the components. The result is confirmed by the infrared measurements on solid films. The lack of anisotropic phase formation in chitin–diluent binary solutions and the anomalous trend of v′_CH–CE line on the phase diagram are both interpreted on the basis of aggregation phenomena.     

Exploring multiple‐cumulative trapping solid‐phase microextraction for olive oil aroma profiling

Headspace solid‐phase microextraction is a solvent‐free sample preparation technique that is based on the equilibrium among a three‐phase system, i.e., sample‐headspace‐fiber. A compromise between sensitivity and extraction time is usually needed to optimize the sample throughput, especially when a large number of samples are analyzed, as usually the case in cross‐samples studies. This work explores the capability of multiple‐cumulative trapping solid‐phase microextraction on the characterization of the aroma profiling of olive oils, exploiting the automation capability of a novel headspace autosampler. It was shown that multiple‐cumulative solid‐phase microextraction has the potential to improve the overall sensitivity and burst the level of information for cross‐sample studies by using cumulative shorter extraction times.     

Sulfonated poly(styrene‐divinylbenzene) modified with amines and the application for pipette‐tip solid‐phase extraction of carbendazim in apples

Sulfonated poly(styrene‐divinylbenzene) modified with five kinds of amine functional groups was applied to the determination of carbendazim in apple samples with a pipette‐tip solid‐phase extraction method. The structures of the polymers were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, and thermogravimetric analysis. Five different modifications of the solid‐phase extraction sorbent based on sulfonated poly(styrene‐divinylbenzene) were tested under static and pipette‐tip solid‐phase extraction conditions. The polymer modified with p‐methoxyaniline showed the best recognition capacity and adsorption amount for carbendazim. Under the optimum conditions, 3.00 mg of the adsorbent, 1.00 mL of ethyl acetate as washing solvent, and 1.00 mL of ammonia/acetonitrile (5:95, v/v) as elution solvent were used in the pretreatment procedure of apple samples. The calibration graphs of carbendazim in methanol were linear over 5.00–200.00 μg/mL, and the limits of detection and quantification were 0.01 and 0.03 μg/mL, respectively. The method recoveries of carbendazim were in the range of 91.31–98.13% with associated intraday relative standard deviations of 0.76–2.13% and interday relative standard deviations of 1.10–1.85%. Sulfonated poly(styrene‐divinylbenzene) modified with p‐methoxyaniline showed satisfactory results (recovery: 97.96%) and potential for the rapid purification of carbendazim in apple samples combined with the pipette‐tip solid‐phase extraction.     

Polyamide‐6,6‐based blocky copolyamides obtained by solid‐state modification

Copolyamides based on polyamide‐6,6 (PA‐6,6) were prepared by solid‐state modification (SSM). Para‐ and meta‐xylylenediamine were successfully incorporated into the aliphatic PA‐6,6 backbone at 200 and 230 °C under an inert gas flow. In the initial stage of the SSM below the melting temperature of PA‐6,6, a decrease of the molecular weight was observed due to chain scission, followed by a built up of the molecular weight and incorporation of the comonomer by postcondensation during the next stage. When the solid‐state copolymerization was continued for a sufficiently long time, the starting PA‐6,6 molecular weight was regained. The incorporation of the comonomer into the PA‐6,6 main chain was confirmed by size exclusion chromatography (SEC) with ultraviolet detection, which showed the presence of aromatic moieties in the final high‐molecular weight SSM product. The occurrence of the transamidation reaction was also proven by ¹H nuclear magnetic resonance (NMR) spectroscopy. As the transamidation was limited to the amorphous phase, this SSM resulted in a nonrandom overall structure of the PA copolymer as shown by the degree of randomness determined using ¹³C NMR spectroscopy. The thermal properties of the SSM products were compared with melt‐synthesized copolyamides of similar chemical composition. The higher melting and higher crystallization temperatures of the solid state‐modified copolyamides confirmed their nonrandom, block‐like chemical microstructure, whereas the melt‐synthesized copolyamides were random. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5118–5129     

Polyvinylimidazole/sol–gel composite as a novel solid‐phase microextraction coating for the determination of halogenated benzenes from aqueous solutions

A polyvinylimidazole/sol–gel composite is proposed as a novel solid‐phase microextraction fiber to extract five halobenzenes from the headspace of aqueous solutions in combination with gas chromatography with mass spectrometry. The prepared fiber was characterized by scanning electron microscopy and Fourier transform infrared spectroscopy. The obtained results showed that porous polyvinylimidazole/sol–gel composite was chemically deposited on fused silica fiber. The effect of important extraction parameters including extraction temperature, extraction time, and salt content were investigated. The optimum conditions were as follows: extraction temperature 25°C, extraction time 20 min, and salt concentration 30 w/v%. Detection limits and relative standard deviations of the developed method for halogenated benzenes were below 0.1 pg/mL and 15%, respectively. Repeatability of the proposed method, explained by relative standard deviation, varied between 5.48 and 9.15% (n = 5). The limits of detection (S/N = 3) ranged between 0.01 and 0.10 ng/L using gas chromatography with mass spectrometry with selected ion monitoring mode. For real sample analysis, three types of water samples with different matrices (ground, surface, and tap water) were studied. The optimized procedure was applied to extraction and method validation of halogenated benzenes in spiked water samples.     

Two‐step crystal–crystal phase transformation of N‐salicylidene‐p‐aminobenzoic acid by gas–solid reaction with aqua–ammonia vapour

Crystal–crystal phase transformation by external stimuli has attracted significant attention for application in switchable materials, which can change their structures and properties. Herein, it is revealed that N‐salicylidene‐p‐aminobenzoic acid crystals undergo a two‐step crystal–crystal phase transformation through a gas–solid reaction with aqua–ammonia vapour. The photochromic behaviour of the crystals switched from nonphotochromic to photochromic and back to nonphotochromic via a phase transformation. The two‐step phase transformation and photochromic behaviour change were characterized and correlated by X‐ray crystal structure analysis, UV–Vis spectroscopy, differential scanning calorimetry and scanning electron microscopy. This article is the first report to capture the stepwise structural change in the gas–solid (acid–base) reaction of ammonia with benzoic acid derivatives.     

Li1.3Al0.3Ti1.7(PO4)3 filler effect on (PEO)LiClO4 solid polymer electrolyte

Composite polymer electrolyte (CPE) films consisting of PEO, LiClO₄, and Li_1.3Al_0.3Ti_1.7(PO₄)₃ with fixed EO/Li = 8 but different relative compositions of the two lithium salts were prepared by the solution casting method. The CPE films were characterized using SEM, DSC, electrical impedance spectroscopy (EIS), and ion transference number measurement. It was found that the incorporation of LiClO₄ and Li_1.3Al_0.3Ti_1.7(PO₄)₃ into PEO by keeping EO/Li = 8 reduced the crystallinity of PEO from 50.34% to the range of 3.57–15.63% depending upon the relative composition of the two salts. The room temperature impedance spectra of the CPE films all exhibited a shape of depressed semicircle in the high frequency range and inclined line in the low frequency range, but the high temperature ones were mainly inclined lines. The Li⁺ ionic conductivity of the CPE films mildly increased and then decreased with increasing Li_1.3Al_0.3Ti_1.7(PO₄)₃ content, and the maximum conductivities were obtained at Li_1.3Al_0.3Ti_1.7(PO₄)₃ content of 15 wt % for all measuring temperatures, for example, 1.378 × 10^?3 S/cm at 100 °C and 1.387 × 10^?5 S/cm at 25 °C. The temperature dependence of the ionic conductivity of the CPE films follows the Vogel–Tamman–Fulcher (VTF) equation The pseudo activation energies (E_a) were rather low, 0.053–0.062 eV, indicating an easy migration of Li⁺ in the amorphous phase dominant PEO. The pre‐exponent constant A and ion transference number t_Li+ were found to have a similar variation tendency with increasing Li_1.3Al_0.3Ti_1.7(PO₄)₃ content and reached their maximums also at Li_1.3Al_0.3Ti_1.7(PO₄)₃ content of 15 wt %. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 743–751, 2005     

Analysis of polybrominated diphenyl ethers in sewage sludge by matrix solid‐phase dispersion and isotope dilution GC–MS

A method for the determination of 14 polybrominated diphenyl ethers (PBDEs) in sludge from wastewater treatment plants is presented. PBDEs were extracted by matrix solid‐phase dispersion assisted by sonication and determined by isotope dilution gas chromatography with electron impact mass spectrometric detection in the selected ion monitoring mode, using labelled ¹³C‐PBDEs as internal standards. The limits of detection and quantification for the tri‐ to hepta‐BDEs were in the range of 0.05 to 0.5 ng/g dry weight and 0.15 to 1.8 ng/g dry weight, respectively, and 1.6 ng/g dry weight and 5.6 ng/g dry weight for deca‐BDE‐209. The proposed analytical method was applied to determine PBDE levels in sewage sludge samples collected from 19 water treatment plants located in the province of Madrid (Spain). In all of the examined samples, BDE‐100 and BDE‐154 were the main compounds found with a mean concentration of 3.9 and 2.0 ng/g, respectively. PBDEs were detected in all of the samples, and their total concentrations not considering BDE‐209 were between 3.9 and 23.0 ng/g dry weight. The dominant PBDE congener in sewage sludge was BDE‐209, which constituted 38.7 to 97.3% of the total, and showed concentration levels ranging from 8.1 to 717.2 ng/g dry weight.     

Ultrasound‐assisted magnetic dispersive solid‐phase microextraction: A novel approach for the rapid and efficient microextraction of naproxen and ibuprofen employing experimental design with high‐performance liquid chromatography

A simple, rapid, and sensitive method for the determination of naproxen and ibuprofen in complex biological and water matrices (cow milk, human urine, river, and well water samples) has been developed using ultrasound‐assisted magnetic dispersive solid‐phase microextraction. Magnetic ethylendiamine‐functionalized graphene oxide nanocomposite was synthesized and used as a novel adsorbent for the microextraction process and showed great adsorptive ability toward these analytes. Different parameters affecting the microextraction were optimized with the aid of the experimental design approach. A Plackett–Burman screening design was used to study the main variables affecting the microextraction process, and the Box–Behnken optimization design was used to optimize the previously selected variables for extraction of naproxen and ibuprofen. The optimized technique provides good repeatability (relative standard deviations of the intraday precision 3.1 and 3.3, interday precision of 5.6 and 6.1%), linearity (0.1–500 and 0.3–650 ng/mL), low limits of detection (0.03 and 0.1 ng/mL), and a high enrichment factor (168 and 146) for naproxen and ibuprofen, respectively. The proposed method can be successfully applied in routine analysis for determination of naproxen and ibuprofen in cow milk, human urine, and real water samples.